Professional Documents
Culture Documents
DEZ 1995
NBR 13544
Copyright 1995, ABNTAssociao Brasileira de Normas Tcnicas Printed in Brazil/ Impresso no Brasil Todos os direitos reservados
Origem: Projeto 07:000.09-005/1995 CB-07 - Comit Brasileiro de Navios, Embarcaes e Tecnologia Martima CE-07:000.09 - Comisso de Estudo de Massame e Poleame NBR 13544 - Lifting purposes - Thimble for steel wire rope Descriptors: Thimble. Lifting and lowering of loads Esta Norma cancela e substitui as NBR 10870/1989 e NBR 10871/1989 Esta Norma foi baseada na ISO 2262/1984 Vlida a partir de 29.01.1996 Palavras-chave: Sapatilho. Movimentao de carga 7 pginas
Sumrio
Prefcio 1 Objetivo 2 Referncias normativas 3 Definies 4 Caractersticas dos sapatilhos 5 Amostragem e critrio de conformidade 6 Verificao e ensaio 7 Designao 8 Marcao
Contents
Foreword 1 Scope 2 Normative references 3 Definitions 4 Characteristics of thimble 5 Sampling and criteria of conformity 6 Checking and testing 7 Designation 8 Marking
Prefcio
A ABNT - Associao Brasileira de Normas Tcnicas - o Frum Nacional de Normalizao. As Normas Brasileiras, cujo contedo de responsabilidade dos Comits Brasileiros (CB) e dos Organismos de Normalizao Setorial (ONS), so elaboradas por Comisses de Estudo (CE), formadas por representantes dos setores envolvidos, delas fazendo parte: produtores, consumidores e neutros (universidades, laboratrios e outros). Os projetos de Norma Brasileira, elaborados no mbito dos CB e ONS, circulam para Votao Nacional entre os associados da ABNT e demais interessados.
Foreword
ABNT - Associao Brasileira de Normas Tcnicas - is the Brazilian standardization Forum. Brazilian Standards, the content of which is the responsibility of the Comits Brasileiros (CB) and Organismos de Normalizao Setorial (ONS), are drawn up by Comisses de Estudo (CE). Such CE committees are made up of representatives of the sectors involved and include producers, consumers and neutral entities (universities, laboratories an others). Draft Brazilian Standards, prepared by CB and ONS, are circulated to the ABNT members and other interested entities for National Voting.
1 Objetivo
Esta Norma especifica as caractersticas dos sapatilhos para cabo de ao.
1 Scope
This Standard specifies the characteristics of thimbles for use with steel wire ropes.
Licena de uso exclusivo para ABC Cpia impressa pelo sistema CENWin em 16/08/2001
NBR 13544/1995
2 Referncias normativas
As normas relacionadas a seguir contm disposies que, ao serem citadas neste texto, constituem prescries para esta Norma. As edies indicadas estavam em vigor no momento desta publicao. Como toda norma est sujeita a reviso, recomenda-se queles que realizam acordos com base nesta que verifiquem a convenincia de se usarem as edies mais recentes das normas citadas a seguir. A ABNT possui a informao das normas em vigor em um dado momento. NBR 6323/1990 - Produto de ao ou ferro fundido revestido de zinco por imerso a quente - Especificao NBR 7397/1990 - Produto de ao ou ferro fundido revestido de zinco por imerso a quente - Determinao da massa do revestimento por unidade de rea - Mtodo de ensaio ISO 6892/1984 - Metallic materials - Tensile testing
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. ABNT maintains registers of currently valid standards. NBR 6323/1990 - Produto de ao ou ferro fundido revestido de zinco por imerso a quente - Especificao NBR 7397/1990 - Produto de ao ou ferro fundido revestido de zinco por imerso a quente - Determinao da massa do revestimento por unidade de rea - Mtodo de ensaio ISO 6892/1984 - Metallic materials - Tensile testing
3 Definies
Para os efeitos desta Norma aplicam-se as seguintes definies: 3.1 sapatilho: Acessrio de cabo de ao em forma de gota, com seo em meia-cana, utilizado para proteo do olhal do cabo de ao. 3.2 tamanho nominal (TN): Dimetro nominal do cabo de ao para o qual o sapatilho se destina.
