Professional Documents
Culture Documents
cturer
Introduction
A PCB populated
with the electronic
components and is a printed
circuit assembly(PCA),also
known as a printed circuit
board assembly(PCBA).
1) Film Generation
2) Select Raw Material
3) Drill Holes
4) Electroless Copper
5) Apply Photo-resist and Image
6) Pattern Plate
7) Strip & Etch
8)Soldermask
9)Nomenclature(silkscreen)
10)Surface Finish Applied
11)Fabrication
1) Film Generation
2) Select Raw
Material
3)Drill
Holes
1)Film Generation
Films for all of the copper and soldermask layers are made from
photographically exposed mylar.
2)Select Raw Material
Industry standard 0.059" thick FR-4 laminate copper clad on two sides.
3)Drill Holes
Through holes required are created from your submitted files for your PCB
design, using NC drill machines and carbide drill bits.
4)Electroless Copper
In order for the through holes to electrically connect to the different layers of
the PCB,a thin layer of copper is a chemically deposited into the through holes. This
copper will later be thickened through electrolytic copper plating.
5)Apply Photo-resist and Image
To transfer the PCB design from the electronic CAD data to the physical
circuit board.
6)Pattern Plate
This step is an electrochemical process which builds copper thickness
into the holes and onto the surface of the PCB.
4) Electroless Copper
6) Pattern
Plate
7) Strip & Etch
8)Soldermask
9)Nomenclature(silkscreen)
10)Surface Finish Applied
11)Fabricati
on
TRIODE GROUP
LIMITED purchases
the business products
of Precision
Manufacturing
Solutions Ltd
Thank
YOU