Professional Documents
Culture Documents
ATLAS LOCATIONS:
San Diego: Corporate Ofce 4640 Brinell St. San Diego, CA 92111 (858) 277-2100 fax (858) 277-0585 Las Vegas 4840 W. Hacienda Ave. Las Vegas, NV 89118 (702) 227-6800 fax (702) 222-0488 Los Angeles 2745 Raymond Ave. Signal Hill, CA 90755 (562) 595-1006 fax (562) 595-4117 Denver 4800 Race St. Denver, CO 80216 (303) 298-7777 fax (303) 298-7778 Phoenix 1611 South 27th Ave. Phoenix, AZ 85009 (602) 256-0600 fax (602) 256-0687 San Francisco (510) 353-0100 Mexico 001 (877) 586-2100
www.atlasform.com
PRODUCTS AL-SPEED Frame, A-Deck Shoring System, Truss & Column Mounted Flying Deck Forms, Garage Beam Forms, ACS Panel Wall Form, Atlas Aluminum & Wall Beam Systems, Ganged & Handset Column Forms. Concrete Form Form Panels, LVL EDGE Form, Post Shores, Safety Rail Post, Bridge Overhang Bracket, Waler Jacks. Form Releases, Curing Compounds, Sealers, Bondbreakers, Epoxies, Grouts, Repair Mortars, Underlayments, Toppings & Shake-On Floor Hardeners. Concrete Restoration-Polymer Concrete Overlays & Methacrylates. Precast Trench Drain Systems, Polydrain, Trench Former. ADA Detectable Warning Panels. Rebar Supports, Concrete Dobies, Edge Forms & Adhesives. Nails & Fasteners, Masking & Duct Tape. Industrial Concrete Sprayers. Formwork Accessories, Formliners, Tilt-Up & Precast Accessories, Bar Supports, Rebar Splicing Systems, Chemical & Repair Products. Column Forms, Capitol Forms, Box Voids. PVC Waterstops, Adhesive Waterstops & Accessories. Curing & Protection Paper, Moistop Vapor Barrier. Slab Bolsters, Bar Chairs & Post-Tensioned Slab Products. Internal & External Vibrators, Concrete Placing Equipment. Speed Dowels / PVC Waterstops, Plastic Control Joints, Chamfer. Synko-Flex & Hydro-Flex Adhesive Waterstops. Steel Stakes, Curb Forms & Accessories. Ultracure Curing Blankets, EZ Cover, EZ Dowel Load Transfer System Fiberglass Column Forms & Pans, Wafe Slab & Custom Forms. Forming Accessories, Snap Ties, Taper Ties, Coil Rod, Anchors, Inserts, Rebar Supports & Other Accessories. Pumps, Mixers, Power Trowels, Screeds & Generators. Decorative Concrete Stamps, Color Hardeners, Stains, Etc. Cement, Concrete, Sand, Aggregates & Other Building Materials. Concrete Tools & Accessories. Sonotube Forms & Void Forms. Concrete Accessories & Forming Products. Polyethylene Film Products. Epoxies, Form Releases, Bondbreakers, Surface Retarders & Specialites. Concrete Accessories, Snap Ties, Taper Ties, Coil Rod, Anchors, Inserts, Stakes, Dowels & Dowel Baskets. Plywood, LVL, Lumber & Building Materials. Cement Products, Repair Mortars & Chemicals. Specialty & Standard Styrofoam (Custom Sizes Available). Edge Forming Materials, LVL, Other Lumber & Building Materials. Chemicals, Expansion Joint & Plastics, Vapor Retarder & Paving Products.
ABT, Inc. Arcis / Access Tile Aztec Concrete Accessories BMD, Inc. Chapin Dayton Superior Deslauries Durajoint Fortiber Corp. General Technologies, Inc. (GTI) Global Mfg. / Viber-Kelley Greenstreak / Vinylex Henry Co. Hogan Company McTech Group MFG Construction Products Meadow Burke Multiquip Construction Equipment Proline Quikrete Roseburrough Tool Co. Sonoco Products Symons TRM Manufacturing Unitex Universal Building Products Universal Forest Products US Mix Products Western Insulfoam Weyerhaeuser / TrusJoist W.R. Meadows
www.atlasform.com
TABLE OF CONTENTS
GENERAL TERMS & SAFETY NOTES
10-FORMING & SHORING
20-FORMING ACCESSORIES
70- FOUNDATION
PRODUCTS
INDEX
www.atlasform.com
www.atlasform.com
www.atlasform.com
Safety Factor 2 to 1 2 to 1 3 to 1 2 to 1 2 to 1 2 to 1 3 to 1 2 to 1 4 to 1 5 to 1
Type of Construction
All applications Formwork supporting form weight and concrete pressures only Formwork supporting weight of forms, concrete construction live loads and impact All applications Precast concrete panels when used as formwork Bracing of tilt-up precast concrete wall panels Inserts used to make permanent connections between tilt-up or precast concrete elements Tilt-up construction Precast concrete construction Hardware used for lifting and handling of tilt-up or precast concrete elements
Form Hangers Anchoring Inserts Used as Form Ties Brace Anchors Inserts Lifting Inserts Lifting Plates and Related Items
Warning! When in doubt about the proper use or installation of Atlas Construction Supplys accessories and hardware, contact Atlas Construction Supply for clarication. Failure to do so may result in exposure of workers to unsafe conditions or hazards, resulting in the possibility of injury or death to workers in the vicinity of the jobsite.