3 Definitions
For the purposes of this Standard the following definitions apply: 3.1 thimble: A drop-shaped component for use with steel wire ropes, with a half-round cross-section, which is fitted to the eye of the rope for protection. 3.2 nominal size (NS): Nominal diameter of the wire rope for which the thimble is intended.
4 Characteristics of thimble
4.1 Material The steel from which the thimbles are to be formed shall present the following mechanical properties, when tested in accordance with ISO 6892: a) tensile strength of 360 MPa to 520 MPa; b) minimum elongation of 20% after fracture. 4.2 Workmanship
4.2.1 Thimbles shall be finished and free from any flaw, defect, sharp edges or roughness which might damage the steel wire rope. 4.2.2 The joint formed at the points of the thimbles having a
nominal size up to 45 mm shall not be welded and a small gap at the joint may be allowed. Thimbles having a nominal size equal to or greater than 52 mm should preferably have welded or reinforced joints, in accordance with figure 1. 4.3 Form and dimensions The form and dimensions of thimbles shall be in accordance with figure 1 and table 1, respectively.
4.3 Forma e dimenses A forma e as dimenses dos sapatilhos devem ser conforme a figura 1 e a tabela 1, respectivamente.
NBR 13544/1995
Licena de uso exclusivo para ABC Cpia impressa pelo sistema CENWin em 16/08/2001
4.4 Carga de prova Todo sapatilho deve ser capaz de suportar a carga de prova da tabela 2. Aps aplicao da carga no deve haver reduo maior do que 15% do valor original da dimenso C, conforme a seguinte equao: C original - C aps a carga 0,15 C original 4.5 Proteo superficial Os sapatilhos devem ser fornecidos zincados a frio, com deposio de zinco de pelo menos 120 g/m2, conforme a NBR 7397. Quando solicitado pelo comprador, os sapatilhos podem ser fornecidos zincados a quente, conforme a NBR 6323.
4.4 Proof load All thimbles shall be capable of sustaining the proof load specified in table 2. After applying the load the original value of dimension C shall not be reduced by more than 15% according to the following equation: C original - C after load 0,15 C original 4.5 Surface protection Thimbles shall be furnished with electroplated coating of zinc, with a zinc deposition of at least 120 g/m, in accordance with NBR 7397. When requested by the purchaser, thimbles may be furnished with hot dip zinc coating, as specified in NBR 6323.
6 Verificao e ensaio
6.1 Verificao das dimenses As dimenses devem ser verificadas atravs de instrumentos que tenham exatido de pelo menos 0,1 mm. A espessura A deve ser medida em local que no seja afetado pelo processo de fabricao, como, por exemplo, na regio do corte AA da figura 1. 6.2 Ensaio de carga de prova
O sapatilho deve ser instalado em cabo de ao da classificao 6x19 ou 6x37 e ser submetido carga axial da tabela 2. A carga de prova deve ser aplicada no sapatilho atravs de um pino com dimetro 1,5 d (onde d o dimetro nominal do cabo de ao).
The thimble shall be fitted to a rope of 6x19 or 6x37 class and shall be axially loaded to the values given in table 2. The force shall be applied to the thimble through a pin with a diameter of 1,5d (where d is the nominal diameter of the rope).
Licena de uso exclusivo para ABC Cpia impressa pelo sistema CENWin em 16/08/2001
NBR 13544/1995
A
C
Fabricante Manufacturer
A B
Corte AA Section AA
b) Sapatilho com reforo Thimble with reinforcement Figura 1 - Sapatilho Figure 1 - Thimble
NBR 13544/1995
Licena de uso exclusivo para ABC Cpia impressa pelo sistema CENWin em 16/08/2001
Tabela 1 - Dimenses do sapatilho Table 1 - Dimensions of thimbles Dimenses em mm Dimensions in mm Tamanho nominal Nominal size TN 4,8 6,4 8 9,5 13 16 19 22 26 29 32 38 45 52 64 71 77
NOTAS 1 A mn. = 0,25 d B mn. = 4,5 d C mn. = 2,5 d C mx. = 3,0 d E mn. = 0,75 d J = B - C/2 Onde d o dimetro nominal do cabo de ao. 2 As dimenses A e E devem ser medidas na parte reta do sapatilho (regio do corte AA da figura 1). 3 Para cabo de ao com dimetro nominal intermedirio, convm utilizar sapatilho de tamanho nominal imediatamente superior. 4 A dimenso mxima E no deve ultrapassar o tamanho nominal.
