Professional Documents
Culture Documents
(Malay: Menara Petronas, or Menara Berkembar Petronas), are twin skyscrapers in Kuala Lumpur, Malaysia.
Petronas
Towers
Petronas Towers
Menara Berkembar Petronas
Introduction
The 88-floor towers are constructed largely of reinforced concrete, with a steel and glass
facade designed to resemble motifs found inIslamic art, a reflection of
Malaysia'sMuslimreligion.
The Petronas Towers feature a diamond-faceted facade consisting of 83,500 square meters
(899,000sq.ft.) of stainless steel extrusions.
In addition, a 33,000-panel curtain wall cladding system resides within the towers.
the stainless steel element of the towers entices the illustrious sun, highlighting the
magnificent towers, they are composed of 55,000 square metres (590,000sqft) of 20.38millimetre (0.802in) laminated glass to reduce heat by reflecting harmful UV rays.
The towers feature a double deckerskybridgeconnecting the two towers on the 41st and
42nd floors.
The bridge is 170m (558ft) above the ground and 58m (190ft.) long, weighing 750 tons.
The main bank ofOtisLiftsis located in the center of each tower.
All main lifts aredouble-deckerwith the lower deck of the lift taking passengers to evennumbered floors and upper deck to odd-numbered floors.
To reach an odd-numbered floor from ground level, passengers must take anescalatorto
the upper deck of the lift.
On the top of each tower is a pinnacle standing 73.5 metres (241ft) tall.
Each pinnacle is composed of 50 unique parts making up the main components: the spire,
mast ball and ring ball.
Together these parts weigh 176 tons.
The interiors of the towers highlight the Malaysian cultural inspiration to the design
through traditional aspects such as fabric and carvings typical of the culture, specifically
evident in the foyer of the entrance halls in the towers.
A tall building requires an efficient vertical transportation system typically comprising passenger lifts,
service lifts and fireman lifts.
The number of passenger lifts is generally determined by the population of the building, type of building
occupancy, population during peak period, number of floors and heights, and building location in relation to
public transport services.
More specifically it depends on the quality of service, round-trip time, flow rate, interval for lifts, lift travel
and lift speeds.
Generally when the building becomes taller, additional lifts are required to accommodate the additional
population.
The lift arrangement has a major impact on the size and internal layout of the service core which, in turn,
affects the net rentable floor area.
Therefore an economic design should aim at striking a proper balance between the passenger handling
capability and rentable floor space.
For a tall building, the vertical transportation system is usually based on the multi-zone system in which
the building is divided into a number of lift zones such as low, mid and high zones.
Prospective passengers take lifts at the main lift lobby to reach a destination floor.
However, for a super tall building, the size of the service core becomes excessively large.
In order to keep the service core within a reasonable size while maintaining an acceptable level of
response time, the sky-lobby system may be adopted as a solution.
Passengers take shuttle lifts to the sky-lobby and then transfer to other lifts to higher floors.
CORE
Each tower has one central core for all lifts, tower exit stairs
and mechanical services.
Satellite bustle stairs have non-structural walls, since they
would be less effective cores (see Figure 3).
For the PETRONAS Twin Towers, two virtually solid walls
running North-South, and one running East-West, provide
`Webs', for the core `cantilever beam', making the core quite
stiff and efficient.
As a result, it carries slightly more than half the wind
overturning moment at the foundation.
To resist wind the core has thick, heavily reinforced corners
(see Figure 4).
The overall core varies from about 23 m (75 ft) square to
19622 m (62673 ft) in four steps, with outer walls varying
from 750 mm (30 in.) to 350 mm (14 in.) and inner walls a
constant 350 mm (14 in.) to avoid complications with lift
shafts and the self-climbing forming systems.
Above level 70, corners of the core drop back to avoid
`pinching' office circulation against the perimeter columns.
Concrete grade varies in three steps from 80 to 40 Mpa,
matching tower column grades (see Figure 5).
