You are on page 1of 57

Engineering Drawing

ME-1022

Lecture #: 01
Introduction

Page 1 of 37
Course Outline
Part-I
1. Introduction: Types of lines, lettering, dimensioning, use of pencil and drawing
instruments, planning of drawing sheet.
2. Use of instruments and letter writing practice
3. Engineering Geometry: Geometrical construction engineering drawing practice
4. Projections: Types of projections, orthographic projections, plane of projections,
four quadrants, Sections of engine
5. First angle and third angle projection engineering drawing practice.
Part - II
Introduction to computer aided engineering drawing and use of software/package
(AUTOCAD).
2 D & 3 D drawing including solid modeling

Page 2 of 37
Text Book and Other Resources

Text Book:

Engineering Drawing by N.D Bhatt


Engineering Drawing by AC Parkinson.

AutoCAD 2016: A Problem-Solving Approach by


Sham Tickoo
Page 3 of 37
Grading Policy (Subject to Change)

• Lab Activity & = 30%


Assignments
• Semester Project =10%
• Mid Exam = 20%
• Final Exam = 40%

Page 4 of 37
LECTURE OBJECTIVES (Week 1)

• Graphics Language
• Engineering Drawing Definition and Function
• Line Types
• Traditional Drawing Tools
• Drawing standards
• Paper Size
• Letters and Numbers
• Drawing Title Box
GRAPHICS
LANGUAGE

Faculty of Mechanical Engineering


Ghulam Ishaq Khan Institute of Engineering Sciences & Technology
Effectiveness of Graphics Language
1. Try to write a description of
this object.

2. Test your written description


by having someone attempt
to make a sketch from your
description.

You can easily understand that …


The word languages are inadequate for describing the
size, shape and features completely as well as
concisely.
Composition of Graphic Language
Graphic language in “engineering application” use
lines to represent the surfaces, edges and contours
of objects.

The language is known as “drawing” .


Engineering Drawing

Language
communicates an idea or design
use Lines to represent the surfaces,
edges and contours of objects.
Surface

Edge
Engineering Drawing Applications(Importance)
- Mechanical Engineering
.Detailed drawing of a part that needs to be
machined.
- Electrical Engineering
. A circuit schematic.
- Civil Engineering
. Plans for a bridge.
Drawing
Drawing Types:
A drawing can be done using freehand, instruments or
computer methods.

A drawing serves as a graphic model or representation of real


object or idea.

Page 12 of 37
Freehand drawing
The lines are sketched without using instruments other
than pencils and erasers.

Example
Instrument drawing
Instruments are used to draw straight lines, circles, and
curves concisely and accurately. Thus, the drawings are
usually made to scale.

Example
Computer drawing
The drawings are usually made by commercial software such
as AutoCAD, solid works etc.

Examples
Typical Engineering Design Cycle
Problem
Identification

Preliminary
Ideas

Design
Refinement

Analysis

Optimization

Documentation
Page 16 of 37
Simple CAD/CAE/CAM Product Lifecycle

Design Analysis C Manufacturing


CAD CAE CAM

Faculty of Mechanical Engineering


Ghulam Ishaq Khan Institute of Engineering Sciences & Technology
Engineering
Drawing

Faculty of Mechanical Engineering


Ghulam Ishaq Khan Institute of Engineering Sciences & Technology
Elements of Engineering Drawing
Engineering drawing are made up of graphics language
and word language.

Graphics
language
Describe a shape
(mainly).

Word
language
Describe size, location and
specification of the object.
Basic Knowledge for Drafting

Graphics Word
language language

Line Projection Geometric


types method construction Lettering
Line Types and Styles
Common Line Types
Visible Lines: Represent the outline of the object. Continuous
thick lines.

Hidden Lines: Used to show the hidden part of the drawings.

2mm 1mm
Center Lines: Used to indicate the axes of cylinder, cone etc.

Phantom Lines: Used to indicate an alternate position of a


moving component.

Page 22 of 37
Common Line Types (Contd…)
Cutting Plane Lines: Used to show the edges of a
cutting plane.

Dimension Lines: Thin continuous lines. Terminate


with an arrow head.

Dimensions (mm or inch)

Extension Lines: Are continuous lines used in


dimension lines. A gap of about should be maintain
these lines and the visible lines of an object.
Page 23 of 37
Line Types an Example

1. Visible
2. Hidden
3. Center
Basic Sketching Line Types

0.7mm Visible Object – Thick


HB Visible Edges and Outlines

2-8mm
Hidden – Thin
1mm 0.3mm Hidden detail for like wall
2H thickness and holes..
3 mm

Center - Thin
15-20mm 3mm centre of a circle, cylindrical
0.3mm
2H features, or a line of symmetry.
1mm
15 mm
Line Types and Styles
Dimension
Visible Line
and Extension
Line

Hidden Line Cutting Plane


Line

Center Line
Section
Line
Phantom
Line Break Line
Line Types and Styles
Line Types and Styles
Line Types and Styles
Line Types and Styles
Line Types and Styles
Line Types and Styles
Dimension lines

Phantom lines Path lines Center lines


Visible lines
Dimension lines Center lines

Section lines

Hidden
lines

Break lines
Sketching Techniques

Page 33 of 37
Traditional
Drawing Tools
Faculty of Mechanical Engineering
Ghulam Ishaq Khan Institute of Engineering Sciences & Technology
Instruments
In order to create a manual engineering drawings
various instrument are used.

