V-texTM case study | Pharmaceuticals GlaxoSmithKline Removal of Acetic Acid vapour from 1000 ppm to below limit of detection Gas flow range 50 to 1000Nm3/hr
Maintenance free operation since
installation in 1997
ERG (Air Pollution Control) Ltd www.ergapc.co.uk
V-texTM case study | Optical Fibres Optical Fibre Manufacturer in Denmark Removal of HCl and SiO2
Five 2 stages units
Scrub liquor contained up to 5% weight
SiO2 with no blockage
ERG (Air Pollution Control) Ltd www.ergapc.co.uk
V-texTM case study | Petrochemicals Major petrochemical refinery in USA Removal of chlorine 100 ppm, HCl 1500 ppm and SO2 500 ppm in a gasflow of 1000 Nm3/hr Temperature of gas 485°C
1 % sodium hydroxide scrub liquor
Removal efficiency 99.9%
ERG (Air Pollution Control) Ltd www.ergapc.co.uk
V-texTM case study | Chemicals Schering Plough Stainless steel unit, designed for 200oC and FV to 16 barg to BS5500 Gas flows ranging from 200 to 3600 Nm³/hr. System to start up and achieve full scrubbing efficiency in extremely short time, to cover unexpected bypass requirements
ERG (Air Pollution Control) Ltd www.ergapc.co.uk
V-texTM case study | Renewable Energy Stainless steel unit designed for 200°C and 3 barg Gas flow of 13000 to 17000 Nm3/hr Removal of ammonia with an efficiency exceeding 99.5% Removal of HCl to less than 1 ppm By-product of 12%wt ammonium sulphate
ERG (Air Pollution Control) Ltd www.ergapc.co.uk
V-texTM case study | Pharmaceuticals Novartis HCl scrubbing