Professional Documents
Culture Documents
2010
2009 ANSYS, Inc. All rights reserved.
11
Overview
A common need is to take the Output from analysis
A and map that data as Input to analysis B.
This ability has been present in WB since V12(1 way
FSI) but has been greatly enhanced in V13:
Introduction of a new External Data system to import
loads from 3rd party applications
Thermal-Stress Analysis inside Mechanical using
different models(meshes)
Schematic support for 1-way Load transfer between
Mechanical and Electronic systems(HFSS/Maxwell)
Volumetric temperature transfer between CFD and
Mechanical
2009 ANSYS, Inc. All rights reserved.
External Data
System
2010
2009 ANSYS, Inc. All rights reserved.
33
Preview Pane
Format
Specifier
Units
Mapped
Data is
displayed
Imported Load
Folder created
Option such as
scoping and
mapping controls
Support for
scale, offset,
multiple load
steps via
worksheet
If source data is
2D, Projection
option is available
2009 ANSYS, Inc. All rights reserved.
10
11
12
Diagnostic Information
After mapping is completed, diagnostic information is created to give
details about the mapping
13
Thermal Stress
with Different
Models
2010
2009 ANSYS, Inc. All rights reserved.
14
14
15
16
Mapped Results:
No scoping
2009 ANSYS, Inc. All rights reserved.
17
Thermal-Stress Diagnostics
18
Other mapping
Extensions
HFSS/Maxwell to Mechanical
Volumetric temperature for
CFD
2010
2009 ANSYS, Inc. All rights reserved.
19
19
Mechanical Maxwell/HFSS
From Maxwell/HFSS: Import Heat
Generation/Heat Flux to Mechanical
From Mechanical: Export Thermal
Results to Maxwell/HFSS
From Maxwell: Import Surface/Body
Force Densities to Mechanical
20
21
V14 Extensions
2010
2009 ANSYS, Inc. All rights reserved.
22
22
23
Appendix:
Example Screen
Shots for External
Data
2010
2009 ANSYS, Inc. All rights reserved.
24
24
2D Results
25
3D Face
3D Body
26
2D Bodies
2D Edge
27
1
Using Magnitude & Normal
Using X Y Z Components
28
Using X Y Z Components
29
30