You are on page 1of 25

COMPLETED

2018 Mid-Year Review & Planning Conference PROJECTS

COMPLETED PROJECTS (6)


Internal / GIA - 1 Joint/Contract Research – 5

CONTRACT RESEARCH
1.Development of an Improved Abaca Stripping Machine
2.Design Status
and Development of Trash
Report as of 22 October 2018Bin
based on Division
3.Design and Development of 50 Tonner Vertical Baler with
Semi-automatic Strapping
4.Design and Development of Hydraulic Waste Transfer Lifter
5.Development of Kato Katz Mold

INTERNAL R&D
1.Development of a ___ Ton Hydraulic Pipe Bender with
Movable Anvil
2018 Mid-Year Review & Planning Conference
PD
2018 Mid-Year Review & Planning Conference Scorecard

A.1 OUTCOME: 80% benefit incidence of intervention to target local


industries and/or institutions
A.1.1 No. of Scientific Papers Published (published papers should be
peer-reviewed)
 Design and Finite Element Analysis of Customized Local Road Vehicles (CLRV): The 1
Case for the Tricycle and the Philippine Jeepney
 Design of the Philippine Jeepney for Crashworthiness Analysis: A Finite Element
Analysis Approach

A.1.2 No. of Scientific Papers Prepared/Presented (papers prepared


must be presented in a national/international conference)
 Design and Finite Element Analysis of Customized Local Road Vehicles (CLRV): The 2
Case for the Tricycle and the Philippine Jeepney
 Design of the Philippine Jeepney for Crashworthiness Analysis: A Finite Element
Analysis Approach

A.1.3 No. of IPR Filed


3
- Note: 5 IPRs to be filed on November

A.1.3 No. of IPR Approved/Registered 1


 Wrought Iron Forming Equipment
PD
2018 Mid-Year Review & Planning Conference Scorecard

A.2 OUTCOME: Number of partnerships with public and private stakeholders


and international organizations
a. New MOU/MOA/CRA - 10 5
COMPLETED
2018 Mid-Year Review & Planning Conference PROJECTS

COMPLETED PROJECTS with MOU/MOA/PPP/CRA (3)

NAME OF
No TITLE OF MOU/MOA/PPP/CRA TYPE
PARTNER/BENEFICIARY/ COMPANY

Design and Development of


1 Equipment for Biomass Waste CRA Limetech Singapore
Management System

Development of an Improved Cooperative for American Relief


2 Portable Manual Abaca Fiber MOA Everywhere, Inc. (CARE)
Stripping Machine Philippines

Development of Mold for Kato Research Institute for Tropical


3 CRA
Katz Template Medicine (RITM)
ONGOING
2018 Mid-Year Review & Planning Conference PROJECTS

ONGOING PROJECTS FOR COMPLETION with


MOU/MOA/PPP/CRA (2)

NAME OF
No TITLE OF MOU/MOA/PPP/CRA TYPE
PARTNER/BENEFICIARY/COMPANY

Pre-Commercialization Services
Philippine Council for
of Rice Transplanter Attachment
Agricultural, Aquatic and Natural
1 (RTA) and Rice Harvester MOA
Resources Research and
Attachment (RHA) for Hand
Development (PCAARRD)
Tractor
Development of Ceramics
Department of Trade and
Equipment (12 Units Electric
2 MOA Industry – National Capital
Potter’s Wheel and 5 Units Jigger
Regional Office (DTI-NCRO)
and Jolly Machine)
NEW
2018 Mid-Year Review & Planning Conference PROJECTS

NEW PROJECTS FOR COMPLETION with


MOU/MOA/PPP/CRA (3)
NAME OF
No TITLE OF MOU/MOA/PPP/CRA TYPE
PARTNER/BENEFICIARY/COMPANY

Design Improvement of Gear


RollMaster Machinery and
1 Transmission System for Riding- MOA
Industrial Services Corporation
Type Rice Transplanter
NO KA OI Philippine
Development of Chemical Dosing
2 MOA International Incorporated
Equipment
(NKOIPII)

Improvement of Gong (1) PCIEERD


Fabrication Processes through (2) DOST-CAR
3 MOA
S&T Intervention in Mankayan, (3) Municipality of Mankayan,
Benguet Benguet (LGU-Mangkayan)
CARRYOVER
2018 Mid-Year Review & Planning Conference PROJECTS

2019 CARRYOVER PROJECTS with MOU/MOA/PPP/CRA (2)

NAME OF
No TITLE OF MOU/MOA/PPP/CRA TYPE
PARTNER/BENEFICIARY/COMPANY

(1) DENR-EMB-NCR
Roll-out and Improvement of
(2) DOST-NCR
1 Automatic Trash Rake for MOA
(3) City Government of Malabon
Malabon
(LGU-Malabon)
Capability Building for Enhancing
the Competitiveness of Die and (1) Board of Investment (BOI)
2 Mold Industry through the MOA (2) Philippine Die and Mold
Engagement of Foreign and Local Association, Inc. (PDMA)
Experts (DiMo GURU)
PD
2018 Mid-Year Review & Planning Conference Scorecard
A.3 OUTPUT: Number of projects completed (must have the project's
terminal report submitted)
a. Internal 4
b. Grant-In-Aid 4
c. Contract Research 10

