Professional Documents
Culture Documents
ANDERSON GREENWOOD
INSTRUMENTATION PRODUCTS
Product Overview
The Large Bore IntelliMount direct mount manifold is the next generation of the ACCU-Mount System for natural gas, liquid or steam measurement applications. Designed for close-coupling DP or multi-instruments (D/P, pressure, electronic flowmeter, etc.) to senior and junior orifice changers and/or orificeflange unions. The Large Bore IntelliMount is available in renewable metal or soft seat configurations and features either GRAFOIL or Teflon stem packings. The Large Bore IntelliMounts superior design reduces the number of leakpoints and overall installation weight in relation to the former ACCU-Mount modular manifold system. Furthermore, the Large Bore IntelliMount is factory assembled and tested, decreasing required costly field-installation time. The Large Bore IntelliMount used with Coplanar transmitters features unique patented integral differential pressure/ pressure adapter plates. This feature eliminates the otherwise required Coplanar adapter flange, removing a potential leakpoint and unnecessary weight.
Flow Control
Total Flow Control Solutions
IntelliMount, ACCU-Mount, and Anderson Greenwood Instrumentation Products are either trademarks or registered trademarks of Tyco International Services AG or its affiliates in the United States and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.
Copyright 2008 Tyco Flow Control. All rights reserved. AGIMC-0347-US-0801
Materials
= Potential Leak Points
Standard SS Valve
Body Bonnet Stem Non-Wetted Parts 316 SS 316 SS 316 SS Austenitic SS
CS Valve
Body Bonnet Stem Non-Wetted Parts A105 CS 316 SS 316 SS Austenitic SS
Special
For severe service, manifolds are available in the following exotic materials: Monel Alloy 400 Duplex S31803 Hastelloy C276
Seat Temperatures
Delrin 200F [93C] maximum Teflon 500F [260C] maximum PEEK 400F [204C] maximum
Bolting
All IntelliMount assemblies are supplied with high tensile steel bolts as standard. Optional stainless steel bolts (B8M Class 2) are available; please specify when ordering. Notes
1. Coplanar is a trademark of Rosemount, Inc. 2. Delrin and Teflon are registered trademarks of E.I. duPont de Nemours and Company. 3. GRAFOIL is a registered trademark of Graftech International Inc. 4. Hastelloy is a registered trademark of Haynes International. 5. Monel is a registered trademark of Special Metals Corporation. 6. Viton is a registered trademark of DuPont Performance Elastomers.
Copyright 2008 Tyco Flow Control. All rights reserved. AGIMC-0347 2
10.9 [277]
8.1 [206]
Inlet
14.0 [356]
AF/5GDB Style
Single block for dual mounted biplanar transmitters.
D/P G/P
10.5 [267]
Vent
Inlet
AFD/5GC Style
Double block for Coplanar transmitters.
D/P
9.3 [336]
Vent
Inlet
AFS/5GC Style
Single block for Coplanar transmitter.
D/P
12.2 [310]
11.2 [284]
Vent
9.3 [236]
Inlet
AFD/5GDB Style
Double block for dual mounted biplanar transmitters.
D/P G/P
12.2 [310]
8.9 [226]
14.0 [356]
Vent
10.9 [277]
Inlet
Bonnet Technology
Valve Technical Specifications
The IntelliMount features high performance valves for reliable bubble-tight performance. Isolation is achieved with the H series plug valve or the optional FIRESAFE P (use FS designation for FIRESAFE service) non-rotating stem bonnet assembly. Venting and equalizing are achieved with the H7/H5 needle/globe valve.
Stem threads are located above the stem packing and are completely isolated from the process. Stem packing with GRAFOIL or Teflon for bubble-tight sealing. Optional FIRESAFE block valves to AP1 607.
Stem Packing Below the Threads Bonnet Lock Pin Bonnet Lock Pin Metal Seat for High Temperature Applications Bonnet-to-Body Metal Seal
Bonnet Lock Pin Stem Packing Below the Threads Rising Plug
Packing
Non-Rotating Plug
AGIMC-0347 4
Body Length
S Short (standard clearance - overall length 4.0" [101.6 mm]) L Long (additional clearance - overall length 5.6" [142.4 mm])
Construction Material
S A351-CF8M (316 SS) C A216-WCB (CS)
Options
H OC SSA1 SSB SSC1 GRAFOIL Gaskets (not available with incorporation of dielectric shielding option) Cleaned for oxygen service SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg] 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
Notes
1. 316 SS bolts lower pressure ratings to a maximum of 4500 psi [310 barg]. Consult factory for full rating with 316 SS bolts. 2. All standard AG stabilized connectors include Teflon gaskets. 3. All standard AG stabilized connectors include Carbon Steel A193 B7 bolts.
AGIMC-0347 5
AF
5GC
FS
Type
2 2B 2C 3 3B 3C 5G 5GC 5GB 5GD 5GDC 5GDB 5P 5PB 5PC 2-Valve Gauge Pressure Rosemount 305 2-Valve Gauge Pressure Biplanar 2-Valve Gauge Pressure Rosemount 305 with no Coplanar flange 3-Valve Rosemount 305 3-Valve Biplanar 3-Valve Rosemount 305 with no Coplanar flange 5-Valve (Gas) Rosemount 305 5-Valve (Gas) Rosemount 305 with no Coplanar flange 5-Valve (Gas) Biplanar 5-Valve, Dual Mount DP and Gauge Pressure Rosemount 305 5-Valve, Dual Mount DP and Gauge Pressure Rosemount 305, with no Coplanar flange 5-Valve, Dual Mount DP and Gauge Gas Biplanar 5-Valve (Power) Rosemount 305 5-Valve (Power) Biplanar 5-Valve (Power) Rosemount 305, with no Coplanar flange
Tap Orientation
H Horizontal V Vertical
Packing
V H Teflon GRAFOIL E Low Emissions Graphite
Seat
IS 316 SS Seat on Block and Integral on Instrument Module DI Delrin, Block Module only TI Teflon, Block Module only EI PEEK, Block Module only
Material
S 316 SS/316SSL M Monel C CS
Options
AM AMS BL FS CL OC SSA1 SSB SSC1 SG3 SP AGCO Mount Kit for 2-inch pipe stand mounting of manifold 316 SS AGCO Mount Kit for 2-inch pipe stand mounting of manifold Bonnet Lock Device (patent protected) FIRESAFE to API 607 Cleaned for chlorine service Cleaned for oxygen service SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg] 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg] (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2 (for Chloride conditions > 50 mg/l [ppm]) Special Requirements - please specify
Note
1. 316 SS bolts lower pressure ratings to a maximum of 4500 psi [310 barg]. Consult factory for full rating with 316 SS bolts.
AGIMC-0347 6