You are on page 1of 6

POWER SUPPLIES

- DC Power Systems - Inverters - Converters - Static Switches

+ Power System 1UDC+ Power System 1UDCPower System 1UDC+

Up to 38 recti ers & a controller, recti ers & a controller, 1266A Up to 38 1266A Up to 38 recti ers & a cont

The Gamatronic 1U DC+ power system provides clean DC power topower system provides clean DC power to sensitive equipment w The Gamatronic 1U DC+ sensitive equipment while simultaneously The charging the battery bank, and supplies backup power battery mains and supplies backup Gamatronic 1U DC+ power system provide charging the during bank, failure. power during mains failure. The 1U DC+ contains a 19 1 U subrack that can housecontainshot-plugged recti thatcharging the battery bank, and supplies backur or 2 recti ers + controller and recti ers, or The 1U DC+ up to 3 a 19 1 U subrack ers, The 1U DC+ contains a 19 1 U subrack that 2 can house up to 3 hot-plugged ca an ELVD device. an ELVD device. an13 U. device. ELVD Max system capacity: Up to 13 subrack (38 recti ers + capacity: Up to 13 subrack (38 recti ers + controller), 1266 A with height of 13 Max system controller), 1266 A with height of system capacity: Up to 13 subrack (38 rec Max Basic shelf:

Basic shelf: Basic shelf: 1U DC+ type I - includes a 19 1U shelf (subrack) with up -to 3 recti a 19 1U shelf (subrack) with up to 3 recti ers. 1U DC+ type I includes ers. 1U DC+ type I - includes a 19 1U shelf (subrac Electronic Basic shelf: Electronic Basic shelf: Electronic Basic shelf: 1U DC +type II - includes a 19 3U shelf with up to 2 recti -ers + SC 1UDC+ shelf with up to 2 recti ers + SC 1UDC+ 1U DC +type II includes a 19 3U 1U DC +type II - includes a 19 3U shelf with up controller and an Electronic LVD device. controller and an Electronic LVD device. controller and an Electronic LVD device.

Features
Very high e ciency: 96% 100A for each 1U shelf

Features
Very high e ciency: 96% 100A for each 1U shelf Intelligent power module, digitally controlled One to three hot-swap recti ers in each shelf Active current sharing among recti ers

Features
Very high e ciency: 96% 100A for each 1U shelf Intelligent power module, digitally controlled One to three hot-swap recti ers in each shelf

Intelligent power module, digitally controlled One to three hot-swap recti ers in each shelf Active current sharing among recti ers Universal input voltage

Active current sharing among recti ers Universal input voltage Universal input voltage A built-in dual 70 A Electronic Low Voltage Disconnect device (ELVD) A built-in dual 70 A Electronic Low Voltage Disconnect device (ELVD) A built-in dual 70 A Electronic Low Voltage Disco for battery protection for battery protection for battery protection Option to connect 2 external LVD contactors of up to 1600 A Option to connect 2 external LVD contactors of up to 1600 A Option to connect 2 external LVD contactors of u A high-performance, hot-swap system controller (SC 1UDC+) to measure, A high-performance, hot-swap system controller (SC 1UDC+) to measure, A high-performance, hot-swap system controller monitor and control voltages, current, power, battery, temperature, etc. monitor and control voltages, current, power, battery, temperature, etc. monitor and control voltages, current, power, ba USB (SC1U DC+) or TCP/IP+USB communication (SC 1UDC+ NET) USB (SC1U DC+) or TCP/IP+USB communication (SC 1UDC+ NET) USB (SC1U DC+) or TCP/IP+USB communication ( Advanced battery management Advanced battery management Advanced battery management Up to two battery sets handled in one system Up to two battery sets handled in one system Up to two battery sets handled in one system Automatic and pre-programmed battery test (for each battery set) Automatic and pre-programmed battery test (for each battery set) Automatic and pre-programmed battery test (for Automatic and pre-programmed equalize charging mode Automatic and pre-programmed equalize charging mode Automatic and pre-programmed equalize chargi Breaking alert by modem (option) Breaking alert by modem (option) Breaking alert by modem (option)

