Professional Documents
Culture Documents
com
Product: Revised: HazMat Name: STCC: Test Viscosity, CST @ 0C Viscosity, CST @ 40C Viscosity, CST @ 100C Viscosity, SUS @ 100F Gravity, API, 60F Density @ 15C, KG/DM3 Flash Point, COC, C Flash Point, COC, F Pour Point, C Pour Point, F Color, ASTM Aniline Point, C Aniline Point, F Neut. No., MG KOH/G Water Content, ppm Dielectric Breakdown @ 60 HZ Disk Electrodes, KV KV 1.02 MM Gap KV 2.03 MM Gap Dielec. Brkdwn, Impulse Conds. 25C, Needle Neg. to Sphere Grounded, 25.4 MM Gap, KV Corrosive Sulfur Interfacial Tension, Dynes/CM Oxidation Stability 72 hr Sludge, Mass % 72 hr Acid No., MG KOH/G 164 hr Sludge, Mass % 164 hr Acid No., MG KOH/G Oxidation Stability, RBOT, MIN Oxid.Inhib. Content, Mass% Gassing Tendency Micro L/MIN (Procedure B) Power Factor, 25C, % Power Factor, 100C, % Visual Examination PCB Content, PPM
Printed 1/12/2012 10:35 AM EST
Caltran 60-30 (Type II) 02/10/2010 Non-Regulated 29-114-15 Method D445 D445 D445 D2161 D4052 D4052 D92 D92 D97 D97 D1500 D611 D611 D974 D1533 D877 D1816 D1816 D3300 MIN
Product Code:
3020-00-J
Typical 62.23 9.23 2.35 58.58 28.5 0.8838 151 304 -56 -69 L0.5 75.8 168.4 0.013 11 42 30 60
300 n/corros. 48.0 0.01 0.01 0.03 0.01 220 0.26 +24 0.001 0.04 B&C <1
Page: 1/2
2780 Waterfront Pkwy. E. Dr. Suite 200 Indianapolis, IN 46214 Phone: 317-328-5660 Fax: 317-328-5668 Sales: 1-800-437-3188 www.calumetspecialty.com
Copyright 2008 Calumet Specialty Products Partners, L.P. Calumet's sampling and testing procedures in effect at the time of production will be used for certification testing. Results may be based on tank certification, manufacturing data, periodic testing and/or most recent product restock. Typical values only represent the values one would expect if the property were tested in our laboratories with our test methods on the specified date. Some product properties are not frequently measured, and accordingly typical values are not based on a statistically relevant number of tests. The information in this document relates only to the named product. The user is solely responsible for all determination regarding any use and any process.
EST
Page: 2/2