Professional Documents
Culture Documents
TELEVISION SYSTEM
GREENFIELD TOWER 1
Mayflower St. Mandaluyong City
CATEGORIES
System Description
System Operation
System Maintenance
SYSTEM DESCRIPTION
A. Type of System including control concepts
The surveillance system has 230 units of dome type camera, 9 units
of PTZ camera that are strategically placed to common areas, to ensure
minimal latency a fiber optic back bone is installed at each IDF’s homerun
to Control Room/Security Room
Types of Camera
A. Recommended strategy
for operating and control
There should be a level of
security in system
administration
i U
E. Start-up, running and shutdown procedures
start-up
STEP 1 - Connect the provided power cord to the power cord inlet on the rear
panel of the recorder, and insert the power plug to an outlet whose rating is as
follows.
WJ-NV300K: 120 V AC, 60 HZ
WJ-NV300K/G: 220 V - 240 V AC, 50 HZ/60 HZ
STEP 2 - Connect the provided mouse to the mouse connection port on
the rear side of the recorder.
-------The mouse cursor will be displayed on the main monitor.
STEP 3 - Left-click the desired buttons and tabs on the screen. (Hereinafter,
"left-click..." Will be described as "click..." In this document.)
Step 4 - Click the [Setup] button.
---- The top screen of the setup
menu will be displayed
--- If a setting window is in a list form
and the [C] button exists on the title column,
it is possible to change all the settings
in the same row at the same time.
Shutdown procedure
13
Operation Window’s structure
Menu Bar Operation Window
Tool Bar
Status Bar
Information
display
area
Function Panel
Image
display
area
14
Operation Panel
Camera Control
Camera control can be done such as adjustment of display position,
zooming and focusing by operating the camera during live display. *1
Pan/Tilt *2 : Adjust the camera position horizontally or vertically.
Zoom : The camera images expand or they are reduced.
Focus : The focus of the camera images are adjusted.
Brightness : The diaphragm of the lens is adjusted.
Preset *2 : Select a preset number from the following.
When the [Program] button is clicked after selecting a preset number, the current position
will be registered as the preset position of the selected preset position number.
Auto mode : Selected auto mode function is activated.
AUX : The device that is connected to the AUX terminal is open or closed.
*1 There is a case that the operation can not be done depending types of
camera.
*2 This can work for PTZ dome cameras.
15
Playback
16
Event Notification
A event notification message window is popped up to provide a
notification message of a device error, a network error occurrence or an
message that an error is recovered. Several actions will take place to
notify an error occurred or has been recovered.
Multiscreen
Group select
Sequence
selection
(start/stop)
AUX open/close Camera Control
-Pan/Tilt
-Zoom
-Focus
-Auto pan on/off
-Auto track on/off
ZOOM
(Slide Volume)
User Management
• There are two types of users : Administrator and Registered user.
• Setting user management can be done only by the administrator.
• A customized menu is displayed according to the level defined for a registered user.
Registered User
ITEM Administrator LV1 LV2 LV3 LV4 LV5
22
The nature of deterioration and the defect to be look for.
Symptom Cause/solution
• Is the power plug connected to the outlet
firmly? Confirm the cable is firmly connected.
Power is not turned on.
• Check if the power cord is properly inserted into the
power socket of the recorder.
Check if it is connected firmly.
• Is the lens cap of the camera detached from the
camera? Check whether the lens cap is removed.