Professional Documents
Culture Documents
(PLCC)
Submitted By:
Er. Vishwesh Kumar Sharma
PLCC Technology
PLCC system uses the same High Voltage transmission line connecting
two sub-stations for telecommunication purpose too.
PAX
RTU
PLCC TERMINAL
Transmission line
(ABB-ETL41)
Coupling Scheme
The PLC
signal is
not
Coaxial
absorbed
by the
Local substation substation
PLC terminal
Components
PLCC Terminal = Translates Voice and data into High Frequency Carrier. Output
Power =10 to 80W
LMU = Line Matching Unit = For impedance matching between line and coaxial
cable, includes high voltage protection devices like drainage coil(20mH), lightening
arrestor(500V) and an earth switch.
Coupling Capacitor (C.C) = Couples high frequency carrier with Power Line (
4000 to10000pF)
Line Trap (L.T) = Do not allow the transmitted HF carrier to enter inside the sub-
station. (L = 0.5 to 2mH) With out Line trap HF carrier get by- passed to some
other line on the same bus bar and may leak to ground ( a earth switch inside the
yard provided for each bay is kept closed during maintenance)
Line Trap function = PLC signal Blocking
Power energy
PLC Signal
Substation
Inductance
of
main Coil
Lightning Series
Arrester resistance
Tuning
Capacitor
Line Traps Mounting Options
Matching + Protection
LMU
PLCC Panel ( type: ABB ETL 41/42)
Cabinet Module
ABB PLCC terminal ETL- 41
System data -- complies to IEC 495
Operating mode : Single side band Suppressed carrier
LT
LT
cc cc
C
FAX
ETL ETL
FAX
M M