Professional Documents
Culture Documents
2 / 778
Contents
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 1.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 1.2 9153 OMC-R AS Alarm Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 1.3 LMT Alarm Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 1.4 Alarm Information Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Class 32: BSC-ENVIRON Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 2.1 [32,0] CONV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 2.2 [32,1] BAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Class 33: PROCESSOR Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 3.1 [33,0] RESTART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 3.2 [33,1] RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 3.3 [33,3] ACCESS-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 3.4 [33,4] RELC-OV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 3.5 [33,7] TAKEOVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 3.6 [33,9] SDCCH-OVRL-BSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Class 35: N7 Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 4.1 [35,0] LNK-REP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 4.2 [35,2] RTE-REP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 4.3 [35,3] INC-REP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 4.4 [35,4] ASL-REP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 4.5 [35,5] RMH-REP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 4.6 [35,6] MSC-REP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 4.7 [35,7] MSC_DEGRADE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Class 36: TRUNK Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 5.1 [36,0] LFA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 5.2 [36,3] RAI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 5.3 [36,4] AIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 5.4 [36,5] SLIP-OV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 5.5 [36,6] SLIP-UN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 5.6 [36,7] LOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 5.7 [36,10] CRCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 5.8 [36,11] CHO-EERH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 5.9 [36,12] CRC4-BERH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 5.10 [36,13] CRC4-BERL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Class 38: X.25 Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 6.1 [38,0] MODEM-FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 6.2 [38,1] LINK-FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 6.3 [38,2] PROT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Class 39: BSC-SW-ANOMALY Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 7.1 [39,1] OSN-NON-RECOVERABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 7.2 [39,3] OSN-PROCEDURAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 7.3 [39,5] USR-NONRECOVERABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 7.4 [39,7] HWR-NONRECOVERABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 7.5 [39,18] SANITY-TIMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Class 42: TELECOM Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 8.1 [42,1] NACK-MSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 8.2 [42,2] OVERLOAD-MSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 8.3 [42,3] START-RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 8.4 [42,7] NO-RESET-CIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
3 / 778
Contents
10
11
12
13
8.5 [42,9] OVERLOAD-BSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.6 [42,12] TEL-PAIR-LOST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.7 [42,13] BSC-TRAFFIC-REPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.8 [42,14] GPRS-RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.9 [42,15] TCH-RM-FAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.10 [42,16] MSC-TRAFFIC-REDUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 43: CELL Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.1 [43,0] LOSS-OF-BCCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.2 [43,1] LOSS-OF-SDCCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.3 [43,2] LOSS-OF-TCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.4 [43,3] LOSS-OF-ALL-CHAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5 [43,4] CELL-TRAFFIC-REPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.6 [43,5] OVERLOAD-BTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.7 [43,6] TRX-MAPPING-CHANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.8 [43,248] CONFIGURED POOLS NOT FULLY USABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 44: BTS-OM Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.1 [44,0] AUDIT-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.2 [44,1] PROTOCOL-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.3 [44,2] RECONFIG-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.4 [44,3] DOWNLOAD-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.5 [44,5] SW-ACTIVATE-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.6 [44,6] CONFIG-DATA-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7 [44,7] OMU-SELFTEST-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.8 [44,10] ABORT-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.9 [44,11] PRELOAD-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.10 [44,12] BTS-HW-CONFIG-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 45: CHANNEL Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.1 [45,0] CH-UNBLOCK-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.2 [45,1] CH-BLOCK-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.3 [45,2] BSC-CIC-UNKNOWN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.4 [45,3] MSC-CIC-UNKNOWN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.5 [45,4] END-OF-REP-OF-UNBLOCK-PROC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 46: BACKUP-MEDIUM Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.1 [46,0] SYNC CORRUPTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.2 [46,1] UNSYNC-OTHER-CORR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.3 [46,2] UNSYNC-OWN-CORR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4 [46,3] SYNC-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.5 [46,4] SECFILE-ROLLBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.6 [46,5] SINGLE-UPD-ROLLBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.7 [46,6] DUT-ROLLBACK-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.8 [46,7] DISC-OOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.9 [46,8] DISC-PARITY-ERROR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 47: GLOBAL-BSC Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.1 [47,2] AUTO-BSC-RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.2 [47,3] AUTO-BSC-RESTART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.3 [47,4] BSC-SYNC-REQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.4 [47,5] BTS-SYNC-REQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.5 [47,6] AUDIT-COMPLETED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.6 [47,7] BSC-HW-RESYNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.7 [47,8] AIFL-FULL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.8 [47,9] CBC-CONNECTION-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.9 [47,11] ABIS-TS-ALLOC-FAILED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.10 [47,12] INSUFFICIENT-TCU-RES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.11 [47,13] TRE-SECTOR-MISMATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.12 [47,14] LACK-OF-TCU-SPACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
103 104 106 108 110 111 113 114 116 118 120 122 124 126 127 129 130 132 134 136 138 140 142 144 145 147 149 150 152 154 156 158 159 160 161 163 164 165 167 169 171 173 175 176 177 178 179 180 181 182 183 185 186 187 189
4 / 778
Contents
14
15
16
17
18
19
13.13 [47,15] SWRPL-IN-PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.14 [47,16] MAX-TRE-EXCEEDED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.15 [47,17] MLPPP-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.16 [47,18] MLPPP-PARTIAL-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.17 [47,19] DLS-RESTORATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.18 [47,20] NTP-DRIFT-TIME-ALERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.19 [47,21] NTP-TIME-SERVER-UNREACHABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.20 [47,22] NTP-DRIFT-TIME-EXCEEDED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.21 [47,23] MAX-HDLC-EXCEEDED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.22 [47,24] MUX-SECTOR-NOT-COMP-2ABIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.23 [47,25] TC-HW-RESYNCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.24 [47,26] TRAU-CP-OUT-OF-RANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.25 [47,27] TRAU-CP-ON-DEDICATED-ATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.26 [47,28] TRAU-CP-DOUBLE-DECLARED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.27 [47,30] TRANS-CONFIG-IMPOSSIBLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.28 [47,40] CS-TEL-TEST-NOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.29 [47,41] PS-TEL-TEST-NOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.30 [47,103] BTS-TC-RESHUFFLING-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.31 [47,200] N7-CONF-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 48: TR-OM Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.1 [48,0] AUDIT-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.2 [48,1] PROTOCOL-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 49: ALERTER Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.1 [49,0] LOW-TRAF-SDCCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.2 [49,1] CH-INCONSIST-SUSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.3 [49,2] TCH-BLOCK-SUSPECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.4 [49,3] TCH-OCCUP-SHORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 50: BSC EXTERNAL Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.1 [50,1] EXT-ALARM-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.2 [50,2] EXT-ALARM-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.3 [50,3] EXT-ALARM-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.4 [50,4] EXT-ALARM-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5 [50,5] EXT-ALARM-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.6 [50,6] EXT-ALARM-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.7 [50,7] EXT-ALARM-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.8 [50,8] EXT-ALARM-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.9 [50,9] EXT-ALARM-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.10 [50,10] EXT-ALARM-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 51: SWITCH G2 Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.1 [51,0] TRANSIENT-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.2 [51,1] SWITCH-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.3 [51,2] ROUTINE-TEST-REP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.4 [51,3] GLOBAL-ROUTINE-TEST-REP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 52: BSC CLOCK Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.1 [52,0] LOSS-OF-SEL-CLK-INP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.2 [52,1] LOSS-OF-CLK-GEN-FN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3 [52,2] SWITCH-TO-LOCAL-CLK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.4 [52,3] LOSS-OF-SYSTEM-CLOCK-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.5 [52,4] LOSS-OF-SYSTEM-CLOCK-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.6 [52,5] LOSS-OF-CLK-DISTR-FN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.7 [52,6] BSC-RUN-ON-LOCAL-CLK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.8 [52,7] LOC-CLK-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 53: BROADCAST BUS Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.1 [53,0] LOSS-OF-ONE-BROAD-BUS-BSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
190 192 194 196 198 199 201 203 205 207 208 209 210 211 212 213 214 216 217 219 220 221 223 224 226 228 229 231 232 234 236 238 240 242 244 246 248 250 253 254 255 259 261 263 264 266 267 269 270 271 272 274 275 276
5 / 778
Contents
20 21
22
23 24 25
19.2 [53,1] LOSS-OF-BOTH-BROAD-BUS-BSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.3 [53,2] DMA-PROBLEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.4 [53,3] LOSS-OF-ONE-BROAD-BUS-RACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.5 [53,4] LOSS-OF-BOTH-BROAD-BUS-RACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.6 [53,5] DEGRAD-BROAD-BUS-RACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.7 [53,6] LOSS-OF-ONE-BROAD-BUS-CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.8 [53,7] LOSS-OF-BOTH-BROAD-BUS-CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.9 [53,8] DEGRAD-BROAD-BUS-CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 54: BTS-POOL Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.1 [54,1] EXTRA TS NOT FULLY USABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 66: TSC-TRUNK Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.1 [66,21] LOOP-TO-ITF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.2 [66,22] LOOP-TO-EQUIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.3 [66,50] TWO-MB-MISSING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.4 [66,66] AIS-2-MB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.5 [66,81] FRAME-ALIGNMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.6 [66,86] CRC-MFRAME-ALGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.7 [66,99] BER-10E-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.8 [66,100] BER-10E-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.9 [66,102] BER-10E-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.10 [66,176] FAR-END-ALARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.11 [66,208] I1I2-AIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.12 [66,210] TRANS-FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.13 [66,211] LOSS-OF-CLK-2M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.14 [66,225] TU-LOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.15 [66,226] TU-AIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.16 [66,227] LP-UNEQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.17 [66,228] LP-RDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.18 [66,229] LP-PLM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.19 [66,230] LP-J2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.20 [66,231] E1-AIS-2MB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.21 [66,232] E1-FRAME-ALIGNMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.22 [66,233] E1-CRC-MFRAME-ALGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.23 [66,234] E1-BER-10E-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.24 [66,235] E1-BER-10E-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.25 [66,236] E1-RAI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 67: TSC-CHANNEL Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.1 [67,22] LOOP-TO-EQUIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.2 [67,72] AIS-16-KB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.3 [67,122] TRAU-SYNCHRO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.4 [67,128] EQUIPMENT-FAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.5 [67,130] MEMORY-FAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.6 [67,131] INT-BUS-FAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 70: TSC-SW-ANOMALY Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23.1 [70,219] SW-FAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 71: TSC-ENVIRON Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.1 [71,0] POWER-SUPPLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 73: BSC-ADAPT Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.1 [73,22] LOOP-TO-EQUIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.2 [73,128] EQUIPMENT-FAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.3 [73,130] MEMORY-FAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.4 [73,148] RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.5 [73,202] NO-Q1-CONN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.6 [73,203] LOSS-OF-ACT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
277 278 279 280 281 282 283 284 285 286 289 290 291 292 294 296 298 300 302 304 306 308 310 312 314 315 316 317 318 319 320 321 322 323 324 325 327 328 329 331 333 335 337 339 340 343 344 347 348 349 351 353 354 356
6 / 778
Contents
26
27
25.7 [73,212] LOSS-OF-CLK-8M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.8 [73,213] LOSS-OF-CLK-BOTH-8M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.9 [73,216] RESTART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.10 [73,241] SET-PROD-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.11 [73,246] DOWNLOAD-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.12 [73,247] ACCESS-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 74: BTS-ADAPT Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.1 [74,20] BLOCKED-FROM-USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.2 [74,22] LOOP-TO-EQUIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.3 [74,23] TESTMODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.4 [74,122] SYNCHRO-AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.5 [74,124] SYNC-AL-CLOCKR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.6 [74,128] EQUIPMENT-FAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.7 [74,130] MEMORY-FAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.8 [74,139] MISSING-UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.9 [74,141] FORCED-CNTRL-ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.10 [74,142] INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.11 [74,148] RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.12 [74,159] DIAG-TESTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.13 [74,202] NO-Q1-CONN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.14 [74,241] SET-PROD-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.15 [74,245] LOCAL-REINIT-REQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.16 [74,246] DOWNLOAD-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.17 [74,247] ACCESS-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 75: TCSM-ADAPT Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.1 [75,20] BLOCKED-FROM-USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.2 [75,22] LOOP-TO-EQUIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.3 [75,112] FAN-ALARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.4 [75,122] SYNCHRO-AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.5 [75,124] SYNCHRO-AL-CLOCKR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.6 [75,128] EQUIPMENT-FAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.7 [75,130] DSP-LOSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.8 [75,136] FIRST-DSP-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.9 [75,139] MISSING-UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.10 [75,141] FORCED-CNTRL-ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.11 [75,142] INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.12 [75,148] RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.13 [75,159] DIAG-TESTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.14 [75,202] NO-Q1-CONN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.15 [75,208] TRIB-TRANS-FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.16 [75,209] INT-BUS-FLT-G25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.17 [75,210] ATER-TRANS-FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.18 [75,211] LOSS-OF-CLK-2M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.19 [75,216] RESTART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.20 [75,221] TRIB-TWO-MB-MISSING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.21 [75,222] TRIB-AIS-2MB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.22 [75,223] TRIB-FRAME-ALIGNMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.23 [75,224] TRIB-CRC-MFRAME-ALGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.24 [75,225] TRIB-BER-10E-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.25 [75,226] TRIB-BER-10E-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.26 [75,227] TRIB-BER-10E-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.27 [75,228] TRIB-FAR-END-ALARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.28 [75,231] ATER-TWO-MB-MISSING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.29 [75,232] ATER-AIS-2MB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.30 [75,233] ATER-FRAME-ALIGNMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.31 [75,234] ATER-CRC-MFRAME-ALGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
358 360 362 363 364 366 367 368 370 371 372 374 376 378 380 382 383 385 386 387 389 391 393 395 397 398 399 400 401 403 405 407 409 411 413 414 416 417 418 420 422 424 426 428 429 431 433 435 436 438 440 442 444 446 448 450
7 / 778
Contents
28
29
27.32 [75,235] ATER-BER-10E-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.33 [75,236] ATER-BER-10E-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.34 [75,237] ATER-BER-10E-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.35 [75,238] ATER-FAR-END-ALARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.36 [75,241] SET-PROD-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.37 [75,245] LOCAL-REINIT-REQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.38 [75,246] DOWNLOAD-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.39 [75,247] ACCESS-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 96: PROCESS Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28.1 [96,0] RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28.2 [96,1] RESTART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28.3 [96,2] MULTIPLE-RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28.4 [96,3] ACCESS-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 97: ATCA-PROCESSOR Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.1 [97,0] RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.2 [97,1] TAKEOVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.3 [97,2] RLC-OV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.4 [97,3] ACCESS-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.5 [97,4] APPLICATION-FATAL-TERMINATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.6 [97,5] SYSTEM-FATAL-TERMINATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.7 [97,6] UNPLUGGED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.8 [97,7] FW-UPGRADE-UNSUCCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.9 [97,8] FW-UPGRADE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.10 [97,9] FIRMWARE-INCOMPATIBILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.11 [97,10] FATAL-HW-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.12 [97,11] TEMPERATURE-CRITICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.13 [97,12] TEMPERATURE-MAJOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.14 [97,14] VOLTAGE-FATAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.15 [97,15] VOLTAGE-MAJOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.16 [97,16] VOLTAGE-MINOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.17 [97,17] ETHERNET-LINK-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.18 [97,18] IPMI-FIRMWARE-NOT-UP-TO-DATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.19 [97,19] FIRMWARE-NOT-UP-TO-DATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.20 [97,20] CONFIGURATION-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.21 [97,21] TAKEOVER-REFUSED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.22 [97,22] CPU-OVERLOAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.23 [97,23] BSC-CONF-UNAVAILABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.24 [97,30] N7-DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.25 [97,31] HDLC-HANDLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.26 [97,32] Q1-HANDLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.27 [97,33] RW-HANDLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.28 [97,34] TDM-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.29 [97,35] E1-FRAMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.30 [97,36] TP-MAIN-SW-ERROR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.31 [97,37] TP-MAIN-FILE-ERROR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.32 [97,38] TP-MAIN-ACCESS-PB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.33 [97,39] SS7-SW-ERROR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.34 [97,40] CS-TEL-TEST-NOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.35 [97,50] NE1OE-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.36 [97,51] E1-SL-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.37 [97,60] TP-CAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.38 [97,61] TPIP-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.39 [97,62] CONFIG-IP-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.40 [97,63] CONFIG-IP-INPUT-ERROR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.41 [97,64] CONFIG-IP-RUNTIME-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.42 [97,65] DRIVERS-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
451 453 455 457 459 460 462 464 465 466 467 468 470 473 474 475 476 477 479 480 481 482 483 484 485 486 488 490 492 494 496 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 514 515 516 518 519 520 521 522 523 524
8 / 778
Contents
30
31
32
29.43 [97,66] HW-DIAGNOSIS-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.44 [97,67] INTER-TP-ACCESS-PB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 98: ATCA-SWITCH Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.1 [98,0] RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.2 [98,3] ACCESS-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.3 [98,6] UNPLUGGED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.4 [98,7] FW-UPGRADE-UNSUCCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.5 [98,8] FW-UPGRADE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.6 [98,9] FIRMWARE-INCOMPATIBILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.7 [98,10] FATAL-HW-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.8 [98,11] TEMPERATURE-FATAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.9 [98,12] TEMPERATURE-MAJOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.10 [98,13] TEMPERATURE-MINOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.11 [98,14] VOLTAGE-FATAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.12 [98,15] VOLTAGE-MAJOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.13 [98,16] VOLTAGE-MINOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.14 [98,18] IP-ROUTER-LINK-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.15 [98,19] TELECOM-LINK-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.16 [98,20] OAM-LINK-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.17 [98,21] FIRMWARE-NOT-UP-TO-DATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.18 [98,22] IP-CONFIG-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.19 [98,23] ASIG-OVER-IP-LINK-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.20 [98,24] BSS-OVER-IP-LINK-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 99: ATCA-SHELF Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.1 [99,0] RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.2 [99,3] ACCESS-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.3 [99,6] UNPLUGGED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.4 [99,7] FW-UPGRADE-UNSUCCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.5 [99,8] FW-UPGRADE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.6 [99,9] FIRMWARE-INCOMPATIBILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.7 [99,10] FATAL-HW-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.8 [99,11] TEMPERATURE-FATAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.9 [99,12] TEMPERATURE-MAJOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.10 [99,13] TEMPERATURE-MINOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.11 [99,14] VOLTAGE-FATAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.12 [99,15] VOLTAGE-MAJOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.13 [99,16] VOLTAGE-MINOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.14 [99,17] ETHERNET-LINK-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.15 [99,18] SHELF-MANAGER-ACCESS-PB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.16 [99,19] FAN-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.17 [99,20] FIRMWARE-NOT-UP-TO-DATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.18 [99,21] IPMI-BUS-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 100: LIU-SHELF Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.1 [100,0] RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.2 [100,1] MUX-TAKEOVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.3 [100,4] ACCESS-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.4 [100,6] UNPLUGGED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.5 [100,7] FW-UPGRADE-UNSUCCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.6 [100,8] FW-UPGRADE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.7 [100,9] FIRMWARE-INCOMPATIBILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.8 [100,19] FIRMWARE-NOT-UP-TO-DATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.9 [100,20] LIU_SHELF_PEM_OWN_VBAT_LOSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.10 [100,21] LIU_SHELF_RED_VBAT_LOSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.11 [100,22] PEM_OWN_12V_FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.12 [100,23] TOO_HIGH_TEMPERATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.13 [100,24] PEM_NOT_RESPONDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
525 526 527 528 529 530 531 532 533 535 538 540 542 544 546 548 550 552 554 556 557 559 561 563 564 565 566 567 568 569 571 573 575 577 579 581 582 583 585 586 587 588 591 592 593 594 595 596 597 598 599 600 601 602 603 605
9 / 778
Contents
33
34
35
32.14 [100,50] NE1OE-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.15 [100,51] E1-SL-FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 101: BSC-TRANS Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.1 [101,0] LIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.2 [101,1] AIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.3 [101,2] LFA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.4 [101,4] BER-10E-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.5 [101,5] RAI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.6 [101,6] BER-10E-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.7 [101,7] BER-10E-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.8 [101,8] FRAME-SLIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.9 [101,9] PPP-LNK-LOOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.10 [101,10] PPP-NO-HDLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.11 [101,11] PPP-NO-LCP-REP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.12 [101,12] PPP-CONF-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.13 [101,13] PPP-HIGH-ERR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.14 [101,14] OML-MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.15 [101,20] SFP-UNEQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.16 [101,21] LOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.17 [101,22] LOF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.18 [101,23] MS-AIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.19 [101,24] MS-RDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.20 [101,25] MS-BER-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.21 [101,26] MS-BER-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.22 [101,28] SFP-NOT-SUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.23 [101,31] AU-LOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.24 [101,32] AU-AIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.25 [101,41] HP-UNEQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.26 [101,42] HP-PLM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.27 [101,43] HP-RDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.28 [101,44] HP-LOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.29 [101,51] TU-LOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.30 [101,52] TU-AIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.31 [101,55] LP-UNEQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.32 [101,56] LP-PLM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.33 [101,57] LP-RDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.34 [101,60] PPP-CROSS-CON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.35 [101,61] PPP-LCP-TER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.36 [101,62] PPP-LOW-ERR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.37 [101,63] PPP-MED-ERR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.38 [101,100] STM1-TAKEOVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 104: TC-OM Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34.1 [104,0] TC-INIT-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34.2 [104,1] TC-INIT-SUCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 105: TRANSCODER Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.1 [105,0] POWER-SUPPLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.2 [105,128] EQUIPMENT-FAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.3 [105,130] DSP LOSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.4 [105,136] FIRST-DSP-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.5 [105,148] RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.6 [105,210] TRANS-FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.7 [105,211] LOSS-OF-CLK-2M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.8 [105,216] RESTART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.9 [105,238] ACTIVE-HSI-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.10 [105,239] REDUNDANT-HSI-FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
607 609 611 612 614 616 618 620 622 624 626 628 630 631 632 633 635 637 638 640 642 643 644 645 647 648 650 651 652 654 655 657 659 660 662 664 665 666 667 668 669 671 672 673 675 676 677 679 681 683 684 686 687 688 690
10 / 778
Contents
36
37
BSC/TC Alarm Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36.1 Restart and Software Anomaly Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36.2 Reset and Software Anomaly Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36.3 System Support Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36.4 Other BSC Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36.5 TC Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36.6 BTS Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Consequences of an SBL State Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.1 9120 BSC SBLs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.2 9130 BSC Evolution SBLs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
693 694 710 711 711 756 763 765 766 773
11 / 778
Figures
Figures
Figure 1: Graphical Flowchart for Corrective Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Figure 2: SWITCH-FAIL: Corrective Actions for Write Violation Overflow, Loss of Sync Overflow and Init Fail Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256 Figure 3: SWITCH-FAIL: Corrective Actions for Loss of Sync Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257 Figure 4: SWITCH-FAIL: Corrective Actions for HW Fault Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
12 / 778
Tables
Tables
Table 1: Event Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Table 2: Alarm Severity Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Table 3: Alarm Definition: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Table 4: Mapping of MO Perceived Severity to LMT Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Table 5: Additional Information for Restart and Software Anomaly Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 694 Table 6: FMM-IDs in Bytes 4 and 5 for Restart Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 704 Table 7: Error Types in Bytes 10 and 11 for Restart Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 709 Table 8: Additional Information for Reset and Software Anomaly Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 710 Table 9: System Support Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 711 Table 10: Additional Information for Alarm [33,3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 711 Table 11: Additional Information for Alarms [34,0] to [34,2] and [34,4] to [34,6] . . . . . . . . . . . . . . . . . . . . . . . . 711 Table 12: Additional Information for Alarm [34,3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 713 Table 13: Test Segment Results for Alarm [34,3], [51,1] (Byte 0) and [51,2] (One Byte Only) . . . . . . . . . . . 714 Table 14: Test Fault Type for Alarm [34,3], [51,1] (Byte 1) and [51,2] (One Byte Only) . . . . . . . . . . . . . . . . . 718 Table 15: TDM Connection Test Results (Bytes 6 to 21) for Alarm [34,3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 718 Table 16: Additional Information for Alarm [34,7] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 718 Table 17: Additional Information for Alarm [35,0] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 719 Table 18: Additional Information for Alarm [35,2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 720 Table 19: Additional Information for Alarm [35,3], Layout 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 721 Table 20: Additional Information for Alarm [35,3], Layout 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 721 Table 21: Example of Additional Information for Alarm [35,3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 721 Table 22: Additional Information for Alarm [35,4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 722 Table 23: Additional Information for Alarm [36,14] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 722 Table 24: Additional Information for Alarm [36,15] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 722 Table 25: Additional Information for Alarm [38,0] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 723 Table 26: Additional Information for Alarm [38,2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 723 Table 27: Additional information for Alarm [42,3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 723 Table 28: Additional Information for Alarm [42,5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 725 Table 29: Additional Information for Alarm [42,6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 726 Table 30: Additional Information for Alarm [42,9] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 727 Table 31: Additional Information for Alarm [42,12] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 727 Table 32: Additional Information for Alarm [42,13] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 729 Table 33: Additional Information for Alarms [43,0] to [43,3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 730 Table 34: Additional Information for Alarm [43,4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 732 Table 35: Additional Information for Alarms [44,0], [44,5] and [44,6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 732 Table 36: Additional Information for Alarm [44,3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 733 Table 37: Additional Information for Alarms [46, 0], [46,1] and [46,3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 733 Table 38: Additional Information for Alarm [47,9] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 733 Table 39: Additional Information for Alarm [49,0] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 734
13 / 778
Tables
Table 40: Additional Information for Alarm [49,1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 734 Table 41: Additional Information for Alarms [49,2] and [49,3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 735 Table 42: Additional Information for Alarm [51,0] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 735 Table 43: Additional Information for Alarm [51,1] - First Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 736 Table 44: Additional Information for Alarm [51,1] - Subsequent Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 737 Table 45: TDM Test Result Byte Descriptions for Alarm [51,1] and [51,2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 738 Table 46: Detailed TDM Test Results for Alarm [51,1] and [51,2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 738 Table 47: Additional Information for Alarm [51,2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 739 Table 48: Example for an Unsuccessful Test Results Format for Link/Switch . . . . . . . . . . . . . . . . . . . . . . . . . . 739 Table 49: Relationship IAD/NA to RIT and Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 752 Table 50: Additional Information for Alarm [51,3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 753 Table 51: Additional Information for Alarms [52,1], [52,5] and [52,7] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 754 Table 52: Additional Information for Alarms [53,0], [53,1], [53,3], [53,4], [53,6] and [53,7] . . . . . . . . . . . . . . 754 Table 53: Additional Information for Alarm [53,2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 754 Table 54: Additional Information for Alarms [53,5] and [53,8] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 755 Table 55: Additional Information for Alarm [101,8] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 755 Table 56: Additional Information for Alarm [70,219] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 756 Table 57: Additional Information for Alarm [73,022] to [73,216] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 756 Table 58: Additional Information for Alarm [75,20] to [75,247] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 757 Table 59: MT120 Board - Equipment Reset/Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 758 Table 60: MT120 Board, Range >80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 758 Table 61: MT120 Board, Error Types, Range <80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 759 Table 62: MT120 board, Error Types, Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 762 Table 63: Additional Information for Alarm [74,20] to [74,202] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 763
14 / 778
Preface
Preface
Purpose
The purpose of the alarm dictionary is to provide the operator with a structured method for handling alarm messages generated by the BSC and the TC. This document contains a list of all BSC and TC alarms, and the actions required to nullify them. Alarms are displayed at the OMC-R terminal and at the LMT to inform the operator of system faults.