www.atlasform.com
WARRANTY Atlas Construction Supply will refund the price of or replace, at its election, any product which it nds to be defective provided the product has been used properly. EXCEPT AS EXPRESSLY STATED ABOVE, THE COMPANY MAKES NO WARRANTY OF MERCHANTABILITY AND NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE NOR DOES IT MAKE ANY WARRANTY, EXPRESS OR, IMPLIED, OF ANY NATURE WHATSOEVER WITH RESPECT TO THE PRODUCT OR THE USE THEREOF, BY WAY OF ILLUSTRATION AND NO LIMITATION, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR DELAY CAUSED BY DEFECTS, FOR LOSS OF USE, FOR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, OR FOR ANY CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT ITS WRITTEN CONSENT. THE FOREGOING IS THE FULL EXTENT OF THE RESPONSIBILITY OF THE COMPANY EVEN THOUGH THE COMPANY MAY HAVE BEEN NEGLIGENT.
www.atlasform.com
Contractor Committed.
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
Call Atlas for competitive pricing on HDO, MDO and PSF plywood. Atlas stocks various sizes and styles of plywood to suit different project requirements.
www.atlasform.com
Versatile system can accommodate both simple or intricate deck designs. Less time and labor needed for erection and dismantling than other systems.
AL-SPEED FRAME COMPONENTS
6 wide frame reduces total number of frames needed to support suspended concrete and formwork. Approximately 100 Sq. Ft. per frame, up to 12 slab thickness. Minimal parts and components. Frame is complete with integral bearing surfaces. 6, 5, & 2 8 high frames accommodate all shoring heights (46 Min.). Available in 6 or 3 widths. Only 2 revolutions per inch for AL-SPEED jacks. Quick set-up and removal of system. Striated horizontal rails. Quicklock System allows for easy connection and removal of crossbraces.
40-BAR SUPPORTS
PRODUCTS
*One Semi-truck can carry up to 10,000 Ft2 of shoring equipment for up to 12 deck.
www.atlasform.com
Contractor Committed.
20-FORMING ACCESSORIES
Frame Capacity 3 Tiers High, Cross-Braced Towers Safety Factor= 2.5 : 1 Equal Screwjack Extension, Top & Bottom
40-BAR SUPPORTS
LVL BEAMS
Available in standard 4 x 4 with 7 and 14 lengths.
50-FLATWORK ACCESSORIES
CROSSBRACES
Cross braces available in standard sizes: 4 X 4, 4 X 6, 4 x 8, 4 x 10
FRAME SIZES
60-PRECAST & TILT-UP
70- FOUNDATION
6 x 28 Frame
PRODUCTS
6 x 5 Frame 6 x 6 Frame
3x 28 Frame
3 x 5 Frame
3 x 6 Frame
10
www.atlasform.com
ATLAS A-DECKTM
20-FORMING ACCESSORIES 30-ATLAS TECH PRODUCTS 40-BAR SUPPORTS 50-FLATWORK ACCESSORIES 60-PRECAST & TILT-UP
70- FOUNDATION
PRODUCTS
LARGER PRONG USED PRIMARILY FOR ALUMINIUM GIRDERS. WEDGE AND TRAY DROP 4.
www.atlasform.com
11
Contractor Committed.
ATLAS A-DECKTM
ATLAS A-DECKTM ADVANTAGES
Post shores can accommodate soft heights from 6-11 to 11-7, or up to 14-5 with available extension. Can support a 12 thick concrete slab on 6 x 8 grid throughout entire post range, including use of extension. (Up to 15-5 nished oor to nished oor). Can support slabs up to 48 thick throughout post range with standard equipment. Drop-head allows for early retrieval of joists and girders formwork and untrapped plywood while loaded post shore remains intact. 6 x 8 grid pattern reduces the amount of post shores required, reduces installation time, and is well suited for the use of 4 x 8 plywood sheets. Joists and girders are individually labeled by length to facilitate identication on the job site. Fast cycling of equipment by means of fastactuating drop-head, racks, baskets and carts. Hammer is only tool needed to install and strip system. Easily ties into A-DECKTM perimeter tables or AL-SPEED shoring frame.
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
12
www.atlasform.com
ATLAS A-DECKTM
ATLAS A-DECKTM TECHNICAL FEATURES
4 drop distance facilitates removal of girders, joists, and plywood. 3.5 X 3.5 LVL joists offer increased ability to place and secure plywood. Girders allow for use of conventional 4X4S or 4X6S when obstructions exist. Allows for double camber conditions, up to 10% slopes in each direction. Rigid braces provide better system stability than standard jet-lock style crossbraces. Quick release post shore pin allows 1/8 drop to facilitate removal of post shore. Drop head allows for changing direction of joist by 900.
