Professional Documents
Culture Documents
All Altec products are made to European standards. However, please note, loading ramps are not covered by CE regulations and should not show CE certification.
Altec loading ramps in manufacture. In the background is our automatic storage and selection system. Also shown is our capacity testing apparatus which is used as part of our in house quality control system. 2
Index
Type AOS up to 2300 kgs page 6/7
Type AOS
Small wheeled equipment such as trolleys, pallet trukks etc. are involved in many thousand of loading and unloading operations everyday. The aluminium profile used in the manufacture of AOS ramps is perfect for this type of equipment due to its perforated hi-grip anti-slip surface. The perforations allowing water and snow to drain very easily from the running surface, providing excellent traction for both pedestrians and equipment whatever the weather. AOS ramps are not fitted with safety curbs as standard, but they can be fitted as an option. They are also available in a folding version.
Length mm Width mm Thickness mm Bed Height 30 % gradient mm Capacity (kgs/pair) axle distance 1,0 m Weight (kgs/ea) Order code
1500 2000 2500 3000 1500 2000 2500 3000 3500 1500 2000 2500 3000 3500 4000 1500 2000 2500 3000 3500 1500 2000 2500 3000 3500 4000
200 (+15) 200 (+15) 200 (+15) 200 (+15) 300 (+15) 300 (+15) 300 (+15) 300 (+15) 300 (+15) 300 (+15) 300 (+15) 300 (+15) 300 (+15) 300 (+15) 300 (+15) 400 (+15) 400 (+15) 400 (+15) 400 (+15) 400 (+15) 400 (+15) 400 (+15) 400 (+15) 400 (+15) 400 (+15) 400 (+15)
60 60 60 60 60 60 60 60 60 70 70 70 70 70 70 60 60 60 60 60 70 70 70 70 70 70
0450 600 0750 900 450 600 0750 900 1050 450 600 750 900 1050 1200 450 600 750 900 1050 450 600 750 900 1050 1200
870 550 400 310 1340 890 650 510 410 1920 1620 1480 1330 1090 930 1680 1060 770 600 490 2390 2020 1850 1750 1530 1290
07 8 09 11 10 12 14 16 18 14 17 21 25 29 32 13 16 19 22 25 17 21 26 30 35 39
081.01.008 081.01.009 081.01.010 081.01.011 081.01.020 081.01.021 081.01.022 081.01.023 081.01.024 081.01.026 081.01.027 081.01.028 081.01.029 081.01.030 081.01.031 081.01.035 081.01.036 081.01.037 081.01.038 081.01.039 081.01.041 081.01.042 081.01.043 081.01.044 081.01.045 081.01.046
Length mm
Width mm
Thickness mm
Weight (kgs/ea)
Order code
600 (+15) 600 (+15) 600 (+15) 600 (+15) 600 (+15) 800 (+15) 800 (+15) 800 (+15) 800 (+15)
Width mm
60 60 70 70 70 70 70 70 70
19 23 31 38 44 32 41 50 59
Weight (kgs/ea)
Foldable version
Length mm L1 L2
200 (+15) 200 (+15) 200 (+15) 300 (+15) 300 (+15) 300 (+15)
8 9 11 12 14 16
Construction: AOS ramps have been designed to provide the maximum load capacity in their range, with the slimmest of profiles and with the lowest possible unit weight in maintenance free aluminium. The standard AOS design includes integral reinforcement. The slim design of the bottom section of AOS ramps which comes into contact with the ground, ensures a smooth transition from the horizontal surface to the ramp running surface with a maximum 5mm step.
B L2
L1 B H 40 mm folding option
B L H 40 mm
dimensions see page 32 without curbs standard curbs on both sides on request curb on one side on request lip support hooked lip hinged fitted standard on request on request
Type ABS
This aluminium ramp offers an excellent balance between a very low weight and a high load capacity. Robust and easy to handle, they are engineered to take up to 400 kg a pair with a maximum height difference of 900 mm. These ramps are fabricated from an extruded profile which is cut to length and angled as required. With an internal width of 150mm, and an overall width of 235 mm, these ramps are ideal for loading/unloading items such as motorbikes, high pressure cleaners, generator sets, wheelchairs etc Their profile allows them to be stacked one inside the other for ease of storage, and the 45 mm high safety curbs on each side prevent any lateral slippage.