When a fault occurs, a number of alarms can be generated simultaneously. These alarms must be analyzed as a group to determine the precise fault. This document applies to release B11 of the BSS. This document contains IP transport in the BSS related information. This feature is available commercially from Release B11 MR2.
Whats New
In Edition 16
Section [101,8] (Section 36.4.37) was added.
In Edition 15
The alarm [97,18] IPMI-FIRMWARE-NOT-UP-TO-DATE (Section 29.18) was added.
In Edition 14
Description improvement for alarm [97,1] TAKEOVER (Section 29.2). Alarm [97,67] INTER-TP-ACCESS-PB (Section 29.44) was added. Corrective action improvement for alarm [99,10] FATAL-HW-FAILURE (Section 31.7). System impact was updated for alarms: [35,4] ASL-REP (Section 4.4) [35,5] RMH-REP (Section 4.5) [42,16] MSC-TRAFFIC-REDUCTION (Section 8.10) [43,6] TRX-MAPPING-CHANGE (Section 9.7) [47,28] TRAU-CP-DOUBLE-DECLARED (Section 13.26)
15 / 778
Preface
[104,0] TC-INIT-FAIL (Section 34.1) [104,1] TC-INIT-SUCC (Section 34.2). Applicability was updated for alarms: [47,26] TRAU-CP-OUT-OF-RANGE (Section 13.24) [47,27] TRAU-CP-ON-DEDICATED-ATER (Section 13.25) [47,28] TRAU-CP-DOUBLE-DECLARED (Section 13.26) [47,200] N7-CONF-FAILURE (Section 13.31) [51,3] GLOBAL-ROUTINE-TEST-REP (Section 17.4) Class 101: BSC-TRANS Alarms (Section 33) [104,0] TC-INIT-FAIL (Section 34.1) [104,1] TC-INIT-SUCC (Section 34.2). Impact table was updated for alarms: [47,19] DLS-RESTORATION (Section 13.17) [48,0] AUDIT-FAIL (Section 14.1) [48,1] PROTOCOL-FAIL (Section 14.2) Class 50: BSC EXTERNAL Alarms (Section 16) Class 73: BSC-ADAPT Alarms (Section 25) [96,3] ACCESS-FAIL (Section 28.4) [99,9] FIRMWARE-INCOMPATIBILITY (Section 31.6) [100,50] NE1OE-FAILURE (Section 32.14).
In Edition 13
Section BTS Alarms (Section 36.6) was created.
In Edition 12
The following have been added: [98,21] FIRMWARE-NOT-UP-TO-DATE (Section 30.17) [99,20] FIRMWARE-NOT-UP-TO-DATE (Section 31.17). The following have been updated: [97,9] FIRMWARE-INCOMPATIBILITY (Section 29.10) [97,19] FIRMWARE-NOT-UP-TO-DATE (Section 29.19) [98,9] FIRMWARE-INCOMPATIBILITY (Section 30.6) [99,9] FIRMWARE-INCOMPATIBILITY (Section 31.6) [100,9] FIRMWARE-INCOMPATIBILITY (Section 32.7) [100,19] FIRMWARE-NOT-UP-TO-DATE (Section 32.8).
In Edition 11
Description improvement for alarm [98,10] FATAL-HW-FAILURE (Section 30.7). Applicability was updated for alarm [46,1] UNSYNC-OTHER-CORR (Section 12.2).
16 / 778
Preface
Corrective action was updated for alarms: [35,6] MSC-REP (Section 4.6) [43,3] LOSS-OF-ALL-CHAN (Section 9.4) [44,1] PROTOCOL-FAIL (Section 10.2).
In Edition 10
Alarm description was updated for alarm [42,2] OVERLOAD-MSC (Section 8.2). Severity was updated for alarm [35,6] MSC-REP (Section 4.6). Impacted SBL was updated for STM1 related alarms in Class 101: BSC-TRANS Alarms (Section 33).
In Edition 09
Alarm [43,6] TRX-MAPPING-CHANGE (Section 9.7) was added. Alarm severity was changed for alarms: [35,6] MSC-REP (Section 4.6) [42,16] MSC-TRAFFIC-REDUCTION (Section 8.10). Description improvement for alarms: [43,0] LOSS-OF-BCCH (Section 9.1) [43,1] LOSS-OF-SDCCH (Section 9.2) [43,2] LOSS-OF-TCH (Section 9.3) [47,40] CS-TEL-TEST-NOK (Section 13.28) [47,41] PS-TEL-TEST-NOK (Section 13.29) [97,23] BSC-CONF-UNAVAILABLE (Section 29.23) [97,40] CS-TEL-TEST-NOK (Section 29.34) [97,65] DRIVERS-FAILURE (Section 29.42) [97,66] HW-DIAGNOSIS-FAILURE (Section 29.43) [98,24] BSS-OVER-IP-LINK-FAIL (Section 30.20).
In Edition 08
The following alarms have been added: [47,103] BTS-TC-RESHUFFLING-FAIL (Section 13.30) [99,21] IPMI-BUS-FAIL (Section 31.18). [101,14] OML-MODE (Section 33.14) [101,41] HP-UNEQ (Section 33.25). Description improvement for alarms: [97,65] DRIVERS-FAILURE (Section 29.42) [97,66] HW-DIAGNOSIS-FAILURE (Section 29.43) [98,11] TEMPERATURE-FATAL (Section 30.8) [99,11] TEMPERATURE-FATAL (Section 31.8). Section Overview was updated with the commercial name for the TCIF/TCIFI boards.
17 / 778
Preface
In Edition 07
The following alarms have been added: [47,40] CS-TEL-TEST-NOK (Section 13.28) [47,41] PS-TEL-TEST-NOK (Section 13.29) [97,23] BSC-CONF-UNAVAILABLE (Section 29.23) [97,40] CS-TEL-TEST-NOK (Section 29.34) [98,22] IP-CONFIG-FAIL (Section 30.18) [98,23] ASIG-OVER-IP-LINK-FAIL (Section 30.19) [98,24] BSS-OVER-IP-LINK-FAIL (Section 30.20). Improvements have been made in: [71,0] POWER-SUPPLY (Section 24.1) [97,17] ETHERNET-LINK-FAILURE (Section 29.17)
In Edition 06
Alarm Description have been improved for [42,14] GPRS-RESET (Section 8.8).
In Edition 05
Corrective Action have been improved for the following alarms: [42,12] TEL-PAIR-LOST (Section 8.6) [42,15] TCH-RM-FAULT (Section 8.9) [47,22] NTP-DRIFT-TIME-EXCEEDED (Section 13.20) [52,1] LOSS-OF-CLK-GEN-FN (Section 18.2) [98,3] ACCESS-FAIL (Section 30.2) [99,3] ACCESS-FAIL (Section 31.2) Corrective action from alarm [35,7] MSC_DEGRADE (Section 4.7) had been updated.
In Edition 04
Improvement done in [101,25] MS-BER-6 (Section 33.20).
In Edition 03
Description improvement for: [35,4] ASL-REP (Section 4.4) [35,5] RMH-REP (Section 4.5) [42,12] TEL-PAIR-LOST (Section 8.6) [42,15] TCH-RM-FAULT (Section 8.9) [47,22] NTP-DRIFT-TIME-EXCEEDED (Section 13.20) [52,1] LOSS-OF-CLK-GEN-FN (Section 18.2) [98,3] ACCESS-FAIL (Section 30.2) [99,3] ACCESS-FAIL (Section 31.2)
18 / 778
Preface
In Edition 02
Corrective action have been added for the following alarms: [101,10] PPP-NO-HDLC (Section 33.10) [101,11] PPP-NO-LCP-REP (Section 33.11) [101,12] PPP-CONF-FAIL (Section 33.12) [101,20] SFP-UNEQ (Section 33.15) [101,21] LOS (Section 33.16) [101,22] LOF (Section 33.17) [101,23] MS-AIS (Section 33.18) [101,24] MS-RDI (Section 33.19) [101,25] MS-BER-6 (Section 33.20) [101,26] MS-BER-3 (Section 33.21) [101,28] SFP-NOT-SUP (Section 33.22) [101,31] AU-LOP (Section 33.23) [101,32] AU-AIS (Section 33.24) [101,42] HP-PLM (Section 33.26) [101,43] HP-RDI (Section 33.27) [101,44] HP-LOM (Section 33.28) [101,51] TU-LOP (Section 33.29) [101,52] TU-AIS (Section 33.30) [101,55] LP-UNEQ (Section 33.31) [101,56] LP-PLM (Section 33.32) [101,57] LP-RDI (Section 33.33) [101,60] PPP-CROSS-CON (Section 33.34) [101,61] PPP-LCP-TER (Section 33.35) [101,62] PPP-LOW-ERR (Section 33.36) [101,63] PPP-MED-ERR (Section 33.37) [101,100] STM1-TAKEOVER (Section 33.38)
In Edition 01
Update due to feature NEW ALMAP FM MODULE REPLACEMENT AS. First release of the document.
19 / 778
Preface
This document is aimed at telecommunications operators responsible for performing O&M fault handling and troubleshooting tasks. The operator must be familiar with the following: Alcatel O&M concepts for the BSS MO scenario Fault management Use of OMC-R and BSC terminals SBL hierarchies of the BTS, BSC and TC Telecommunications techniques including line transmission and switching.
20 / 778
1 Introduction
1 Introduction
This section describes the structure of alarm messages.
21 / 778
1 Introduction
1.1 Overview
This alarm dictionary provides additional information that is not displayed in the alarm messages sent to the OMC-R, BSC or TC terminals. The dictionary contains alarm definitions for each alarm type produced by the BSS. Each definition describes the: Alarm definition Alarm description Impact on System Methods for further fault isolation Corrective actions.
Note:
The following convention applies for a 9125 TC equipped with a TC STM1 IP subrack: TC STM1 interface board is also referred as TCIF TC STM1 IP interface board is also referred as TCIFI.
22 / 778
1 Introduction
Indicates... a serious fault condition which requires immediate correction. Example: a managed object goes out of service. a fault condition which requires urgent corrective action. Example: severe degradation in the operation of a managed object. a fault condition which does not affect service but corrective action should be taken to avoid a more serious fault. detection of a potential fault condition. Action should be taken to diagnose and correct the problem to avoid a more serious fault condition. the severity level cannot be defined by the resource which raised the alarm. the alarm was cleared by the resource which raised the alarm.
Major
Minor
Warning
In addition to the Object Identification and Alarm Type information, all alarms always give the date and time of the alarm. An alarm may also contain optional information, such as the notification id. Refer to the AS on-line help for more detailed information on AS.
23 / 778
1 Introduction
1.3.3 Location
The origin of the alarm, consisting of: Network element - the BSS identity Unit type: bts bsc tcsm bie tsc bss. Unit number: 0 or 1 for a tcsm 0 to 40 for a bie 1 for a bsc, tsc or bss 1 to 40 for a bts. SBL type SBL number and subnumber, if appropriate. For example, RTS (3, 4) is RTS number 4 of FU3 (the parent SBL).
24 / 778
1 Introduction
1.3.4 Classification
The characteristics of the alarm, consisting of: Alarm Class name and number - as shown in the Contents list of the Alarm Dictionary Alarm Type name and number - as shown in the Contents list of the Alarm Dictionary Alarm Number - dependent on the Alarm Class and Type. See the appropriate dictionary entry for the valid alarm numbers for a particular alarm Alarm Condition - has one of the following values: begin - alarm on. For fatal failures, the affected SBL changes state to FLT or FOS. For non-fatal failures, the affected SBL changes state to FIT end - alarm off. Indicates the successful recovery of the system. The affected SBL may not change state if other alarms related to the SBL are on event - occurrence of anomaly. No action is required unless it occurs frequently. Event alarms are of short duration and the affected SBL does not change state. The system retry/recovery mechanism has cleared the fault. If a fatal alarm occurs and the affected SBL changes state to FOS, the system isolates the faulty equipment if it cannot be initialized. After a repair action, the operator normally initializes the equipment. If a fatal alarm occurs and the affected SBL changes state to FLT, the system resets the faulty equipment. When the alarm ceases, the system automatically initializes the equipment. If a non-fatal alarm or event occurs, the affected SBLs are put into the FIT state. In the worst situation, the equipment operates in a degraded mode.
25 / 778
1 Introduction
26 / 778
1 Introduction
1.4.3.2 eventType
The eventType attribute identifies the basic type of the alarm. Table 1 describes the event Types.
1.4.3.3 specificProblems
The specificProblems provides the alarm class name.
1.4.3.4 probableCause
This attribute provides additional information as to the probable cause of the alarm. Its value belongs to a set of possible values either defined in recommendation X.721 (for those that have a wide applicability) or defined for a particular TMN project.
27 / 778
1 Introduction
1.4.3.5 perceivedSeverity
This attribute gives the severity level of the alarm. Table 2 describes the severity level. The table below provides a mapping between the severity level shown in AS and at the LMT. MO Severity Critical Major Minor Warning LMT Category VPMA, SA PMA DMA MI
28 / 778
1 Introduction
29 / 778
1 Introduction
[32,0] CONV
Onsite
Onsite
no
Onsite
End Field
Figure 1: Graphical Flowchart for Corrective Actions If the additional information is not decoded, it is displayed as pairs of hexadecimal digits as described in BSC/TC Alarm Additional Information (Section 36). At the BSC terminal, the additional information consists of numbers in the range 0 to 255. Each number represents the contents of one pair of digits. Decoding Additional Information from Alarms Decoding BSC additional information must only be attempted by Alcatel system support personnel. If a fault persists after corrective actions have been taken, send a copy of the alarm message containing the additional information to the Alcatel System Support office.
30 / 778
31 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
32 / 778
Onsite
Onsite
Converter operational?
yes
Alarm solved
no
Onsite
Converter operational?
yes
Alarm solved
33 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
34 / 778
Onsite
Onsite
Replace SYSCPRC
Battery operational?
yes
Alarm solved
no
35 / 778
36 / 778
37 / 778
38 / 778
9120 BSC In case of CPR: The SBL state remains unchanged. The operating system and all FMM are sequentially re-initialized. S-CPR - Simplex: SDCCH allocation is not possible for some seconds. New telecommunication transactions fail. There is no impact on current calls. Standby S-CPR - Duplex Telecom functions are not affected. If BSC or BTS processors are being loaded by the standby CPR, loading is stopped and then resumed when the restart is complete. Active S-CPR - Duplex: A takeover occurs if the standby CPR and its disk are IT; the standby CPR now becomes active. SDCCH allocation is not possible for some seconds. New telecommunication transactions fail. Communication with the OMC-R is lost for some seconds. OSI-CPR - Simplex: Telecom functions are not affected. If the restart happens at a five minute boundary and the CPR has to carry out PM activities, the restart can cause some problems with file production (such as, loss of last five minute contribution and missing files). Standby OSI-CPR - Duplex: The standby CPR is restarted. If the restarted processor is an OSI-CPR that manages the OSI communications with the OMC-R, some file transfers may be interrupted. If this happens, the OMC-R requests the information again. Active OSI-CPR - Duplex: Telecom functions are not affected. If the active OSI-CPR is restarted, and the standby OSI-CPR and its disk are IT, the standby immediately takes over its functions and becomes active. If the restart happens at a five minute boundary and the CPR has to carry out PM activities, the restart can cause some problems with file production (such as, loss of last five minute contribution, missing files). If the restarted processor is an OSI-CPR that manages the OSI communications with the OMC-R, some file transfers may be interrupted. If this happens, the OMC-R requests the information again. In case of DTC: The SBL state remains unchanged. All stable calls assigned on TCHs remain unaffected. Some Signaling messages can be lost. This can affect some transactions in progress. In case of TCU: The SBL state remains unchanged. All stable calls are unaffected. Some Signaling messages can be lost, which can affect some transactions in progress. Call setup in SDCCH phase/handover fails. In case of TSC: The SBL state remains unchanged. All stable calls are unaffected. Some Signaling messages can be lost, which can affect some transactions in progress. Call setup in SDCCH phase/handover fails. Note: For every processor restart, an attempt has been made to minimize the impact on the system. Recovery after a processor restart depends on the action taken. The following corrections are performed by the system: * Restart the action * Resume the action * Initiate an audit * Terminate the action.
39 / 778
Cell/BTS(s) No No
40 / 778
41 / 778
9120 BSC The SBL state remains unchanged. In case of CPR: The impact depends on the type of CPR. * S-CPR - Simplex: SDCCH/TCH allocation is not possible for some minutes. New and existing telecommunication transactions fail. * Standby S-CPR - Duplex: Telecom functions are not affected. * Active S-CPR - Duplex: A takeover occurs if the standby CPR and its disk are IT; the standby CPR now becomes active. SDCCH allocation is not possible for some seconds. New and existing telecommunication transactions fail. Communication with the OMC-R is lost for some seconds. If there is an autonomous reboot of one S-CPR and a restart of the other CPR, the whole system can crash. * OSI-CPR - Simplex: Telecom functions are not affected. * Standby OSI-CPR - Duplex: If the OSI-CPR is handling the X.25 link to the OMC-R, communication with the OMC-R is lost for some seconds. If the reset/reload (reboot) processor is an OSI-CPR that manages the OSI communication with the OMC-R, some file transfers may be interrupted. If this happens, the OMC-R requests the information again. * Active OSI-CPR - Duplex: Telecom functions are not affected. If the master performs a Reset, the standby immediately takes over its functions. If the reset happens at a five minute boundary, there may be problems with production of PM files. In case if DTC: All calls managed by the processor are lost. In case of TCU: All calls managed by the processor are lost. In case of TSC: All transmission Signaling and downloading managed by the processor are lost.