A-DECKTM Carts: Atlas offers customers the convenience of A-DECKTM Carts designed to hold girders, LVL joists, posts and drop-heads. Contractors can easily move material from one part of the job site to another and store material.
PRODUCTS
www.atlasform.com
13
Contractor Committed.
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
14
www.atlasform.com
20-FORMING ACCESSORIES 30-ATLAS TECH PRODUCTS 40-BAR SUPPORTS 50-FLATWORK ACCESSORIES 60-PRECAST & TILT-UP
70- FOUNDATION
PRODUCTS
www.atlasform.com
15
Contractor Committed.
20-FORMING ACCESSORIES
Trusses In addition to handset decking systems, Atlas offers ying deck forms and truss solutions for repetitive, multi-reuse projects. Trusses are available in variable height aluminum or steel congurations. Joists are typically aluminum beams. Features of Atlas ying deck forms are: Aluminum and steel trusses Aluminum joists
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
70- FOUNDATION
PRODUCTS
16
www.atlasform.com
20-FORMING ACCESSORIES
Atlas offers column mounted deck systems that allow for fast cycling of repetitive deck layouts, without the need for typical reshore. The components include hi-capacity column mounted jacks, castellated primary members, and open web or aluminum joists. Features of Atlas Column Mounted Deck Systems: Hi-capacity column mounted jacks with integral rollers. Castellated beams with open web or aluminum joists. Table sizes up to 30 wide and 100 long. Minimal or no reshore necessary. Fast pour cycles. For more information on the Atlas Column Mounted Jack see page 38.
30-ATLAS TECH PRODUCTS 40-BAR SUPPORTS 50-FLATWORK ACCESSORIES 60-PRECAST & TILT-UP
70- FOUNDATION
PRODUCTS
www.atlasform.com
17
Contractor Committed.
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
18
www.atlasform.com
20-FORMING ACCESSORIES 30-ATLAS TECH PRODUCTS 40-BAR SUPPORTS 50-FLATWORK ACCESSORIES 60-PRECAST & TILT-UP
70- FOUNDATION
PRODUCTS
www.atlasform.com
19
Contractor Committed.
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
20
www.atlasform.com
WALLFORM COMPONENTS
GANGED ALUMINUM WALL FORMS
LIFTING LUG
20-FORMING ACCESSORIES
A-CLAMP
TIE PLATE
30-ATLAS TECH PRODUCTS
EDGE OF PLYWOOD
40-BAR SUPPORTS
PLAN VIEW
70- FOUNDATION
PRODUCTS
LIFTING LUG
www.atlasform.com
21
Contractor Committed.
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
22
www.atlasform.com
WALLFORM COMPONENTS
GANGED LVL WALLBEAM FORMS
LIFTING LUG
20-FORMING ACCESSORIES
YOKE BRACKET EDGE OF PLYWOOD ALUMINUM STRONGBACK (7-1/2) LVL WALLBEAM (5-1/2) TIE PLATE
PLAN VIEW
YOKE BRACKET
70- FOUNDATION
PRODUCTS
www.atlasform.com
Contractor Committed.
20-FORMING ACCESSORIES
For external elevated form applications, Atlas offers an integrated jump form system to augment the gang forms. The system utilizes the Atlas A100 Frame as its nucleus, which affords a 7 wide working platform to service the elevated forms. The system, suspended from jump-shoes bolted to the previous concrete lift, allows stripping, reworking, and preparation of the forms to proceed prior to crane assistance. This is achieved by means of a retracting carriage on which the form is mounted. The carriage allows approximately 30 of retractions from the previously cast face, giving adequate working clearance inside the form. With all this activity being possible at the working level, the form never needs to be brought to ground level or stored elsewhere while decking activity is proceeding. With this system, it is no longer necessary for unacceptably lengthy crane-intensive hoisting operations to take place. Neither is it necessary for workers to ride the forms during re-setting, as the gang/platform unit is hoisted as one and landed into previously mounted jump shoes. Hoisting time is extremely brief. An additional feature of the system is the trailing platform which is connected to the A100 Frame as the system climbs its way up the structure. This trailing platform serves several functions, namely: Allows convenient jump-shoe removal as construction proceeds. Allows access to the safety tie-back. Allows sacking and patching to be accommodated from this trailing platform.
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
24
www.atlasform.com
40-BAR SUPPORTS
STRONGBACK CONNECTORS
50-FLATWORK ACCESSORIES
A-100 BRACKET
PRODUCTS
JUMP SHOE
WIND TIE
A-100 BRACKET
PLATFORM BEAM
TRAILING SCAFFOLDING
PLAN VIEW
www.atlasform.com
25
Contractor Committed.