235
47
150
L
150
Length mm
Weight (kgs/ea)
Type
Order code
5 6 8 10 12
Type ABS
folding
A foldable option is also available.
Length mm
Weight (kgs/ea)
Dimension
Order code
9 11 13
Length mm
Weight (kgs/ea)
without curbs
3000 3900
540 540
350 500
900 1170
29 36
080.01.050 110.01.050
080.00.050 110.00.050
Event ramp
The event ramp has been designed especially for the loading of trolleys or cases with small wheels. Probably used by musicians, event engineers or those loading flight cases. KVS coating surface ensures minimal vibration.
Length mm
Internal width mm
External width mm
Weight (kgs/ea)
Order code
3000 4000
900 900
400 350
900 1170
63 80
081.00.001 081.00.002 9
Type AVS 80
up to 2620 kgs/pair
These ramps are ideal for loading smaller rubber track and pneumatic tyre vehicles. The surface profile is extruded from a high quality aluminium alloy which guarantees longevity even with constant use. As with all AVS ramps, these are available with or without curbs or with curbs on one side only.
Length mm
Weight (kgs/ea)
305 (+20) 305 (+20) 305 (+20) 305 (+20) 305 (+20)
10 12 14 19 23
B A
25
B A
25
80
80
80
dimensions see page 32 without curbs standard curbs on both sides standard curbs on one side on request lip support hooked lip hinged fitted standard on request on request
10
Length mm
Weight (kgs/ea)
1610 1970 2330 3230 3950 4670 1610 1970 2330 3230 3950
245 245 245 245 245 245 340 340 340 340 340
305 (+20) 305 (+20) 305 (+20) 305 (+20) 305 (+20) 305 (+20) 400 (+20) 400 (+20) 400 (+20) 400 (+20) 400 (+20)
4050 3310 2800 1810 1360 1090 4050 3310 2800 1810 1360
500 590 720 950 1175 1400 500 590 720 950 1175
13 15 17 23 27 31 15 17 20 26 31
110.01.000 110.01.002 110.01.005 110.01.010 110.01.015 110.01.020 110.01.024 110.01.026 110.01.029 110.01.034 110.01.039
110.00.000 110.00.002 110.00.005 110.00.010 110.00.015 110.00.000 110.00.024 110.00.026 110.00.029 110.00.034 110.00.039
B A
30
B A
30
110
110
110
dimensions see page 32 without curbs standard curbs on both sides standard curbs on one side on request lip support hooked lip hinged fitted standard on request on request
11
Length mm
weight (kgs/ea)
405 (+20) 405 (+20) 405 (+20) 405 (+20) 405 (+20) 405 (+20)
26 31 35 40 45 50
B A
30
B A
30
130
130
130
dimensions see page 32 without curbs standard curbs on both sides standard curbs on one side on request lip support hooked lip hinged fitted standard on request on request
12
Length mm
Weight (kgs/ea)
460 (+20) 460 (+20) 460 (+20) 460 (+20) 460 (+20) 460 (+20)
36 41 48 53 58 65
B A
35
B A
35
150
150
150
dimensions see page 32 lip support hooked lip hooked lip hinged fitted standard on request on request on request
without curbs standard curbs on both sides standard curbs on one side on request
13
Length mm
Weight (kgs/ea)
520 (+20) 520 (+20) 520 (+20) 520 (+20) 520 (+20) 520 (+20) 520 (+20)
500 (+20) 500 (+20) 500 (+20) 500 (+20) 500 (+20) 500 (+20) 500 (+20)
41 46 54 58 64 71 74
B A
50
B A
50
170
170
170
dimensions see page 32 lip support hooked lip hooked lip hinged fitted standard on request on request on request
without curbs standard curbs on both sides standard curbs on one side on request
As an option these ramps can be supplied hinged, foldable and with a spring system.
14
Length mm
Weight (kgs/ea)
580 (+20) 580 (+20) 580 (+20) 580 (+20) 580 (+20) 580 (+20)
59 70 85 89 100 104
B A
65
B A
65
200
200
200
dimensions see page 32 lip support hooked lip hooked lip hinged fitted standard on request on request on request
without curbs standard curbs on both sides standard curbs on one side on request
All ramps are fitted with a reinforced surface, suitable for vehicles with rubber tracks.