For every processor reset/reload (reboot), an attempt has been made to minimize the impact on the system. Recovery after a processor reset depends on the action taken. The following corrections are performed by the system: *Reset * Resume the action * Initiate an audit * Terminate the action.
42 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
43 / 778
44 / 778
Impact Loss
Cell/BTS(s) Yes (if CPR, DTC or TCU) Yes (if TCU and cells have TRX mapped on other TCU)
Degradation
No
yes
no
MO is Unlocked/ enabled?
yes
no
Onsite
Replace CPR/DTC/TCU/TSC
Access operational?
yes
Alarm solved
no
45 / 778
46 / 778
Impact Loss
Degradation
No
Yes (if TCU and cells have TRX mapped on other TCU)
Alarm solved
no
Alarm persists?
yes
Onsite
Replace CPR/DTC/TCU/TSC
Alarm solved
no
Alarm persists?
47 / 778
Impact Loss
Trunk(s) No
O&M; Capabilities No
Degradation
No
48 / 778
Lock CPR/DTC
Test CPR/DTC
Verify CPR/DTC
Unlock CPR/DTC
Alarm solved
no
Alarm persists?
49 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No Yes
O&M; Capabilities No No
Remap the RSL to spread the load of SDCCH among other TCUs (flatten hot spots).
Alarm solved
no
Alarm persists?
50 / 778
51 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
52 / 778
yes
no There is a lack of synchronization of the 2 MBit/s signals arriving at the BSC. or The transmission board settings are incorrect. or A high error rate on the transmission lines forced the use of the transmission modules internal clock.
yes
no
Onsite
Alarm solved
Onsite
no
Alarm persists?
no
yes
yes
Onsite Onsite
no
yes
Alarm persists?
yes
no Alarm solved
53 / 778
Applicability
See Consequences of an SBL State Change. When the RTE-REP alarm is ON, the communication with the MSC is lost, there is no more possible traffic, the BSC bars automatically all the cells. When the RTE-REP alarm is OFF, the BSC unbars the cell:- either step by step (by group of access classes)- or in one shot, depending on the parameter T18.
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling No No
Call Handling No No
O&M; Capabilities No No
54 / 778
yes
no
Alarm solved
no
Alarm persists?
yes
no
Alarm persists?
55 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
56 / 778
no
yes
Onsite
Replace DTC
Alarm solved
no
Alarm persists?
yes
57 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No Yes
Call Handling No No
O&M; Capabilities No No
58 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
59 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
Alarm persists?
no
no
yes
no Solve IP issues
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
60 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No Yes
O&M; Capabilities No No
61 / 778
no
no
Alarm solved
yes
Alarm persists?
no
yes
62 / 778
63 / 778
Trunk(s) No Yes
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
Trigger recovery action on peer side and wait until trunk becomes available.
no
yes
Alarm solved
no
Alarm persists?
64 / 778
Applicability
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling No Yes
Call Handling No No
O&M; Capabilities No No
65 / 778
yes
no
Trigger recovery action on peer side and wait until trunk becomes available.
no
yes yes
Alarm solved
no
Alarm persists?
66 / 778
Applicability
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
67 / 778
yes
no
Trigger recovery action on peer side and wait until trunk becomes available.
no
yes no yes
Alarm solved
Alarm persists?
68 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
69 / 778
yes
no
no
yes
Alarm solved
no
Alarm persists?
yes
70 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
71 / 778
yes
no
no
yes no yes
Alarm solved
Alarm persists?
72 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
73 / 778
yes
no
Trigger recovery action on peer side and wait until trunk becomes available.
no
74 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
75 / 778
yes
no
Trigger recovery action on peer side and wait until trunk becomes available.
no
76 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
yes
no
Trigger recovery action on peer side and wait until trunk becomes available.
no
77 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
yes
no
Trigger recovery action on peer side and wait until trunk becomes available.
no
78 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
79 / 778
80 / 778
81 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
82 / 778
yes
Alarm solved
no
Alarm persists?
83 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
84 / 778
Lock X.25
Unlock X.25
Trigger recovery action on peer side and wait until X.25 link becomes available.
no
yes
Alarm persists?
no
Alarm solved
no
Alarm persists?
yes
85 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
86 / 778
Lock X.25
Unlock X.25
clear confirmation
restart confirmation
Trigger recovery action on peer side and wait until X.25 link becomes available.
no
yes
Alarm persists?
no
Alarm solved
no
Alarm persists?
yes
87 / 778
88 / 778
89 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
90 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
91 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
92 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
93 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
94 / 778
95 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
96 / 778
no
97 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No Yes
Signaling No No
O&M; Capabilities No No
98 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
99 / 778
yes
no
Alarm solved
no
Alarm persists?
100 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
101 / 778
yes
no
Alarm solved
no
Alarm persists?
102 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
yes
no
103 / 778
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling No Yes
O&M; Capabilities No No
104 / 778
9120 BSC
no
Alarm persists?
yes
yes
Onsite
Alarm solved
no
Alarm persists?
yes
105 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
106 / 778
yes
107 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No Yes
108 / 778
109 / 778
Trunk(s) YES NO
Cell/BTS(s) YES NO
Signaling YES NO
O&M; Capabilities NO NO
110 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
111 / 778
1 Alarm Type?
yes
no
Alarm solved
no
Alarm persists?
yes
112 / 778
113 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
O&M; Capabilities No No
114 / 778
yes
Alarm persists?
no
no
yes
yes
Alarm persists?
no
yes
yes
Alarm persists?
no
yes
Alarm solved
yes
Alarm persists?
no
yes
Alarm persists?
Lock / unlock RA
Alarm persists?
no
no Alarm solved
yes
Alarm persists?
no
yes
115 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No Yes
Signaling No Yes
O&M; Capabilities No No
116 / 778
yes
no no Alarm persists?
Alarm solved
117 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No Yes
Signaling No No
O&M; Capabilities No No
118 / 778
yes
Alarm persists?
no
no
yes
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
no
yes
Alarm persists?
no
no
yes
119 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling No No
120 / 778
yes
no
yes
no
yes
no
no yes OML failed? Lock/Unlock OML yes Check BTS and power supply Alarm persists? yes no
OML failed?
no
yes
Reset BTS
no
Alarm persists?
yes
yes
no
Alarm persists?
yes
Lock / unlock RA
Alarm persists?
no
no
Alarm solved
yes
Alarm persists?
no
121 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
122 / 778
yes
no
yes
no
yes
no
Alarm solved
no
Alarm persists?
yes
123 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
124 / 778
yes
no
yes
125 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
126 / 778
Trunk(s) No No
Cell/BTS(s) No Yes
Signaling No No
Call Handling No No
O&M; Capabilities No No
127 / 778
yes
yes
no
None
Alarm solved
no
Alarm persists?
128 / 778
129 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
130 / 778
no OML up?
yes
Alarm solved
no
Alarm persists?
131 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
132 / 778
no
yes
no
Alarm solved
Alarm persists?
no
133 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
134 / 778
no OML up?
yes
Alarm solved
no
Alarm persists?
yes
135 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
136 / 778
yes
no
Lock BTSOM
Unlock BTSOM
Alarm persists?
no
Alarm solved
no
Alarm persists?
yes
yes
yes
no
137 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
138 / 778
no
yes
Lock BTSOM
Unlock BTSOM
Alarm persists?
no
Alarm solved
no
Alarm persists?
yes
yes
139 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
140 / 778
BTS/OMU restarts?
yes
no
no
yes
yes
no
no
Lock BTSOM
Alarm solved
no
Alarm persists?
141 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
142 / 778
Lock BTSOM
Unlock BTSOM
Alarm persists?
no
Alarm solved
yes
Onsite
Alarm persists?
no
Alarm solved
143 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
Alarm solved
no
Alarm persists?
144 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
145 / 778
146 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
no
Correct characteristics
no
Alarm solved
147 / 778
148 / 778
149 / 778
Applicability
Trunk(s) No Yes
Cell/BTS(s) No No
Signaling No Yes
O&M; Capabilities No No
150 / 778
Lock ACH
Unlock ACH
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
Alarm solved
151 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No Yes
O&M; Capabilities No No
152 / 778
Lock ACH
Unlock ACH
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
Alarm solved
153 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No Yes
O&M; Capabilities No No
154 / 778
Unlock assoc. Atrunk to bring ACH back in service, as faults can exist for other Achannels on Atrunk
Alarm persists?
no
Alarm solved
155 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No Yes
O&M; Capabilities No No
156 / 778
Unlock assoc. Atrunk to bring ACH back in service, as faults can exist for other Achannels on Atrunk
Alarm persists?
no
Alarm solved
157 / 778
Applicability
Trunk(s) No Yes
Cell/BTS(s) No No
Signaling No Yes
O&M; Capabilities No No
Unlock assoc. Atrunk to bring ACH back in service, as faults can exist for other Achannels on Atrunk
Alarm persists?
no
Alarm solved
158 / 778
159 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
160 / 778
Applicability
161 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
Alarm persists?
no
Alarm solved
162 / 778
Applicability
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
163 / 778
Applicability
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
164 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
165 / 778
yes
Alarm persists?
no
Alarm solved
166 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
167 / 778
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
Alarm solved
168 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
169 / 778
Alarm persists?
no
Alarm solved
170 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
171 / 778
Alarm solved
no
Alarm persists?
yes
no
yes
Onsite
Alarm solved Replace suspected CPR
no
Alarm persists?
172 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
173 / 778
Initialize DISK
no
yes
Onsite
Alarm solved
no
Alarm persists?
174 / 778
175 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
176 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
177 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
178 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
179 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
180 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
181 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
no
Alarm solved
182 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
183 / 778
no
Alarm persists?
no
yes
yes
Alarm persists?
no
Alarm solved
yes
184 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No Yes
Signaling No Yes
Check multiplexing parameters used by this BTS. If the Abis conveys only Evolium BTS remove Q1 TS if it exists
Alarm persists?
no
Alarm solved
185 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No Yes
Signaling No Yes
Check occupancy of the TSU and make place in the TSU using one of the following methods
Decrease MaxExtraTSPrimary if there is a 2 Abis BTS and the TCU supporting the second Abis link has still free resources
Alarm cleared?
yes
Alarm solved
186 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No Yes
Signaling No Yes
187 / 778
Remove TRE
Onsite Define correct sector via CreateTRE command Equip TRE in correct sector to correspond to defined TRE via CreateTRE command
Alarm persists?
no
Alarm solved
no
Alarm persists?
yes
188 / 778
Trunk(s) No No
Cell/BTS(s) No Yes
Signaling No Yes
Reshuffle TCUs via Compact RSL/TCU remapping and Manually addon the TRE on BSC
Alarm persists?
no
Alarm solved
189 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No Yes
Signaling No Yes
190 / 778
Alarm persists?
no
Alarm solved
191 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No Yes
Signaling No Yes
192 / 778
Alarm persists?
no
Alarm solved
yes
Delete unrequired TRE data. TRE(s) must be not equipped, if autoallocate is set for the Abis
Alarm persists?
no
Alarm solved
193 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
194 / 778
no
Alarm persists?
no
yes
yes
no
Alarm persists?
no
Alarm solved
yes
yes
no
Alarm persists?
no
yes
yes
195 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
196 / 778
no
Alarm persists?
no
yes
yes
no
Alarm persists?
no
Alarm solved
yes
yes
no
Alarm persists?
no
yes
yes
197 / 778
Impact Loss
Degradation
No
198 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
199 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Alarm persists?
no
Alarm solved
no
200 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
201 / 778
Alarm persists?
no
yes
yes
no
Alarm persists?
no
Alarm solved
yes
yes
no
Alarm persists?
no
yes
202 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
203 / 778
Alarm persists?
no
yes
yes
no
Alarm persists?
no
Alarm solved
yes
yes
Alarm persists?
no
yes
204 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
205 / 778
Change the multiplexing mode of the BTS where the TREs were added
Alarm persists?
no
Alarm solved
206 / 778
Applicability
Trunk(s) NO NO
Cell/BTS(s) NO YES
Signaling NO YES
Alarm persists?
no
Alarm solved
207 / 778
Trunk(s) No NO
Cell/BTS(s) No NO
Signaling No NO
Call Handling No NO
Alarm persists?
no
Alarm solved
yes
208 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
Alarm persists?
no
Alarm solved
yes
209 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
Alarm persists?
no
Alarm solved
yes
210 / 778
Trunk(s) No NO
Cell/BTS(s) No NO
Signaling No NO
Call Handling No NO
O&M; Capabilities NO NO
Alarm persists?
no
Alarm solved
yes
211 / 778
Trunk(s) YES NO
Cell/BTS(s) YES NO
Signaling YES NO
O&M; Capabilities NO NO
Alarm persists?
no
Alarm solved
212 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
Alarm persists?
no
Alarm solved
213 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
214 / 778
Alarm persists?
no
yes
Reinitialize GPRS.
Alarm solved
Alarm persists?
no
yes
215 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
Alarm persists?
no
Alarm solved
yes
216 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling Yes(Ater) No
O&M; Capabilities No No
Alarm persists?
no
Alarm solved
yes
217 / 778
218 / 778
219 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
Reset TSC
Alarm persists?
no
Alarm solved
220 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
Reset TSC
Alarm solved
no
Alarm persists?
221 / 778
222 / 778
223 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
224 / 778
yes
no
Alarm persists?
no
Alarm solved
yes
yes
no no
Alarm persists?
Alarm solved
225 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
226 / 778
yes
227 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
yes
228 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
yes
229 / 778
230 / 778
231 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
232 / 778
Onsite
yes
Onsite
Trigger customer specific action according to reported alarm (e.g. call fire brigade)
Onsite
no
Alarm solved
233 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
234 / 778
Onsite
yes
Onsite
Trigger customerspecific action according to reported alarm (e.g. call fire brigade)
Onsite
no
Alarm solved
235 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
236 / 778
Onsite
yes
Onsite
Trigger customerspecific action according to reported alarm (e.g. call fire brigade)
Onsite
no
Alarm solved
237 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
238 / 778
Onsite
yes
Onsite
Trigger customerspecific action according to reported alarm (e.g. call fire brigade)
Onsite
no
Alarm solved
239 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
240 / 778
Onsite
yes
no
Onsite
Trigger customerspecific action according to reported alarm (e.g. call fire brigade)
Onsite
no
Alarm solved
241 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
242 / 778
Onsite
yes
no
Onsite
Trigger customerspecific action according to reported alarm (e.g. call fire brigade)
Onsite
no
Alarm solved
243 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
244 / 778
Onsite
yes
no
Onsite
Trigger customerspecific action according to reported alarm (e.g. call fire brigade)
Onsite
no
Alarm solved
245 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
246 / 778
Onsite
yes
Onsite
Trigger customerspecific action according to reported alarm (e.g. call fire brigade)
Onsite
no
Alarm solved
247 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
248 / 778
Onsite
yes
Onsite
Trigger customerspecific action according to reported alarm (e.g. call fire brigade)
Onsite
no
Alarm solved
249 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
250 / 778
Onsite
yes
Onsite
Trigger customerspecific action according to reported alarm (e.g. call fire brigade)
Onsite
no
Alarm solved
251 / 778
252 / 778
253 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
yes
Alarm persists?
no
Alarm solved
yes
254 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
255 / 778
Two alarms are generated for a link, one alarm for each affected switch.
Alarm persists?
no
Alarm solved
Figure 2: SWITCH-FAIL: Corrective Actions for Write Violation Overflow, Loss of Sync Overflow and Init Fail Alarms
256 / 778
no
no
MSC/trunk provides clock pulse to BSC? yes Onsite Check cabling to switch, replace cabling if required.
no
Two alarms are generated for a link, one alarm for each affected switch.
Alarm persists?
no
Alarm solved
257 / 778
Two alarms are generated for a link, one alarm for each affected switch.
Switch operational?
yes
Alarm solved
no
Onsite
Alarm persists?
no
Alarm solved
258 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
259 / 778
Onsite
Onsite
no
yes
Onsite
no
260 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
261 / 778
yes
no
Alarm persists?
no
Alarm solved
262 / 778
263 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
264 / 778
yes
no
yes
no
no
Alarm persists?
yes
Onsite
Alarm solved
no
Alarm persists?
265 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
Alarm persists?
no
Alarm persists?
no
yes
266 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
267 / 778
yes
yes
no
Alarm persists?
no
Alarm solved
268 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
Onsite
Alarm persists?
no
Alarm solved
269 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
Onsite
Alarm persists?
no
Alarm solved
270 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
Onsite
Alarm solved
no
Alarm persists?
yes
271 / 778
Impact Loss
Trunk(s)
O&M; Capabilities
Degradation
272 / 778
yes
yes
no
Alarm solved
no
Alarm persists?
yes
273 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
Onsite
Alarm solved
no
Alarm persists?
274 / 778
275 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
Onsite
Replace suspected RIT
Alarm solved
no
Alarm persists?
276 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Onsite
G2: Replace both BCLASYS boards
Alarm solved
no
Alarm persists?
277 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
yes
no
Onsite
Alarm solved
no
Alarm persists?
yes
278 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
Onsite
Alarm solved
no
Alarm persists?
yes
279 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Onsite
G2: Replace both BCLA boards
Alarm solved
no
Alarm persists?
yes
280 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
Onsite
Alarm solved
no
Alarm persists?
yes
281 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
Onsite
Replace cabling to suspected RIT
Alarm solved
no
Alarm persists?
282 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Onsite
Replace suspected RIT
Alarm solved
no
Alarm persists?
283 / 778
Trunk(s)
Cell/BTS(s)
Signaling
yes
no
Onsite
G2: Replace suspected broadcast bus RIT
Alarm solved
no
Alarm persists?
yes
284 / 778
285 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No Yes
Signaling No No
Call Handling No No
O&M; Capabilities No No
286 / 778
287 / 778
288 / 778
289 / 778
Applicability
Impact Loss
Trunk(s)
Cell/BTS(s)
Signaling
Degradation
No
No
Remove the loopback settings, though normal conditions return after a preset control timeout.
Alarm solved
no
Alarm persists?
290 / 778
Applicability
Impact Loss
Trunk(s)
Cell/BTS(s)
Signaling
Degradation
No
No
Remove the loopback settings, though normal conditions return after a preset control timeout.
Alarm solved
no
Alarm persists?
291 / 778
Applicability
Impact Loss
Trunk(s)
Cell/BTS(s)
Signaling
Degradation
No
No
292 / 778
no
no
yes
Alarm persists?
no
no
Receiver operational?
yes
Onsite Repair/replace Receiver no Local trunk cabling OK? yes Trigger remote signal path and transmitter tests on MSC side
Alarm persists?
no
Alarm solved
293 / 778
Impact Loss
Trunk(s)
Cell/BTS(s)
Signaling
Degradation
No
No
294 / 778
no
Loop activated?
no
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
Alarm solved
295 / 778
Applicability
Impact Loss
Trunk(s)
Cell/BTS(s)
Signaling
Degradation
No
No
296 / 778
no
yes yes Trigger remote signal path and transmitter tests on MSC side
Alarm persists?
no no
Alarm solved
Alarm persists?
297 / 778
Applicability
Impact Loss
Trunk(s)
Cell/BTS(s)
Signaling
Degradation
No
No
298 / 778
no
yes
Alarm persists?
yes
no
Alarm solved
no
Alarm persists?
yes
299 / 778
Applicability
Impact Loss
Trunk(s)
Cell/BTS(s)
Signaling
Degradation
No
No
300 / 778
no
yes
Alarm persists?
no
no
Receiver operational?
yes
Onsite Repair/replace Receiver no Local trunk cabling OK? yes Trigger remote signal path and transmitter tests on MSC side
Alarm persists?
no
Alarm solved
301 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
302 / 778
no
yes
no
yes
yes
Alarm persists?
no
no
Receiver operational?
yes
Onsite Repair/replace Receiver no Local trunk cabling OK? yes Trigger remote signal path and transmitter tests on MSC side
Alarm persists?
no
Alarm solved
303 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
304 / 778
no
yes
no
Solve that alarm(s) first yes Related receiver alarm events? no yes Solve that alarm(s)
yes
Alarm persists?
no
no
Receiver operational?
yes
Alarm persists?
no
Alarm solved
305 / 778
Applicability
Impact Loss
Trunk(s)
Cell/BTS(s)
Signaling
Degradation
No
No
306 / 778
no
yes
no
Alarm persists?
no
Alarm solved
307 / 778
Applicability
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
308 / 778
Loop is activated?
no
yes
Remove loop no
Alarm persists?
no
Alarm solved
309 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
310 / 778
no
yes
no
yes
yes
Alarm persists?
no
no
Receiver operational?
yes
Onsite Repair/replace Receiver no Local trunk cabling OK? yes Trigger remote signal path and transmitter tests on MSC side
Alarm persists?
no
Alarm solved
311 / 778
Applicability
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
312 / 778
no
yes
no
Onsite
yes
Alarm persists?
no
no
Receiver operational?
yes
Repair/replace Receiver
no
Alarm persists?
no
Alarm solved
313 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
No
314 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
No
No
315 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
No
No
316 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
No
No
317 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
No
No
318 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
No
No
319 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
No
No
320 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
No
No
321 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
No
No
322 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
No
No
323 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
No
No
324 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
No
No
325 / 778
326 / 778
327 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
Remove loop
Alarm persists?
no
Alarm solved
328 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
329 / 778
no
yes
yes
Alarm persists?
no
no
Receiver operational?
yes
Alarm persists?
no
Alarm solved
330 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
331 / 778
no
yes
Alarm persists?
Alarm solved
332 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
333 / 778
G2 TC
A925 TC
Lock TC16
Lock MT120
Unlock TC16
Unlock MT120
Alarm persists?
no
Alarm solved
no
Alarm persists?