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
8 x 10 ACS Panel
70- FOUNDATION
PRODUCTS
10 ft
8 ft
26
www.atlasform.com
ACS Accessories
ACS Spacer Channel
40-BAR SUPPORTS
The ACS spacer channel allows for an adjustment to wall thickness from 6 to 20 in increments of 1. ACS Brace System
70- FOUNDATION
PRODUCTS
www.atlasform.com
27
Contractor Committed.
ALISPLY
MODULAR WALLFORM
STRAIGHT & RADIUS
This metric dimension, straight and radius modular forming system consists of a galvanized steel frame and a specially coated 15mm (5/8) plywood face. It provides the strength, durability, versatility and concrete nish needed for most gangforming applications. Panels and llers Available in a variety of widths from 25cm to 200cm, and heights of 1 meter or 3 meters, this range of panel and ller sizes means youll be able to form almost any wall dimension. When combined with corners and accessories, pilaster, bulkheads and columns can be formed with standard equipment. Horizontal or vertical Alisply forms can be used horizontally or vertically, even within the same gang without compromising strength. Alisply has the strength required for the large contact areas and fast pour rates common in large gangform applications. With a design pressure of 1230 lbs/sq.ft., only two ties are needed for 3 meter panel heights. Simple connections The Alisply system features simple clamp connections that eliminate the need for tools and aligning bars. Setting up or changing the conguration of gangs is fast and simple with these innovative attachment clamps, reducing assembly confusion, increasing productivity and simplifying the gangforming operations. Alisply Circular Alisply Circular is a recoverable modular formwork system for circular fair-faced concrete walls, designed to be handled with a crane. Alisply Circular consists of a light galvanized steel frame and a 15 mm thick phenolic plywood lining. The frame incorporates tie rods that allow giving the wall the required radius on site.
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
28
www.atlasform.com
FLEX-FORM SYSTEM
The all-steel Flex-Form system has integral 4 deep vertical stiffeners with 3/16 steel skin plate to provide a 1,000 psf system that handles radius 5 and over. Pre-rolled steel ribs set the radius. Factory rolled top and bottom ribs bolt to exible panels to shape and securely hold the form in the radius required. Panels conform accurately to the radius of the ribs ensuring that the correct radius is achieved every time. Panels are delivered to the job site preassembled to meet specic job requirements. Flex-Form panels are available in over 100 sizes, from 2 wide by 1 long to 10 wide by 20 long and are available on a sale or rental basis.
PRODUCTS
www.atlasform.com
29
Contractor Committed.
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
30
www.atlasform.com
STEEL-PLY
HANDSET WALLFORMS
The Steel-Ply forming system is a pre-engineered, factory built, reusable concrete forming system. It may be used in handset or gang form applications, for commercial or residential structures. The Steel-Ply forming system can form walls of almost any shape or size, with accessories for special structures and details. The Steel-Ply forming system saves time because it is easy to set up and strip. No measuring, sawing, drilling, or nailing is required. The only tool required is a hammer. Steel-Ply is available in a variety of standard sizes which can be combined to form virtually any dimension. This forming system is constructed of laminated plywood mounted on steel frames. With proper care this system can be used up to 200 times before being reconditioned. All standard panel sizes and most accessories are available on a rental or sale basis.
20-FORMING ACCESSORIES 30-ATLAS TECH PRODUCTS 40-BAR SUPPORTS 50-FLATWORK ACCESSORIES 60-PRECAST & TILT-UP
70- FOUNDATION
PRODUCTS
www.atlasform.com
31
Contractor Committed.
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
70- FOUNDATION
PRODUCTS
32
www.atlasform.com
FORMING ACCESSORIES
COLUMN FORMING
ONE PIECE ROUND COLUMN FORMS
One-piece round column forms are economical, and produce a smooth concrete nish. Manufactured of berglass reinforced plastic, these forms will not dent, sag, rot or weather and require little or any maintenance. Round Column Forms are lightweight, easy to handle, and simple to set up and remove. RCF forms have only one vertical seam and are supplied complete with bracing collars and fast bolts. Round Column Forms are designed for repeat use. RCFs are available on a sale or rental basis with diameters from 12 to 48 inches; available in one-piece lengths up to 20 feet.
Atlas Lined Tube is designed to hold full hydrostatic pressure of concrete in a single pour. Forms can be stripped any time after two days, or left on to protect columns from spills and other hazards of construction until the job is nished. Atlas Lined Tube combines the ease of handling, strength, and economics of one-piece paper tube column forms, with a poly liner that gives a smooth nish to the concrete, a nish that is sure to please the architect and owner. Atlas Lined Tubes are made to order and can be delivered within 5 working days. Sizes are from 6 to 48 inches in diameter, and in almost any lengths.
70- FOUNDATION
PRODUCTS
www.atlasform.com
33
FORMING ACCESSORIES
Contractor Committed.
COLUMN FORMING
SONOTUBE FORMS
Sonotube forms are made from multiple layers of high quality bre, providing a strong, lightweight and easy to handle column form. The spiral wound and laminated Sonotube form is a one-piece unit; there are no assembly costs and the form may be cut to t any desired length.