Other dimensions on request
15
Type AVS
for steel tracked vehicles up to 8500 kgs/pair
These ramps are designed for use by all equipment including steel tracked vehicles. The ramps can be supplied with or without safety curbs. The running surface has been engineered with steel tracked equipment in mind, and is of a much harder wearing and heavier construction than the standard design. As an option these ramps can be supplied hinged, foldable, and with or without springing to balance the weight of the ramps.
500 (+20) 500 (+20) 500 (+20) 500 (+20) 500 (+20) 500 (+20)
44 49 57 64 70 79
520 (+20) 520 (+20) 520 (+20) 520 (+20) 520 (+20) 520 (+20) 520 (+20)
500 (+20) 500 (+20) 500 (+20) 500 (+20) 500 (+20) 500 (+20) 500 (+20)
51 58 68 73 81 90 94
580 (+20) 580 (+20) 580 (+20) 580 (+20) 580 (+20) 580 (+20)
B A
B A
dimensions see page 32 without curbs standard curbs on both sides standard curbs on one side on request lip support hooked lip hooked lip hinged fitted standard on request on request on request
16
17
Length L (mm)
Width B
(mm) 400 (+20) 450 (+20) 450 (+20) 450 (+20) 450 (+20) 450 (+20)
Weight (kgs/ea)
50 51 59 71 81 90
VFR guide rail, length 2600 mm, black order code 134.22.000; galvanised order-code 134.22.001
400
drawing A
470
18
156
The heavy duty profile and high grade aluminium used in our VFR 134 ramps ensures durability even when loading steel track machinery. These ramps are available with a hook on option or hinged to take a 60 mm bright steel bar. For heavier hinged ramps we recommend our spring counterbalance system.
Length L (mm)
Width B
(mm) 450 (+20) 450 (+20) 450 (+20) 600 (+20) 600 (+20) 600 (+20)
Weight (kgs/ea)
VFR guide rail, length 2600 mm, black order-code 134.22.000; galvanised order-code134.22.001
Other dimensions on request.
450
470 600
620 drawing A
drawing B
182
19
These profiles have been designed specifically for us to offer design solutions for low loader manufacturers.
60
Hooked version
20
They use a special aluminium construction for strength, durability and weatherresistance. These ramps can be supplied with a hinged end, or as a foldable version (spring counterbalancing is also an option). For ease of handling, several units can be positioned adjacent to each other. The height difference, dimension H, is required.
Length L (mm)
Width B
Capacity (kgs/pair)
Weight (kgs/ea)
070 92 110
drawing E
B + 20
drawing F
B + 20
L2
L1
21
Order code Model 134.00.901 Spring system for width 450 mm lateral movement 920 mm 134.00.902 Spring system for width 600 mm lateral movement 1010 mm
Weight (kgs/ea) 82 82
22
steel bar 60
920 /1010 + 90
VFR Loading ramp, foldable incl. spring system. In case of order, dimension H is required. Easy handling! Our counterbalance system allows heavy loading ramps to be positioned by one person. 23
Type RRK
geprfte Sicherheit
Construction: This aluminium ramp is designed for easy one man operation. The folding and unfolding of the ramp is made almost effortless by the use of gas struts to balance the weight of the ramp. The ramp surface is fabricated from extruded aluminium profiles which are perforated and embossed to give a perfect anti-slip surface. This also allows rain and snow to disperse very easily. The light weight of the ramp allows most of the pay load of the vehicle to be retained. The RRK is held in the vertical position by two latches, mounting blocks are used to keep the assembly rigid and prevent any vibration during transport. Other advantages: Virtually maintenance free Fitted with 30 mm high safety curbs along both edges. Robust hinges (guaranteed for life). Installation: The ramp is both removable and versatile, and can be mounted on different vehicles of identical dimensions, either as a rear or side loading ramp. If the vehicle is to be used for other purposes, the ramp is easily dismounted by unscrewing the thumb screws supplied. The ramps are supplied with a complete mounting kit including a base plate, and a reinforcing counter plate.