Onsite
yes
Onsite
yes
Replace DT16/TC16
or
Replace MT120
Replace MT120
Alarm persists?
no
Alarm solved
no
Alarm persists?
yes
334 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
335 / 778
G2 TC G2 TC or 9125 TC?
9125 TC
yes
no
yes
Alarm persists?
yes
Lock TC16
no
Lock MT 120
Unlock TC16
Unlock MT120
Alarm persists?
no
Alarm solved
no
Alarm persists?
Onsite
yes
yes
Replace DT16/TC16
or
Replace MT120
Replace MT120
Alarm persists?
no
Alarm solved
no
Alarm persists?
336 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
337 / 778
G2 TC
A925 TC
Lock TC16
Lock MT120
Unlock TC16
Unlock MT120
Alarm persists?
no
Alarm solved
no
Alarm persists?
Onsite
yes
Onsite
yes
Replace DT16/TC16
or
Replace MT120
Replace MT120
Alarm persists?
no
Alarm solved
no
Alarm persists?
yes
338 / 778
339 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
340 / 778
Lock TSC
Unlock TSC
Alarm persists?
no
yes
Onsite
Onsite
Onsite
Replace TSC
Alarm persists?
no
Alarm solved
341 / 778
342 / 778
343 / 778
Applicability
Impact Loss
Signaling Yes (if BTS-ADAPT = FLT, SM-ADAPT = FLT or TC-ADAPT = FLT) Yes (if BTS-ADAPT = FIT or SM-ADAPT = FIT)
Call Handling Yes (if BTS-ADAPT = FLT, SM-ADAPT = FLT or TC-ADAPT = FLT) Yes (if BTS-ADAPT = FIT or SM-ADAPT = FIT)
Degradation
344 / 778
yes
yes
Alarm persists?
no
Alarm solved
yes
Onsite Onsite
no
Onsite
Alarm persists?
no
Alarm solved
345 / 778
346 / 778
347 / 778
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
O&M; Capabilities No No
Alarm persists?
no
Alarm solved
348 / 778
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
349 / 778
Lock BSCADAPT
Unlock BSCADAPT
yes
Alarm persists?
no
Alarm solved
yes
Onsite
Replace BIUA
Alarm persists?
no
Alarm solved
350 / 778
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
351 / 778
yes
Lock BSCADAPT
Unlock BSCADAPT
Alarm persists?
no
Alarm solved
yes
Onsite
Replace BIU
Alarm persists?
no
Alarm solved
352 / 778
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
353 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
354 / 778
yes
yes
no
no Correct Address
no
Alarm persists?
yes
Onsite
Alarm solved
no
Alarm persists?
355 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
356 / 778
Lock BIUA
Unlock BIUA
no
no
Alarm persists?
no
Alarm solved
357 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
358 / 778
yes
no
yes
Alarm persists?
no
Alarm solved
yes
Onsite
Replace BCLA
Alarm persists?
no
Alarm solved
359 / 778
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
360 / 778
yes
no
yes
Alarm persists?
no
Alarm solved
yes
Onsite
Replace BCLA
Alarm persists?
no
Alarm solved
361 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
362 / 778
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
yes
Lock BSCADAPT
Unlock BSCADAPT
Alarm solved
no
Alarm persists?
363 / 778
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
364 / 778
yes
Lock BSCADAPT
Unlock BSCADAPT
Alarm persists?
no
Alarm solved
365 / 778
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
no
Alarm persists?
no
Alarm solved
366 / 778
367 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
368 / 778
no
yes
no
yes
Onsite
Alarm solved
no
Alarm persists?
369 / 778
Trunk(s) No No
Cell/BTS(s) No Yes
Signaling No Yes
Alarm solved
no
Alarm persists?
yes
370 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
371 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
372 / 778
no
no
Alarm persists?
no
Alarm solved
yes
Onsite
Alarm persists?
no
Alarm solved
373 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
374 / 778
no
no
yes
Alarm persists?
no
Alarm solved
yes
Onsite
Alarm persists?
no
Alarm solved
375 / 778
Applicability
Impact Loss
Trunk(s) No
Call Handling Yes (if BTS-ADAPT = FLT) Yes (if BTS-ADAPT = FIT)
Degradation
No
376 / 778
Lock BTSADAPT
Unlock BTSADAPT
Alarm persists?
no
Alarm solved
yes
Onsite
Alarm persists?
no
Alarm solved
377 / 778
Impact Loss
Trunk(s) No
Call Handling Yes (if BTS-ADAPT = FLT) Yes (if BTS-ADAPT = FIT)
Degradation
No
378 / 778
yes
Lock BTSADAPT
Unlock BTSADAPT
Alarm persists?
no
Alarm solved
yes
Onsite
Replace BIU
Alarm persists?
no
Alarm solved
379 / 778
Applicability
Impact Loss
Trunk(s) No
Call Handling Yes (if BTS-ADAPT = FLT) Yes (if BTS-ADAPT = FIT)
Degradation
No
380 / 778
yes
no
Lock BTSADAPT
Unlock BTSADAPT
no
Alarm persists?
yes
Onsite
Alarm solved
no
Alarm persists?
381 / 778
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
Alarm persists?
no
Alarm solved
382 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
383 / 778
yes
no
Lock BTSADAPT
Unlock BTSADAPT
no
Alarm persists?
yes
Onsite
Alarm solved
no
Alarm persists?
384 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
385 / 778
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
386 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No Yes
Signaling No Yes
387 / 778
yes
yes
yes
Correct Address
Alarm persists?
no
Alarm solved
yes
Onsite
Alarm persists?
no
Alarm solved
388 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
389 / 778
yes
Lock BSCADAPT
Unlock BSCADAPT
Alarm solved
no
Alarm persists?
390 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
391 / 778
no Correct settings
yes
Disable BSCADAPT
Init BSCADAPT
Alarm persists?
no
Alarm solved
392 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
393 / 778
no Correct settings
yes
Lock BSCADAPT
Unlock BSCADAPT
Alarm persists?
no
Alarm solved
394 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) Yes No
Signaling Yes No
no
Alarm persists?
no
Alarm solved
395 / 778
396 / 778
397 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
no
yes
Alarm persists?
no
Alarm solved
398 / 778
Impact Loss
Cell/BTS(s) No
Call Handling Yes (if SM-ADAPT = FLT) Yes (if SM-ADAPT = FIT)
O&M; Capabilities No
Degradation
No
No
Alarm solved
399 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
Onsite
Alarm persists?
no
Alarm solved
400 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
401 / 778
no
no
Alarm persists?
no
Alarm solved
yes
Onsite
Alarm persists?
no
Alarm solved
402 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
403 / 778
no
no
yes
Alarm persists?
no
Alarm solved
yes
Onsite
Alarm persists?
no
Alarm solved
404 / 778
Impact Loss
Trunk(s) Yes (if SM-ADAPT = FLT) Yes (if SM-ADAPT = FIT or TC_ADAPT = FLT)
Cell/BTS(s) No
Signaling Yes (if SM-ADAPT = FLT) Yes (if SM-ADAPT = FIT or TC_ADAPT = FLT)
Call Handling Yes (if SM-ADAPT = FLT) Yes (if SM-ADAPT = FIT or TC_ADAPT = FLT)
O&M; Capabilities No
Degradation
No
No
405 / 778
Lock SMADAPT/TC_ADAP T
Unlock SMADAPT/TC_ADAP T
Alarm persists?
no
Alarm solved
yes
Onsite
Alarm persists?
no
Alarm solved
406 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
No
No
407 / 778
G2 TC
no
9125 TC
Alarm persists?
no
Alarm solved
no
Alarm persists?
Onsite
yes
Onsite
yes
Replace BIU
or
Replace MT120
Replace MT120
Alarm persists?
no
Alarm solved
no
Alarm persists?
408 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
409 / 778
Reset MT120
Alarm persists?
no
Alarm solved
Onsite
yes
G2 TC G2 TC or 9125 TC?
9125 TC
Replace MT120
Replace MT120
Alarm persists?
no
Alarm solved
410 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
411 / 778
yes
no
Alarm persists?
yes
Onsite
Alarm solved
no
Alarm persists?
412 / 778
Impact Loss
Trunk(s) Yes (if SM_ADAPT = FLT) Yes (if SM_ADAPT = FIT or TC_ADAPT = FLT)
Cell/BTS(s) No
Signaling No
Call Handling Yes (if SM_ADAPT = FLT) Yes (if SM_ADAPT = FIT or TC_ADAPT = FLT)
O&M; Capabilities No
Degradation
No
No
No
Alarm solved
no
Alarm persists?
yes
413 / 778
Impact Loss
Cell/BTS(s) No
Call Handling Yes (if SBL SM-ADAPT) Yes (if SBL TC-ADAPT)
O&M; Capabilities No
Degradation
No
No
414 / 778
yes
no
Alarm persists?
yes
Onsite
Alarm solved
no
Alarm persists?
415 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
416 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
417 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
418 / 778
no
no Correct Address
no
Alarm persists?
yes
Onsite
Alarm solved
no
Alarm persists?
yes
419 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
420 / 778
no
no
yes
yes
Alarm persists?
no
yes
no
Alarm persists?
no
Alarm solved
yes
421 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
422 / 778
no
yes
no
yes
G2 TC G2 TC or 9125 TC?
9125 TC
Replace MT120
Replace MT120
yes
no
Alarm solved
no
Alarm persists?
yes
Replace MT120
Replace MT120
G2 TC
9125 TC
G2 TC or 9125 TC?
yes
Alarm persists?
no Alarm solved
423 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
424 / 778
no
no
yes
yes
Alarm persists?
no
no
yes
Onsite Repair/replace Ater interface no Local Ater cabling OK? yes Trigger remote signal path and transmitter tests on MSC side
Alarm persists?
no
Alarm solved
425 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
426 / 778
no
no
yes
Onsite
yes
Alarm persists?
no
no
Receiver operational?
yes
Repair/replace Receiver
no
yes Trigger remote signal path and transmitter tests on MSC side
Alarm persists?
no
Alarm solved
yes
427 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
428 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
429 / 778
no
no
yes
Alarm persists?
no
no
Receiver operational?
yes
Alarm persists?
no
Alarm solved
yes
430 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
431 / 778
Loop activated?
no
yes
Alarm solved
no
Alarm persists?
yes
432 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
433 / 778
Loop activated?
no
yes
no
Alarm solved
no
Alarm persists?
yes
434 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
yes
no
no
Alarm solved
no
Alarm persists?
yes
435 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
436 / 778
no
yes
no
yes
yes
Alarm persists?
no
no
Receiver operational?
yes
Onsite Repair/replace Receiver no Local cabling OK? yes Trigger remote signal path and transmitter tests on MSC side
Alarm persists?
no
Alarm solved
yes
437 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
438 / 778
no
no
yes
Alarm persists?
no
no Onsite
Receiver operational?
yes
Repair/replace Receiver
no
Local cabling OK? yes Trigger remote signal path and transmitter tests on MSC side
Alarm persists?
no
Alarm solved
439 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
440 / 778
no
no
yes
Onsite
yes
Alarm persists?
no
no
Receiver operational?
yes
Repair/replace Receiver
no
Alarm persists?
no
Alarm solved
yes
441 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
442 / 778
no
yes SMADAPT alarm events? Solve that alarm(s) first yes Related receiver alarm events? no yes Solve that alarm(s) no
yes
Alarm persists?
no
no
Receiver operational?
yes
Repair/replace Receiver
Alarm persists?
no
Alarm solved
443 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling No Yes
O&M; Capabilities No No
444 / 778
no
no
yes Related receiver alarm events? Solve that alarm(s) no yes Solve that alarm(s)
Onsite
yes
Alarm persists?
no
no
Receiver operational?
yes
Repair/replace Receiver
no
Alarm persists?
no
Alarm solved
yes
445 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling No Yes
O&M; Capabilities No No
446 / 778
no
yes
no
Solve that alarm(s) first yes Loops activated? yes Remove activated loops
yes
Alarm persists?
no
no
Receiver operational?
yes
Onsite no Local Ater cabling OK? yes Trigger remote signal path and transmitter tests on BSC side
Repair/replace Receiver
Alarm persists?
no
Alarm solved
447 / 778
Trunk(s) No Yes
Cell/BTS(s) No No
Signaling No Yes
O&M; Capabilities No No
448 / 778
no
yes
no
Solve that alarm(s) first yes Time slot 0 settings OK? no Correct the settings
yes
yes
Alarm persists?
no
no
Receiver operational?
yes
Onsite no Local Ater cabling OK? yes Trigger remote signal path and transmitter tests on BSC side
Repair/replace Receiver
Alarm persists?
no
Alarm solved
449 / 778
Trunk(s) No Yes
Cell/BTS(s) No No
Signaling No Yes
O&M; Capabilities No No
yes
no
no
Alarm solved
no
Alarm persists?
yes
450 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling No Yes
O&M; Capabilities No No
451 / 778
no
yes
no
Solve that alarm(s) first yes Related receiver alarm events? no yes Solve that alarm(s)
yes
Alarm persists?
no
no
Receiver operational?
yes
Onsite no Local cabling OK? yes Trigger remote signal path and transmitter tests on MSC side
Repair/replace Receiver
Alarm persists?
no
Alarm solved
452 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
453 / 778
no
yes
no
yes
yes Onsite
Alarm persists?
no
no
Receiver operational?
yes
Repair/replace Receiver
no
Local cabling OK? yes Trigger remote signal path and transmitter tests on MSC side
Alarm persists?
no
Alarm solved
yes
454 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
455 / 778
no
no
no
yes
Alarm persists?
no
no
Receiver operational?
yes
Onsite Repair/replace Receiver no Local cabling OK? yes Trigger remote signal path and transmitter tests on MSC side
Alarm persists?
no
Alarm solved
456 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
457 / 778
yes
no
no
Alarm persists?
yes
Alarm solved
no
Alarm persists?
yes
458 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
yes
Lock SM/TCADAPT
Unlock SM/TCADAPT
Alarm solved
no
Alarm persists?
yes
459 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
460 / 778
no Correct settings
Disable SM/TCADAPT
Init SM/TCADAPT
Alarm solved
no
Alarm persists?
yes
461 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
462 / 778
yes
Lock SM/TCADAPT
Unlock SM/TCADAPT
Alarm solved
no
Alarm persists?
yes
463 / 778
Impact Loss
Cell/BTS(s) No
O&M; Capabilities No
Degradation
No
No
no
Alarm solved
no
Alarm persists?
yes
464 / 778
465 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
466 / 778
Impact Loss
Trunk(s) No
Cell/BTS(s) No
Signaling No
O&M; Capabilities No
Degradation
No
No
No
467 / 778
Impact Loss
Cell/BTS(s) Yes (if TCU and all TRX are carried by this TCU)
Degradation
Yes (if TCU and some TRX are carried by other TCU)
No
No
468 / 778
no
Alarm persists?
no
yes
yes
Alarm persists?
no
Alarm solved
no
Alarm persists?
no
yes
469 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
470 / 778
Alarm persists?
no
yes
Alarm solved
Alarm persists?
no
yes
471 / 778
472 / 778
473 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
474 / 778
475 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
yes
Alarm persists?
no
yes
Onsite
Replace board
Alarm persists?
no
Alarm solved
yes
476 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
477 / 778
yes
Alarm persists?
no
Reset board
Onsite
yes
Alarm persists?
no
Alarm solved
478 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
479 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
480 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
Alarm persists?
no
Alarm solved
yes
481 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
Alarm persists?
no
Alarm solved
yes
482 / 778
Trunk(s)
Cell/BTS(s)
Signaling
Call Handling
O&M; Capabilities
483 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
484 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
Onsite
Alarm persists?
no
Alarm solved
485 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
486 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Replace suspected RIT
Alarm persists?
no
Alarm solved
487 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
488 / 778
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Replace suspected RIT
Alarm persists?
no
Alarm solved
489 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
490 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Replace suspected RIT
Alarm persists?
no
Alarm solved
491 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
492 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Replace suspected RIT
Alarm persists?
no
Alarm solved
493 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
494 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Replace suspected RIT
Alarm persists?
no
Alarm solved
495 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
496 / 778
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
Onsite
Replace SSW for the standby IP plane *
Alarm persists?
no
yes
*: The active IP plane may be mapped on the active or the standby SSW. There is no correlation between the two. In order to identify the standby IP plane, check which is the active and standby shelf manager. The active IP plane is linked to the active SMM. Mapping SSW-SMM: SMM(1) is connected to SSW(1) and SMM(2) to SSW(2).
497 / 778
Trunk(s) NO NO
Cell/BTS(s) NO NO
Signaling NO NO
Call Handling NO NO
O&M; Capabilities NO NO
29.18.1 IPMI-FIRMWARE-NOT-UP-TO-DATE
The IPMC FW version running on TP board is automatic updated.
498 / 778
Trunk(s) NO NO
Cell/BTS(s) NO NO
Signaling NO NO
Call Handling NO NO
O&M; Capabilities NO NO
Alarm persists?
no
Alarm solved
yes
499 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
500 / 778
Trunk(s) No Yes
Cell/BTS(s) No Yes
Signaling No Yes
501 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
502 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
Alarm persists?
no
Alarm solved
yes
503 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
Onsite
Replace suspected RIT, if alarm occurs repetitively
Alarm persists?
no
Alarm solved
504 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
Onsite
Replace suspected RIT, if alarm occurs repetitively
Alarm persists?
no
Alarm solved
505 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
Onsite
Replace suspected RIT, if alarm occurs repetitively
Alarm persists?
no
Alarm solved
506 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
Onsite
Replace suspected RIT, if alarm occurs repetitively
Alarm persists?
no
Alarm solved
507 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
Onsite
Replace suspected RIT, if alarm occurs repetitively
Alarm persists?
no
Alarm solved
508 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
Onsite
Replace suspected RIT, if alarm occurs repetitively
Alarm persists?
no
Alarm solved
509 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
510 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
511 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities No -
512 / 778
yes
Alarm persists?
no
Alarm solved
no
yes
Alarm persists?
no
Alarm solved
yes
513 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
514 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
Alarm persists?
no
Alarm solved
yes
515 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
516 / 778
no
Alarm persists?
no
Alarm solved
yes
yes
Onsite
Replace TP board
Alarm persists?
no
Alarm solved
517 / 778
Trunk(s) -
Cell/BTS(s) -
Signaling -
Call Handling -
O&M; Capabilities -
Onsite
Replace TP board if alarm occurs repetitively
Alarm persists?
no
Alarm solved
518 / 778
Trunk(s) NO NO
Cell/BTS(s) NO NO
Signaling NO NO
Call Handling NO NO
O&M; Capabilities NO NO
Onsite
Alarm persists?
no
Alarm solved
519 / 778
Trunk(s) NO NO
Cell/BTS(s) NO NO
Signaling NO NO
Call Handling NO NO
O&M; Capabilities NO NO
no
IPOverE1 is activated?
yes
Onsite
Replace TP board
Alarm persists?
no
Alarm solved
520 / 778
Trunk(s) NO NO
Cell/BTS(s) NO NO
Signaling NO NO
Call Handling NO NO
O&M; Capabilities NO NO
Alarm persists?
no
Alarm solved
yes
521 / 778
Trunk(s) NO NO
Cell/BTS(s) NO NO
Signaling NO NO
Call Handling NO NO
O&M; Capabilities NO NO
Alarm persists?
no
Alarm solved
yes
522 / 778
Trunk(s) NO NO
Cell/BTS(s) NO NO
Signaling NO NO
Call Handling NO NO
O&M; Capabilities NO NO
Alarm persists?
no
Alarm solved
yes
523 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
Alarm persists?
no
Alarm solved
yes
524 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
Alarm persists?
no
Alarm solved
yes
525 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
Alarm persists?
no
Alarm solved
yes
526 / 778
527 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
528 / 778
Trunk(s) NO NO
Cell/BTS(s) NO NO
Signaling NO NO
Call Handling NO NO
O&M; Capabilities NO NO
Alarm persists?
no
Alarm solved
yes
529 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
no
Alarm persists?
no
Alarm solved
yes
530 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
Alarm persists?
no
Alarm solved
yes
531 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
532 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
533 / 778
no
yes
Firmware upgrade is triggered automatically. Pay attention to conditions to trigger firmware upgrade successfully
Alarm persists?
no
Alarm solved
no
Alarm persists?
yes
yes
534 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
535 / 778
Onsite
Alarm persists? no
Replace SSW
yes
Onsite
Alarm persists? no Alarm solved
yes
Onsite
Replace ARTM or FRU * Alarm persists? no
yes
536 / 778
Port 18
Onsite
Alarm persists? no
Replace SSW
yes
Onsite
Alarm persists? no no Alarm persists?
Onsite
Replace SSW
yes
Alarm solved
yes
Onsite Onsite
Replace MUX Alarm persists? no no Alarm persists? Replace FRU *
yes yes
Alarm persists?
yes
Contact System Support * ARTM or FRU to be determined from the port number in additional data
537 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
538 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Replace SSW
Alarm persists?
no
Alarm solved
539 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
540 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Replace SSW
Alarm persists?
no
Alarm solved
541 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
542 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Replace SSW
Alarm persists?
no
Alarm solved
543 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
544 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Replace SSW
Alarm persists?
no
Alarm solved
545 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
546 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Replace SSW
Alarm persists?
no
Alarm solved
547 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
548 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Replace SSW
Alarm persists?
no
Alarm solved
549 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
550 / 778
Reset SSW
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
yes
no
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
yes
551 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
552 / 778
Reset SSW
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
yes
553 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
554 / 778
Reset SSW
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
yes
555 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
Alarm persists?
no
Alarm solved
yes
556 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
557 / 778
Reset SSW
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
yes
558 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
559 / 778
Reset SSW
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
yes
560 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
561 / 778
Reset SSW
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
Alarm persists?
no
yes
562 / 778
563 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
564 / 778
Trunk(s) NO NO
Cell/BTS(s) NO NO
Signaling NO NO
Call Handling NO NO
O&M; Capabilities NO NO
Alarm persists?
no
Alarm solved
yes
565 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
no
Alarm persists?
no
Alarm solved
yes
566 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
Alarm persists?
no
Alarm solved
yes
567 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
568 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
569 / 778
no
yes
Firmware upgrade is triggered automatically. Pay attention to conditions to trigger firmware upgrade successfully
Alarm persists?
no
Alarm solved
no
Alarm persists?
yes
yes
570 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
571 / 778
FAN
PEM or PC
yes
no
Replace SMM
Keep monitoring the BSC yes Is alarm mapped on the same board? no
Alarm persists?
no
Alarm solved
no
Alarm persists?
yes
Note:
Detailed information can be seen in the Additional Information. The corresponding relation between IPMI address and physical slot is like this:
IPMI Address 84 88 8C 90 94 98 9C
Physical slot 08 09 10 11 12 13 14
IPMI Address C0 C2 C4 C6 14 16 10
Physical slot 33 34 35 36 29 50 65
IPMI Address 12 C8 CA CC CE
Physical slot 66 81 82 83 84
572 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
573 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Alarm persists?
no
Alarm solved
574 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
575 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Alarm persists?
no
Alarm solved
576 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
577 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Alarm persists?
no
Alarm solved
578 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
579 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
Alarm persists?
no
yes
yes
Onsite
Alarm persists?
no
Alarm solved
580 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
581 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
582 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
583 / 778
yes
no
Onsite
Replace SSW
Alarm persists?
no
Alarm solved
584 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
585 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
Onsite
Replace FAN
Alarm persists?
no
Alarm solved
586 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
Alarm persists?
no
Alarm solved
yes
587 / 778
Trunk(s) no no
Cell/BTS(s) no no
Signaling no no
Call Handling no no
O&M; Capabilities no no
588 / 778
yes
no
no Alarm persists?
