Professional Documents
Culture Documents
HOLDINGS
SDN BHD
(Reg. 49537-M)
CEO
HR/ADMIN
WORKSHOP
MIXING AND
BIOGAS & R.E
AGITATION
SLUDGE
UV
TRANSFER &
DISINFECTION
DEWATERING
ENVIRONS
PRODUCT
AREA
ENZYME &
PUMPING
MICROBES
BIOMASS
FILTERING
TECHNOLOGIES
TASKS ASSIGNED
To read up on sewage wastewater treatment activity. To list out what type of treatment is involved and type of
Task 1 equipment normally used for the treatment.
To identify type of aerator that are available in the market and the difference.
Task 2 To differentiate between Aqua-Jet surface aerator and DDM Mixer.
Aeration
Bar Rack Primary Tank UV
Grit Clarifier Secondary Disinfection
Chamber Clarifier
ENVIRONS PRODUCT RANGE
Aqua Jet Surface Aerator VS Aqua
DDM
Aqua Jet Surface Aerator Aqua DDM (Direct Drive Mixer)
Aqua Jet Surface Aerator has upward Aqua DDM (Direct Drive Mixer) has
mixing pattern downward mixing pattern
ADVANTAGES
Aqua Jet Surface Aerator Aqua DDM (Direct Drive Mixer)
Proven oxygen and mixing performance. Simple physical construction makes
Easy and flexible installation. handling easy.
Short lead times. Lower initial cost and less expensive to
Easily added to existing plants. install.
Equipment easily retrievable. Better and more reliable service.
High efficiency motor One-piece stainless steel shaft.
Accessories available Suitable for most basin configurations.
Anti-erosion plate available for use in
earthen basin
PERISTALTIC PUMP
The actual pumping principle called
peristalsis, based on alternating compression
and relaxation of the hose or tube, drawing
content in and propelling product away from
the pump.
A rotor is used to squeeze a leak-proof tube
or hose, thereby forcing the pumped fluid
through the hose.
As the pumps rotor turns this sealing
pressure moves along the tube or hose
forcing product to move away from the pump
and into the discharge line.
One of the Verderflex Peristaltic Pump Combination of the suction and discharge
principles produce a powerful self-priming
positive displacement action.
PERISTALTIC PUMP ADVANTAGES
Abrasion resistant
No moving parts in the liquid stream
Accurate Dosing
Self-priming
Can pump liquids containing up to 80% inorganic solids (fines)
Aseptic pumping smooth liquid passage
Easy & completely cleanable without disassembly
Suitable for handling shear sensitive products
Can run dry
Low cost of ownership
High suction capability of up to 95% vacuum or a 9.5 mWc
No seals
Reversible rotation, empties line or blockages
Can pump abrasive, very viscous or high density liquid
TURBO BLOWER
High speed centrifugal blower
integral with a Permanent Magnet
Synchronized Motor (pmsm),
driven through an inverter.
The energy is transfer from a
rotating shaft to air or gas.
A pressure rise is achieved by
adding kinetic energy to a
continuous flow of air through the
The new installed Turbo Blower at WWTP
rotor or impeller.
TURBO BLOWER COMPONENTS
1) User Interface Unit
2) Driving or Inverter
System
3) Control Panel
4)BOV (Blower Off Valve)
5) Suction Filter System
6)Permanent Magnet (PM)
Motor
7) Performance Test System
ADVANTAGES OF TURBO BLOWER
Easy to install
Oil less system
High energy efficiency, up 30% savings
Low sound pressure levels
Variable flow rate control in the working area
Less vibration and less noise design
High speed permanent magnet motor
Minimal maintenance needs
Compact in size
APPLICATION AREA OF TURBO
BLOWER
Wastewater Treatment Plant
Pressed Transportation for raw materials
Cement Production Process
Thermal Power Generation
Water Treatment Process
Food and Chemical Treatment Processes
Chemical and Petrochemical Processes
Metal Processing and Mining
SITE VISIT: INSTALLATION, TESTING &
COMMISSIONING THE NEW TURBO
BLOWER