20-FORMING ACCESSORIES
Inside Diameter 4 6 8 10 12
15.10.10106 15.10.10108 15.10.10110 15.10.10112 15.10.10114 15.10.10116 15.10.10118 15.10.10120 15.10.10122 15.10.10124
0.120 0.120 0.140 0.140 0.165 0.165 0.190 0.190 0.210 0.210 0.270 0.295
15.10.20106 15.10.20108 15.10.20110 15.10.20112 15.10.20114 15.10.20116 15.10.20118 15.10.20120 15.10.20122 15.10.20124
0.160 0.160 0.190 0.190 0.215 0.250 0.250 0.295 0.295 0.295 0.295
40-BAR SUPPORTS
14 16 18
50-FLATWORK ACCESSORIES
USES Round columns Piers and footings Pile forms Light pole and fence pole bases Flagstones and round steps
20 22 24 26 28 30 32 34 36 42
15.10.20128 15.10.20130
15.10.10130
15.10.10136
0.295
48 60
70- FOUNDATION
PRODUCTS
34
www.atlasform.com
FORMING ACCESSORIES
COLUMN CLAMPS
SCISSOR CLAMPS
Quickly and easily applied or removed with no tools other than a carpenters hammer. Driving home permanently attached wedge pulls clamp tight. Bars are made of high strength carbon steel. Brackets are rugged malleable iron. Clean-Cut punched slots that provide tolerance adjustment. No detachable parts: a rivet prevents the bracket from slipping off. Wedges are chained to the brackets.
20-FORMING ACCESSORIES 30-ATLAS TECH PRODUCTS 40-BAR SUPPORTS 50-FLATWORK ACCESSORIES 60-PRECAST & TILT-UP
1) 3/4 plywood with at 2 x 4s on 6 centers. 2) Ten foot rate of pour. 3) Pure liquid head of 150 lbs. per square foot of accumulated depth. 4) Plywood deection between clamps limited to L/360 or 1/16. 5) Column Clamp safety factor = 2
70- FOUNDATION
PRODUCTS
* Clamps are sold and rented by the piece, but two (2) pieces are required to make a useable clamp set. ** Concrete dimensions based on 3/4 plywood with at 2 x 4s at 6 on center.
www.atlasform.com
35
FORMING ACCESSORIES
Contractor Committed.
The Atlas Post Shore is engineered for strength, installation efciency and long service life. This quality shoring product features high load capacities for shoring heights from 66 to 111 (8,100 lbs. fully closed to 5,100 lbs. at max extension*). The Atlas Jumbo Shore is engineered for maximum strength, installation efciency and long service life. This quality shoring product features high load capacities for shoring heights from 65 to 910 (15,000 lbs. fully closed to 13,700 lbs. at max extension*). The Atlas Jumbo Shore is fabricated with a secure locking pin that is inserted into one of the holes spaced at 4 intervals along the inner post. Once Jumbo Shore is set in position, a threaded collar with handle allows for easy height adjustment over a 6 range. With a high load capacity, the 59 lb. Jumbo Shore may be spaced further apart than other post shore systems, therefore reducing material and labor costs. The Atlas Shores are quickly and safely set in place with 3 simple steps: 1. Lift inner tube to approximate height required. 2. Insert pin in nearest hole to desired height. 3. Turn handle of threaded collar for nal adjustment. High Load Capacities at Shoring Heights From 65 To 111 15,000 lbs. fully closed to 13,700 lbs. at max. extension *(3 To 1 Safety Factor) Extremely High Strength To Weight Ratio (35 lb. Post Shore, 59 lb. Jumbo Post Shore) Minimal Time And Labor Needed for Set-Up And Removal Quick Disconnect/Breakdown System Galvanized For Durability & Long Service Life Easy Height Adjustment Rolled Thread No Loose Parts Weatherproof Head And Base Plates Drilled For Nailing
Atlas Post Shore Product Code No. 10.21.02402 Product Code No. 10.21.02412
20-FORMING ACCESSORIES
5.1
7' 2"
7' 10"
8' 6"
9' 2"
9' 10"
10' 6"
11' 1"
Height
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
70- FOUNDATION
PRODUCTS
36
www.atlasform.com
FORMING ACCESSORIES
20-FORMING ACCESSORIES
2 x 4, 2 x 6 OR CABLE READY
TOEBOARD READY
40-BAR SUPPORTS
Galvanized for maximum durability and service life. Easily adjustable clamp secures to slab sizes between 0-29. Predrilled holes at base provide for easy screwing to concrete slabs. Top adjusting wing nut allows for tightening from a standing position. Easy to maintain and transport from job to job.
Atlas AL-SPEED Safety Rail Post Extension attaches to the Atlas AL-SPEED Safety Rail Post and allows contractors to meet OSHA requirements of a 42 tall safety barrier after concrete is poured when standing on top of the nished concrete slab.
