Professional Documents
Culture Documents
?
To efficiently run Textile mill in Lean mode
Improve the individual efficiency of machine, say frame to frame.
find the optimum speed of ring frames at this half load quota.
Energy Intake by Textile Mill
Energy Losses (Between the Cup & Lip in industry)
Input
Current KVA PF
Voltage
400 7.5A 5.2 0.8
The mill sees the visible loss only in few tube lights
watts loss etc in unwanted areas at daylight times.
Motor gets hotter without cooling fan & poor ventilation.
Raw Cogged Edged Belt reduces transmission loss from motor
to load by 3 to 5 % compared to Vee Belt.
Power Factor Correction on your 50HP Motor and this
is how your capacitor is checked not only by its input
current but by its output to increase PF & decrease
KVA at load. Check your Capacitors.
Voltage Regulation
MAINTENANCE FREE
EARTHING : EARTHING
IS GOOD IN THE LONG
RUN and well maintained.
Please Be Aware that your
Compressor produces Milk
too!
If the Compressor is not
healthy and overloaded and
poorly maintained,
.
ENERGY CONSERVATION IS IN YOUR HANDS
There are two kinds of employees in your industry.
They sit around & wait for bus to take them somewhere slowly.
Now please Decide where & how fast you can save our energy
Humidification effect on mill
Less water, more air yields more humidity to mill
.
Removal of Barriers
Technical barrier to start with:-
the mill is healthy and to catalyze the mill to go how fast &
, ,
CONSERVE ENERGY & SERVE NATION
www.energymanagertraining.com
Please go through the Govt. Website
and you will find mine & more articles on Industry
Thank You S.ASHOK / COIMBATORE
PCRA FACULTY,
cell : - 9 4 4 3 7 - 2 0 2 2 0
ID :- ashok.anbesivam@gmail.com