You are on page 1of 4

5.

TIME BASE GENERATORS

1) The time during which the output increases is called as ( ) (a) fly back time (b) return time (c) sweep time (d) restoration time 2) The time taken by the signal return to initial value is called ( ) (a) Restoration time (b) return time (c) fly back time (d) all 3) Ratio of difference in slope at beginning and end of sweep to initial value of slope is called ( ) (a) sweep-speed error (b) displacement error (c) transmission error (d) none 4) The difference between the input and the output divided by the input at the end Of the sweep is called ( ) (a) slope speed error (b) sweep speed error (c) displacement error (d) transmission error 5) Relation between ( ) (a) (b) is (c) (d)

6) The following relation is correct ? ( ) (a) (b) (c) (d)all

7) Transmission error ( ( ) (a) (d) (b)

)= (c)

8) Miller circuit an operational integrator used to convert step voltage ( ) into ____ (a) Pulse waveform (b) ramp waveform (c) exponential waveform (d) all 9) The phatastron circuit pulse input is converted into __________ ( ) (a) step waveform (b) exponential waveform (c) ramp waveform (d) none 10) To improve the linearit of basic miller and boot strap tiem base generators is used ( ) (a) phatastron circuit (b) miller circuit (c) compensating networks (d) all 11) when the restoration tiem is zero we get _______ ( ) (a) saw tooth waveform (b) ramp waveform (c) both a & b (d) none 12) The ratio of maximum difference between the actual sweep voltage and the linear sweep to the amplitude of the sweep called ( ) (a) transmission error (b) slope speed error (c)displacement error (d) sweep speed error

13) In miller time base generator ( ) (a) inverting amplifier with gain unity (b) non-inverting amplifier with gain infinity (c) inverting amplifier with gain infinity (d) none 14) In boot strap time basegenerator ( ) (a) non-inverting amplifier with unity gain (b) inverting amplifier with infinite gain (c) both a & b (d) none 15) Miller tiem base generation produces ( ) (a) - ve going sweep (b) + ve going sweep (c) both a & b (d) none 16) boot strap tiem base generator produces ( ) (a) - ve going sweep (b) + ve going sweep (c) both a & b (d) none 17) In miller tiem base generator gain is required ( ) (a) 1 (b) 0 (c) (d) 2 18) In boot strap tiem base generator gain is required ( ) (a) 1 (b) 0 (c) (d) 2

19) which of the following relation is correct ( ) (a) all (b) (c) (d)

20) linear tiem base generator is one that provides output waveform ( ) which exhibits ___________ (a) linear variation of current (b) linear variation of voltage (c) both a & b (d) none

You might also like