They are….

Page 35 of 37
Drawing Boards

Size:
1000(mm) x 1500(mm)

Page 36 of 37
Compass
• The compass is used to draw
circles and arcs of varying
diameters.

Page 37 of 37
Set Squares
• A set square or triangle is an object used in technical drawing,
with the aim of providing a straight edge at a particular point to a
baseline.
• The most simple form of set square is a triangular piece of
transparent plastic.
Drawing
perpendicular lines.

Drawing
parallel lines.

Page 38 of 37
T-Square
• T-Square is used for drawing parallel
horizontal lines and also as a base for set
squares, for drawing vertical, inclined or
mutually parallel lines.
• The stock of the T-square moves over the
working edge of the drawing board.
• The working edge of the blade should be Blade
perfectly straight.

Stock Drawing Edge

Page 39 of 37
Scales (Ruler)
• The international organization that
established the metric standard is
ISO. The system is called the
International System of Units.

• Mostly use millimeter scale


inch
• Conversion (Inch to mm)
• 1” (1 inch) = 25.4 mm

mm
Page 40 of 37
French Curves
• They are made mostly of plastic
and come in various shapes.
• French curves are used for
drawing curves which cannot be
drawn with a compass.
• The curves should be drawn with
a single stroke, so that no corners
are formed.
• They are used for drawing many
non-circular curves on graphic
charts and for plotting motion,
forces and engineering graphs.

Page 41 of 37
DRAWING TOOLS

1. Adhesive Tape 2. Compass


DRAWING TOOLS

3. Circle Template 4. Erasing Shield


Pencils
The following will be used in labs..
1 H 2 H HB

Page 44 of 37
DRAWING TOOLS
1. T-Square
2. Set Squares
3. Adhesive Tape
4. Pencils (1H, 2H, HB)
5. Compass (Mechanical)
7. Pencil Eraser
8. Erasing Shield
9. Circle Template
10. Sharpener
11. Protector
Drawing Sheet Sizes
Drawing Sheet Size Size in mm Size in inches
A0 1189 x 841 46.81 x 33.11
A1 841 x 591 33.11 x 23.39
A2 594 x 420 23.39 x 16.55
A3 420 x 297 16.55 x 11.69
A4 297 x 210 11.69 x 8.27
A5 210 x 148 8.27 x 5.84
A6 148 x 105 5.84 x 4.13

Page 46 of 37
Engineering Drawing Rules

Always use a sharp edge pencil.

Make all lettering the same size.

Use engineering paper (A3, A2, A1 etc)

Page 47 of 37
ABCDEFGHIJKLMNOPQRSTU
VWXYZABCDEFGHIJKLMNO
PQRSTUVWXYZABCDEF
Lettering
ABCDEFGHIJKLMNOPQRSTU
VWXYZABCDEFGHIJKLMNO
PQRSTUVWXYZABCDEF
Text on Drawings
Text on engineering drawing is used :

To communicate monographic information.


As a substitute for graphic information, in those instance
where text can communicate the needed information more
clearly and quickly.

Thus, it must be written with


Legibility - shape
- space between letters and words

Uniformity - size
- line thickness
Basic Strokes

Straight Slanted Horizontal Curved

Examples : Application of basic stroke


4 5
“I” letter 1 “A” letter 1 2 “B” letter 1

3 6

3
2
Suggested Strokes Sequence
Upper-case letters & Numerals
Straight line
letters

Curved line
letters

Curved line
letters &
Numerals
Example : Good and Poor Lettering

GOOD

Not uniform in style.

Not uniform in height.

Not uniformly vertical or inclined.

Not uniform in thickness of stroke.

Area between letters not uniform.

Area between words not uniform.


Sentence Composition
Leave the suitable space between words with respect to the
letters height.

Example

ALL DIMENSIONS ARE IN


MILLIMETERS UNLESS
OTHERWISE SPECIFIED.
Title Block Drawing
Title Box

Name: ABC 8

Reg #: 2009XXX 8

Title : ………………… 8

Date : 19 JAN 2009 8

100

Note: All dimensions are in mm.


Page 55 of 37
Assignment #1: Lettering Good Old Fashioned Way:
Guidelines:
• Note the letters width to height
ratio is 3/4 (like the "B") to 1 (like
the "A" or the "O"). In some cases,
like the "W", the ratio is actually
greater than 1.

• Also note, the letters are drawn on


horizontal guide lines. The guide
lines used for the figure were
originally 3/16" (the height of the
letters) with 1/16" of space
between each line.

• Spacing between letters should


be consistent and not too tight.
Submit this in your respective labs
next week.
Page 56 of 37
Thank you…

Page 57 of 37

You might also like