A.4 OUTPUT: 95% of projects implemented within the approved timeframe


a. No. of Projects 18

A.5 OUTPUT: 70% of projects completed which are adopted by industry,


published in peer reviewed journals, presented in national
and/or international conferences or with IP filed or approved
a. Minimum no. of projects required to attain the 70% target) 13
b. Total target no. of projects (refer to A.4Output) 18
c. No. of products developed 10
ONGOING
2018 Mid-Year Review & Planning Conference PROJECTS

COMPLETED PROJECTS (7)


1. Design and Development of 50 Toner Vertical Baler with Semi-
Automatic Strapping
2. Design and Development of Hydraulic Waste Transfer Lifter
3. Design and Development of Trash Bin
4. Development of an Improved Portable Manual Abaca Fiber Stripping
Machine
5. Development of Mold Set for “Kato-Katz” Template
6. Development of 30 Ton Hydraulic Pipe Bender with Stationary Anvil
7. Development of a Sugarcane Juicer for Community-Based Organic
Muscovado Production
ONGOING
2018 Mid-Year Review & Planning Conference PROJECTS

ONGOING PROJECTS FOR COMPLETION (4)

8. Development of Ceramics Equipment: 12 Units Electric Potter’s Wheel


9. Development of Ceramics Equipment: 5 Units Jigger and Jolly Machine
10. Pre-commercialization Services of RTA and RHA for Hand Tractor
11. Design and Development of a 1 KW Pico Hydro Turbine

12. Development of Chemical Dosing Equipment


13. Piloting of Manual Abaca Stripping Machine
14. Design and Process Optimization for the Mass Production
of Shredder Blades
15. Design and Process Improvement of Stainless Steel Propeller
ONGOING
2018 Mid-Year Review & Planning Conference PROJECTS

NEW PROJECTS FOR COMPLETION (5)

16. Design Evaluation and Improvement Development of Muffler Die


17. Development of MIM Mold for GI Hammer of M1911 Pistol
18. Localization of Gear Tester for Spur and Helical Gears
19. Design and Simulation of eBIKE Gear Differential
PD
2018 Mid-Year Review & Planning Conference Scorecard

A.1 OUTCOME: 80% benefit incidence of intervention to target local


industries and/or institutions
A.1.1 No. of Scientific Papers Published (published papers should be
peer-reviewed)
 Design and Finite Element Analysis of Customized Local Road Vehicles (CLRV): The 1
Case for the Tricycle and the Philippine Jeepney
 Design of the Philippine Jeepney for Crashworthiness Analysis: A Finite Element
Analysis Approach

A.1.2 No. of Scientific Papers Prepared/Presented (papers prepared


must be presented in a national/international conference)
 Design and Finite Element Analysis of Customized Local Road Vehicles (CLRV): The 2
Case for the Tricycle and the Philippine Jeepney
 Design of the Philippine Jeepney for Crashworthiness Analysis: A Finite Element
Analysis Approach

A.1.3 No. of IPR Filed


3
- Note: 5 IPRs to be filed on November

A.1.3 No. of IPR Approved/Registered 1


 Wrought Iron Forming Equipment
ONGOING
2018 Mid-Year Review & Planning Conference PROJECTS

NEW PROJECTS FOR COMPLETION (3)

• Design Improvement of Gear Transmission System for Riding-Type Rice


Transplanter
• Improvement of Gong Fabrication Processes in Mankayan, Benguet

Note: With 3 MOU/MOA


2019 CARRYOVER
2018 Mid-Year Review & Planning Conference PROJECTS

2019 CARRYOVER PROJECTS (8)


1. Roll-out and Improvement of Automatic Trash Rake for Malabon
2. Improvement of Gong Fabrication Processes through S&T Intervention
in Mankayan, Benguet
3. Design and Development of Hand Tractor with Gear Transmission
4. Development of Rotary Table for Small and Medium Machine Shops
5. Industrial Design and Improvement of RHA/RTA
6. Design and Development of Automated Multi-level Parking (SPARKS)
7. Design and Development of Copra Dryer
8. Design and Development of Copra Expeller
9. Piloting and Precom. of 12HP Single Cylinder Diesel Engine
10. Project BUHAWI
PD
2018 Mid-Year Review & Planning Conference Scorecard