Central Core
Central core in each tower, accommodate
lifts, exit stairs, mechanical services
Two solid walls running n-s and e-w- web
cantilever beams projecting-makes it stiff
takes more than half the twisting moment.
Highly reinforced thick corner wallsresist wind.
Core varies from 22 sq m to 19 x 22 m in
four steps
Outer walls 750 to 350 mm
Inner walls constant 350 mm- to avoid
complication with lift shaft
concrete grade drops from 80 -40 mpa as
it accents
SKYBRIDGE
A double-deck bridge spanning 58.4m (190 ft.) connects the two towers at the sky lobby
elevator transfer stations on floors 41 and 42, 170 m (558 ft.) above grade, for easy
circulation between upper tower floors with a minimum of lift transfer and possible
crossover exiting through the other tower, reducing the required size of exit stairs below
(see Figure 8).
Because of the great height and span, structural steel was used for lightweight and
easier construction.
Although single-span trusses could have been used, a two-hinged arch and continuous
floor girders offered a shallow walkway structure, minimized expansion joint movement
(joints move at both towers), self-centering action from restraint at the arch crown and a
strong visual identity.
The skybridge design considered the effect of complex tower movements on joints and
members, including vertical midspan movements due to tower deflections, the
aerodynamic response of the 1.1m (3.6 ft.) diameter pipe legs, fatigue, the response to
sudden loss of support, creep and shrinkage movement and compensation, and bridge
facade panel movements.
Lift system
The main bank of Otis Lifts is located in the center of each tower.
All main lifts are double-decker with the lower deck of the lift taking passengers to even-numbered floors
and upper deck to odd-numbered floors.
To reach an odd-numbered floor from ground level, passengers must take an escalator to the upper deck
of the lift.
There are 29 double-deck passenger elevators, but there are different sets that service certain floors of
the towers, specifically two sets of six of these double-deck passenger elevators to floors 123 and 137
respectively.
Another set of 5 passenger lifts transport passengers to the 41st and 42nd floors where they can switch
lifts to reach the upper zones of the buildings, each double-deck passenger lift with the capacity of 52
passengers or, 26 passengers per deck. There are also 6 heavy-duty elevators for utility.
From the ground floor, there are three groups of lifts. The "short haul" group of 6 lifts take passengers to
floors between level 2/3 and level 16/17.
The "mid haul" group of six lifts take passengers to floors between level 18/19 and level 37/38. There is
also a set of shuttle lifts that take passengers directly to levels 41/42.
To get to levels above 41/42, passengers must take the shuttle lifts, then change to lifts to the upper
floors. These connecting lifts are directly above the lifts that serve levels 2 to 38.
The pattern now repeats with the upper levels, one set serving levels 43/44 to 57/58 and one set serving
levels 59/60 to levels 73/74.[41]
Apart from this main bank of lifts, there are a series of "connecting" lifts to take people between the
groups. Unlike the main lifts, these are not the double-decker type.
Two lifts are provided to take people from levels 37/38 to levels 41/42 (levels 39 and 40 are not accessible
as office space).
This spares someone in the lower half of the building from having to go back to the ground floor to go to
the upper half of the building.
The lifts contain a number of safety features. It is possible to evacuate people from a lift stuck between
floors by manually driving one of the adjacent lifts next to it and opening a panel in the wall.
It is then possible for people in the stuck lift to walk between lift cars.
During an evacuation of the buildings, only the shuttle lift is allowed to be used, as there are only doors at
levels G/1 and levels 41/42; therefore should there be a fire in the lower half of the building, this enclosed
shaft would remain unaffected. Firefighter lifts are also provided in case of emergency.
Many tall buildings are divided into several zones: low zone, mid zone, high zone, etc.
with service direct from the main terminal floor, situated at ground level. These are
called `local zones.
This becomes impractical with very tall buildings and shuttle lifts are employed to take
passengers from the ground level main lobby to a `sky lobby'.
This could be 200 m (Petronas Towers, Kuala Lumpur, Malaysia).
Passengers disembark at the sky lobby and service is then provided to further low, mid,
high zones, etc. using the sky lobby as an upper main terminal floor.