Alarm solved
yes
589 / 778
590 / 778
591 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
592 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
593 / 778
Trunk(s) Yes No
Cell/BTS(s) Yes No
Signaling Yes No
Onsite
Replace LIU board
Alarm persists?
no
Alarm solved
yes
594 / 778
Trunk(s) Yes No
Cell/BTS(s) Yes No
Signaling Yes No
no
Alarm persists?
no
Alarm solved
yes
595 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
Alarm persists?
no
Alarm solved
yes
596 / 778
Trunk(s) YES NO
Cell/BTS(s) YES NO
Signaling YES NO
597 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
598 / 778
Trunk(s) NO NO
Cell/BTS(s) NO NO
Signaling NO NO
Call Handling NO NO
O&M; Capabilities NO NO
Alarm persists?
no
Alarm solved
yes
599 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
Onsite
Check that 48 V redundancy between the two PEMs of E1 shelf is connected
Alarm cleared?
yes
Alarm solved
no
600 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
Onsite
Check that 48 V redundancy between the two PEMs of E1 shelf is connected
Alarm cleared?
yes
Alarm solved
no
601 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
Onsite
Replace PEM
Alarm persists?
no
Alarm solved
yes
602 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
603 / 778
no
Alarm persists?
no
Alarm solved
yes
yes
Onsite
If alarm is not present the other PEM too, replace faulty PEM
Alarm persists?
no
Alarm solved
604 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
605 / 778
no
Alarm persists?
no
Alarm solved
yes
yes
yes
Alarm persists?
no
no
yes
Onsite
Alarm persists?
no
Alarm solved
606 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
607 / 778
Alarm persists?
no
no
yes
Alarm solved
Alarm persists?
no
yes
Onsite
yes
Replace MUX
Alarm persists?
no
Alarm solved
608 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
609 / 778
Onsite
Replace LIU board
Alarm persists?
no
Alarm solved
yes
Onsite
Replace MUX
Alarm persists?
no
Alarm solved
610 / 778
611 / 778
612 / 778
yes
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
SBL in fault?
no
Alarm persists?
no
yes
yes
Alarm persists?
no
Alarm persists?
yes
yes
Alarm persists?
no
Alarm solved
yes
yes
613 / 778
614 / 778
yes
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
SBL in fault?
no
Alarm persists?
no
yes
yes
Alarm persists?
no
Alarm persists?
yes
yes
Alarm persists?
no
Alarm solved
yes
yes
615 / 778
616 / 778
yes
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
SBL in fault?
no
Alarm persists?
no
yes
yes
Alarm persists?
no
Alarm persists?
yes
yes
Alarm persists?
no
Alarm solved
yes
yes
617 / 778
618 / 778
yes
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
SBL in fault?
no
Alarm persists?
no
yes
yes
Alarm persists?
no
Alarm persists?
yes
yes
Alarm persists?
no
Alarm solved
yes
yes
619 / 778
620 / 778
yes
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
SBL in fault?
no
Alarm persists?
no
yes
yes
Alarm persists?
no
Alarm persists?
yes
yes
Alarm persists?
no
Alarm solved
yes
yes
621 / 778
Trunk(s) No Yes
Cell/BTS(s) No Yes
Signaling No Yes
622 / 778
yes
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
SBL in fault?
no
Alarm persists?
no
yes
yes
Alarm persists?
no
Alarm persists?
yes
yes
Alarm persists?
no
Alarm solved
yes
yes
623 / 778
Trunk(s) No Yes
Cell/BTS(s) No Yes
Signaling No Yes
624 / 778
yes
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
SBL in fault?
no
Alarm persists?
no
yes
yes
Alarm persists?
no
Alarm persists?
yes
yes
Alarm persists?
no
Alarm solved
yes
yes
625 / 778
Trunk(s) No Yes
Cell/BTS(s) No Yes
Signaling No Yes
626 / 778
yes
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes
SBL in fault?
no
Alarm persists?
no
yes
yes
Alarm persists?
no
Alarm persists?
yes
yes
Alarm persists?
no
Alarm solved
yes
yes
627 / 778
628 / 778
Alarm persists?
no
yes
Alarm persists?
no
Alarm solved
yes Trigger remote signal path and transmitter test on MSC side
Alarm persists?
no
yes
629 / 778
no
no Alarm persists?
yes
Alarm solved
Alarm persists?
no
yes
yes
630 / 778
Trunk(s) No No
no
no Alarm persists?
yes
Alarm solved
Alarm persists?
no
yes
yes
631 / 778
Trunk(s) No No
no
no Alarm persists?
yes
Alarm solved
Alarm persists?
no
yes
yes
632 / 778
Trunk(s) No No
633 / 778
Alarm persists?
no
yes
Trigger manually the OML mode, via the command: reset Abis_Hway_TP of the concerned Abis
Alarm solved
Alarm persists?
no
yes
634 / 778
Trunk(s) no no
Cell/BTS(s) yes no
Signaling no no
Call Handling no no
O&M; Capabilities no no
635 / 778
no
yes
Alarm persists?
no
Alarm solved
yes
636 / 778
Trunk(s) No No
yes
Alarm persists?
no
no
637 / 778
Trunk(s) No No
638 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
yes
yes
Alarm persists?
no
yes
639 / 778
Trunk(s) No No
640 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
yes
yes
Alarm persists?
no
yes
641 / 778
Trunk(s) No No
no
Alarm persists?
no
yes
yes
Alarm persists?
yes
Alarm solved
no
642 / 778
Trunk(s) No No
no
Alarm persists?
no
yes
yes
Alarm persists?
yes
Alarm solved
no
643 / 778
Trunk(s) No No
no
Alarm persists?
no
yes
yes
Alarm persists?
yes
Alarm solved
no
644 / 778
Trunk(s) No No
645 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
yes
yes
Alarm persists?
no
yes
646 / 778
Trunk(s) No No
yes
Alarm persists?
no
no
no
647 / 778
Trunk(s) No No
648 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
yes
yes
Alarm persists?
no
yes
649 / 778
Trunk(s) No No
no
Alarm persists?
no
yes
yes
Alarm persists?
yes
Alarm solved
no
650 / 778
Trunk(s) No No
Alarm persists?
no
Alarm solved
yes
651 / 778
Trunk(s) No No
652 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
yes
yes
Alarm persists?
no
yes
653 / 778
Trunk(s) No No
no
Alarm persists?
no
yes
yes
Alarm persists?
yes
Alarm solved
no
654 / 778
Trunk(s) No No
655 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
yes
yes
Alarm persists?
no
yes
656 / 778
Trunk(s) No No
O&M; Capabilities No No
657 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
yes
yes
Alarm persists?
no
yes
658 / 778
Trunk(s) No No
O&M; Capabilities No No
no
Alarm persists?
no
yes
yes
Alarm persists?
yes
Alarm solved
no
659 / 778
Trunk(s) No No
O&M; Capabilities No No
660 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
yes
yes
Alarm persists?
no
yes
661 / 778
Trunk(s) No No
O&M; Capabilities No No
662 / 778
no
Alarm persists?
no
yes
yes
Alarm solved
no
yes
yes
Alarm persists?
no
yes
663 / 778
Trunk(s) No No
O&M; Capabilities No No
no
Alarm persists?
no
yes
yes
Alarm persists?
yes
Alarm solved
no
664 / 778
Trunk(s) No No
O&M; Capabilities No No
no
no
yes
Alarm persists?
yes
Alarm solved
no
665 / 778
Trunk(s) No No
O&M; Capabilities No No
no
Alarm persists?
no
yes
yes
Alarm persists?
yes
Alarm solved
no
666 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
Alarm persists?
no
yes
Alarm persists?
yes
Alarm solved
no
667 / 778
Trunk(s) No No
O&M; Capabilities No No
Alarm persists?
no
yes
Alarm persists?
yes
Alarm solved
no
668 / 778
Trunk(s) No No
Cell/BTS(s) no No
Signaling No No
Call Handling No No
O&M; Capabilities No No
669 / 778
670 / 778
671 / 778
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling Yes No
Alarm persists?
no
Alarm solved
yes
672 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
673 / 778
674 / 778
675 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
Alarm persists?
no
Alarm solved
yes
676 / 778
Applicability
Impact Loss
Cell/BTS(s) No
Call Handling Yes (if TRAU-CP = FLT) Yes (if TRAU-CP = FIT )
O&M; Capabilities No
Degradation
No
No
677 / 778
Alarm persists?
no
yes
G2 TC G2 TC or 9125 TC?
9125 TC
Alarm solved
Alarm persists?
no
yes
678 / 778
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
679 / 778
G2 TC
no
9125 TC
Alarm persists?
no
Alarm solved
no
Alarm persists?
Onsite
yes
Onsite
yes
Replace BIU
Replace MT120
Replace MT120
Alarm persists?
no
Alarm solved
no
Alarm persists?
680 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
O&M; Capabilities No No
681 / 778
Reset MT120
Alarm persists?
no
Alarm solved
yes
G2 TC
Replace MT120
Replace MT120
Alarm persists?
no
Alarm solved
yes
682 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
683 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
684 / 778
no
no
yes
yes
Alarm persists?
no
no
yes
yes
Alarm persists?
no
Alarm solved
685 / 778
Applicability
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
686 / 778
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
687 / 778
Applicability
Trunk(s) Yes No
Cell/BTS(s) No No
Signaling Yes No
O&M; Capabilities No No
688 / 778
Check the HSI cable. If both link failed replace the corresponding cable
no Alarm persists?
yes
Alarm solved
Alarm persists?
no
yes
689 / 778
Applicability
Trunk(s) No No
Cell/BTS(s) No No
Signaling No No
Call Handling No No
O&M; Capabilities No No
690 / 778
no Alarm persists?
yes
Alarm solved
Alarm persists?
no
yes
691 / 778
692 / 778
693 / 778
Description Interface Address. This specifies the connection of the processor to the internal switch of the BSC: Byte 0: On-Board Controller Interface identity Byte 1: Network address, enabling identification of the SBL links from the processor to the internal switch.
This specifies the Logical Control Element-Identification. The SBL type specifies the processor type. There is no longer a direct relationship between LCE-ID and CE number. Always 0. Finite Message Machine (FMM) -ID, this identifies the task/process. It is the instruction pointer of the fault. Example: 1E hex = SCCP 1F; hex = N7 SLH (N7 Signaling link handler). Instruction Pointer of the processor address where the fault happened. The first byte is the LSB. Code Segment of the processor address where the fault happened. The first byte is the LSB. Error type, see Table 7. The first byte is the LSB. Sequence number. This is used to distinguish between similar error types. Not relevant. User Data 0. User data providing additional information. User Data 1. User data providing additional information. User Data 2. User data providing additional information. User Data 3. User data providing additional information.
3 4-5
6-7
8-9 10 - 11 12 13 14 - 15 16 - 17 18 - 19 20 - 21
694 / 778
695 / 778
Dec 28 29 30 31 32 33 34 35 36 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56
Hex 1C 1D 1E 1F 20 21 22 23 24 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38
FMM-ID LME-NETW-MAINT BSSAP SCCP M7-SLH CALL-CONTROL-ACT LME-M7-DTC ME-TCSM ME-MMC ME-DISK-HDLR TCH-RM LE-L3-L2-X.25 LME-X.25 SLNM SM ME-DBASE-TEST-FMM L4E-TRANSPORT L5E-SESSION L6E-PRESENTATION L7E-OSMAE L7E-OSMAP L7E-FTAM DTC-N-7-LDC ME-TRACE-DEBUG-MSTR CALL-CONTROL-TCU ME-EMPTY BSC-HEART-BEAT-CTL TRADEB-SLAVE-F ME-EMPTY-SLAVE
Meaning Network maintenance. BSS Application Part. Signaling Connection Control Part. Signaling link handler for N7. Active CPR call control. Link maintenance entity for N7. TCSM. MMC. Disk handler. TCH resource manager. Link entity for L3, L# X.25. Link maintenance entity for X.25. Signaling link network manager (N7). Signaling manager (N7). Database test FMM. Transport. Session. Presentation. OSMAE. OSMAP. FTAM. DTC N7 local data collector. Trace/debug master. TCU call control. Empty. BSC heartbeat control. Trace/debug slave. Empty slave.
696 / 778
Dec 57 58 59 60 61 62 63 64 66 67 68 69 70 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87
Hex 39 3A 3B 3C 3D 3E 3F 40 42 43 44 45 46 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 55 56 57
FMM-ID RATA-TCU REMOTE-REQUEST-HDLR REPL-REL-SYNC BACK-UP-DATA-HDLR ME-SECURITY-FILE ROLL-BACK-HDLR RATA-DTC RATA-CPR CPR-N-7-LDC ME-BSC-SW-REPLACE TONE-DTMF-DH-FMM CALL-CONTROL-DTC ME-SUBSCR-ADMIN-CPR OBCI-NH-TEST-FMM ME-HSK-2 ME-HSK-3 RATA-CPR-OSI ME-MMC-TCU ME-INIT-CPR-OSI ME-ALARM-CPR-OSI ME-MAINT-CPR-OSI CPR-TRF-LDC RMH-MSG-HANDLER RECOVERY-ME DH-CPR TELECOM-SUPERV-MOD ASN-ABIS ASN1-CONV
Meaning Read and Throw Away TCU (test only). Remote request handler. Replaced Relation Sync. Backup data handler. Security file. Rollback handler. Read and Throw Away DTC (test only). Read and Throw Away CPR (test only). CPR N7 local data collector. BSC software replacement. DTMF tone device handler. DTC call control. Subscriber administration CPR. On-board controller network handler test. ME housekeeping. ME housekeeping. Read and Throw Away CPR (test only). MMC TCU. Initialize OSI-CPR. OSI-CPR alarm. OSI-CPR maintenance. CPR traffic local data collector. Remote message handler. Recovery. CPR device handler. Telecom supervision module. ASN Abis. ASN1 converter.
697 / 778
Dec 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115
Hex 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73
FMM-ID ME-LOCAL-MAINT-CPR ME-LOCAL-ALARM-CPR ME-HSK-LOCAL ME-HSK-4 LOC-OVRL-CTL TRACE-COORDINATOR TRACE-ADMINISTRATOR TCU-BTS-LDC ME-MEAS-ADMIN ME-MEAS-RECOVERY ME-HSK-5 ME-MEAS-CENTRAL-COLL RECOV-SL-ME ME-HSK-6 ME-HSK-7 ME-MAINT-DTC ME-MAINT-TCU ME-EMPTY-1386 ME-EMPTY-SLAVE-1386 BSC-SCSI-CONTROL RTS-MANAGER RTS-RECONFIGURE OMU-SIMULATOR FU-SIMULATOR MSC-SIMULATOR SMS-CB-MASTER SMS-CB-LOCAL DH-DTC
Meaning CPR local maintenance. CPR local alarm. Local ME housekeeping. Housekeeping 4 Local overload control. Trace Coordinator. Trace Administrator. BTS local data collector for TCU. Measurement administrator. Measurement of recovery. ME housekeeping. Central measurement collector. Recovery of Signaling links. ME housekeeping. ME housekeeping. DTC maintenance. TCU maintenance. Empty FMM for 1386. Empty FMM for slave 1386. Housekeeping. RTS Manager. Reconfigure RTS. OMU simulator. FU simulator. MSC simulator. SMS-CB master. SMS-CB local. DTC device handler.
698 / 778
Dec 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133
Hex 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F 80 81 82 83 84 85
FMM-ID DH-TCU TCSM-ME-CPR TCSM-ME-TCU USAGE-STATE-MASTER USAGE-STATE-SLAVE M7-TEST-FMM TRX-MANAGER TRX-REMAPPER ME-FMM-INIT FMM-SPARE-0 FMM-SPARE-1 FMM-SPARE-2 FMM-SPARE-3 FMM-SPARE-4 FMM-SPARE-5 FMM-SPARE-6 FMM-SPARE-7 SCCP-SCMG
Meaning TCU device handler. TCS on the CPR. TSC on the TCU. Usage State on Demand master. Usage State on Demand slave. N7 test. TRX manager on the CPR. TRX remapper on the CPR. Initialize FMM. Spare FMM. Spare FMM. Spare FMM. Spare FMM. Spare FMM. Spare FMM. Spare FMM. Spare FMM. Signaling Connection Control Part management procedure for the S -CPR. SCM test module. Disk handler for the 386 processor. BCLA handler on the scanning DTCS. Receive and Throw Away (test module). Trace on local data collectors. Master Alertor (not used). Slave Alertor (not used). Heartbeat on the Evolium 9120 BSC. Local alarm handler.
86 87 88 89 8A 8B 8C 8D 8E
699 / 778
Dec 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170
Hex 8F 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9E 9F A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA
FMM-ID ME-EXT-RED TCH-RM-LDC RATA-ABS3-AY RATA-ATR4-AY RATA-SYS4-AY RATA-OSI3-AY RATA-BCC1-AY RATA-TCU RATA-DTC RATA-CPR RATA-CPR-OSI RATA-SYS-AY RATA-OSIS-AY MEAS-COORDINATOR CC-DATA-COLLECTOR CC-RESULT-HANDLER DER-RESULTS-HANDLER CENTRAL-ALERTOR C_ALERTOR ME-MAINT-MSTER-TEST LME-OFF-LINE-TEST RATA_ABS3_AD RATA_ATR4_AD RATA_SYS4_AD RATA_OSI3_AD RATA_BBC1_AD ME_ASN1_CONV2 ME_BROADCAST_MGT
Meaning Extension/reduction handler. TCH-RM local data collector. Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Message coordinator on the O-CPR. Cumulative collector. Cumulative result collector. Discrete Event Register result handler. Central Alertor on the O-CPR. Alertor (not used). Master maintenance test module. Off-line test module. Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). ASN1 Convertor module 2. Broadcast bus maintenance module.
700 / 778
Dec 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 194 195 196 197 198
Hex AB AC AD AE AF B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF C0 C2 C3 C4 C5 C6
FMM-ID L4_CONVERGENCE RATA_ABS1_AE RATA_ATR1_AE RATA_SYS1_AE RATA_OSI1_AE RATA_ABS3_AE RATA_ATR4_AE RATA_SYS4_AE RATA_OSI3_AE RATA_BBC1_AE ME_CLK_MAINT_MSTR ME_BC_MAINT_MSTR ME_ALARM_CORRELATOR RATA_ABS1_AH RATA_ATR1_AH RATA_SYS1_AH RATA_OSI1_AH RATA_ABS3_AH RATA_ATR4_AH RATA_SYS4_AH RATA_OSI3_AH RATA_BBC1_AH CF_INTERPRETER FMM_INIT_G2 ME_PRELOADER_G2 ME_SYSTEM_NIT ME_PRELOADER
Meaning Convergence function for SMSCB. Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Clock maintenance module. Broadcast bus maintenance module. Alarm correlator module. Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Command file interpreter. FMM init module for Evolium 9120 BSC. Loader module for Evolium 9120 BSC. System init module. PreLoader module.
701 / 778
Dec 199
Hex C7
FMM-ID GPRSAP_FMM
Meaning GPRS module (similar to BSSAP for Telecom). Responsible for the handling of commands from the MFS except O&M; and paging messages. Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). BTS Extension reduction module. FM module for transmission. Load housekeeping on the DTC. Load housekeeping on the TCU. Module responsible for the GPRS signaling link between the MFS and the BSC. LAPD Layer 2 module on the DTC. GPRS module (similar to RFMGT for telecom). Responsible for relaying commands from/to RFMGT on the TCU and allocation call buffers on the TCU side. Configuration transmission module on the CPR. Configuration transmission module on the TCUs. GPRS module (similar to TSM in telecom). Responsible for central data for the GPRS. Located on the S_CPR pair. Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module).
200 201 202 203 204 205 206 207 208 209 210 212 213 214
C8 C9 CA CB CC CD CE CF D0 D1 D2 D4 D5 D6
RATA_ABS1_AP RATA_ATR1_AP RATA_SYS1_AP RATA_OSI1_AP RATA_ABS3_AP RATA_ATR4_AP RATA_SYS4_AP RATA_OSI3_AP RATA_BBC1_AP ME_BTS_EXT_RED FM_TRANS HSK_LOC_DTC HSK_LOC_TCU L3_DIS
215 216
D7 D8
DTC_LAPD_L2_FMM RF_GPRS_FMM
D9 DA DB
DC DD DE DF
702 / 778
Hex E0 E1
Meaning Receive and Throw Away (test module). Paging module, responsible for the handling of paging messages located on the GPRSAPs DTCs. FM module for transmission. OSN_D test module. Housekeeping module 7. TSC Man Mahine Interface module. Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Receive and Throw Away (test module). Radio Measurement Stat. Radio Measurement Stat on each TCU. ABIS Resource Manager module. Connection control. RFM CCCH Handler. GPRS O&M; module, responsible for the O&M; between the MFS and the BSC. Hardware Configuration Management action scheduler Hardware Configuration Management Abis handler. Hardware Configuration Management BTS data handler. Hardware Configuration Management traffic resource handler. Hardware Configuration Management signaling resource handler. Hardware Configuration Management multiplexing control block.