i cations

1UDC 24V 1UDC 48V 1UDC 48V EE 1UDC 24V 1UDC 48V 1UDC 48V EE INPUT 1UDC 24V 1UDC 48V INPUT 230V 230V Nominal Voltage 230V Nominal Voltage 85Vac285Vac, with derating Voltage Range 85Vac285Vac, with derating 1 Voltage Range 85Vac285Vac, with dera (@ full load) Nx6A Nx10A Maximum Current1 (@ full load) Nx6A Nx10A Features Maximum Current1 (@ full load) Nx6A 47Hz 63Hz Frequency 47Hz 63Hz Up to 30 units in parallel, 30kVA Frequency 47Hz 63Hz ull Load) ment while simultaneously Power Factor (@ Full Load)0.99 Employs high frequency PWM te 0.99 Power Factor (@ Full Load) 0.99 Relay disconnects input Fused Relay disconnects input Protection A microprocessor controls all Relay disconnects input Fused Relay disconnects input Protection Relay disconnects input Fused rs, or 2 recti ers + controller and for >300V for >300V diagnostics and operation for >300V for >300V for >300V Power density (2kVA in 1U 19 sh OUTPUT OUTPUT ht of 13 U. 27 0.2Vdc (default) 54 0.2Vdc 1kVA in 1U 9.5 cabinet) Voltage 27 0.2Vdc (default) 54 0.2Vdc Voltage 27 0.2Vdc 5 Lightweight 23Vdc 30Vdc Range 47Vdc 58Vdc Adjustable 23Vdc Adjustable Range 30Vdc 47Vdc 58Vdc 23Vdc 30Vdc 47V load) Standalone or parallel operation 1%, 0.25% Regulation (line & load) with controller Regulation1%, 0.25% with controller (line & load) 1%, 0.25% with contr Parallel capability for N+1 redun Nx40ANominal Current1 (Vin>195V) Nx33.3A (Vin>195V) Nx40A (Vin>195V)Current1 Nx33.3A (Vin>195V) Nominal High e ciency Nx40A (Vin>195V) Nx33.3 Nx20A (Vin=110V) Nx16A (Vin=110V) Nx20A (Vin=110V) Nx16A (Vin=110V) Continuous input DC curent Nx20A (Vin=110V) Nx16 (max 38 modules) (max 38 modules) (max 38 modules) (max 38 modules) Optional: (max 38 modules) bypass (for standalone (max W=30MHz Ripple & Noise @200mVp/p, 20mVrms BW=30MHz 200mVp/p, 20mVrms Ripple & Noise @ BW=30MHz 200mVp/p, 20mVrms se -52dbm Psophometric Noise over 600 (<2mV) -52dbm over 600 (<2mV) Psophometric Noise -52dbm over 600 (<2m al load) 94% @ 230Vac (nominal 92% @ 230Vac 96% @ 230Vac E eciency load) 94% @ 230Vac 92% @ 230Vac 96% @ 230Vac E eciency (nominal load) 94% @ 230Vac 92% @ 230Vac 92% @ 115Vac 88% @ 115Vac 94% @ 115Vac 92% @ 115Vac 88% @ 115Vac 94% @ 115Vac 92% @ 115Vac 88% @ 115Vac nt, Vo=0 Nx20A Short circuit current, Vo=0(Vin=230V) (Vin=230V) Nx14A Nx20A (Vin=230V) Nx20A (Vin=230V) Nx14A (Vin=230V) Nx20A (Vin=230V) Short circuit current, Vo=0 Nx20A (Vin=230V) Nx14A (Vin=230V) ection 31V 59.5V Over-voltage Protection 31V 59.5V