Professional Documents
Culture Documents
OPCOM3500E
OPCOM3500E in C.O.
Typical Application
Slot 0:
Network
Management
Slot 1~5,8~12:
Slot 6,7:
Slot 9:
Power
Tributary
Aggregation
Tributary or GE
Aggregation
Supply
Features
Aggregate all kinds of Raisecom TDM and Ethernet CPE to SDH
Total 4 STM-1 ports or 2 STM-4 ports aggregation unit
No-block cross connection of 1616 VC4 or 10081008 VC12
VC12 cross connection between all tributary units and aggregation units
Chassis
OPCOM3500E-12DC/D
MSAP chassis
OPCOM3500E-STM1-M
1 uplink STM-1 optical interfaces
Aggregation board
OPCOM3500E-STM4-M
2 uplink STM-4 optical interfaces
Aggregation board
OPCOM3500E-SUB-ESW-2GE
2 Gigabit Ethernet combo interfaces
Aggregate all tributary boards FastEthernet uplinks
OPCOM3500E-NMS
Network management module of OPCOM3500E Platform
SNMP network
management
port
Console
port
of upper layer.
2) It can manage OPCOM3500E equipment, and
RS232
Users
channel
2M
clock
output
board.
OPCOM3500E-STM1-M
OPCOM3500E-16E1(-BL) E1 tributary
16 E1 electrical ports 75ohm or 120ohm
OPCOM3500E-30*8 PDH fiber tributary
8 E1 optical ports to connect remote E1(or V.35) fiber modems
OPCOM3500E-120*4, OPCOM3500E-120H*4 PDH fiber tributary
4 PDH fiber optical ports, each port includes 4 E1 traffics, to connect remote PDH
4E1 CPE.
OPCOM3500E-240*2 PDH fiber tributary
2 PDH fiber optical ports, each port includes 8 E1 traffics, to connect remote PDH
8E1 CPE.
OPCOM3500E-120EOS*4 PDH fiber tributary
4 RCMS PDH fiber optical ports, each port includes 4 E1 and 100Mbps FastEthernet traffics, to connect remote RCMS2811 PDH CPE. The Ethernet data could
be mapped to VC12 though EoS function.
OPCOM3500E-120FE*4-GE PDH fiber tributary
4 RCMS PDH fiber optical ports, each port includes 4 E1 and 100Mbps FastEthernet traffics, to connect remote RCMS2811 PDH CPE. The Ethernet data could
be aggregated to a GE port on front panel.
OPCOM3500E-STM1-S
OPCOM3500E-STM1-S Application
OPCOM3500E-30x8
30x8 Application
OPCOM3500E-120EOSx4
OPCOM3500E-120FEx4-GE
Tributary unit of RCMS PDH ports
4 Multi-service fiber optical ports, each port capability is 100Mbps
wire speed Fast-Ethernet and 4E1
OPCOM3500E-P240EOS
OPCOM3500E-P240FE
Tributary unit of RCMS PDH ports
1+1 protection line fiber
150Mbps bandwidth in fiber, 100M for Ethernet, 50M for 8
E1 links
& Management information
OPCOM3500E-EOS(E)-8FX
OPCOM3500E-EOS-8FE
Tributary unit of Ethernet ports
8 Ethernet interface over 8 VCG individually
EOS-8FX: 8 x 100Mbps Ethernet optical interface
EOSE-8FX: 8 x 100Mbps Ethernet optical interface (VLAN ID
configurable)
EOS-8FE: 8 x 10/100Mbps Ethernet interface
8 links Ethernet service have rate limiting function with N*VC12 step,
and they can share maximum 63 VC12
GFP and LAPS encapsulation, and it supports LCAS function
Remote Raisecom 100M Media Converter can be network managed
On-line software up-grade of local equipment
OPCOM3500E-8EOS-FX
OPCOM3500E-8EOS-FE
Tributary unit of Ethernet ports
Aggregate 1~8 VCG to single Fast-Ethernet aggregation
trunk
The Ethernet aggregation trunk port is on front panel or
connect to GE aggregation board through backboard
Optional fiber optical Ethernet interface or Electrical
Ethernet interface
GFP, LAPS available
VCAT, LCAS supportable
Maximum 8K MAC address, and 4096 VLAN ID
IEEE802.1q VLAN and Port VLAN, Q-in-Q double tag
4 output priority Queues
MTU up to 1632 bytes
8EOS-FX/FE application
OPCOM3500E-4EOS-4FE
Tributary unit of Ethernet ports
Multiple Application in EOS
Map 4 Fast-Ethernet port to 4 VCGs individually, similar
function as OPCOM3500E-EOS-4FE/8FE
Aggregate maximum 4 VCGs to one Fast-Ethernet,
similar function as OPCOM3500E-8EOS-FE
Map 4 Fast-Ethernet port to single VCG, VLAN tag
configurable
GFP, LAPS available
LCAS supportable
Maximum 8K MAC address, and 4096 VLAN ID
IEEE802.1q VLAN and Port VLAN, Q-in-Q double tag
4 output priority Queues
MTU up to 1632 bytes
4EOS-4FE Application
Multi VLAN over single VCG
OPCOM3500E-EOP-FXE1x8
OPCOM3500E-EOP-FEE1x8
Tributary unit of Ethernet ports
8 x 100M Ethernet interface service over single E1 (VC12)
EOP-FXE1x8 has 8 individual 100Mbps fiber optical Ethernet ports
EOP-FEE1x8 has 8 individual 10/100Mbps electrical Ethernet ports
Adopt SFP optical interface, plug and play
Each Ethernet link could be converted to one unframed of framing E1,
and could be rate limited with N*64Kbps DS0
EOP-FXE1x8 Application
OPCOM3500E-EOP-FE8E1
Tributary unit of Ethernet ports
Ethernet over 1~8 E1 Inverse Multiplexer inside
10/100Mbps electrical Ethernet port on front panel
8 E1 are mapped into VC12s to Aggregation Unit
Privately HDLC encapsulation with EoPDH Technology
On-line software up-grade of local equipment
EOP-FE8E1 Application
OPCOM3500E-EOPS-8E1
Tributary unit of Ethernet ports
Bridge the gap between EoPDH network and EoSDH network
8 E1 electrical port on front panel are used for connect to RC95x series
inverse multiplexer only
Convert E1 signals from front panel interface to Fast-Ethernet single by
EOP technology, and then convert the Fast-Ethernet signal to N*VC12
by EOS technology
GFP, LAPS available
LCAS, N-LCAS function
EOPS-8E1 Application
OPCOM3500E-16E1
OPCOM3500E-16E1 is E1 service unit of OPCOM3500,
it can provide 16 unbalanced E1 interfaces, and it
can be mapped in SDH frame through aggregate
unit of OPCOM3500
Provide complete alarm, performance monitor.
16E1 Application
OPCOM3500E
E1 links
STM-1/STM-4
2G BTS
Backup Ring
Thank you!