232 233 234 235 241 242 243 244 245 246 247 248 249 250 251
E2 E3 E4 E5 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB
FM_TRANS_CORR OSND_TEST ME_HSK_7 TSC_MMI RATA_ABS3_AT RATA_ATR4_AT RATA_SYS4_AT RATA_OSI3_AT RATA_BBC1_AT CENTRAL_RMS TCU_RMS_LDC ABIS_RM COCO RFM_CCCH GOM
252
FC
ME_ABIS_HCM_SCHED
253
FD
ME_ABIS_PORT_HDLR
254
FE
HCM_BTS_DATA_HDLR
255
FF
HCM_TRAF_RES_HDLR
256
100
HCM_SIGN_RES_HDLR
257
101
HCM_MCB_MAPPER
703 / 778
Type (Hex) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13
Error Name DUMMY SYSTEM_RESTART SYSTEM_REBOOT SYSTEM_RELOAD TRADEB_ERROR_CALL ME_INIT_GLOB_INIT ME_INIT_TAKE_OVER ME_INIT_TIME OUT L1_TRUNK_FAILURE DBASE_ACC_FAILURE NO_TRUNK_CELLS ILC_INIT_FAILURE ILC_DMA_UNDERRUN ILC_DMA_OVERRUN OBCI_HW_FLT OBCI_SW_FLT SSD_ACCESS_FAIL DATABASE_ERROR DATABASE_DATA_INC INC_MESS_DATA
704 / 778
Type (Dec) 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
Type (Hex) 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E
Error Name ICLP_FAILURE BS_CH_RLS_FAIL CH_CONF_ERROR MEAS_TYPE_ERROR NO_LOCAL_REFERENCE_AVAILABLE WRONG_TMS_TYPE MASTER_FILE_CORRUPTED MASTER_FILE_DISK_ERROR ILC_DE_QUEUE_TWICE ILC_EN_QUEUE_TWICE ILC_NO_FR_CELL BOOTSTRAP_ERR NMI UNEXPECTED_INT INT_DATA_INC MTF_RSL_SMALL PR_DISABLE PR_RESTART OPEN_FILE_FLT READ_REC_FLT CLOSE_FILE_FLT FCB_LOC_TO_OMU WRONG_TCB_FIG ERR_LOAD_REQ ERR_ACK_NACK OUT_OF_STATE INTL_CATASTR
705 / 778
Type (Dec) 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 65 66 67 68 69 70 71 72 73 74
Type (Hex) 2F 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 41 42 43 44 45 46 47 48 49 50
Error Name SPC_ALARM INTL_DATA_FLT GSM_0808_MSG_UNKNOWN GSM_0808_MSG_UNEXPEC GSM_0808_IEI_UNEXPEC GSM_0808_IE_FORM-ERR GSM_0808_IE_SEM_ERR GSM_0408_MSG_UNKNOWN GSM_0408_MSG_UNEXPECTED GSM_0408_PRTDISC_ERROR GSM_0408_IE_FORM_ERROR GSM_0408_IE_SEM_ERROR INTERNAL_MESSAGE_UNKNOWN INTERNAL_MESSAGE_UNEXPECTED TCHRM_NO_ANSWER TCHRM_RF_NO_ANSWER TRADEB_LBS CANCEL_EXPIRED_TIMER TOO_MANY_RESTARTS STAND_ALONE OBCI_LINK_HW_FAULT NETWORK_CONFIGURATIOM OBCI_LINK_OS INPUT_MAINT MAINT_SEQUENCE XMEM_FAULT XMCK_FAULT
706 / 778
Type (Hex) 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67
Error Name GSM_0858_MS_UNEXPECTED GSM_0808_CIC_UNKNOWN CONF_CH_DISREP ERROR_REPORT_FROM_BTS RF_CHANNEL_RELEASE_FAILURE ASN1_DECODE_FAILURE ASN1_ENCODE_FAILURE SW_REPLACEMENT_DATA_ERROR INCORRECT_FILE_CONTENT UPDATE_SW_SYSREC_FAILURE READ_SW_SYSREC_FAILURE MAX_SMAP_RETRIES HEARTBEAT_ERROR HEARTBEAT_RESET NO_RESET_CIC_ACK DIVIDE_ERROR INV_TSS STA_EXC CIPHERING_DATA_INCONSISTENT UNKNOWN_CIRC_RECEIVED UNKNOWN_CIRC_TRANSMIT INVALID_ACCESS_TYPE EXPANSION_FAILED OBCI_RESET NO_MORE_DESCRIPTORS INVALID_DESCRIPTOR_TYPE INVALID_SELECTOR
707 / 778
Type (Dec) 104 187 188 189 191 192 679 680 681 682 683 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070
Type (Hex) 68 BB BC BD BF C0 2A7 2A8 2A9 2AA 2AB 41F 420 421 422 423 424 425 426 427 428 429 42A 42B 42C 42D 42E
Error Name LOG_LIN_CONV_ERR INVALID_OPCODE DOUBLE_FAULT SEGMENT_NOT_PRESENT GEN_PROT PAGE_FAULT C2_OVERFLOW C2_NULL_PTR PRCSS_END C2_RANGEFAIL C2_RTS NO_SUPVISION_PROCESS_CONTROL_BLOCK NO_APPLICATION_PROCESS_CONTROL_BLOCK PROCESS_CONTROL_BLOCK_OV1 PROCESS_CONTROL_BLOCK_OV2 DE_Q_TWICE NO_SUPV_STACK NO_TCB NO_MAIL LINK EN_Q_TWICE NO_APPLICATION_STACK INVALID_JOB_TYPE NO_TIMER_ML INVALID_MREQ_SIZE NO_UMEM_BLOCK NO_MESSAGE_BUFFER INVALID_MESSAGE_TYPE
708 / 778
Type (Dec) 1071 1072 1073 1074 1075 1076 1077 1078 1079 1097
Type (Hex) 42F 430 431 432 433 434 435 436 437 449
Error Name INVALID_FMM_ID INVALID_MESSAGE_PRIORITY INVALID_OSINF_TYPE INVALID_SCFI CFGI_NOT_SET SANITY_TIME OUT ILLEGAL_CALL STACK_CHECK INVALID_CLOCK_VALUE INVALID_MESSAGE_BASIC_TO_DESTINATION
709 / 778
Description IAD. This specifies the connection of the processor to the internal switch of the BSC: Byte 0: OBCI identity Byte 1: Network address, enabling identification of the SBL links from the processor to the internal switch.
This specifies the LCE-ID. The SBL type specifies the processor type. There is no longer a direct relationship between LCE-ID and CE number. Always 0. Not relevant. IP of the processor address where the fault happened. The first byte is the LSB. CS of the processor address where the fault happened. The first byte is the LSB. Not relevant. Not relevant. User Data 0. User data providing additional information. User Data 1. User data providing additional information. User Data 2. User data providing additional information. User Data 3. User data providing additional information.
710 / 778
36.4.1 [33,3]
The additional information bytes for this alarm are defined in the following table. Byte Number (Intel notation - 1st byte is Least Significant Byte (LSB)) Format 1: 0 and 1 2 3 4 Format 2: Table 10: Additional Information for Alarm [33,3] Meaning FF CE identity 0 FF
Table 11: Additional Information for Alarms [34,0] to [34,2] and [34,4] to [34,6]
711 / 778
36.4.3 [34,3]
The additional information bytes for this alarm are defined in Tables 12 to 15, below. Test Results Explanation Byte Number 0 1 2 Meaning Test-segment Test-flt-type Test-raw-data (0) Test Not Executed Value 0 assigned Link Network Address Value 255 assigned Test Executed Test segment failure. See Table 13. Test fault type. See Table 14. -
3 4 5 6
Switch Network Address. Link Type. Port Number. Test Result of TDM connection between port 0 and the port given in Raw Data (3). See Table 15. Test Result of TDM connection between port 1 and the port given in Raw Data (3). See Table 15. Test Result of TDM connection between port 2 and the port given in Raw Data (3). See Table 15. Test Result of TDM connection between port 3 and the port given in Raw Data (3). See Table 15. Test Result of TDM connection between port 4 and the port given in Raw Data (3). See Table 15. Test Result of TDM connection between port 5 and the port given in Raw Data (3). See Table 15. Test Result of TDM connection between port 6 and the port given in Raw Data (3). See Table 15. Test Result of TDM connection between port 7 and the port given in Raw Data (3). See Table 15. Test Result of TDM connection between port 8 and the port given in Raw Data (3). See Table 15.
Test-raw-data (5)
Test-raw-data (6)
Test-raw-data (7)
10
Test-raw-data (8)
11
Test-raw-data (9)
12
Test-raw-data (10)
13
Test-raw-data (11)
14
Test-raw-data (12)
712 / 778
Test Results Explanation Byte Number 15 Meaning Test-raw-data (13) Test Not Executed Test Executed Test Result of TDM connection between port 9 and the port given in Raw Data (3). See Table 15. Test Result of TDM connection between port A and the port given in Raw Data (3). See Table 15.
16
Test-raw-data (14)
Test Results Explanation Byte Number 17 Meaning Test-raw-data (15) Test Not Executed Test Executed Test Result of TDM connection between port B and the port given in Raw Data (3). See Table 15. Test Result of TDM connection between port C and the port given in Raw Data (3). See Table 15. Test Result of TDM connection between port D and the port given in Raw Data (3). See Table 15. Test Result of TDM connection between port E and the port given in Raw Data (3). See Table 15. Test Result of TDM connection between port F and the port given in Raw Data (3). See Table 15.
18
Test-raw-data (16)
19
Test-raw-data (17)
20
Test-raw-data (18)
21
Test-raw-data (19)
Test Segment 1
Description Get channel, send a request of MAINTENANCE_PACKET to find a free channel. Wait for EOP_SENT or NACK. Send a request of tunnel word for maintenance interrogate CH0, test if it is accepted, wait for message. Only for diagnostic test, before starting test, it needs to send mask a CH0 alarm to modify mask, send maintenance interrupt and maintenance command to change status of ports.
713 / 778
Test Segment 2
Description Send a request of tunnel word for maintenance command CH0, with set maintenance busy and alarm shutoff, test if it is accepted. Send a request of tunnel word for maintenance interrogate CH0, test if it is accepted and wait for message.
Get channel, send a request of MAINTENANCE_PACKET with maintenance select on port under test. Send a request of tunnel word for maintenance command CH0 with reset alarm shutoff. Test if it is accepted. Send a request of tunnel word for maintenance interrogate CH0, test if it is accepted and wait for message.
Send a request of MAINTENANCE_PACKET with normal select on port under test. Wait for NACK. Send a request of tunnel word for maintenance command CH0 with reset maintenance busy. Test if it is accepted. Send a request of tunnel word for maintenance interrogate CH0, test if it is accepted and wait for message.
8 9 10
Send a packet with seven interrogates. Verify that the pointer correctly decremented. Send packet of escape words. The transmitted and received packet are compared. Set a path, send a packet of escape words. The transmitted and received packet is compared. Re-select path. Wait for NACK. Send maintenance packet with maintenance select on port under test. Wait for NACK and write violation alarm.
11 12
13
Send packet of escape words. The transmitted and received packets are compared (TDM bus). Set up permanent path via test depth, towards own OBCI, with test pattern attached. Try to set up a temporary path towards the permanent path. This should be rejected. Try to set up a temporary path towards the permanent path, using maintenance selects. The AS bit is 0, so an alarm should be generated.
14 15 16
Table 13: Test Segment Results for Alarm [34,3], [51,1] (Byte 0) and [51,2] (One Byte Only)
714 / 778
Fault Type 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
Description No errors. Not accepted tunnel word interrogate. timeout tunnel word interrogate. Not accepted tunnel word command. Received tunnel alarm. Message out of sequence. No channel available. Not accepted tunnel word interrogate. All channels NACKed, maintenance packet not sent. timeout for msg 158. Wrong pointer received. Timeout for msg 157. Not accepted tunnel word command. Not accepted tunnel word interrogate. Wrong pointer received. Timeout for msg 157. No channel available. Timeout no event msg received. Timeout for msg second path. Timeout for msg first path. Not accepted tunnel word command. Not accepted tunnel word interrogate. Wrong pointer received. Timeout for msg 157. No NACK received but 2 EOP. Timeout no NACK received. Not accepted tunnel word command. Not accepted tunnel word interrogate.
715 / 778
Fault Type 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49
Description Wrong pointer received. Timeout for msg 157. Wrong pointer decrement after EOP. Wrong pointer decremented before EOP. Timeout for msg 158. Wrong pkt received before EOP. Wrong pkt received after EOP. Timeout for msg 158. All channels NACKed, maintenance pkt not sent. Wrong pkt received after EOP. Wrong pkt received before EOP. Timeout for msg 158. Timeout for msg 158. Timeout for all msg. Timeout for msg 151 and msg second path. Timeout for msg 151 and msg first path. Timeout for msg 151. Timeout for msg first path and second. Timeout for msg second path. Timeout for msg first path. Timeout wrong sequence message. Values incompatible with Z_TUNNEL_type, Z_TEST_PORT.B_side and Z_TEST_PORT.B_depth. Wrong sequence message Result of Maintenance Interrogate: ACI=0 - all channels idle MB=0 - maintenance busy AS=0 - alarm shutoff.
50 51
52
716 / 778
Fault Type 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76
Description ACI=0 MB=1 AS=0 ACI=0 MB=1 AS=1 ACI=1 MB=0 AS=0 ACI=1 MB=0 AS=1 ACI=1 MB=1 AS=0 ACI=1 MB=1 AS=1 TDM test bus fail, resource seize fail. TDM bus fail. Overall timer has expired. Overall timer has expired. Cable test has failed. Wrong PTR decremented after EOP. Wrong PTR decremented after EOP. Timeout for msg 158. Plug Test Error. DCDC State Change. Send tunnel word not accepted. Timeout msg for msg 157. Processor does not control BCLA. BCLA: wrong ID. BCLA: this is not the rack BCLA. BCLA: this is not the sys BCLA. BCLA: the write register has failed. BCU pattern test has failed.
717 / 778
Fault Type 77 78
Description BCU fail bit set. No system test allowed according an R_xx.
Table 14: Test Fault Type for Alarm [34,3], [51,1] (Byte 1) and [51,2] (One Byte Only)
Nibble High
Test Result 0 1
Explanation Connection not tested. Connection tested. Test OK. Bad test packet and no EOPS received. Bad test packet and EOPS received. Timeout.
Low
0 1 2 3
Table 15: TDM Connection Test Results (Bytes 6 to 21) for Alarm [34,3]
36.4.4 [34,7]
The additional information bytes for this alarm are defined in the following table. Byte Number Not applicable 0 1 2 3 4 5 6 7 8 9 Test-raw-data (0) Test-raw-data (1) Test-raw-data (2) Test-raw-data (3) Test-raw-data (4) Test-raw-data (5) Test-raw-data (6) Test-raw-data (7) Test-raw-data (8) Test-raw-data (9) Number of unsuccessful tunnels. Number of successful tunnels. Number of tested tunnels. Number of tunnels. Meaning Test Results Explanation Test Successful. Value 255 assigned. Test unsuccessful. Number of times a routine test has run.
718 / 778
36.4.5 [35,0]
The additional information bytes for this alarm are defined in the following table. Byte Number 0 Meaning (Intel notation - 1st byte is LSB) Origin of the problem. 00H No message. 01H Stop CMD from level 3. 02H T1 timeout (Align ready). 03H SIO received during align ready. 04H SIOS received during align ready. 05H T2 timeout (Not aligned). 06H T3 timeout (Aligned). 07H SIOS received during aligned. 08H Align Error Rate Threshold (AERM) reached. 09H LSSU received while in service. 0AH Abnormal FIB received. 0BH Abnormal BSN received. 0CH Signal unit error rate threshold reached (SUERM). 0DH T7 timeout (Acknowledge). 0EH T6 timeout (Congestion). 0FH Abnormal hardware condition Tx. 10H Abnormal hardware condition Rx. FFH Suppress. 1 Present link traffic state. 80H In traffic. 40H Traffic before unavailable. 10H Remote blocked. 00H Not in traffic. Table 17: Additional Information for Alarm [35,0]
719 / 778
36.4.6 [35,2]
The additional information bytes for this alarm are defined as shown below. Byte Number 0 and 1 2 and 3 Meaning (Intel Notation - 1st byte is LSB) DPC of the MSC (same as the alarm number). SSF of the MSC.
36.4.7 [35,3]
There are two possible layouts for the INC-REP Alarm. Alarm layout 1 occurs every hour to prevent an overload situation on the BSC. The additional information bytes for alarm layout 1 are defined in Table 19. Alarm layout 2 occurs on every alarm event. The additional information bytes for alarm layout 2 are defined in Table 20. Table 21 shows an example of additional information for Alarm [35,3]. Word Number 0 Meaning (Intel Notation - 1st byte is LSB) Value = 0: Invalid SSF received. Value = 1: Invalid DPC received. Value = 2: Invalid OPC received or Status Indicator (SI) =0: Signaling Network Management Message and Signaling Link Code (SLC) not existing or SI=1: Signaling Network Testing and Maintenance Message (SNTM) and SLC different from one SLC. 1 100H*SLC + SSF received. (SLC is described in section 15.2 of ITU-T Rec. Q704). (SSF is described in section 14.2.2 of ITU-T Rec. Q704). 2 SI received. (SI is described in section 14.2.1 of ITU-T Rec. Q704). 3 MSG_TYPE HO/H1 received. (SI=0 is described in section 15 of ITU-T Rec. Q704). (SI=1 is described in section 5 of ITU-T Rec. Q707). 4 DPC received. (DPC is described in section 15.2 of ITU-T Rec. Q704).
720 / 778
Word Number 5
Meaning (Intel Notation - 1st byte is LSB) OPC received. (OPC is described in section 15.2 of ITU-T Rec. Q704).
7 8 9
DPC expected (Value fromDLS). OPC expected (Value from DLS). SSF expected (Value from DLS).
Word Number 0 2 - 18
Meaning (Intel Notation - 1st byte is LSB) Value = 10: Changeback refused (described in ITU-T Rec. Q704). Value = FF
Data 02 00 0c 0c 01 00 11 00 31 02 0a 02 0c 00 31 02 0a 02 0c 00
Word 0 1 2 3 4 5 6 7 8 9
Value 0002H 0C0CH 0001H 0011H 0231H 020AH 000CH 0231H 020AH 000CH
Meaning invalid OPC or SLC= 0CH SSF= 0CH SI= SNTM MSG Type = SLTM* DPC received OPC received SSF received DPC expected OPC expected SSF expected
Table 21: Example of Additional Information for Alarm [35,3] * SLTM = Signaling Link Test Message
721 / 778
36.4.9 [35,4]
The additional information bytes for this alarm are defined in the table below. Byte Number 0 1 2 to 9 Meaning (Intel Notation - 1st byte is LSB) Logical Control Element identity where link resides. DTN identity where link resides. Null value.
36.4.10 [36,14]
The additional information byte for this alarm is defined in below. Byte Number 0 Meaning 0: own clock; source of alarm. 1: mate clock; source of alarm. Table 23: Additional Information for Alarm [36,14]
36.4.11 [36,15]
The additional information byte for this alarm is defined below. Byte Number 0 Meaning 0: PLL out of range. 1: clock failure. Table 24: Additional Information for Alarm [36,15]
722 / 778
36.4.12 [38,0]
The additional information byte for this alarm is defined in below. Byte Number 0 Meaning Display of the modem signals.
36.4.13 [38,2]
The additional information bytes for this alarm are defined below. Byte Number 0 1 and 2 3 and 4 Meaning Identification of the link where the problem occurred. Identification of the channel where the problem occurred. Description of the problem.
36.4.14 [42,3]
The additional information byte for this alarm is defined below. Byte Number 0 Meaning Cause of the reset procedure: 00: reset from MSC. 01: MSC communication lost or internal reason. Table 27: Additional information for Alarm [42,3]
723 / 778
36.4.15 [42,5]
The additional information bytes for this alarm are defined in the following table. Byte Number 0 Meaning Alarm cause: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 BSC reload/reboot CPRA reload/reboot BSC restart CPRA restart CPRA takeover MSC unavailable Reset from MSC Overload from MSC Timer T6 expired Timer T6 expired MSC available Timer T2 expired Overload from BTS TCUA overload DTC overload Sign link congestion.
Timer T6 indicates an MSC originated end of an overload period, the system returns to normal. Timer T2 indicates a BTS originated end of an overload period, the system returns to normal. 1-2 3-4 : : : LAC. Cell Id. : : : #FF if not defined. #FF if not defined. : For N (40) cells :
724 / 778
Meaning LAC. Cell Id. #FF if not defined. #FF if not defined.
36.4.16 [42,6]
The additional information bytes for this alarm are defined in the following table. Byte Number 0 Meaning Alarm cause: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 BSC reload/reboot CPRA reload/reboot BSC restart CPRA restart CPRA takeover MSC unavailable Reset from MSC Overload from MSC Timer T6 expired Timer T6 expired MSC available Timer T2 expired Overload from BTS TCUA overload DTC overload Sign link congestion.
Timer T6 indicates an MSC-originated end of an overload period, the system returns to normal. Timer T2 indicates a BTS-originated end of an overload period, the system returns to normal. 1-2 LAC. #FF if not defined.
725 / 778
Meaning Cell Id. Current RACH. This information gives the reason a message was sent and the new access class values. The RACH parameter is specified using 16 bits. The right hand bit corresponds to Access class 0. Value 10 for an Access class specifies emergency calls only. Value 0 for an Access class specifies that calls are authorized. #FF if not defined.
7-8
Starting RACH. This information gives the reason a message was sent and the new access class values. The RACH parameter is specified using 16 bits. The right hand bit corresponds to Access class 0. Value 10 for an Access class specifies emergency calls only. Value 0 for an Access class specifies that calls are authorized.