Over-voltage Protection 31V Current limited, short circuit proof, output fuses Protection Current limited, short circuit proof, output fuses Protection Current limited, short circuit proof 10s Walk-in Time 10s Walk-in Time 10s 20ms 10 units of IPU1000 installed in pa Hold-up Time(90% load, output decays to 46V) 20ms (90% Hold-up Time load, output decays to 46V) 20ms (90% load, output decay dication 4 LEDs bar-graph Output Current Indication on the front panel 4 LEDs bar-graph on Output Current Indication the front panel 4 LEDs bar-graph on the fron ring Active Current 10% accuracy @ full load Sharing 10% accuracy @ full load Active Current Sharing 10% accuracy @ full loa GENERAL GENERAL (1 min)2 3000VacINPUT/OUTPUT, Withstand Voltage (1 min)2 1500vAC INPUT/GND 3000VacINPUT/OUTPUT, 21500vAC INPUT/GND Withstand Voltage (1 min) 3000VacINPUT/OUTPUT, 1500vAC t Temperature -10o70oC, output de-rated above 50oC by 5%oC o o o Operating ambient Temperature -10 70oC, output Temperature Operating ambientde-rated above 50 C by 5% C-10o70oC, output de-rated above o o ure o Storage Temperature -20 80 C -20o Storage Temperature 80 C -20o 80oC <95% non-condensing, equipped with standard 1U DC+ rack Humidity <95% Humidity non-condensing, equipped with standard 1U DC+ rack <95% non-condensing, equipped with st EN300 386-2 V1.1.1.3 (1997), EN55022, EN61000-4-2,3,4,5,6,11, EMC EN300EMC V1.1.1.3 (1997), EN55022, EN61000-4-2,3,4,5,6,11, 386-2 EN300 386-2 V1.1.1.3 (1997), EN55022, EN EN61000-3-2, EN61000-3-3 (certi ed) EN61000-3-2, EN61000-3-3 (certi ed) EN61000-3-2, EN61000-3-3 (c IEC950, EN60950 (certi ed) Safety IEC950, EN60950 (certi ed) Safety IEC950, EN60950 (certi dule) 146mm (W) x 44mm (H) x 260mm (D) Dimensions (1 module) 146mm module) Dimensions (1(W) x 44mm (H) x 260mm (D) 146mm (W) x 44mm (H) x 26 1.4Kg (1 module) 1.2Kg 1.4Kg Weight 1.4Kg 1.2Kg 1.4Kg Weight (1 module) 1.4Kg 1.2Kg
Notes: Notes: 1. N denotes the number of power modules 1. N denotes the number of power modules 1UDC+ E ciency (%) Vs. Output Current (A) 2. Equivalent DC test voltage is applied to 1UDC+ E voltage is applied to 2. Equivalent DC test ciency (%) Vs. Output Current (A) overcome Y-capacitors leakage current to overcome Y-capacitors leakage current to 100 ground. Output is oating (not grounded 100 ground. Output is oating (not grounded during test). 100 95 during test).
Efciency (%) 95 90 85 80 75 0 5 10 15 20 25 70 30 0 35 5 Efciency (%) 90 85 80 75 70 95 90 85 80 75 10 15 20 25 70 30 35

