You are on page 1of 2

Wireless AP Installation Plan in turbine hall

AP For Site Office

701
P 703
P 4F

3F

P 704 P 702 2F

1F

LAN Cable ・Set two AP/Floor “2F and 4F” or “1F and 3F”.
・If there are no obstacles, LAN cable is unnecessary.
Wireless : 5Ghz for Mesh Network We will setup a network using 5 GHz radio.
between AP and AP ・If we put a lot of APs, we are worried about radio interference.
We can use only 3 chanels in 2.4Ghz.
Wireless : 2.4Ghz for Client PC, Mobile ex. 701:Channel1, 702:Channel6, 703:Channel11, 704:Channel1

P Power Supply
Proprietary and Confidential Information. This document or information cannot be reproduced, transmitted, or disclosed without prior written consent of Mitsubishi Hitachi Power Systems,Ltd.

© 2017 Mitsubishi Hitachi Power Systems, Ltd. All Rights Reserved. 1


Radiation Pattern of CISCO Wireless Antenna

Proprietary and Confidential Information. This document or information cannot be reproduced, transmitted, or disclosed without prior written consent of Mitsubishi Hitachi Power Systems,Ltd.

© 2017 Mitsubishi Hitachi Power Systems, Ltd. All Rights Reserved. 2

You might also like