A mnimo minimum 1,2 1,6 2,0 2,8 3,6 4,0 5,1 6,0
B mnimo minimum 22 29 36 43 59 72 86 99 117 mnimo minimum 12 16 20 24 33 40 48 55 65 73 80 95 113 130 160 178 193
C mximo maximum 14 19 24 29 40 49 57 67 78 87 96 114 135 156 192 213 230 mnimo minimum 5,0 6,7 8,7 10,3 13,7 16,7 19,9 23,3 26,7 30,0 33,3 40,0 46,7 53,3 66,7 73,4 80,0
D mximo maximum 5,5 7,4 9,8 11,8 15,7 18,7 21,9 25,5 29,2 32,9 36,4 43,8 51,2 58,4 73,0 80,4 87,6
E mnimo minimum 3,6 4,8 6,0 7,1 9,5 12,0 14,2 16,7 19,0 21,4 23,8 28,6 33,4 38,1 47,6 52,4 57,2
I ref. ref. 19 25 25 25
R ref. ref. 65 70 80 87
7,4 8,8
12,0
203 234
15,0 18,0
NOTES 1 A min. = 0,25 d B min. = 4,5 d C min. = 2,5 d C max. = 3,0 d E min. = 0,75 d J = B - C/2 where d is the nominal diameter of the wire rope. 2 Dimensions A and E shall be measured on the strai part of the thimble (region of section AA in the figure 1). 3 For steel wire rope having an intermediate nominal diameter, the use of a thimble having a nominal size immediately above is recommended. 4 Maximum dimension E shall not exceed the nominal size.
Licena de uso exclusivo para ABC Cpia impressa pelo sistema CENWin em 16/08/2001
NBR 13544/1995
Tabela 2 - Carga de prova para sapatilho Table 2 - Proof force for thimbles Tamanho nominal Nominal size 8,0 9,5 13,0 16,0 19,0 22,0 26,0 29,0 32,0 38,0 45,0 52,0 64,0 71,0 77,0 Carga de prova (kN) Proof force (kN) 13 19 33 52 74 100 130 164 202 287 385 499 762 912 1075
Tabela 3 - Amostragem para inspeo visual e dimensional Table 3 - Sampling for visual and dimensional inspection Tamanho do lote Size of lot at 90/up to 90 91 - 280 281 - 500 501 - 1200 Tamanho da amostra Size of sample 3 13 20 32 Nmero de peas defeituosas aceitvel Acceptable number of defectives 0 1 2 3
Tabela 4 - Amostragem para ensaio de carga de prova Table 4 - Sampling for proof force test Tamanho do lote Size of lot at 50/up to 50 51 a 150/ from 51 to 150 acima de 150/over 150 Tamanho da amostra Size of sample 2 4 8 Nmero de peas defeituosas aceitvel Acceptable number of defectives 0 0 1
NBR 13544/1995
Licena de uso exclusivo para ABC Cpia impressa pelo sistema CENWin em 16/08/2001
7 Designao1 )
Os sapatilhos devem ser designados da seguinte forma: a) nome; b) proteo superficial;
7 Designation1)
Thimbles shall be designated as follows: a) name; b) surface protection;
c) tamanho nominal (TN); d) nmero desta Norma/ano. c) nominal size; d) number of this Standard/year.
8 Marcao
Os sapatilhos devem ser marcados em seu corpo, em relevo, conforme a figura 1, com pelo menos as seguintes informaes: a) smbolo ou marca do fabricante; b) tamanho nominal (TN).
8 Marking
Thimbles shall be marked on their body, in relief, in accordance with figure 1, with at least the following information: a) manufacturers symbol or trademark; b) nominal size (NS).
1)
Exemplo: sapatilho para cabo de ao, zincado, TN 13 mm, NBR 13544/1995. Example: thimble for zinc-coated wire rope, NS 13 mm, NBR 13544/1995.