The advantage is that the core efficiency is improved, as the hoist ways extend the
whole height of the building (except for the intervening equipment spaces) and occupy
the same hoist way `footprint'.
Shuttle lifts are usually quite large and fast and provide an excellent service to the sky
lobby.
Their main disadvantage is that the passengers must change lifts mid journey, hence
increasing their total journey time.
When a traffic design involves a change of lift, the two journey times are best quoted
separately.
Sometimes passengers travel down from the sky lobby as well as up (Fortune, 1986).
Most shuttle lifts are single deck, but there are a number of double deck installations.
Generally shuttle lifts serve between two stops only, hence the term `shuttle', but
sometimes
they serve three stops, ie: with two sky lobbies (Sears Tower, USA).
The number of shuttle lifts that are installed world wide is not large. Their traffic design
is
relatively simple, but their application in a building requires expert consideration.
Double deck lifts comprise two passenger cars one above the other connected to one
suspension/drive system.
The upper and lower decks can thus serve two adjacent floors simultaneously.
During peak periods the decks are arranged to serve `even' and `odd' floors
respectively with passengers guided into the appropriate deck for their destination.
Special arrangements are made at the lobby for passengers to walk up/down a half
flight of stairs/escalators to reach the lower or upper main lobby.
Double deck lifts, which are common in the USA and elsewhere, but unusual in Europe,
are used in very tall buildings.
Fortune (1996) indicated 465 double deck lifts in 34 buildings across the world (see
Table 1).
There are many advantages and disadvantages to double deck operation and special
care has to be taken with the lobby arrangements. One advantage for double deck lifts
is that the `hoist way' handling capacity is improved, as effectively there are two lifts in
each shaft.
A disadvantage for passengers during off peak periods is when one deck may stop for a
call with no coincident landing, or car call, required in the other deck. Special traffic
control systems, available during off peak periods, attempt to overcome this problem.
Transfer Floors
Most tall and very tall buildings
provide some means to travel
between zones and stacks.
This is sometimes achieved by
overlapping zones (Petronas
Towers), introducing extra stops
(Sears Tower) or shuttle lifts (World
Trade Center).
A common served floor (other than
the Main Terminal or Sky Lobby) is
important, where there are common
facilities to be accessed, eg:
restaurant, travel bureau, banking,
sports facilities, post room,
reprographics, etc.
The effect on traffic handling can be
disruptive. In general it is important
to restrict access to such floors
during up peak and down peak,
although the purpose of such a
floor would be defeated at other
times, i.e.: at the mid day break or
during interfloor traffic.
Service Building
The Service Building is to the east of the Petronas Towers and contains
the chiller plant system and the cooling towers to keep the Petronas
Towers cool and comfortable.
Bibliography
1. http://www.petronastwintowers.com.my/
2. http://www.otis.com/_layouts/ProjectItemPopup.aspx?
productItemNo=7&siteURL=http://www.otis.com/site/cneng/Pages/GlobalProjectGallery.aspx?menuID=6
3. http://asia-in-my-eyes.blogspot.in/2012/03/petronas-twin-towers-klmalaysia.html
4. http://lifestyle.iloveindia.com/lounge/facts-about-petronas-towers-2975.html
5. http://www.kiat.net/towers/facts.html
6. http://civildigital.com/presentation-petronas-twin-towers-kuala-lumpurmalaysia/
7. http://pheiding.blogspot.in/2011_01_01_archive.html
8. http://en.wikipedia.org/wiki/Petronas_Towers
9. http://balderchan.blogspot.in/2011_01_01_archive.html
http://imgkid.com/petronas-towers-plan.shtml
10.www.liftdirectory.com
11.http://www.brugglifting.com/elevator-ropes/index.php/en/downloads.html
12.http://www.themechwarrior.com/petronas-twin-towers-2/
13.http://www.rambleandwander.com/2014/08/malaysia-petronas-twin-towerstour.html
Thanking You
Presented By Deepika Dhilip Reg No:2014804005