1UDC+ Speci cations

1UDC+ Speci cations

Model IPU 1000

Efciency (%)

mber of power modules voltage is applied to rs leakage current to ating (not grounded

1UDC+ E ciency (%) Vs. O

Load Output (A)

10

15

Load Output (A)

Model IPU 1000

0.5kVA 24V 1kVA 48V 0.5kVA 24V 1kVA 48V POWER 0.5kVA 24V 1kVA 48V POWER F e high frequency conversion Dual a t u r e s Dual high frequency conversion Topology Dual high frequency conversion Topology Dual 8-bit RISC Microcontroller Up to 30 units in parallel, 30kVA Dual 8-bit RISC Microcontroller Control logy Dual 8-bit RISC Microcontroller Control Employs high frequency PWM technology INPUT INPUT c (nominal)A microprocessor controls all 42 60Vdc 21 30Vdc 48Vdc (nominal) 24Vdc (nominal) 21 30Vdc 48Vdc (nominal) 42 60Vdc Voltage 24Vdc (nominal) 21 30Vdc 48Vdc (nominal) 42 60Vdc Voltage diagnostics and operation (max.) 21A (max.) 20A 20A (max.) Current density (2kVA in 1U 19 shelf; 21A (max.) 21A (max.) 20A (max.) Power full load, over 600 Current < 2mV at < 2mV at full load, over 600 Psophometric noise 1kVA in 1U 9.5 cabinet) < 2mV at full load, over 600 Psophometric noise 21Vdc 0.5 42Vdc 0.5 21Vdc 0.5 42Vdc 0.5 Low voltage shutdown Lightweight 21Vdc 0.5 42Vdc 0.5 Low voltage shutdown OUTPUT Standalone or parallel operation OUTPUT 220/230Vac y 220/230Vac Voltage capability for N+1 redundancy Parallel 220/230Vac Voltage 500VA / 300W 1000VA / 700W 500VA / 300W 1000VA / 700W High Power e ciency 500VA / 300W 1000VA / 700W Power 88% @ 24VDC 90% @ 48VDC 88% @ 24VDC 90% @ 48VDC E Continuous input DC curent ciency (dc-ac) 88% @ 24VDC 90% @ 48VDC E ciency (dc-ac) ation) 50/60Hz 0.1% (free-mode) Optional: Frequency bypass (for standalone operation) 50/60Hz 0.1% (free-mode) 50/60Hz 0.1% (free-mode) Frequency Active current sharing Active current sharing Synchronization system Active current sharing Synchronization system Pure sinewave Pure sinewave Waveform Pure sinewave Waveform 1.5% max. for linear load 1.5% max. for linear load THD 1.5% max. for linear load THD 4% max. for non-linear load 4% max. for non-linear load 4% max. for non-linear load 3:1 max. for non-linear load 3:1 max. for non-linear load Crest factor 3:1 max. for non-linear load Crest factor 1% (static) 1% (static) Voltage regulation 1% (static) Voltage regulation recovery within 500mS recovery within 500mS (line & load) recovery within 500mS (line & load) GENERALIPU1000 10 unitsto 30 units ininstalled in parallel GENERAL Up of parallel Up to 30 units in parallel Parallel Con guration Up to 30 units in parallel Parallel Con guration 1500VAC input-output 1500VAC input-output Isolation voltage 1500VAC input-output Isolation voltage 1500VAC output-chassis 1500VAC output-chassis 1500VAC output-chassis 500VDC input-chassis 500VDC input-chassis 500VDC input-chassis Output over-voltage, output overload Output over-voltage, output overload Protection Output over-voltage, output overload Protection & short circuit (inherent by pulse-by-pulse), LVD & short circuit (inherent by pulse-by-pulse), LVD & short circuit (inherent by pulse-by-pulse), LVD ow input voltage disconnection), over-temperature (low input voltage disconnection), over-temperature (low input voltage disconnection), over-temperature 5 LEDs and load bar graph 5 LEDs and load bar graph Display 5 LEDs and load bar graph Display IEC 950 (EN 60950) IEC 950 (EN 60950) Safety IEC 950 (EN 60950) Safety EN300-386-2, EN 50082-1, EN 55022 EN300-386-2, EN 50082-1, EN 55022 EMC (including the shelf) EN300-386-2, EN 50082-1, EN 55022 EMC (including the shelf) < 50dBA @ 1.5m < 50dBA @ 1.5m Audible noise < 50dBA @ 1.5m Audible noise -10o +50oC -10o +45oC -10o +50oC -10o +45oC o o Temperature -10 +50 C -10o +45oC Temperature 1 dry contact (fault indication) 1 dry contact (fault indication) Signalization 1 dry contact (fault indication) Signalization 202 x 44 x 243 202 x 44 x 243 Dimensions WxHxD (mm) 202 x 44 x 243 Dimensions WxHxD (mm) 1.5Kg 1.5Kg Weight (without shelf) 1.5Kg Weight (without shelf)

e without prior notice All speci cations are typical and subject to change without prior notice All speci cations are typical and subject to change without prior notice

STATIC SWITCH
Features

STATIC SWITCH
Features

Automatic static switch to increase reliability and overload capability to increase reliability and overload capability Automatic static switch Zero time load transfer from inverters to bypass and vice-versa Zero time load transfer from inverters to bypass and vice-versa Clear, user-friendly colored LED indicators on the static switch panel Clear, user-friendly colored LED indicators on the static switch panel Audible alarm if failure detected or load on bypass Audible alarm if failure detected or load on bypass Protect load against illegal bypass voltages Protect load against illegal bypass voltages THREE PHASE STATIC SWITCH (Wall Mounted) THREE PHASE STATIC SWITCH (Wall Mounted) 10 -250 kVA 10 -250 kVA

Ac input and output Threeinput and output Ac phase with a common neutral is available Three phase with a common neutral is av Nominal power Nominal power 10 ~ 250 kVA 10 ~ 250 kVA Input voltage range 196 V ~ 253 V (Phaserange to Neutral), other values are available 253 V (Phase to Neutral), other values ar Input voltage 196 V ~ Input frequency range 46 frequency other Input Hz ~ 64 Hz,range values are available 46 Hz ~ 64 Hz, other values are availab Transition time in synchronized mode1 < 3 msec Transition time in synchronized mode1 < 3 msec Transition time in non-synchronized mode Transition time in< 200 msec non-synchronized mode < 200 msec Signals and indicators 5 LEDs, 3 keys, Signals and indicators audible alarm 5 LEDs, 3 keys, audible alarm E ciency 99.9 % E ciency 99.9 % Regulations Complies Regulations with the IEC950 standard Complies with the IEC950 standard

