Professional Documents
Culture Documents
Pressure balanced type with anti-hammer device Mounted on the top of the tank, ref. 50 A (valve above water level) Flange and drilling to ISO 7005-2 (PN 10 or PN 16) and EN 1092-2 Use: For water and neutral liquids to max. 70C
78/8110
Material: Body, bonnet, plug, plug guide Liner, guide nut, seat, washer Lip sealing Sealings, plug sealing joint Connectors, bolts, lever, split pin Axels Float Coating Grey cast iron, EN-GJL 250 to EN 1561 Bronze Leather NBR rubber Steel Brass Stainless steel or copper (depending on diameter) Epoxy: Body, bonnet, plug, plug guide, lever, connectors
Options: Mounted on the top of the tank, ref. 50 A1 (valve below water level) Mounted near the bottom of the tank, ref. 50 B (chain for the float is not included)
Certifications: All materials in contact with drinking water are certified according to French regulations dated 29 May 1997
For further specifications, see section "Technical information". The designs, materials and specifications shown are subject to change without notice due to our continuing programme of product development. AVK International A/S/2002 31788110AG
78/8110
78/8110
Ref. 50 B Mounted near the bottom of the tank float chain not included
78/8110
13. Seat 14. Plug guide (Anti-hammer) 15. Lever 16. Float 17. Split pin
1 2 3 4 17 5 6 7 8 9 10 11 12 13 14 F 15 16
L C E Movement
A B
Ref. nos.
DN
A mm
B mm
C mm
D mm
E mm
L mm
F mm
G mm 50 A 50 A1 / 50 B
Weight kilos 50 A / 50 A1 50 B
28 34 40 51 79 87 177 260
37 43 49 60 88 96 186 263
Mounted on the top of the tank: Ref. 50 A (valve above water), ref. 50 A1 (valve below water) Mounted near the bottom of the tank: Ref. 50 B (float chain not included)