70- FOUNDATION
PRODUCTS
Product Code No. 20.10.10100 AL-SPEED Safety Guard Rail Post Extension Product Code No. 20.10.10110
www.atlasform.com
37
FORMING ACCESSORIES
Contractor Committed.
20-FORMING ACCESSORIES
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
70- FOUNDATION
PRODUCTS
20.10.21028 20.10.21042
38
www.atlasform.com
FORMING ACCESSORIES
C-49
Designed for use on prestressed concrete beams and medium depth steel beams. Aids in preventing web of beam from bending during construction of bridge deck. Design allows Bracket to be used on prestressed concrete beams without requiring wood blocking. Accepts C-51 Wall Plate Assembly Under special conditions, Bracket can be adjusted to a minimum vertical height of 14.
20-FORMING ACCESSORIES
C-49-D
30-ATLAS TECH PRODUCTS
Designed for use on deep steel plate girder beams. Aids in preventing web of beam from bending during construction of bridge deck. Accepts C-51 Wall Plate Assembly Note: C-49-D is shipped unassembled
40-BAR SUPPORTS
C-49-JR
50-FLATWORK ACCESSORIES
Designed for use on prestressed concrete beams and medium depth steel beams. Short chord length allows brackets to be used where full sized brackets can not be utilized. Design allows Bracket to be used on prestressed concrete beams without requiring wood blocking. Accepts C-51 Wall Plate Assembly
C-51
Special Order
Type Assembly Adjustment Plate Only Wall Bracket Only Product Code No. Wt. Lbs. 1.75 Ea.
70- FOUNDATION
PRODUCTS
C-51-R
Special Order
80- TOOLS & PLACING
Product Code No. Wt. Lbs. 1.75 Ea.
www.atlasform.com
39
FORMING ACCESSORIES
Contractor Committed.
ENGINEERED LUMBER
Atlas Laminated Veneer Lumber (LVL) beam is an engineered wood ber that promotes innovative designs, efciencies and cost savings when used in our Atlas wall forms, deck forms, beam forms, column forms and other concrete forming applications. Atlas LVL beam is a durable and reusable forming element that is manufactured to resist bowing, shrinking and twisting; results in uniform, predictable and true line performance. Atlas designs and engineers the LVL Beam in-house to accomodate multiple forming applications. This achieved exibility provides easy form construction and saves considerable time. The strength and stiffness provided in the LVL Beam minimize the amount of labor needed for constructing and utilizing the forms.
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
FORMING PLYWOOD
HDO CONCRETE FORM PANEL
HDO 100/30 is designed to provide multiple reuses and produce excellent concrete nishes at a lower per pour cost than other HDO forming panels. HDO 100/30 concrete form panels are made of high quality, exterior grade plywood with an high resin content face overlay for extra durability and smoothness.
PRODUCTS
PSF (Phenolic Surface Film) plywood offers concrete contractors signicant advantages over other types of forming panels: Superior concrete nish: smooth, hard, clean and consistent. High durability for maximum # of reuses. Excellent strength and stiffness. Higher labor efciency. Phenolic overlay pour surface on both sides of panel. Edge sealed. Attractive contact foot material costing.
40
www.atlasform.com
FORMING ACCESSORIES
WOOD CHAMFER
Length 1/2 Pine 5/8 Pine 3/4 Pine 1 Pine 1-1/16 Pine 1-1/2 Pine Product Code No. 20.27.10050 20.27.10060 20.27.10075 20.27.10100 20.27.10107 20.27.10150
CHAMFER/FORMER STRIPS
20-FORMING ACCESSORIES
RADIUS FORMERS
Made from a specially designed plastic material that provides a smooth, uninterrupted, rounded radius corner to poured concrete. The material strips cleanly from nished concrete and is easily removed from forms for reuse.
Length 1/2 Plastic Radius with Tail 3/4 Plastic Radius with Tail
50-FLATWORK ACCESSORIES
CHAMFER STRIPS
Provides a smooth, uninterrupted beveled edge to piers, beams, and all outside corners of poured concrete. They are easily applied, equipped with or without nailing ange to facilitate installation, and reusable for maximum economy.
Length 1/2 All Plastic 5/8 All Plastic 3/4 All Plastic 1 All Plastic 1-1/16 All Plastic Product Code No. 20.27.20050 20.27.20060 20.27.20075
20.27.20100 20.27.20107
PRODUCTS
DRIP STRIPS
Provides a smooth uniform drip groove on the underside of roof overhangs and porches. The material is nailed to the form and is easily removed from the concrete. It also can be reused several times.
www.atlasform.com
41
FORMING ACCESSORIES
Contractor Committed.
