Professional Documents
Culture Documents
Up to 55% increased flow when entire system is installed compared to a standard globe valve system
ME806-16 ME868-16
The Turbo-Flo LE (Low Emission) Transfer System is the industries most efficient and cost-effective way to transfer LP-Gas in bobtail, transport, railcar, and bulk plant applications. This product will pay for itself through gas savings during disconnect and its increased flow rate. While any part of this system is interchangeable with other standard systems, to receive maximum savings, all three products (LE Transfer Valve, LE Acme Adapter, and MEC Globe Valve) must be used simultaneously.
Heavy duty spring loaded safety latch prevents accidental opening of valve
Hardened steel bearing race with stainless steel ball bearings for maximum product life
Transfer System Features Minimum $350 $avings per 1,000 fills Reduces product emissions by 99.6% over standard valves 100% compatible with existing Acme transfer connections All stainless steel internal components Convenient carrying handles and custom fit dust plug with lanyard (not shown)
Cam operated equalization feature for smooth valve operation. Protected hydrostatic relief valve
Pilot orifice allows the valve to equalize and open only when the valve is attached to the mating part. When the valve is not attached to the mating part, the valve cannot equalize and will not open.
ME866-8 ME866A-8 ME866-10 ME866A-10 ME867-10 ME867A-10 ME868-16* ME868A-16* ME868-24* ME868A-24*
Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass
ME868BLK
MEP105
ME868BLK Bypass Line Kit is used to create a one-way closed loop between the upstream and downstream sides of a Marshall Excelsior 2 globe valve when used in conjunction with a ME868 Series low emission Acme adapter. The kit features a brass one-way check valve and preformed heavy wall copper tubing with brazed end fittings for durability. This product is intended to prevent over pressurization of the ME868 Series low emission Acme adapters making them truly low emission. This product will also greatly reduce pressures within the ME868 Series adapters thereby decreasing any wear that may occur to the shutoff valves or the low emission Acme adapter. ME868MIB Mechanical Interlock Bracket allows for a standard Parker style pneumatic air roller valve normally used in conjunction with standard bobtail brake interlock systems to be retro-fit to the ME868 Series low emission Acme adapters. This bracket system allows the standard brake interlock system and connections to be moved forward to the end of the low emission adapter where normal contact with the ME441F8 flange Acme cap can occur. The kit includes all bracketing and mounting hardware. (Kit does not include Parker style pneumatic roller valve) ME868PIB Proximity Interlock Bracket uses the new MEC smart interlock technology designed to connect with the Allison automatic transmission auxiliary function range inhibit preventing operation of the bobtail while this connection is in use. MEC smart interlock technology incorporates a high grade Turck proximity switch that senses the presence of the stainless steel flange on the ME441F8 Acme cap when secured tightly to the ME868 Series low emission Acme adapter. This kit comes complete with all mounting hardware, MEC smart interlock technology and wiring harness to reach 5 below the deck of the bobtail.
MEP105 This adapter allows for the periodic evacuation and testing of a bobtails internal back check valve during five year inspection requirements. The adapter fits snuggly into the female Acme side of a ME130 which then can be threaded onto the ME868 Series low emission Acme adapter pushing the valve poppet to the open position thereby depressurizing the system for testing purposes. (Note: Be sure to consult instruction manual supplied with MEP105 test adapter before attempting use.)