Professional Documents
Culture Documents
Place:
M2, ICT PERDA-TECH
Class Schedule:
Compulsory Hour:
Monday 1000-1300 (3.00 hours)
Tuesday 0900-1300 (4.00 hours)
CLASS RULES
LESSON PLAN
TIPS
CLASS RULES
CPD 1023 : ADVANCED IN
SOLID MODELING
CLASS RULES: 1
Do:
1- Comes 5 minutes early before class
start
2- Pay full attention to class lecture and
training
3- Bring all class notes/ products/
drawings/documentations relate to
class subject
4- Cooperate to class lesson especially to
group members and lecturer
CLASS RULES: 1
Do:
5- Line up, Greetings/salam and read doa
before and after class started/end
6- Class leader/Sarjan need to report class
attendant before class started
7- Before class end, make sure:
i- shut down PC
ii-switch off plugs and air-conds
iii- sweep floor
iv- clean white-board
v- empty dustbin
CLASS RULES: 1
Don’t:
1- Answering calls/ texting SMS during
class
2- Playing around and disturbing others
3- Opening laptop/notebook without
permission
4- Do other jobs or task which not
related to class subject
LESSON PLAN
CPD 1023 : ADVANCED IN
SOLID MODELING
Lesson Plan CPD 1024 2
Rationale for the inclusion of the 4
course/module in the program :
Advanced in 3D Solid Modeling for product
design application
Prerequisite : 8
Introduction to Solid Modeling (CPD 1013)
Credit Value : 3 7
Lesson Plan CPD 1023 (Cont.) 2
Total student Learning Time(SLT ) : 6
120 hours / 1session
1 credit = 40 Hours
3 credit = 3 x 40
= 120 Hours