This information gives the reason a message was sent and the new access class values. The RACH parameter is specified using 16 bits. The right hand bit corresponds to Access class 0. Value 10 for an Access class specifies emergency calls only. Value 0 for an Access class specifies that calls are authorized. 8N-1 to 8N Starting RACH. This information gives the reason a message was sent and the new access class values. The RACH parameter is specified using 16 bits. The right hand bit corresponds to Access class 0. Value 10 for an Access class specifies emergency calls only. Value 0 for an Access class specifies that calls are authorized. Table 29: Additional Information for Alarm [42,6]
726 / 778
36.4.17 [42,9]
The additional information bytes for this alarm are defined below. Byte Number 0 1 2-3 4 5 6-13 Meaning SBL unit type SBL unit number SBL type SBL number SBL sub-number Overload level buffer pool 1-8 00 = No Overload 01 = SCCP Overload 02 = Overload Level 1 03 = Overload Level 2 14 Processor occupancy (%)
36.4.18 [42,12]
The additional information bytes for this alarm are defined below. Byte Number 0-1 2-3 : 4N-4 to 4N-3 4N-2 to 4N-1 Meaning LAC of cell CI of cell : For N number of cells lost (60 maximum) LAC of cell CI of cell
727 / 778
36.4.19 [42,13]
The additional information bytes for this alarm are defined below. Byte Number 0 Meaning Alarm cause: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 BSC reload/reboot CPRA reload/reboot BSC restart CPRA restart CPRA takeover MSC unavailable Reset from MSC Overload from MSC Timer T18 expired MSC available End of reset procedure Not applicable Not applicable Not applicable DTC overload CPR overload Signaling link congestion Not applicable Overload parameter modify Cumulative counter null
Timer T18 indicates a BSC-originated end of an overload period, the system returns to normal.
728 / 778
Meaning This information gives the reason a message was sent, and the new access class values on System Level GSM TS 04.08. The RACH parameter is specified using 16 bits. The right hand bit corresponds to Access class 0. Bit 0..9, 11..15 = 0 for an Access class means that Access control class is not barred on System Level. Bit 10 = 0 means emergency calls are allowed on System Level to all MSs. Bit 10 = 1 means emergency calls are not allowed on System Level except for MSs that belong to one of the classes between 11..15. Byte 1 contains Bits 15 - 08 Byte 2 contains Bits 07 - 00
3-4
Byte 3 = Cell Bar Access Byte 4 = Cell Bar Qualifier on System Level GSM TS 04.08 and 05.08. Cell Bar Quality Cell Bar Access Cell Selection Priority Normal Barred Low Low Status for Cell Reselection Normal Barred Normal Normal
0 0 1 1
0 1 0 1
8 9
729 / 778
Byte Number 10
: : : 5N + 1 5N + 2
: : : TRX identity. Current TEI (RSL number) BEQ number. Baseband State:
5N + 3 5N + 4
5N + 5
730 / 778
36.4.21 [43,4]
The additional information bytes for this alarm are defined in the following table. Byte Number 0 Meaning Alarm cause: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 BSC reload/reboot CPRA reload/reboot BSC restart CPRA restart CPRA takeover Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable Timer T2 expired Overload from BTS TCUA overload Not applicable Not applicable Not applicable Bar/unbar cell request Overload parameter modify TCC null
Timer T2 indicates a BSC-originated end of an overload period, the system returns to normal.
731 / 778
Meaning This information gives the reason a message was sent, and the new access class values on Cell Level (Dynamic RACH) GSM TS 04.08. The RACH parameter is specified using 16 bits. The right hand bit corresponds to Access class 0. Bit 0..9, 11..15 = 0 for an Access class means that Access control class is not barred on Cell Level. Bit 10 = 0 means emergency calls are allowed in the cell to all MSs. Bit 10 = 1 means emergency calls are not allowed in the cell except for MSs that belong to one of the classes between 11..15. Byte 1 contains Bits 15 - 08. Byte 2 contains Bits 07 - 00.
3-4
Byte 3 = Cell Bar Access Byte 4 = Cell Bar Qualifier on System Level GSM TS 04.08 and 05.08.
0 0 1 1
0 1 0 1
Table 35: Additional Information for Alarms [44,0], [44,5] and [44,6]
732 / 778
36.4.23 [44,3]
The additional information bytes for this alarm are defined below. Byte Number 0+1 2+3 4+5 Meaning Abis Error Code. File Number. Error Number (that is, Record Number).
Table 37: Additional Information for Alarms [46, 0], [46,1] and [46,3]
36.4.25 [47,9]
The additional information bytes for this alarm are defined below. Byte Number 0 +1 0 1 2 3 4 5 6 7
Meaning CBC Outgoing Connection association prematurely terminated internally. CBC O/G association prematurely terminated externally. Network connection refused. Network connection timeout. BIND parameters not populated. CBC O/G association setup timeout. CBC O/G association refused - not entitled. CBC O/G association refused - invalid Id or password.
733 / 778
36.4.26 [49,0]
The additional information bytes for this alarm are defined below. Byte Number 0+1 2+3 4+5 6+7 Meaning LAC of Cell. CI of Cell. Threshold Value 1. Threshold Value 2.
36.4.27 [49,1]
The additional information bytes for this alarm are defined as shown below. Byte Number 0+1 2+3 4+5 6+7 8+9 10 + 11 Meaning LAC of Cell. CI of Cell. Threshold Value 1. Threshold Value 2. SBL type (DTC). SBL number (DTC number).
734 / 778
36.4.29 [51,0]
The additional information bytes for this alarm are defined in the table below. Byte Number 0-1 2 Meaning Network address. Bits 3-0: Switch port number (values 0-15) on which the alarm was generated. Bits 7-4: Reason for alarm. 0= An unsynchronized write access occurred within a switch element internal hardware logic. This caused a mismatch generating a transient write violation alarm. 1= Loss of synchronization with the internal 4 Mbit/s signal. A transient loss-of-sync alarm has been generated. Table 42: Additional Information for Alarm [51,0]
735 / 778
36.4.30 [51,1]
The additional information bytes for this alarm are defined in Tables 43, 44, 45 and 46. The blocks of additional information must be considered together in order to analyze the alarm information correctly. 1. The first block of additional information indicates the network address of switch, the link states and, if required, the necessary fault reason. 2. The subsequent blocks of additional information indicate the test results of the link. For every failed test, a block of additional data is filled in. The relationship between the Interface Address (IAD) / Network Address (NA) (Hex) and the RIT is given in Table 49 for BSC racks 1, 2 and 3. The table contains the relationships for all completely equipped racks and the RIT position in the rack, shelf and slot. Byte Number 0-1 2 - 17
Meaning Network Address. Bits 3-0: Fault type 0= No Reason. 1= Write Violation. Several unsynchronized write accesses occurred within a switch elements internal hardware logic. This caused a mismatch, generating a transient write violation alarm. 2= Write Violation Overflow. Several unsynchronized write accesses occurred within a switch elements internal hardware logic. This caused a mismatch, generating a write violation overflow alarm. 3= Loss of Sync. The switch detected a loss of synchronization with the internal 4 Mbit/s signal. All calls through the switch are lost. An alarm is sent for the switch indicating a permanent loss of synchronization. 4= Loss of Sync Overflow. The switch detected a large number of transient losses of synchronization with the internal 4 Mbit/s signal within a specified time frame. 5= HW Fault. Hardware failure detected. 6= Init-Ini-Fail. A link initialization failed during an initialization action on a switch SBL. 7= Operator Request. An operator request has failed. Bits 7-4: Link state 0= In Service 1= Out of service 2= Autonomous out of service 3= Undefined 4= Faulty In Service 5= Alarm shutoff 6= Not equipped link -
18 - 19
Table 43: Additional Information for Alarm [51,1] - First Block There are 16 ports. Byte 2 represents Port 0, Byte 3 represents Port 1, and so on.
736 / 778
If additional blocks of information are displayed, each one indicates the results of a failed link test. Refer to the table below. Byte Number 0 1 2-3 4 - 19 Meaning Test Segment Test-Fault-type Link-Network-Address TDM-Test-Results Descriptions See Test-Segment Table 13. See Test-Fault-Type Table 14. See Table 45 for TDM Test Result Byte descriptions.
Table 44: Additional Information for Alarm [51,1] - Subsequent Blocks If Test Segment and Test-Fault-Type are both at 0, the test did not execute or a timeout was received. In this case, the TDM-Test-Results values will be set to #FF. Byte Number 4 Test Results Explanation Test Result of TDM connection between port 0 and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port 1 and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port 2 and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port 3 and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port 4 and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port 5 and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port 6 and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port 7 and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port 8 and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port 9 and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port A and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port B and the port given by the Link Network Address. See Table 46 for detailed TDM test results.
10
11
12
13
14
15
737 / 778
Byte Number 16
Test Results Explanation Test Result of TDM connection between port C and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port D and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port E and the port given by the Link Network Address. See Table 46 for detailed TDM test results. Test Result of TDM connection between port F and the port given by the Link Network Address. See Table 46 for detailed TDM test results.
17
18
19
Table 45: TDM Test Result Byte Descriptions for Alarm [51,1] and [51,2]
Nibble High
Test Result 0 1
Explanation Connection not tested. Connection tested. Test OK. Bad test packet and no EOPS received. Bad test packet and EOPS received. Timeout.
Low
0 1 2 3
Table 46: Detailed TDM Test Results for Alarm [51,1] and [51,2] The TDM is the internal multiplex bus of the switch. The TDM test makes a sort of loop between the port under test and all the equipped ports of the switch. For example: If port 2 is under test, a loop will be made between port 2 -> port 0 port 2 -> port 1 ... port 2 -> port F. The relationship between the Interface Address (IAD) / Network Address (NA) (Hex) and the RIT is given in Table 49 for BSC racks 1, 2 and 3. The table contains the relationships for all completely equipped racks and the RIT position in the rack, shelf and slot.
738 / 778
36.4.31 [51,2]
The additional information bytes for this alarm are defined below. Test Results Test Segment Test Fault Type Test Raw Data Byte Number one byte only one byte only 0+1 2+3 4 - 19 Switch Network Address. Link Network Address. TDM Meaning Byte Description See Table 13. See Table 14. For relation of Switch Network Address to board, see Table 49. Associated port is under test. For TDM Test Result Byte description, see Table 45. Table 47: Additional Information for Alarm [51,2]
Test Result Test Segment Test Fault Type Test Raw Data
Unsuccessful (some failures) 13 60 H00 H10 H10 H10 H45 H10 H10 H10 H00 H12 H10 H10 H40 H10 H10 H10 H13 H10 H10 H10
Unsuccessful (tests not executed) 0 0 H00 HFF HFF HFF H45 HFF HFF HFF H00 HFF HFF HFF H40 HFF HFF HFF HFF HFF HFF HFF
Table 48: Example for an Unsuccessful Test Results Format for Link/Switch If the Test Segment and the Test-Fault-Type are both at 0, the test did not execute or a timeout was received. In this case, the TDM-Test -Results values will be set to #FF. The relationship between the Interface Address (IAD) (Hex) / Network Address (NA) and the RIT is given in Table 49 for BSC racks 1, 2 and 3. The table contains the relationships for all completely equipped racks and the RIT position in the rack, shelf and slot.
739 / 778
For detailed information about BSC configurations, refer to the (BSC Cabinet and Subrack Description). IAD/NA (Hex) 0000 0000 0001 0002 0003 0004 0005 0008 0009 000A 000B 000C 000D 000E 000F 0010 0010 0011 0012 0013 0014 0015 0016 0017 0020 0020 RIT (Type) CPRCAB SWCHAB CPRCAB CPRCAC CPRCAC CPRCAA CPRCAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA TCUC SWCHAB TCUC TCUC TCUC TCUC TCUC TCUC TCUC SWCHAB DTCC Position (Rack.Shelf.Slot) 1.8.17 1.8.37 1.8.19 1.8.21 1.8.25 1.8.29 1.8.31 1.7.1 1.7.3 1.7.5 1.7.7 1.7.9 1.7.11 1.7.13 1.7.15 1.7.29 1.7.45 1.7.31 1.7.33 1.7.35 1.7.37 1.7.39 1.7.41 1.7.43 1.6.9 1.6.13
740 / 778
IAD/NA (Hex) 0021 0022 0023 0024 0025 0026 0027 0030 0030 0031 0032 0033 0034 0035 0036 0037 0040 0050 0060 0070 0088 0089 008A 008B 008C 008D 008E 008F
RIT (Type) DTCC DTCC DTCC DTCC DTCC DTCC DTCC SWCHAB DTCC DTCC DTCC DTCC DTCC DTCC DTCC DTCC SWCHAB SWCHAB SWCHAB SWCHAB SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA
Position (Rack.Shelf.Slot) 1.6.15 1.6.17 1.6.19 1.6.23 1.6.25 1.6.27 1.6.29 1.6.41 1.6.45 1.6.47 1.6.49 1.6.51 1.6.55 1.6.57 1.6.59 1.6.61 1.8.39 1.7.47 1.6.11 1.6.43 1.8.45 1.8.47 1.8.49 1.8.51 1.8.53 1.8.55 1.8.57 1.8.59
741 / 778
IAD/NA (Hex) 0098 0099 009A 009B 009C 009D 009E 009F 00A8 00A9 00AA 00AB 00AC 00AD 00AE 00AF 00B8 00B9 00BA 00BB 00BC 00BD 00BE 00BF 00C8 00C9 00CA 00CB
RIT (Type) SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA
Position (Rack.Shelf.Slot) 1.2.1 1.2.3 1.2.5 1.2.7 1.2.9 1.2.11 1.2.13 1.2.15 1.2.21 1.2.23 1.2.25 1.2.27 1.2.29 1.2.31 1.2.33 1.2.35 1.2.41 1.2.43 1.2.45 1.2.47 1.2.49 1.2.51 1.2.53 1.2.55 2.8.45 2.8.47 2.8.49 2.8.51
742 / 778
IAD/NA (Hex) 00CC 00CD 00CE 00CF 00D8 00D9 00DA 00DB 00DC 00DD 00DE 00DF 00E8 00E9 00EA 00EB 00EC 00ED 00EE 00EF 00F8 00F9 00FA 00FB 00FC 00FD 00FE 00FF
RIT (Type) SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA
Position (Rack.Shelf.Slot) 2.8.53 2.8.55 2.8.57 2.8.59 2.2.1 2.2.3 2.2.5 2.2.7 2.2.9 2.2.11 2.2.13 2.2.15 2.2.21 2.2.23 2.2.25 2.2.27 2.2.29 2.2.31 2.2.33 2.2.35 2.2.41 2.2.43 2.2.45 2.2.47 2.2.49 2.2.51 2.2.53 2.2.55
743 / 778
IAD/NA (Hex) 0100 0100 0101 0102 0103 0104 0105 0106 0107 0108 0109 010A 010B 010C 010D 010E 010F 0110 0110 0111 0112 0113 0114 0115 0116 0117 0120 0120
RIT (Type) SWCHAB TCUC TCUC TCUC TCUC TCUC TCUC TCUC TCUC SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA TCUC SWCHAB TCUC TCUC TCUC TCUC TCUC TCUC TCUC SWCHAB DTCC
Position (Rack.Shelf.Slot) 1.4.25 1.4.9 1.4.11 1.4.13 1.4.15 1.4.17 1.4.19 1.4.21 1.4.23 1.6.5 1.6.7 1.6.37 1.6.39 1.3.5 1.3.7 1.3.37 1.3.39 1.4.41 1.4.57 1.4.43 1.4.45 1.4.47 1.4.49 1.4.51 1.4.53 1.4.55 1.3.9 1.3.13
744 / 778
IAD/NA (Hex) 0121 0122 0123 0124 0125 0126 0127 0130 0130 0131 0132 0133 0134 0135 0136 0137 0140 0150 0160 0170 0200 0200 0201 0202 0203 0204 0205 0206
RIT (Type) DTCC DTCC DTCC DTCC DTCC DTCC DTCC SWCHAB TCUC TCUC TCUC TCUC TCUC TCUC TCUC TCUC SWCHAB SWCHAB SWCHAB SWCHAB TCUC SWCHAB TCUC TCUC TCUC TCUC TCUC TCUC
Position (Rack.Shelf.Slot) 1.3.15 1.3.17 1.3.19 1.3.23 1.3.25 1.3.27 1.3.29 1.3.41 1.3.45 1.3.47 1.3.49 1.3.51 1.3.53 1.3.55 1.3.57 1.3.59 1.4.27 1.4.59 1.3.11 1.3.43 2.8.17 2.8.37 2.8.19 2.8.21 2.8.25 2.8.29 2.8.31 2.8.33
745 / 778
IAD/NA (Hex) 0207 0208 0209 020A 020B 020C 020D 020E 020F 0210 0210 0211 0212 0213 0214 0215 0216 0217 0220 0220 0221 0222 0223 0224 0225 0226 0227 0230
RIT (Type) TCUC SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA TCUC SWCHAB TCUC TCUC TCUC TCUC TCUC TCUC TCUC SWCHAB DTCC DTCC DTCC DTCC DTCC DTCC DTCC DTCC SWCHAB
Position (Rack.Shelf.Slot) 2.8.35 2.7.1 2.7.3 2.7.5 2.7.7 2.7.9 2.7.11 2.7.13 2.7.15 2.7.29 2.7.45 2.7.31 2.7.33 2.7.35 2.7.37 2.7.39 2.7.41 2.7.43 2.6.9 2.6.13 2.6.15 2.6.17 2.6.19 2.6.23 2.6.25 2.6.27 2.6.29 2.6.41
746 / 778
IAD/NA (Hex) 0230 0231 0232 0233 0234 0235 0236 0237 0240 0250 0260 0270 0300 0300 0301 0302 0303 0304 0305 0306 0307 0308 0309 030A 030B 030C 030D 030E
RIT (Type) DTCC DTCC DTCC DTCC DTCC DTCC DTCC DTCC SWCHAB SWCHAB SWCHAB SWCHAB TCUC SWCHAB TCUC TCUC TCUC TCUC TCUC TCUC TCUC SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA
Position (Rack.Shelf.Slot) 2.6.45 2.6.47 2.6.49 2.6.51 2.6.55 2.6.57 2.6.59 2.6.61 2.8.39 2.7.47 2.6.11 2.6.43 2.4.9 2.4.25 2.4.11 2.4.13 2.4.15 2.4.17 2.4.19 2.4.21 2.4.23 2.6.5 2.6.7 2.6.37 2.6.39 2.3.5 2.3.7 2.3.37
747 / 778
IAD/NA (Hex) 030F 0310 0310 0311 0312 0313 0314 0315 0316 0317 0320 0320 0321 0322 0323 0324 0325 0326 0327 0330 0330 0331 0332 0333 0334 0335 0336 0337
RIT (Type) SWCHAA SWCHAB TCUC TCUC TCUC TCUC TCUC TCUC TCUC TCUC SWCHAB DTCC DTCC DTCC DTCC DTCC DTCC DTCC DTCC SWCHAB TCUC TCUC TCUC TCUC TCUC TCUC TCUC TCUC
Position (Rack.Shelf.Slot) 2.3.39 2.4.57 2.4.41 2.4.43 2.4.45 2.4.47 2.4.49 2.4.51 2.4.53 2.4.55 2.3.9 2.3.13 2.3.15 2.3.17 2.3.19 2.3.23 2.3.25 2.3.27 2.3.29 2.3.41 2.3.45 2.3.47 2.3.49 2.3.51 2.3.53 2.3.55 2.3.57 2.3.59
748 / 778
IAD/NA (Hex) 0340 0350 0360 0370 0400 0400 0401 0402 0403 0404 0405 0406 0407 0408 0409 040A 040B 040C 040D 040E 040F 0410 0410 0411 0412 0413 0414 0415
RIT (Type) SWCHAB SWCHAB SWCHAB SWCHAB SWCHAB TCUC TCUC TCUC TCUC TCUC TCUC TCUC TCUC SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAB TCUC TCUC TCUC TCUC TCUC TCUC
Position (Rack.Shelf.Slot) 2.4.27 2.4.59 2.3.11 2.3.43 3.8.37 3.8.17 3.8.19 3.8.21 3.8.25 3.8.29 3.8.31 3.8.33 3.8.35 3.7.1 3.7.3 3.7.5 3.7.7 3.7.9 3.7.11 3.7.13 3.7.15 3.7.45 3.7.29 3.7.31 3.7.33 3.7.35 3.7.37 3.7.39
749 / 778
IAD/NA (Hex) 0416 0417 0420 0420 0421 0422 0423 0424 0425 0426 0427 0430 0430 0431 0432 0433 0434 0435 0436 0437 0440 0450 0460 0470 0500 0500 0501 0502
RIT (Type) TCUC TCUC SWCHAB DTCC DTCC DTCC DTCC DTCC DTCC DTCC DTCC SWCHAB DTCC DTCC DTCC DTCC DTCC DTCC DTCC DTCC SWCHAB SWCHAB SWCHAB SWCHAB TCUC SWCHAB TCUC TCUC
Position (Rack.Shelf.Slot) 3.7.41 3.7.43 3.6.9 3.6.13 3.6.15 3.6.17 3.6.19 3.6.23 3.6.25 3.6.27 3.6.29 3.6.41 3.6.45 3.6.47 3.6.49 3.6.51 3.6.55 3.6.57 3.6.59 3.6.61 3.8.39 3.7.47 3.6.11 3.6.43 3.4.9 3.4.25 3.4.11 3.4.13
750 / 778
IAD/NA (Hex) 0503 0504 0505 0506 0507 0508 0509 050A 050B 050C 050D 050E 050F 0510 0510 0511 0512 0513 0514 0515 0516 0517 0520 0520 0521 0522 0523 0524
RIT (Type) TCUC TCUC TCUC TCUC TCUC SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA SWCHAA TCUC SWCHAB TCUC TCUC TCUC TCUC TCUC TCUC TCUC SWCHAB DTCC DTCC DTCC DTCC DTCC
Position (Rack.Shelf.Slot) 3.4.15 3.4.17 3.4.19 3.4.21 3.4.23 3.6.5 3.6.7 3.6.37 3.6.39 3.3.5 3.3.7 3.3.37 3.3.39 3.4.41 3.4.57 3.4.43 3.4.45 3.4.47 3.4.49 3.4.51 3.4.53 3.4.55 3.3.9 3.3.13 3.3.15 3.3.17 3.3.19 3.3.23
751 / 778
IAD/NA (Hex) 0525 0526 0527 0530 0530 0531 0532 0533 0534 0535 0536 0537 0540 0550 0560 0570
RIT (Type) DTCC DTCC DTCC SWCHAB TCUC TCUC TCUC TCUC TCUC TCUC TCUC TCUC SWCHAB SWCHAB SWCHAB SWCHAB
Position (Rack.Shelf.Slot) 3.3.25 3.3.27 3.3.29 3.3.41 3.3.45 3.3.47 3.3.49 3.3.51 3.3.53 3.3.55 3.3.57 3.3.59 3.4.27 3.4.59 3.3.11 3.3.43
752 / 778
36.4.32 [51,3]
The additional information bytes for this alarm are defined in the following table. These bytes indicate the case when testing runs successfully. Byte Number 0 Meaning TEST-RAW-DATA (0) TEST-RAW-DATA (1) TEST-RAW-DATA (2) TEST-RAW-DATA (3) TEST-RAW-DATA (4) TEST-RAW-DATA (5) TEST-RAW-DATA (6) TEST-RAW-DATA (7) TEST-RAW-DATA (8) TEST-RAW-DATA (9) Number of unsuccessful tunnels. Number of successful tunnels. Number of tested tunnels. Number of tunnels. Test Results Explanation Value 255 assigned. Number of times a routine test has run.