SINGLE PHASE STATIC SWITCH 3U 3 30 kVA


AC input and output Nominal power Input voltage range Input frequency range Signals and indicators 6 E ciency Size in mm (H W D) Weight Regulations

SINGLE PHASE STATIC SWITCH 3U 3 30 kVA


Single phase with common neutral 3 to 30 kVA 187253 Vac, other ranges also available 46 Hz64 Hz, other ranges also available 6 LEDs, 3 keys, audible alarm, RS232 interface 99.9% 132 483 250 (3U) <10 kVA: ~10 kg ; 1030 kVA: ~15kg Complies with IEC950 standards

Single phase withAC input and output common neutral 3 to 30 kVA Nominal power 187253 Vac, other rangesvoltage range Input also available 46 Hz64 Hz, other ranges frequency range Input also available 6 LEDs, 3 keys, audible alarm, RS232 interface 6 Signals and indicators 99.9% ciency E 132 483 250 (3U) (H W D) Size in mm <10 kVA: ~10 kg ; 1030 kVA: ~15kg Weight Complies with IEC950 standards Regulations

SINGLE PHASE STATIC SWITCH 1U 3 kVA / 6 kVA

SINGLE PHASE STATIC SWITCH 3 kVA / 6 kVA

Ac inputs and output Single phase with common neutral Ac inputs and output Nominal power 3kVA Nominal 6kVA power Input voltage range 196 V~253V (Phase to Neutral), other voltage range Input values are available 196 V~2 Input frequency range 50 3Hz frequency range Input Maximum current 13A 30A Maximum current Signals and indicators 6 LEDs, 3 keys, audible alarm, RS232 indicators Signals and interface 6 LE E ciency 99.9% ciency E Size in mm (W D H) 485 280 Size(1U) (W D H) 44 in mm Weight 3.7kg Weight Safety Complies with IEC60950 Safety

erter

Dc-Dc Converter
48/24 600W Modules

odules

simply converts a nominal 48 V (42 V-61.5 V) into 24 V converts a nominal 48 V (42 V-61.5 V) into 24 V This dc-dc converter module simply ltage at the output. A maximum) accurate voltage at the output. (25 on to parallel several similar modules in order to gain more several similar modules in order to gain more The unit comes with the option to parallel tion (N+1). power and redundant operation (N+1).

Single Dc-Dc 48-24 Module Input 42 range Voltage61.5VDC 17A Current (max) >88% E ciency Against reserve polarity connection Protection Stops Voltage Protection Low at Vin < 42VDC Automatic at Vin > 46VDC Restart operation Output 24VDC Voltage 25A (folds back to 9A at shortcircuit) Current limit 5% Voltage adjustment 1% Voltage regulation 50mVrms Ripple Over load, output OVP, Over-temperature Protection 4 LED bar-graph display the load level Display Active current-sharing Parallel operation General -1050C Ambient temperature 0-95 Humidity % 146 (W); 44 (H); 260 (D) Dimensions (mm) 0.8 Weight (Kg) Input Output: 1500VDC Withstand voltage Input chassis: 1500VDC Output chassis: 1500VDC Forced, fan speed control Cooling IEC950, Safety EN60950 EN55022, EN6100-4-2 EMC 2,3,4,5,6,11 ,EN61000-3-2 EN6100-3-2, EN61000-3-3

Single Dc-Dc 48-24 Module 42 61.5VDC 17A (max) >88% Against reserve polarity connection Stops at Vin < 42VDC Automatic at Vin > 46VDC 24VDC 25A (folds back to 9A at shortcircuit) 5% 1% 50mVrms Over load, output OVP, Over-temperature 4 LED bar-graph display the load level Active current-sharing -1050C 0-95 % 146 (W); 44 (H); 260 (D) 0.8 Input Output: 1500VDC Input chassis: 1500VDC Output chassis: 1500VDC Forced, fan speed control IEC950, EN60950 EN55022, EN6100-4-2 2,3,4,5,6,11 ,EN61000-3-2 EN6100-3-2, EN61000-3-3

t prior notice speci cations are subject to change without prior notice - All - All images are for illustration only

USTRIES LTD. GAMATRONIC ELECTRONIC INDUSTRIES LTD.

Headquarters and Factory 972-2-5888222 Fax: +972-2-5828875 info@gamatronic.co.il www.gamatronic.com 14 Hartom St. POB 45029, Jerusalem 97774, Israel Tel: +972-2-5888222 Fax: +972-2-5828875 info@gamatronic.co.il www.gamatronic.com

May 2011

You might also like