Professional Documents
Culture Documents
Techniques
Using Engineered Timber
The
CONTENTS: Introduction
Supply of Wood
Trees & wood
Manufacturing process
Product range
Design
Engineering limits(Wood properties)
Prefabrication
Embodied CO2
SUPERIOR Fire RESISTANCE
Connections
Wood modification
Inspiration
Conclusions
References
Introduction
Why to used Timber ?
High Strength
Greater Durability
Low maintenance
Fire resistive
Low Cost Material
Timber construction is quick
Versatile
Timber construction- environmentally sensitive
Supply of wood
Trees and wood
Approximately 20% of worlds land surface covered by trees.
97% of all softwood used in Europe comes from European
forests.
30% increase in wooded area in Europe between
Years 1990-2000.
Trees are on average 60-80 years old on harvest.
Primary softwoods used for construction are
Spruce (whitewood) and pine (redwood).
Forest distribution
Manufacturing Process
Product range
Engineered timber
Engineered timber
Glulam
Spruce grades GL24 to GL36
Lamella thickness of type 40mm
Stock sizes up to 20cm x 65cm x
13.5m
Other sizes up to 28cm x 2.2m x
36m
Glues are melamine resin based.
Laminated Veneer Lumber (LVL)
Jumbo plywood made from 3mm thick
veneers.
Finn Forest Kerto (S & Q)
Different lay ups produce boards or
beams
Thickness up to 75mm
Panel sizes 2.5m x 20m+
Engineered timber
Brettstapel
Solid timber panels
Glued, nailed, screwed or dowelled
Thickness up to 260mm
Lengths up to 18m
Widths up to 1.2m
Floor and roof spans up to 10m+
Design
Engineering limits(Wood properties)
Timber is anisotropic
5 to 10x weaker across the grain
(similar to bundle of straws)
Affected by moisture
50% moisture content natural state,
12- 20% in use (hygroscopic)
20-40%loss in strength in damp
conditions
Strength
Defect free -100N/mm2
Typical wood-16-24N/mm2
Softwoods used in UK are
designed using 6N/mm2
Embodied CO2
Prefabrication
Walls/floors
Slab/walls
Platform construction
Fig. Lintels in an open & closed panel timber frame wall panel
CONSTRUCTION APPROACHES
Buildings constructed with large structural timbers have excellent fire
-resistive qualities.
U.S. model building codes recognize these qualities and provide two distinct
approaches : Heavy Timber Construction and Fire Resistive Construction
Connections
Connection design critical in timber structures.
Typically connections determine the section sizes in multiple element
structures.
Recent years have seen major advances in fixing technology .
Glued connections strongest and stiffest.
Connections with multiple Small fixings (ie nails or screws) are also
efficient
Wood modification
Improve properties of wood
through chemical and thermal
modification
Potential to improve durability,
dimensional stability and strength
properties
Existing examples include
Accoya
acetylated wood and Thermowood
Cambridge University is Working
on the structural and architectural
use of polymerised wood
Inspiration
Name :Tamedia office building
Zurich, switzerland
Storeys:7(including mezzanine
gallery)
Workplaces: 480
Floor area of the new building:
8,905 m2
Cubic volume of new building:
39,085 m3
Wood used in construction:
2,000 m3 of spruce (Styria)
Architect:Shigeru Ban Architect
Europe, Paris
CONCULSIONS
In modern day construction, we can construct fire
resistive, light weight & lifelong structures with the help of
Engineered timber.
Timber gives good strength as similar steel & concrete
structures.
Timber material gives good appearance & natural feeling
to the structures.
To used similar advanced timber techniques in India.
References