FORMLINERS
Atlas offers the widest selection of architectural concrete formliners in the industry. Over 500 patterns and textures allow for design versatility; with custom sizes and patterns also available for specic job requirements. Contact your Atlas representative for information on patterns & sizes. A complete catalog is available with detailed information on each formliner. Formliners are available in the following different materials depending on the specic application and the number of reuses required. SPS Plastic - A single use plastic form liner designed for limited application. Made from a polystyrene plastic, the initial square foot price is much less than other types of formliner material. This proves very economical when only one use is needed. ABS Plastic - Thermoformed in ABS plastic, these formliners exhibit good impact resistance and excellent overall performance. Reuse factor is 10, subject to pattern conguration, proper handling and jobsite conditions. Dura-Tex - An economical polyurethane elastomer formliner that possesses many of the qualities of premium elastomeric, but with slightly less durability. Pattern reproduction is excellent and the reuse factor is 40, subject to pattern conguration, proper handling and jobsite conditions. Elasto-Tex - A premium polyurethane elastomer formliner that exhibits exceptional durability and tear strength. It is exible enough to allow stripping from slight undercuts or complex designs and resilient enough to maintain pattern details. Reuse factor is 100, subject to pattern conguration, proper handling and jobsite conditions. Packaging Formliners are generally available in standard 4 x 10 sheets. Custom sizes and patterns are available upon request.
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
42
www.atlasform.com
FORMING ACCESSORIES
FORMLINERS
Formliner Patterns
20-FORMING ACCESSORIES
Hundreds of different sizes, shapes & textures are available in the following typical patterns: Fractured (Fin, Rib, Flute) Wood Brick Block Stone Smooth Flute Custom patterns also available!
Features of Formliners
Nearly all patterns are available in 4 types of materials, ranging from single-use to 100 uses! Hundreds of typical patterns to choose from. Custom patterns also available. Typical patterns provided in 4 x 10 sheets. Consistent results. Easy installation. Easy to strip when Atlas Release or Bio-Guard is used as the form release agent. Knowledgeable technical support.
Formliner Accessories
Form Release Agent - Atlas Release is an ideal form release agent for any of the Dayton Superior formliners. Atlas Bio-Guard water-based release agent has also produced excellent results on polyurethane formliners. Rustication & Chamfer Strips - Create distinct features and bold reveals with easy to attach rustication & chamfer strips. These reusable strips provide sharp features to enhance the appearance of exposed concrete. Just nail to the form; also prevents leakage.
PRODUCTS
www.atlasform.com
43
FORMING ACCESSORIES
Contractor Committed.
FORMING COMPONENTS
3/4 Plywood Aluminum Beam
MIKE BRACKET
Once welded to the existing soldier beams, the Mike Bracket allows contractor time and labor saving versatility of employing a standard heavy-duty gang wall form system for a onesided wall form. A coil nut is attached to the Mike Bracket in a manner that permits off-center entry with our snubnose taper tie. The Mike Bracket is produced of A-36 hot rolled steel. The Mike Bracket is to be adequately welded to the soldier beam with 3/8 llet weld, fully on each 3 side. Safe Working Loads (2.0 to 1) 1 Standard Mike Bracket - 18,000 lbs. 1-1/4 Heavy Duty Mike Bracket - 36,000 lbs.
20-FORMING ACCESSORIES
20.20.63000 20.20.62000
40-BAR SUPPORTS
T EE ET SH HE D S ST TD S 9 t 7 97 je ick yform Qu ta S
STAY-FORM/QUICKJET
STAY-FORM or Quickjet are ribbed expanded metal leave-in-place concrete forms that are used for forming bulkheads, pile caps, grade beams, blindside walls, bridge applications and wherever form removal is difcult. Construction joints are easily made; each side of STAY-FORM or Quickjet provides a substantial key for bonding abutting pour faces. STAY-FORM or Quickjet may also be used for curved forming applications, such as water treatment tanks. Reduces labor costs in difcult forming applications. Joint scabbling is eliminated. Allows for continuous placement of rebar. May be cut to size to t specic project requirements. Allows for visual inspection of concrete pour. Pre-galvanized for jobsite storage. Blind side walls are easily formed using STAY-FORM or Quickjet with a special HookTie and conventional formwork on face side.
50-FLATWORK ACCESSORIES
3/4 Plywood
#5 Rebar
70- FOUNDATION
End Dimension
PRODUCTS
Keeper STAY-FORM
Lumber Dimension
Product 27 x 97 panel 19.7 x 78.7 panel 23.6 x 78.7 panel Quickjet Angle
Quickjet Quickjet
44
www.atlasform.com
FORMING ACCESSORIES
20-FORMING ACCESSORIES
Component DSI Rod DSI Rod DSI Rod DSI Rod DSI Rod DSI Rod
Length 48 66 72 48 66 72
Safe Working Load 19.6 Kips 19.6 Kips 19.6 Kips 33.7 Kips 33.7 Kips 33,7 Kips
Length 62 72
40-BAR SUPPORTS
Component DSI Wing Nut DSI Wing Nut Bracket / Cathead DSI Wing Nut
50-FLATWORK ACCESSORIES
Size 3 x 3
Component Component 5/8 Plastic Cone 7/8 Plastic Cone 1 Plastic Cone Cone Removal Tool Component 5/8 Lead Plug 7/8 Lead Plug 1 Lead Plug Size 5/8 7/8 1 Wt. Lbs. .26 ea .37 ea .52 ea Length 1-1/2 1-1/2 1-1/2 Dia. 1-5/8 1-7/8 2-1/4 Product Code No. 20.35.50006 20.35.50004 20.35.50003 20.35.70010 Product Code No. DSI Coupler
Size 7/8
10.63.14930
70- FOUNDATION
PRODUCTS
www.atlasform.com
45
FORMING ACCESSORIES
Contractor Committed.