STAKEHOLDERS PERSPECTIVE
Strategy 1.2 Provide relevant support and equitable opportunity for
industry advancement
1.2.1 Strengthen partnership with the M&E Sectors
- No. of collaborative projects - 10 2
- No. of new services offered to the industry
 Gear Hobbing
 Gear Shaping
 Gear Shaving 4
 Broaching
 Dynamic Balancing
PD
2018 Mid-Year Review & Planning Conference Scorecard

STAKEHOLDERS PERSPECTIVE
Strategy 1.2 Provide relevant support and equitable opportunity for
industry advancement
1.2.3 Implement industry-focused research and development
programs
- No. of consultations w/ industry for R&D related industry needs
 MIRDC
 PHIL. NAVY
 ARMSCOR 5
 Region VIII
 MMIEERDC
 MIRDC (PhilCAM)
- No. of externally approved R&D project proposals
 Joint Research Projects - 3 2
 Contract Research Projects - 12
PD
2018 Mid-Year Review & Planning Conference Scorecard

STAKEHOLDERS PERSPECTIVE
Strategy 1.2 Provide relevant support and equitable opportunity for
industry advancement
1.2.4 Implement exemplary science and technology services
- Percent utilization rate of facilities
- c/o TSS
Strategy 1.4 Build enduring relationships
1.4.1 Increase engagements (Improved industry participation)
- No. of industry associations with representation
 PDMA
 MRSP 3
 PSNT
 PWS
- % participation to activities of industry associations
95%
 100%
PD
2018 Mid-Year Review & Planning Conference Scorecard
INTERNAL PERSPECTIVE
2.3.2 Collaborate with international institutions for research and
manpower development
- No. of projects implemented/completed with international
institutions and technology partners 1
 3 (LIMETECH, Singapore)

LEARNING AND GROWTH PERSPECTIVE

FINANCIALPERSPECTIVE

ADDITIONAL DOST INDICATORS


- No. of product/process/equipment developed 10
PD
2018 Mid-Year Review & Planning Conference Scorecard

ADDITIONAL DOST INDICATORS


(No. of product /process/equipment developed)
1 50 Toner Vertical Baler with Semi-Automatic Strapping
2 Hydraulic Waste Transfer Lifter
3 Trash Bin
4 Portable Manual Abaca Fiber Stripping Machine
5 30 Ton Hydraulic Pipe Bender with Stationary Anvil
6 Sugarcane Juicer
7 Electric Potter’s Wheel
8 Jigger and Jolly Machine
9 1kw Pico Hydro Turbine
10 Gong
11 Chemical Dosing Equipment
12 Transmission System for Rice Transplanter
PROPOSED
2018 Mid-Year Review & Planning Conference PROJECTS
PROJECT TITLE PARTNER REMARKS
Internal / GIA
1. Piloting of 12HP Single Cylinder
DA - PHilMech
Diesel Engine For PCIEERD TP: Oct. 31
Fabricators’ Cluster
( PhP 25M )
2. Advanced Mechatronics, Robotics
and Industrial Automation Laboratory
MRSP For PCIEERD TP: Oct. 31
or AMERIAL
( PHP 56M )

3. Project BUHAWI: Development of


Automatic Pedestal for 50 Cal Phil Navy
For PCIEERD TP: Oct. 31
Machine Gun and 50 Cal Gatling MRSP
( PhP 29M )

4. Rapid and Advance Prototyping for


Product Innovation and Development
ITDI
through Additive Manufacturing or For PCIEERD GC: Nov. 08
8 Sectors
RAPPID-ADMATEC
( PHP 305M )
2018 Mid-Year Review & Planning Conference

Thank You
PD
2018 Mid-Year Review & Planning Conference Scorecard
INTERNAL PERSPECTIVE
Strategy 2.2 Enhance delivery of products and services
2.2.3 Strengthen the R&D value chain capability
- % of projects approved by TRC with complete documentation
100%
for technology transfer
Strategy 2.3 Strengthen capacity and capability building
2.3.1 Maintain and if necessary, upgrade and expand resources
(Sufficient capacity and capability on priority areas)
- % of machines in working condition 98%
- Availability of tools/accessories/supplies/materials 90%
- Availability of operators/technicians/engineers 90%
- % alignment of equipment acquisition versus requirement 100%
- % service capacity versus requirement 100%
NEW MOA
2018 Mid-Year Review & Planning Conference

CIAMT PROGRAM
1. OMNIFAB - Carbon fiber 3D printing; and later Metal 3D Printer
2. MYGROWTECH - additional 11 CIMATRON software licenses
3. TRUMPF - 3in1 Fiber laser & welding machine, metal 3D Printer
4. COMPUTRENDS - additional 11 Solidworks licenses

Note: Items 2 and 3 with international partners.


CASH PROGRAM
2018 Mid-Year Review & Planning Conference UTILIZATION

1. MWS2 Phase 3
2. MWS2 Phase 4
3. Crane

You might also like