4 1 Ramp in folded position 2 Easily manoeuvred by one person 3 Ramp being unfolded 4 Pedestal for weights more than 450 kp
Length L (mm)
Width B
(mm) 0800 1000 0800 1000 0800 1000 0800 1000 1200 800 1000 800 1000 1200 0800 1000 1200 800 1000 800 1000
Height H (mm)
a (mm)
c (mm)
Capacity (kgs/pair)
Weight (kgs/ea)
Type
Order code
1400 1400 1600 1600 1800 1800 2000 2000 2000 2200 2200 2400 2400 2400 2600 2600 2600 2800 2800 3000 3000 24
0800 800 0875 875 980 980 1045 1045 1045 1150 1150 1250 1250 1250 1360 1360 1360 1465 1465 1570 1570
0220 220 0240 240 0285 285 0310 310 0310 355 355 400 400 400 0440 440 0440 485 485 530 530
0340 340 0380 380 0460 460 0500 500 0500 570 570 640 640 640 0700 700 0700 760 760 840 840
95 95 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 110
285 285 290 290 290 290 290 290 290 290 290 290 290 290 290 290 290 290 290 290 300
450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 430 430 400 400
37 43 39 46 41 50 44 53 64 46 56 51 60 72 53 63 73 56 66 58 68
RRK 02 RRK 03 RRK 04 RRK 05 RRK 06 RRK 07 RRK 08 RRK 09 RRK 10 RRK 11 RRK 12 RRK 00 RRK 01 RRK 14 RRK 15 RRK 16 RRK 17 RRK 18 RRK 19 RRK 20 RRK 21
081.01.102 081.01.103 081.01.104 081.01.105 081.01.106 081.01.107 081.01.108 081.01.109 081.01.110 081.01.111 081.01.112 081.01.100 081.01.101 081.01.114 081.01.115 081.01.116 081.01.117 081.01.118 081.01.119 081.01.120 081.01.121
265
50 min.
view X Ansicht X
X
85
90
HD
B + 200
140 max.
160
40
25
Type RRD
rotatable
The RRD is a logical development from the RRK. Basically the same ramp but with the facility to swivel back against the side panels of your van. An optional locking latch is available to keep the unit in the swivelled position. Perfect for parcel delivery firms.
Length L (mm)
Width B
Height H
(mm) 0800 1000 0800 1000 0800 1000 0800 1000 800 1000 800 1000 800 1000 800
(mm) 0865 865 0940 940 1045 1045 1115 1115 1220 1220 1325 1325 1430 1430 1535
a (mm)
c (mm)
Capacity (kgs/pair)
Weight (kgs/pair)
Type
Order code
1400 1400 1600 1600 1800 1800 2000 2000 2200 2200 2400 2400 2600 2600 2800
0220 220 0240 240 0285 285 0310 310 355 355 400 400 440 440 485
0340 340 0380 380 0460 460 0500 500 570 570 640 640 700 700 760
95 95 100 100 100 100 100 100 100 100 100 100 100 100 100
285 285 290 290 290 290 290 290 290 290 290 290 290 290 290
450 450 450 450 450 450 450 450 450 450 450 450 450 450 430
37 43 39 46 41 50 44 53 46 56 51 60 53 63 56
RRD 02 RRD 03 RRD 04 RRD 05 RRD 06 RRD 07 RRD 08 RRD 09 RRD 11 RRD 12 RRD 00 RRD 01 RRD 15 RRD 16 RRD 18
081.01.302 081.01.303 081.01.304 081.01.305 081.01.306 081.01.307 081.01.308 081.01.309 081.01.311 081.01.312 081.01.300 081.01.301 081.01.315 081.01.316 081.01.318
26
Maintenance ramps
Ideal for the maintenance of vehicles (inspection, cleaning etc.). These ramps are manufactured mostly as required, and can be supplied with or without safety curbs.
Length A (mm)
Width C (mm)
Width E (mm)
Hight H (mm)
Capacity
(kgs/pair) axle distance 2,0 m
Dimension B (mm)
Order code
14 18 19 23
17 20 29 33
A
H E C
27
Type LBGM
Removable model for fixing to an aluminium rail integrated within the tailboard. Includes wheel guides, and safety curbs both sides.
25
15
L
Weight kgs 13 15 18 24
Type LBWM
A removable model for fixing to an aluminium rail integrated within the tailboard. No wheel guides. Safety curbs on both sides.
25
L
15
735 625 50
Weight kgs 15 18 30
28
Removable model with a horizontal platform, galvanised hook fixing to the tail-board through 12 x 40 mm slots. Includes wheel guides, safety curbs both sides, and adjustable hooks.
