Professional Documents
Culture Documents
K.V.SUBBA RAO
Shotcreting
Shotcreting
Shotcreting
Shotcreting is used in building thin-walled reinforcedconcrete structural components, such as shells, vaults,
and tanks, and in producing the lining in tunnels. It is
also used for hydraulic insulation, for finishing the joints
of reinforced-concrete structural components, and for
repair and strengthening of concrete and reinforcedconcrete components.
Shotcreting
Shotcreting
Shotcreting has high strength properties; resistance of its
extension is 10 per cent more in comparison with
standard concrete. The cover of high strength, density
and waterproofing capacity is formed because of impact
laying
Shotcrete application allows decreasing face thickness
and out-turns; excluding the necessity of formwork and
mechanizing the concrete work process totally.
Cement
Sand
Coarse Aggregates
Water
Chemical additives
Compressed Air
Preparation of Surface
Preparation of Surface
Mix of shotcrete
Cement
Sand
Coarse aggregate
(5 mm 10 mm size)
Proportion by weight
450 kg / m3
1100 kg / m3 (0.70 m3)
500 Kg/M3 (0.30 M3)
1:2.44:1.11
Application Methodology
Precautions to be taken
Precautions to be taken
After completing the shotcrete and after the mix is set,
the surface should be thoroughly sounded by a hammer
for drumming areas resulting from rebound pockets or
lack of bond etc., which should be cut out and replaced
with fresh shotcrete.
Where dry process is adopted the jetting of water should
be synchronized with that of the concrete mix for a
homogeneous shotcrete.
Where wet mix is adopted the specified water cement
ratio is to be strictly enforced.
Shotcreting
Shotcreting
Shotcreting
Shotcreting
Shotcreting
Shotcreting
NSRC
Thank You