Professional Documents
Culture Documents
1 2 3 4 5 6 go to ftp://144.16.106.78 use ftp clients like WS FTP or CUTE FTP PTCPRO-EWIN2000-NT4 setup search the file hosts in C: open hosts in NOTEPAD/WORDPAD at the bottom of the file hosts write 144.16.106.78 cc-001
1. What is Pro-E???
It is one of the most widely used CAD/CAM software in todays world This tool is provided by PTC and the website is www.ptc.com Pro-E runs on a Windows 95, Windows 2000, Windows NT or UNIX platform.
2. Introduction to Pro-E
Earlier, engineering designs were constructed with 2D drawings. Now, engineering drawings are represented by mathematical solid models instead of as 2D drawings.
Two main reasons for the move from 2D models to solid 3D models
1. The solid model can be understood even by nontechnical members of the team, such as those from marketing and sales department. 2. The capabilities of solid modellers have been upgraded so that the model can represent not only the geometry of the part being designed, but also the intent of the designer.
Pro-E Interface
Application Manager Message Area Menu Bar Right Toolbar Menu Manager
Top Toolbar
Model Tree
Protrusions.
A protrusion is always the first solid feature created. This can be the base feature or the first feature created after a base feature of datum planes. To create an extruded protrusion: 1. Choose Feature from the PART menu, and the choose Create from the FEAT menu. 2. Choose Protrusion from the SOLID menu. 3. Choose Extrude=>Solid=>Done=> from the SOLID options menu. 4. Pro/E displays PROTRUSION : Extrude dialog box, which lists The elements needed for creating this type of protrusion. 5. Pro/E displays ATTRIBUTES menu, which lists the following Options:
(a) One Side Creates the feature of one side of the sketching plane. (b) Both Sides Creates the feature on both sides of the sketching Plane. 6. Choose One side or Both Sides=> Done from ATTRIBUTES menu. 7. Select the sketching plane. 8. Sketch the protrusion.
a circle
a square
Cuts
To remove material from a part, we use the following features. 1. Choose Feature from the PART menu, and then choose Create From the FEAT menu. 2. Choose Cut from the SOLID menu. 3. Choose Extrude=>Solid=>Done (SOLID OPTS menu). 4. The appropriate dialog box is displayed. 5. Choose One Side or Both Sides=> Done (ATTRIBUTES menu). 6. Select the sketching plane on the part and the parts orientation. 7. Accept the cut direction or flip the arrow. 8. Determine the depth of the cut
a rectangular parallelepiped
4. Holes
Another variety of geometric construction which is accomplished by Pro/E are holes. This is a pick and place feature, because they are created automatically from your input and placed according to prompts by Pro/E. A hole can also be created using a Cut, but it must be sketched.
5. 6. 7. 8. 9.
Select the first reference (edge, surface, axis or datum). Enter the distance from the first reference in the message area. Select the second reference. Enter the distance from the second reference in the message area. Pro/E displays SIDES menu. Choose One Side or Both Sides, then Done. 10. Select the extent to which the hole will be created. 11. Select OK in the dialog box to create the hole.
EXAMPLE (i) A solid body (ii) A solid body with a full length coaxial hole. (iii) A solid body with a variable length coaxial hole. (i)
(ii)
(iii)
5. Rounds
Round creates a fillet, or a round on a edge, that is smooth transition with a circular profile between two adjacent surfaces.
Following are three simple types of rounds. 1. Edge-Surface rounds
2. Surface-Surface rounds