Professional Documents
Culture Documents
643
The use of pivoting bearings is usually associated with high weight materials, difficult installation, and high costs. Most of the time, maintenance is still necessary long term, and the bearings are only corrosion resistant in special designs. igubal pressfit spherical bearings put an end to all of these disadvantage: they are easy to fit, cost-effective, lightweight and robust.
Easy to fit
Extremely cost-effective
Chemical-resistant
When to use it? For high axial and radial loads When an easy installation is required In case of reduced installation place If chemical resistance is required If a cost-effective option is requested If you need dirt-resistant bearings To adjust misalignment If you need splitting components
Light weight
When not to use it? If temperatures are higher than +80 C If dimensions above 30 mm are necessary If rotation speeds higher than 0.5 m/s are required
High strength
Temperature
+80
30
644
More information
www.igus.co.uk/pressfit-sphericals
www.igus.co.uk/igubal-applications
www.igus.co.uk/food
www.igus.co.uk/traffic
www.igus.co.uk/automotive
www.igus.co.uk/hose-skiving
igus (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 645
The use of spherical bearings is usually associated with high weight materials, difficult installation, and high costs. Most of the time, maintenance is still necessary long term, and the bearings are only corrosion resistant in special designs. Often roller bearings or plain bearings malfunction prematurely due to high edge loads, or because they need to be readjusted, reamed, or refitted in order to compensate for alignment errors. igubal spherical bearings put an end to all of these disadvantages and open up many new possibilities for your engineering design. igubal pressfit spherical bearings are easy to fit igubal pressfit spherical bearings are cost-effective igubal pressfit spherical bearings are light weight igubal pressfit spherical bearings have a high strength
Installation
igubal spherical bearings are pressfitted into a recommended housing bore and axially secured. An exact orientation of the bearing housing is not necessary, since the spherical bearing compensates for alignment errors.
Area of application
Ease of installation makes diverse applications possible for igubal spherical bearings. They can be used anywhere. The self-aligning feature offers design advantages or helps to simplify assembly.
Dimensions
igubal spherical bearings are manufactured according to DIN ISO 12240 dimensional series K and E. The product range provides dimensions from 0.19 to 1.0 and 2 to 30 mm. Please contact us if you need other dimensions.
Pivot angle
www.igubal.co.uk
KGLM
Series K metric
KGLM LC
Series K metric
KGLM SL
Series K metric
KGLM H
Series K metric
KGLI
Series K inches
EGLM
Series E metric
page 648
page 649
page 650
page 651
page 652
page 653
ECLM
Series E metric
ECLM-HD
Series E metric
EGFM-T
Series E metric
page 654
page 655
page 656
EGZM
Series E metric
EGXM
Series E metric
WDGM
metric
KDGM
Series K metric
page 658
page 659
page 660
page 661
* in this catalog
igus (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 647
Order key
KGLM-02
d2 d1
KGLM
Compensation of misalignment and edge loads Corrosion-resistant High vibration-dampening capacity Suitable for rotating, oscillating and linear movements
30
Material: Housing: igumid G page 983 Spherical ball: iglidur W300 page 671
d1
E10
d2
Weight
axial*
[N] [Nm] [g]
KGLM-02 KGLM-03 KGLM-05 KGLM-06 KGLM-08 KGLM-10 KGLM-12 KGLM-14 KGLM-16 KGLM-18 KGLM-20 KGLM-22 KGLM-25 KGLM-30
300 550 1,300 1,800 2,700 4,000 5,400 6,000 8,000 9,000 10,000 11,700 13,600 20,000
60 200 500 650 1,200 1,400 1,500 2,500 3,000 4,000 5,000 6,500 7,500 9,000
1 2 5 10 12 20 30 35 40 45 55 60 65 70
2 3 5 6 8 10 12 14 16 18 20 22 25 30
8 10 13 16 19 22 26 28 32 35 40 42 47 55
4 6 8 9 12 14 16 19 21 23 25 28 31 37
3.0 4.5 6.0 6.5 9.0 10.5 12.0 13.5 15.0 16.5 18.0 20.0 22.0 25.0
32 32 30 29 25 25 25 23 23 23 23 22 22 22
0.1 0.5 1.0 1.6 2.9 4.4 7.0 9.1 12.8 16.6 24.4 28.5 39.3 62.6
www.igus.co.uk/pressfit-sphericals
Order key
KGLM-10 LC
d1
f
B C
30
d2
Material: Housing: igumid G page 983 Spherical balls: iglidur W300 page 671 Other spherical balls on request page 667
d1
30
Technical Data
Part number Max. static compressive strength (short term) radial
[N]
Weight
[g]
axial
[N]
Dimensions [mm]
Part number KGLM-10 LC KGLM-12 LC KGLM-16 LC KGLM-20 LC KGLM-25 LC KGLM-30 LC d1
E10
B 14 16 21 25 31 37
C 10.5 12 15 18 22 25
10 12 16 20 25 30
igus (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 649
Order key
KGLM-08 SL
Slim line Dimension Metric Pressfit spherical bearing Series Material: Housing: igumid G page 983 Spherical ball: iglidur W300 page 671
d2 Pressanpassung in Aufnahme d2
30
f
f
B
B
B
ma
5
x.
x.
ma
ma
x.
