Professional Documents
Culture Documents
GD&T 1) GEOMETRIC DIMENSIONING AND TOLERANCING IS A METHOD OF STATING AND INTERPRETING DESIGN REQUIREMENTS.
2) IT IS A TOOL AVAILABLE TO MAKE COMMUNICATION BETTER BETWEEN DESIGNER AND MANUFACTURER, INSPECTION.
5/4/2012
basic of GD&T
5/4/2012
basic of GD&T
OLD PRACTICE
5/4/2012
basic of GD&T
GD&T IS COMBINATION OF SYMBOLS, MODIFIERS, TOL. VALUES & DATUMS --- IS CALLED FEATURE CONTROL FRAME (FCF)
5/4/2012
basic of GD&T
RULES IN GD&T:RULE #1 - WHEN ONLY A TOLERENCE OF SIZE IS SPECIFIED, THAT CONTROLS BOTH SIZE AND FORM.
5/4/2012
basic of GD&T
RULE #2 - RFS IS IMPLIED FOR ALL GEOMETRIC TOLERANCE. RULE #2a - RFS MAY BE SPECIFIED ON THE DRAWING W.R.T. INDIVIDUAL TOL., DATUM REF., OR BOTH AS APPLICABLE.
5/4/2012
basic of GD&T
RULE #3 - FOR SCREW THREADS, SPLINES AND GEARS THE TOLERANCE AND DATUM REFERENCE ORIGINATE FROM PITCH CYLINDER AXIS.
RULE #4 - A VIRTUAL CONDITION EXISTS FOR A DATUM FOS WHERE ITS AXIS OR CENTRE LINE IS CONTROLLED BY A GEOMETRIC TOLERANCE.
5/4/2012 basic of GD&T 8
1) FOS - Feature Of Size 2) MMC - Maximum Material Condition 3) LMC - Least Material Condition 4) RFS - Regardless Of feature Size. 5) VC - Virtual Condition 6) TOP - Tolerance Of Position 7) BONUS TOLERANCE 8) DATUM
5/4/2012 basic of GD&T 9
1) FOS FEATURE IS A PHYSICAL PORTION OF A PART AND DIMENSION SHOWN TO THE PORTION IS CALLED FEATURE OF SIZE.
E.g. FEATURES
5/4/2012
2) MMC :MAXIMUM MATERIAL CONDITION IS A CONDITION IN WHICH FEATURE OF SIZE CONTAINS MAX AMOUNT OF MATERIAL
5/4/2012
basic of GD&T
11
3) LMC :LEAST MATERIAL CONDITION IN WHICH A FEATURE OF SIZE CONTAINS LEAST AMOUNT OF MATERIAL WITHIN THE STATED LIMITS OF SIZE.
5/4/2012
basic of GD&T
12
4) RFS REGARDLESS OF FEATURE SIZE IS A TEARM THAT INDICATES A GEOMETRIC TOLERANCE APPLIES AT ANY INCREMENT OF FEATURE WITHIN ITS SIZE TOLERANCE. OR RFS IS THAT THE GEOMETRIC TOLERANCE APPLIES AT WHATEVER SIZE OF PART IS PRODUCED
RFS applies, with respect to the individual tolerance, datum reference, or both, where no modifying symbol is specified. RFS does not permit bonus tolerance.
5/4/2012 basic of GD&T 13
5/4/2012
basic of GD&T
14
When & Where apply Modifiers like MMC, LMC & RFS. 1) MMC - When function of FOS is Assembly
2) LMC - When function of FOS is to ensure MIN distance on a part 3) RFS - To ensure symmetrical relationship.
5/4/2012
basic of GD&T
15
5) VC - Virtual Condition- VC is a collective action of FOS at MMC or at LMC and geometric tolerance for that material condition.
INNER BOUNDRY (IB) = LMC + GEOMETRIC TOL
5/4/2012
basic of GD&T
16
WORST CASE BOUNDRY (WCB) = TERM REFERS TO THE EXTREME BOUNDRY OF A FOS THAT IS THE WORST FOR ASSEMBLY. e.g.
5/4/2012
basic of GD&T
17
5/4/2012
basic of GD&T
18
5/4/2012
basic of GD&T
19
LMC Virtual Condition :- When a LMC modifier is applied in a FCF of FOS, the VC of FOS is affected. A) In case of External Feature VC = LMC - GEOMETRIC TOLERANCE
5/4/2012
basic of GD&T
20
5/4/2012
basic of GD&T
21
5/4/2012
basic of GD&T
22
6) Tolerance Of Position :- TOP is a geometric tolerance that defines the location tolerance of a FOS from its true position.
a) TOP can aplly with RFS, MMC & LMC. Theoretically exact location defined of FOS is defined by basic dimensions is called TRUE POSITION of the FOS
5/4/2012
basic of GD&T
23
5/4/2012
basic of GD&T
24
5/4/2012
basic of GD&T
25
d) TOP using Projected Tol. Zone - Projected tolerance zone is tolerance zone that is projected above the part surface.
5/4/2012
basic of GD&T
26
5/4/2012
basic of GD&T
27
e) PLTZF & FRTZF used to define pattern type features. PLTZF - PATTERN LOCATING TOLERANCE ZONE FRAME WORK. It restricts the zone in which the entire pattern of features can be located FRTZF - FRAME RELATING TOLERANCE ZONE FRAME WORK. This tolerance is tighter & restricts the relationship of individual feature location with each other within the pattern.
5/4/2012
basic of GD&T
28
5/4/2012
basic of GD&T
29
7) BONUS TOLERANCE
- Bonus tolerance is an additional tolerance for a geometric control. - Bonus tolerance is only permissible when at MMC (or LMC) modifier is shown in the tolerance portion of a FCF - Bonus tolerance comes from FOS tolerance.
5/4/2012
basic of GD&T
30
8) DATUM a) Implied Datum- Implied Datums are imaginary plane, axis or centre point from measurement is made
5/4/2012
basic of GD&T
31
Consequence of Implied plane 1) Good parts may reject 2) Rejected parts may accept
b) Planer Datum - A datum is a theoretically exact plane from which dimensions is made. A datum feature is a part feature that contacts a datum. A Planer Datum is the true geometrical counterpart of a planer datum feature.
5/4/2012
basic of GD&T
33
How to decide datum sequence- When FCF refers datum, the sequence is determined by reading the FCF from left. The first compartment that contains a datum reference denotes the datum feature that is to contact the inspection equipment first, second datum feature with second inspection equipment & third with third.
5/4/2012
basic of GD&T
34
5/4/2012
basic of GD&T
35
5/4/2012
basic of GD&T
36
5/4/2012
basic of GD&T
37
5/4/2012
basic of GD&T
38
5/4/2012
basic of GD&T
39