15
Type LBK
150 65
slot 12 x 40
L 734 640 42 32 710 150
Weight kgs 12 15 18 24
Removable model galvanised hook fixing to the tail-board through 12x40 mm slots. Includes wheel guides, safety curbs both sides, and adjustable hooks.
Type LBG
10
105
slot 12 x 40
734 640 42 150 690 32
Weight kgs 13 15 18 24
Removable model galvanised hook fixing to the tail-board through 12x40 mm slots. Includes safety curbs both sides, and adjustable hooks. No wheel guides.
Type LBW
10
105 30
slot 12 x 40
50 735 625
690
Weight kgs 15 18 30
29
form is at ground level. When fitted to the rear of a commercial vehicle, they can serve as a tailboard and a load bearing access ramp. The tailboard ramps are fabricated from a honeycombe aluminium extrusion (model RPB) or in a five bar treadplate design plate (model RWB), both gives an anti-slip surface. Fitting kits are available as per figures 1, 2 or 3 and the hinge shaft is included.
Type RWB
Hinged tailboard with a five-bar treadplate surface.
Fitting kits
model 1
model 2
model 3
Type RPB-30
Hinged tailboard with 30 mm honeycombe profile.
Profile of edge closer -30 (offered as an option)
model 1
model 2
Order code: 390.00.020
model 3
Type RPB-40
Hinged tailboard with 40 mm honeycombe profile.
Profile of edge closer -40 (offered as an option)
model 3
30
Connection design
Figure 1
Bolted aluminium profile
Figure 2
Welded steel tube
Figure 3
Bolt or welded hinge
welded bolted
Length (L) mm
600 600 800 800 900 900 1000 1000
Width (B) mm
2300 2500 2300 2500 2300 2500 2300 2500
Capacity kgs
2500 2500 1900 1900 1700 1700 1500 1500
Weight kgs
40 44 53 58 59 65 66 72
Length (L) mm
565 690 815 940 1065 1190
Width (B) mm n o
Capacity kgs
3500 3000 2500 2300
Weight kgs(m)
16 19 22 26 29 32 35 42 45 48 54
2100
1900
1690
1565
1315
Length (L) mm
565 690 815 940 1065 1190
Width (B) mm n o
2065
1815
900 700
Capacity kgs
4500 4000 3500 3000
Weight kgs(m)
21 23 27 31 33 37 41 47 51 53 60
2800
2600
1690
1565
1315
2065
1815
1800 1400
31
30
12
20
AVS 110/130
Running surface AVS 110/130 110 30
40
100
40
40
20 53 102
123 149
15
AVS 150/170/200
Running surface 150/170/200 55 150 120
40 40 60
20 15
VFR 120
VFR 134
Underside hook/bar: An underside hook/bar is welded under the ramp to allow the attachment of a chain or strop (not supplied).
156
200
60
60
VFR 120/134
60
182 220
Lip with steel pin and movable safety device Lip with flat material underneath for hang in. Tube connection for steel shaft Lip with steel pin and movable safety device Lip with flat material underneath for hang in.
Tube connection for steel shaft Lip with steel pin and underside hook bar. Lip with flat material underneath for hang in. Tube connection for steel shaft. Hang in profile
32
182 220
Diagram
Length determination
In the margin diagram, youll find dimensions, which are used for loading or unloading. They are: length of loading ramps gradient and height difference and how they are in relation to each other.
Example: At a height difference of 1200 mm and a gradient of 30%, How long the ramps have to be? Calculation: 1200 mm x 100 = length 4000 mm 30
It is not adviseable to use ramps, which have a gradient of more than 30%.
Ramp length (mm)
Height difference
vehicle weight wheel load diameter and width of wheels Please check these datas, as well as the dimensions at the fork lift.
33
Examples of use
AOS loading ramps AOS loading ramps special version RRK-ramp and ABS loading ramps in combination Light weight ABS ramps. For heavy duty, triple track vehicles Foldable with pedestal AVS 150 in use RRK-ramp Wheel ramps to balance height differences VFR-ramps, hinged with counter balance system. Special tailgate ramps VFR-ramps with lip support
34
Our experienced technical staff will be glad to develop your individual solution.
35
Bridge plates
ALTEC GmbH
Rudolf-Diesel-Str. 7, D-78224 Singen
Phone
Fax