Very small space, wall thickness 50 % thiner than KGLM compared to KGLM Angle compensation up to 5 Low weight
d1 d1
axial
[N]
30
30
d1
E10
d2
Weight
radial
[N]
axial
[N] [g]
8 10 12 16
14 16 18 22
9.0
0.5
5 5 5 5
www.igus.co.uk/pressfit-sphericals
Order key
KGLM-16 H
Haptics Dimension Metric Pressfit spherical bearing Series
B C
d2
Material: Housing: igumid G page 983 Spherical ball: iglidur L250 page 239
0,8
Quiet operation Low tolerances Easy to install Chemical- and corrosion-resistant Compensation of misalignment errors, precise run
d1
30
d1
E10
d2
Weight
axial
[N]
radial
[N]
axial
[N] [g]
KGLM-16-H
4,000
300
2,000
150
16
32
21.0
15
22
12.2
igus (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 651
Order key
KGLI-03
d2 d1 d2 d1
30
KGLI
Inch dimensions Compensation of misalignment and edge loads Corrosion-resistant High vibration-dampening capacity Suitable for rotating, oscillating and linear movements
30
Material: Housing: igumid G page 983 Spherical ball: iglidur W300 page 671
d1
E10
d2
Weight
axial*
[N] [Nm] [g]
5 10 12 20 30 35 40 55 65
.5625 .312 .6562 .375 .7500 .437 .8125 .500 .9375 .562 1.0625 .625 1.1875 .750 1.4375 .875 2.1250 1.375
34 30 29 25 25 25 23 23 23
www.igus.co.uk/pressfit-sphericals
Order key
EGLM-04
Dimension Metric Pressfit spherical bearing Series
30
d2 d1
Compensation of misalignment errors and edge loads Corrosion-resistant High vibration-dampening capacity Suitable for rotating, oscillating and linear movements
Material: Housing: igumid G page 983 Spherical ball: iglidur W300 page 671
d1
E10
d2
Weight
axial*
[N] [Nm] [g]
EGLM-04 EGLM-05 EGLM-06 EGLM-08 EGLM-10 EGLM-12 EGLM-15 EGLM-16 EGLM-17 EGLM-20 EGLM-25 EGLM-30
600 1,000 1,200 1,800 2,500 3,800 5,500 6,000 6,300 9,000 14,000 17,000
50 130 150 175 400 650 1,000 1,150 1,200 1,400 2,900 4,000
1 2 2.5 7 14 25 30 32 35 40 55 70
4 5 6 8 10 12 15 16 17 20 25 30
12 14 14 16 19 22 26 28 30 35 42 47
5 6 6 8 9 10 12 13 14 16 20 22
3.0 4.0 4.0 5.0 6.0 7.0 9.0 9.5 10.0 12.0 16.0 18.0
37 33 27 24 24 21 21 21 21 18 16 13
0.4 0.8 0.9 1.2 1.9 2.8 6.9 9.0 10.6 16.3 29.0 37.4
igus (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 653
d1
Order key
d1
d1 b1
d4 b2
d2
y B
Very easy installation by simply snapping into sheet metal No additional axial fastening necessary Extremely small installation space: space-saving, thin-walled design
Technical Data
Part number Max. static compressive strength (short term) radial
[N]
axial
[N]
25 25 25 15 20 40
Dimensions [mm]
Part number ECLM-05-02 ECLM-06-02 ECLM-08-02 ECLM-10-03 ECLM-12-03 ECLM-16-03 d1
E10
d2
0.2
5 6 8 10 12 16
12 12 14 16 18 22
d2
ECLM-05-02
Sheet thickness Dimension Metric Self-aligning clip bearing Series
d4 d1
Material: Housing: igumid G page 983 Spherical ball: iglidur J page 674
Weight
axial
[N] [g]
d4 13 13 15 17 19 24
b1
0.1
www.igus.co.uk/pressfit-sphericals
d4
d2
Order key
d4
d1 E10
d2
ECLM-10-05-HD
Heavy Duty Sheet thickness Dimension Metric Self-aligning clip bearing Series Material: Housing: igumid G page 983 Spherical balls: iglidur W300 page 671 Other spherical balls on request page 667
High axial and radial loads Adjustment of axial and radial clearance by preloading Easily clips into sheet metal No additional axial fastening necessary For sheet thickness 5 mm
Technical Data
Part number Max. static compressive strength (short term) radial
[N]
d1 E10
Weight
axial
[N]
axial
[N] [g]
ECLM-10-05-HD
2,500
150
1,250
75
3.1
Dimensions [mm]
Part number ECLM-10-05-HD d1
E10
B 9.0
d2
0.15
d4 28
y
0.1
10.0
22.0
5.0
page 667
UWEM: for under water applications J4VEM: clearance-free spherical ball
igus (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 655
Order key
EGFM-08 T
Tolerance compensation Inner diameter d1 Metric Self-aligning clip bearing with flange Series Material: Housing: igumid G page 983 Spherical balls: iglidur W300 page 671 Other spherical balls on request page 667
Technical Data
Part number Max. stat. compressive force (short term) radial
[N]
Weight
[g]
axial
[N]
axial
[N]
Dimensions [mm]
Part number EGFM-08 T SL* EGFM-10 T EGFM-12 T EGFM-16 T EGFM-20 T EGFM-25 T EGFM-30 T d1 8 (H10) 10 (E10) 12 (E10) 16 (E10) 20 (E10) 25 (E10) 30 (E10) d2
min.
