Professional Documents
Culture Documents
DETERGENT DISPENSER
The detergent dispenser now uses a slide mechanism to change position between powdered and liquid detergent and replaces the moveable separator in the previous model.
11
TEARDROP REMOVAL
The teardrop must be removed whenever the console is accessed. To remove the teardrop: Remove the washer top. Lift the top center of the teardrop. Carefully pull the teardrop retaining pins out of the front panel holes and remove it.
Lift Top Of Teardrop
Teardrop Pins
Teardrop
12
The 10 teardrop retaining pins are tted into keyhole slots in the teardrop retainers. The pins can be replaced separately. The retainers are part of the teardrop assembly.
CONSOLE REMOVAL
To remove the console: Remove the detergent dispenser drawer and teardrop. Remove the two indicated screws from the console. Open the washer door, pull up on the center of the console, and release the locking tabs. Pull the right side of the console forward and release it from the interference bracket.
13
Wiring Connectors
Locking Tabs
User Interface
Break the plastic keeper from the control knob and remove the knob. NOTE: A new keeper will be supplied with the replacement knob.
14
UI Encoder Shaft
15
16