Table 50: Additional Information for Alarm [51,3] In the unsuccessful cases, the decoding of the byte information is described in the Link/Switch Test Results section of the Operations & Maintenance Reference Guide.
753 / 778
Table 51: Additional Information for Alarms [52,1], [52,5] and [52,7]
Table 52: Additional Information for Alarms [53,0], [53,1], [53,3], [53,4], [53,6] and [53,7]
36.4.35 [53,2]
The additional information bytes for this alarm is defined as follows. Byte Number 0-1 Value 0 Meaning DMA overrun detected by the Broadcast Control Unit in processors. DMA underrun detected by the BCU in processors.
754 / 778
36.4.37 [101,8]
The additional information bytes for this alarms are defined below. Byte Number 1 2 3 4 Byte... n n+1 n+2 n+3 Byte... Remark: locked E1 are not reported. Table 55: Additional Information for Alarm [101,8] 251 Tag for ATER-HWAY-TP. Number of faulty ATER-HWAY-TP. ATER-HWAY-TP number of the first faulty Ater. ATER-HWAY-TP number of the second faulty Ater. Value 250 Meaning Tag for ABIS-HWAY-TP. Number of faulty ABIS-HWAY-TP. ABIS-HWAY-TP number of the first faulty Abis ABIS-HWAY-TP number of the second faulty Abis Byte
Note:
755 / 778
36.5 TC Alarms
This section describes the additional information provided by other TC alarms.
36.5.2 [70,219]
The Error is defined below. NAME Recovery Level Error Type Filename SIZE 1 DESCRIPTION The action taken by the TSC to recover from the error (RESET/RESTART/REPORT/NONE). The actual error type which is reported by the TSC modules. Zero-terminated string that gives the filename of the module which reported the error. Line number in the file where the error was risen. Parameter with extra debugging information. Parameter with extra debugging information.
1 20
2 4 4 4
756 / 778
ASMB
00 -
ASMC
00 -
Alcatel TRCU TC G2
TC-ADAPT
ATBX
00 -
757 / 778
Autonomous/Operator
This parameter indicates if the reset occurs because of an operator request or autonomously. Range 60...80 is MT120 specific. The reset structure depends on the hardware type. The hardware type MT120 is mapped onto a range of Error Type from 60 to 80. All the error types which do not belong to this set have the following format, see Table 61.
Error Type
Program identity of the process which reports the alarm. User Data Segment.
758 / 778
Power-on
All memory which belongs to the application is cleared, is set to 00. The startup is done with the default configuration. A reset is always triggered. In the reset sequence, the last correct software (1 of 3 possibilities) is activated. All memory is cleared. The configuration is saved into flash memory otherwise. If corrupted, the default configuration is applied.
61
Reset
The HW watchdog timer has expired caused by a loop somewhere in the code.
62
Reset/Restart An external or internal scenario has failed due to a timeout expiration. Reset/Restart This error occurs, when there is no memory free for the applications. Reset/Restart An exception has occurred, a detailed list is given in the additional information, see Table 62. Reset/Restart An error has occurred in the generated code. Reset/Restart An error has occurred in the DSP. Reset A hardware error has been detected by the auto-tests.
A reset/restart is triggered, See Table the OTP comes back to an 62 operational state using the saved configuration. A buffer is built after processor reset/restart.
63
OTP exception
64
65
DSP post-mortem
66
67
759 / 778
MID Reference
2 2
Scenario id
Origin of action
Task name in ASCII which has caused the auto-restart/auto-reset. 0 1 2 Message buffer Memory allocation Memory re-allocation
Memory region
4 60
The requested memory size which could not be served. The information is taken from the stack.
760 / 778
Size 4
Description Task name in ASCII which has caused the auto-restart/auto-reset. 01 02 03 04 06 07 08 OD OE 10 13 14 System Reset Machine Reset Data Storage Instruction storage Alignment Program Floating point unavailable Trace Floating Point assist Software emulation Instruction TLB error Data TLB error
Interrupt entry
4 4 1
See MPC860 UMD, Interrupts section, only 3 bits are reported. bit0 bit1 bit2 MRS.IP MRS.ME MRS.LE
DSISR
See MPC860 UMD, Interrupts section, only 3 bits are reported. bit0 bit1 bit2 DSISR BIT 1 DSISR BIT 4 DSISR BIT 6
4 4 60
761 / 778
Size 4
Description Task name in ASCII which has caused the auto-restart/auto-reset. Link register, it gives the program counter in SDT-generated code where the error has occurred. Signal value (in case of an error on a signal). State of the autonon when the signal was received. The post-mortem value. Additional Information. Non-fatal or fatal error detected during auto-tests. Faulty processor. Detailed step in DSP autotest. Faulty test number -
IR
Signal State DSP post-mortem Error More MT120 auto-test failure Severity Entity Status Test
4 4 4 N 1 1 1 1
Error Length
1 1
Info
Additional information
762 / 778
763 / 778
764 / 778
765 / 778
FIT
FLT
OPR
ACH
IT
FLT/FOS
A-PCM-TP
IT
FIT
FLT/EF
BATTERY
IT FLT
766 / 778
Impact on system The rack broadcast bus is distributed to the associated CEs. Either there is a degradation for the full rack, or there is a failure for one or 2 CE. This state has no telecom impact if the other BC-RACK-BUS is IT. This branch of the broadcast bus is not working anymore. This state has no telecom impact if the other BC-RACK-BUS is IT. The rack broadcast bus (BC_RACK_BUS SBL) is disabled by the operator. The system broadcast bus is distributed correctly to all racks. The system broadcast bus (BC_SYS_BUS SBL) is disabled by the Operator. The BSC is working correctly. When two CLK-REP of the same rack (rack not containing the BCLA-SYS-boards) are failing. When the BSC is running on a local clock. Loss of both broadcast buses in the BSC either only at a CE level, or at rack level, or at system level. LAC paging messages do not work except for the first 3 cells of the LAC, thus preventing Mobile terminating calls for the other cells, GPRS reset procedure do not work anymore. Processors cannot be preloaded, thus lengthening outages in SW replacement procedure. RMS measurements are no more started nor stopped. A high number of BSC processors have reported DMA problems.
FLT
OPR
BC-SYS-BUS
IT OPR
BSC
IT FIT
767 / 778
SBL state IT
Impact on system The BIUA board, which multiplexes BS trunks onto an ABIS HWAY-TP at BSC side, is functioning correctly. There is a degradation in the service provided by the BIUA board, which multiplexes BS trunks onto an ABIS HWAY-TP at BSC side. The BSC transmission board (BUIA), which multiplexes BS trunks onto an ABIS HWAY-TP at BSC side, is lost. It cannot be programmed or accessed. The BIUA board, which multiplexes BS trunks onto an ABIS HWAY-TP at BSC side, is disabled. This state has no impact on the telecom functions of the board, only on the O&M part.
FIT
FLT/FOS
OPR
BSS-TEL
IT
Gain of telecom availability of all the cells of a BSC from BSC point of view. Loss of telecom availability of all cells of a BSC from the BSC point of view. Degradation of telecom availability of all cells of a BSC from the BSC point of view. Loss of telecom availability of all cells of a BSC from the BSC point of view. The BTS-BIE, which demultiplexes Abis channels from an ABIS HWAY-TP at BTS side, is functioning correctly. There is a degradation in the service provided by BTS-BIE board, which demultiplexes Abis channels from an ABIS HWAY-TP at BTS side. The BTS-BIE board, which demultiplexes Abis channels from an ABIS HWAY-TP at BTS side, is lost. It cannot be programmed or accessed. This state has no impact on the telecom functions of the board, only on the O&M part. Gain of full O&M availability of the cell from the BSC point of view. Loss of O&M availability of the cell from the BSC point of view. If parameters must be changed the cell mapped on this BTS become out of service. Loss of O&M availability of the cell from the BSC point of view. If parameters must be changed the cell mapped on this BTS become out of service. Gain of telecom availability of the extra Abis TS
FLT
FIT
OPR
BTS-ADAPT
IT
FIT
FLT/FOS
OPR
BTS-OM
IT FLT/FOS
OPR
BTS-POOL
IT
768 / 778
Impact on system Gain of telecom availability of the cell from the BSC point of view. Loss of telecom availability of the cell from the BSC point of view. Degradation of telecom availability of the cell from the BSC point of view. Loss of telecom availability of the cell from the BSC point of view. The clock generator works correctly. The clock has detected the loss of its local clock. There is no impact on the service. If only one CLK-GEN is unavailable, there is no impact on the service. BSC will use the clock provided by the other CLK-GEN. Clock generation is disabled by the operator. The clock repeater works correctly. The clock repeater loses either System Clock A or System Clock B. A failure is detected in the BCLA-RACK board. If only one CLK-REP is unavailable, there is no impact on the service. If no CLK-REP is available no Clock reference is repeated. The clock repeater is disabled by the operator. The convertor is working correctly. There is no impact on traffic because the power supplies are in parallel. The CPR is working correctly. The standby CPR will become the master CPR and takes over all functions. The standby S-CPR will become the master System CPR and takes over all functions. SW/DB replacement actions will not be allowed. The standby O-CPR will become the master O-CPR and takes over all functions. If the old master was carrying the X.25 link with the OMC-R, this link is lost and scheduled performance measurement jobs are not reactivated in due time. The processor has reported a high number of DMA problems.
FLT
CPR
IT OPR
S-CPR Duplex
FLT/FOS
O-CPR DUPLEX
FLT/FOS
S-CPR/O-CPR
FIT
769 / 778
Impact on system The broadcast processor is not broadcasting. The broadcast processor is not broadcasting. The BC_CPR SBL is not defined in the BSC database.
DTC
Speech or data connections to the MSC or MFS: IT These connections are re-established. New connections are possible. Change back of the SCCP connections on the N7 handled by the DTCs occurs. These connections on the associated PCM (1/4 of an Atermux) are lost. No new connections are possible. Depending on the DTC assignation, other function can be affected: If the DTC carries a TCH resource manager, there is no extra effect on the calls. If the DTC carries N7, the SCCP connections are aborted after some time. N7 Signaling will be handled by other DTCs (=changeover). Degradation can happen if the remaining capacity is too small. If DTC carries BSSAP/GPRSAP, all concerned SCCP connections are lost. If the DTC manages a GSL, as long as there are other GSL for the corresponding GPU, there is no loss of transactions (degradation can happen if the remaining capacity is too small). FIT OPR The processor has reported a high number of DMA problems. These connections on the associated PCM (1/4 of an Atermux) are lost. No new connections are possible. Depending on the DTC assignation, other function can be affected: If the DTC carries a TCH resource manager, there is no extra effect on the calls. If the DTC carries N7, the SCCP connections are aborted after some time. N7 Signaling will be handled by other DTCs (=changeover). Degradation can happen if the remaining capacity is too small. If DTC carries BSSAP/GPRSAP, all concerned SCCP connections are lost. If the DTC manages a GSL, as long as there are other GSL for the corresponding GPU, there is no loss of transactions (degradation can happen if the remaining capacity is too small).
FLT/FOS
770 / 778
Impact on system GPRS signalisation is working correctly. GPRS signalisation is not working correctly. N7 Signaling can now be handled by the N7 link (=changeback). N7 Signaling will be handled by another N7 link (=changeover). N7 Signaling will be handled by another N7 link (=changeover). Communication with the OMU is re-established. Can have an impact on the BTS_O&M state. Causes loss of communication with the OMU. Will have an impact on the BTS_O&M state, depending on the kind of transaction started by the BSC when the OML is down. Communication with the TRE/TRX is established. Gain in telecommunication resource allocation capability on the BTS. The RSL SBL may cause loss of communication with the Frame Unit. Leads to a reduced telecommunication resource allocation capability on the BTS. The RSL SBL may cause loss of communication with the Frame Unit. Leads to a reduced telecommunication resource allocation capability on the BTS. The multiplexing on the ATER side is functioning correctly. The multiplexing on the ATER side is degraded. The multiplexing board ASMC (It sub-multiplexes A-trunks at the Transcoder)/ASMB (It sub-multiplexes A-trunks at the BSC) is not functioning correctly. Complete multiplexing on the Ater side is not being done. The multiplexing board ASMC/ASMB are disabled. Complete multiplexing on the Ater is not being done. All links associated with the Switch are IT. All links associated with the switch can be used. Causes loss of speech or data connections over this switch. This switch can no longer be used. More than 51% of links associated to Switch are FLT. Causes loss of some speech or data connections over this switch. This switch can still be used. Less than 51% of links associated to Switch are FLT.
N7
IT FLT/EF OPR
OML
IT
FLT
RSL
IT
OPR
FLT
SM-ADAPT
IT FIT FLT/FOS
OPR
SWITCH
IT
FLT
FIT
771 / 778
SBL state IT
Impact on system The link adaption between the MSC and the Submultiplexer is functioning correctly. The link adaption between the MSC and the Submultiplexer is degraded. The link adaption between the MSC and the Submultiplexer is not functioning correctly. The link adaption between the MSC and the Submultiplexer is disabled. On-going calls are not lost, no new calls can be initiated. Communication with TRE/TRX and/or OMU and/or TSC is established. See RSL and/or OML and/or TSL. Causes loss of communication with Frame Unit(s) and/or OMU and/or TSC. See RSL and/or OML and/or TSL. Causes loss of communication with Frame Unit(s) and/or OMU and/or TSC. See RSL and/or OML and/or TSL. The processor has reported a high number of DMA problems The A-interface channels managed by the BSC are functioning correctly. The A-interface channels managed by the BSC are degraded. The A-interface channels managed by the concerned TC-16 SBL are not functioning correctly. The A-interface channels managed by the concerned TC-16 SBL are disabled. Gain of transmission O&M availability from the BSC point of view. Loss of transmission O&M availability from the BSC point of view. The transmission processor controlling transmission O&M is functioning correctly. The transmission processor controlling transmission O&M is degraded. Connection between the BSC and a local terminal or OMC-R is established. If there is no X.25 redundancy, causes loss of connection between the BSC and a local terminal or OMC-R. If there is no X.25 redundancy, causes loss of connection between the BSC and a local terminal or OMC-R.
FIT
FLT
OPR
TCU
IT
FLT/FOS
OPR
FIT TC-16 IT
FIT FLT
OPR
TR-OM
IT FLT
TSC
IT
FIT
X.25
IT
FLT
OPR
772 / 778
FIT
FLT
OPR
ACH
IT
FLT/FOS
A-PCM-TP
IT
FIT
FLT/EF
773 / 778
Impact on system The BSC is working correctly. There is a persistent problem on the N7 links. New calls can not be established.
BSS-TEL
IT
Gain of telecom availability of all the cells of a BSC from BSC point of view. Loss of telecom availability of all cells of a BSC from the BSC point of view. Degradation of telecom availability of all cells of a BSC from the BSC point of view. Loss of telecom availability of all cells of a BSC from the BSC point of view. The BTS-BIE, which demultiplexes Abis channels from an ABIS HWAY-TP at BTS side, is functioning correctly.
FLT
FIT
OPR
BTS-ADAPT
FIT
There is a degradation in the service provided by BTS-BIE board, which demultiplexes Abis channels from an ABIS HWAY-TP at BTS side. The BTS-BIE board, which demultiplexes Abis channels from an ABIS HWAY-TP at BTS side, is lost. It cannot be programmed or accessed. This state has no impact on the telecom functions of the board, only on the O&M part. Gain of full O&M availability of the cell from the BSC point of view. Loss of O&M availability of the cell from the BSC point of view. If parameters must be changed the cell mapped on this BTS become out of service. Loss of O&M availability of the cell from the BSC point of view. If parameters must be changed the cell mapped on this BTS become out of service. Gain of telecom availability of the extra Abis TS
FLT/FOS
OPR
BTS-OM
IT FLT/FOS
OPR
BTS-POOL
IT
774 / 778
Impact on system Gain of telecom availability of the cell from the BSC point of view. Loss of telecom availability of the cell from the BSC point of view. Degradation of telecom availability of the cell from the BSC point of view. Loss of telecom availability of the cell from the BSC point of view. The board is working correctly. The board is not working correctly. The standby board will become active and takes over all the functions. In case there is no more CP-HW operational a part of the cells and a part of interfaces (Abis, Ater) will be lost. The board is disabled by the operator. The standby board will become active and takes over all the functions. The application software works correctly. The application software does not work correctly. This corresponds to the double fault seen on CP-HW, a part of the cells and a part of interfaces (Abis, Ater) would be lost The CPR is working correctly. All stable calls are not affected. Due to TCH-RM takeover some signaling messages can be lost which can affect some transactions in progress (call setup or handovers). Some CMISE exchanges or file transfers with OMC-R may be interrupted. Anew instance of the process takes over all functions.
OPR
CP-LOG
IT FLT
CPR
IT FLT
775 / 778
SBL state
Impact on system
Speech or data connections to the MSC or MFS: IT These connections are re-established. New connections are possible. Change back of the SCCP connections on the N7 handled by the DTCs occurs. These connections on the associated PCM (1/4 of an Atermux) are lost. No new connections are possible. Depending on the DTC assignation, other function can be affected: If the DTC carries a TCH resource manager, there is no extra effect on the calls. If the DTC carries N7, the SCCP connections are aborted after some time. N7 Signaling will be handled by other DTCs (=changeover). Degradation can happen if the remaining capacity is too small. If DTC carries BSSAP/GPRSAP, all concerned SCCP connections are lost. If the DTC manages a GSL, as long as there are other GSL for the corresponding GPU, there is no loss of transactions (degradation can happen if the remaining capacity is too small).
FLT/FOS
ECU
IT
Concentration unit for all E1 links collected by MUX board is working correctly. Concentration unit for all E1 links collected by MUX board is not working correctly of the MUX board lost the connection with the OMCP board. The standby board will become active and takes over all the functions. Concentration unit for all E1 links collected by LIU board is working correctly. One 16 E1 serial link failed. Concentration unit for all E1 links collected by LIU board is not working correctly. All E1 connected on the LIU are lost. Fan unit is working correctly. Fan unit is not working correctly. GPRS signalisation is working correctly. GPRS signalisation is not working correctly. If there are not enough resources available data transactions can fail due due to signalling links congestion.
FLT
ETU
IT
FIT FLT
FAN
IT FLT
GSL
IT FLT
776 / 778
SBL name N7
Impact on system N7 Signaling can now be handled by the N7 link (=changeback). N7 Signaling will be handled by another N7 link (=changeover). If there are not enough resources available calls can fail due due to signalling links congestion. N7 Signaling will be handled by another N7 link (=changeover). Communication with the OMU is re-established. Can have an impact on the BTS_O&M state. Causes loss of communication with the OMU. Will have an impact on the BTS_O&M state, depending on the kind of transaction started by the BSC when the OML is down. The power entry module is working correctly. The power entry module is not working correctly. There is no impact on traffic because the power supplies are in parallel. Communication with the TRE/TRX is established. Gain in telecommunication resource allocation capability on the BTS. The RSL SBL may cause loss of communication with the Frame Unit. Leads to a reduced telecommunication resource allocation capability on the BTS. The RSL SBL may cause loss of communication with the Frame Unit. Leads to a reduced telecommunication resource allocation capability on the BTS. The SMM board is working correctly. The SMM board is not working correctly. The standby board will become active and takes over all the functions. The SMM board was disabled by the operator. The standby board will become active and takes over all the functions. The SSW board is working correctly. The SSW board is not working correctly. The standby board will become active and takes over all the functions. The SSW board was disabled by the operator. The standby board will become active and takes over all the functions. If the SSW supports the connection to the external alarm box the connection is lost and the external alarms will not be supervised.
OPR OML IT
FLT
PEM
IT FLT
RSL
IT
OPR
FLT
SMM
IT FLT
OPR
SSW-HW
IT FLT
OPR
777 / 778
SBL state IT
Impact on system The link adaption between the MSC and the Submultiplexer is functioning correctly. The link adaption between the MSC and the Submultiplexer is degraded. The link adaption between the MSC and the Submultiplexer is not functioning correctly. The link adaption between the MSC and the Submultiplexer is disabled. On-going calls are not lost, no new calls can be initiated. Communication with TRE/TRX and/or OMU and/or TSC is established. See RSL and/or OML and/or TSL. All calls carried by TRX managed by the TCU process are lost. New calls can be established after a new instance is started.Causes loss of communication with Frame Unit(s) and/or OMU and/or TSC. The A-interface channels managed by the BSC are functioning correctly. The A-interface channels managed by the BSC are degraded. The A-interface channels managed by the concerned TC-16 SBL are not functioning correctly. The A-interface channels managed by the concerned TC-16 SBL are disabled. The TP board is working correctly. Non fatal alarms are present in TPGSM board or configuration change due to extension/reduction failed to apply to TPGSM board. The TP board is not working correctly. The standby board will become active and takes over all the functions. The board is disabled by the operator. The standby board will become active and takes over all the functions. Gain of transmission O&M availability from the BSC point of view. Loss of transmission O&M availability from the BSC point of view. The transmission processor controlling transmission O&M is functioning correctly. All transmission downloading managed by the process is lost.
FIT
FLT
OPR
TCU
IT
FLT
TC-16
IT
FIT FLT
OPR
TP-HW
IT FIT
FLT
OPR
TR-OM
IT FLT
TSC
IT
FLT
778 / 778