d2
max.
d3 18 26 28 35 42 50 55
B 6 9 10 13 16 20 22
Housing
min. max.
page 667
J4VEM: clearancefree spherical ball
www.igus.co.uk/pressfit-sphericals
My Sketches
igus (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 657
Order key
EGZM-04-25
d1 d1
EGZM-04-25 EGZM-04-50 EGZM-04-75 EGZM-05-25 EGZM-05-50 EGZM-05-75 EGZM-06-25 EGZM-06-50 EGZM-06-75 EGZM-08-60 EGZM-08-100 EGZM-10-60 EGZM-10-85 EGZM-10-100 EGZM-12-60 EGZM-12-100
d2 d2 x
x
a
a
b
b
Maintenance-free, self-lubricating Mechanical joining link between 2 components Compensation of misalignment errors Corrosion-resistant
Material: Housing: igumid G page 983 Spherical ball: iglidur W300 page 671
d1
E10
d2
Weight
axial
[N]
radial
[N]
axial
[N] [g]
1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 3,000 3,000 2,500 2,500 2,500 2,000 2,500
1,300 750 500 1,300 750 500 1,300 750 500 3,500 1,900 3,500 2,300 1,900 3,500 1,900
550 550 550 550 550 550 550 550 550 1,500 1,500 1,250 1,250 1,250 1,000 1,000
650 375 250 650 375 250 650 375 250 1,750 950 1,750 1,150 950 1,750 950
04 04 04 05 05 05 06 06 06 08 08 10 10 10 12 12
20 20 20 20 20 20 20 20 20 20 30 30 30 30 30 30
4 4 4 4 4 4 4 4 4 7 7 7 7 7 7 7
10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15
3.5 4.8 6.1 2.2 4.9 6.3 3.4 4.8 3.4 15.2 19.5 15.3 18.1 19.4 14.7 18.8
page 667
J4VEM: clearancefree spherical ball
www.igus.co.uk/pressfit-sphericals
Order key
EGXM-06-75
b2 b1 L
R1
Pitch Dimensions Metric Double joint, turned 90 Series
E10
Double joint, turned 90 Easy to fit Custom-design, with or without ball stud Maintenance-free iglidur W300 spherical ball
Material: Housing: igumid G page 983 Spherical ball: variabel page 667
Weight
[g]
EGXM-06-75
1,100
550
1,600
800
75
10
7.7
Further dimensions on request Further combinations: EGXM-06-75 ZM (with metal ball stud) EGXM-06-75 ZK (with plastic ball stud) EGXM-06-75 EK (with stainless steel ball)
igus (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 659
Order key
WDGM-05-XX
Center distance Dimension Metric Double joint Angle Version A Version B Version C
Socket cup M5, M6, M8 and M10 Individual center dimensions and lengths Individual alignment of the bearing position
Material: Housing: igumid G page 983 Ball stud: igumid G, steel or stainless steel
Dimensions [mm]
Part number WDGM-05-XX WDGM-06-XX WDGM-08-XX WDGM-10-XX d1 M5 M6 M8 M10 d2 12.8 14.8 19.3 24.0 d3 8.0 10.0 12.0 14.0 X
min.
Please complete the part no. with the required center distance in mm and the alignment of the bearing position. Order example: WDGM-05-100-A, center distance 100 mm, ball stud in the same alignment.
www.igus.co.uk/pressfit-sphericals
Order key
KDGM-06-XX
Center distance Dimension Metric Double joint Series
Version A
Version B
Ball diameters 6, 8, 10 and 12 mm Individual center dimensions and lengths Individual alignment of the bearing position
Material: Housing: igumid G page 983 Ball: iglidur W300, iglidur J, iglidur J4 and stainless steel
Dimensions [mm]
Part number KDGM-06-XX KDGM-08-XX KDGM-10-XX KDGM-12-XX d1
E10
Please complete the part no. with the required center distance in mm and the alignment of the bearing position. Order example: KDGM-05-100-A, center distance 100 mm, ball in the same alignment.
igus (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 661
My Sketches
www.igus.co.uk/pressfit-sphericals