End
20-FORMING ACCESSORIES
Wall Size
4-3/4 L & W Only Product Code No. A-4-H 20.21.32106 20.21.32107 20.21.34107 20.21.32108 20.21.32109 20.21.32110 20.21.34111 20.21.32112 20.21.32114 20.21.32115 20.21.32116 20.21.32118 20.21.32120 20.21.32122 20.21.32123 20.21.32124 20.21.32128 20.21.32130 20.21.32136
5 6
6 7 7-5/8 8
23.5 24.7 25.4 25.8 26.9 28.0 29.9 30.3 32.6 33.7 34.8 37.1 39.4
7 7-5/8 8 9 10 11-5/8 12 13 14 15 16 18 20 24 26
9 10 11-5/8 12 14 15 16
40-BAR SUPPORTS
18 20 22 23 24 28
43.9
28 30
50-FLATWORK ACCESSORIES
30 36
50.6
36 48
Made with 1 x 1 plastic cones or metal spreader. Other sizes available upon request. Hex head measures 1/2 across ats. Note: Because of high tension stress, 100% breakback is not guaranteed for hex head snap ties with L & W over 4-3/4. Loose Washer ties available by special order.
End
Wall Size
8-1/4 L & W Only Product Code No. 20.21.51106 20.21.51108 20.21.51109 20.21.51110 20.21.51111 20.21.51112 20.21.51114 20.21.51116 20.21.51118 20.21.51122 20.21.51124 20.21.51132
4-3/4 L & W Only Product Code No. 20.21.52106 20.21.52108 20.21.52109 20.21.52110
70- FOUNDATION
1 x 1 Plastic Cone
8 9 10 11 12 14 16
PRODUCTS
18 22 24 32
46
www.atlasform.com
FORMING ACCESSORIES
A-5
A-6
A-7
40-BAR SUPPORTS
A-7-A
50-FLATWORK ACCESSORIES
A-8
A-9
PRODUCTS
www.atlasform.com
47
FORMING ACCESSORIES
Contractor Committed.
A-21-F
FLAT TIE
Special Order
Wall Size 8 Product Code No. Wt. Lbs. per 100 24.0 28.4 32.8
20-FORMING ACCESSORIES
10 12
A-21-K
TIE KEY
Special Order
Product Code No. Wt. Lbs. 50.0 per carton Packaging 1,000 per carton
A-21-U
STRAP TIE
Special Order
Wall Size 6 8 10 12 Product Code No. Wt.Lbs. per 100 20.6 30.4 34.8 39.0 41.2 45.6
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
14 16
A-21-X
X-FLAT TIE
Heavy Duty available upon request.
Wall Size Product Code No. 20.22.20006 20.22.20008 20.22.20010 20.22.20011 20.22.20012 20.22.20015 20.22.20018 20.22.20024
6 8 10 11 12 15
70- FOUNDATION
18
PRODUCTS
24
48
www.atlasform.com
FORMING ACCESSORIES
SPREADER CLEATS
Special Order
Wall Size 6 8 10 12 6 8 10 12 End Size 3/4 3/4 3/4 3/4 1-1/8 1-1/8 1-1/8 1-1/8 Product Code No. Wt. Lbs. per 100 36.3 43.1 47.9 52.7 41.0 47.8 52.6 57.4 Packaging 100 per carton 100 per carton 100 per carton
A-22
100 per carton 100 per carton 100 per carton 100 per carton 100 per carton
A-27
A-29
50-FLATWORK ACCESSORIES
BREAKBACK WRENCH
Special Order
Product Code No. Wt. Lbs. 1.5 Ea.
A-30
70- FOUNDATION
PRODUCTS
www.atlasform.com
49
FORMING ACCESSORIES
Contractor Committed.
A-31
Special Order
Type Hex A-31 Product Code No. Wt. Lbs. 0.8 Ea.
20-FORMING ACCESSORIES
A-35
STRONGBACK TIE
Special Order
Length 7-1/2 Product Code No. Wt. Lbs. .250 Ea.
40-BAR SUPPORTS
A-40
50-FLATWORK ACCESSORIES
A-44
70- FOUNDATION
A-45
PRODUCTS
BASE TIE
Wall Size 6 8 9 10 12 Product Code No. 20.22.30006 20.22.30008 20.22.30009
50
www.atlasform.com
FORMING ACCESSORIES
LOOP TIES
A-46 LOOP PANEL TIE
2,250 Lbs. Standard
Wall Size 6 7 8 9 10 12 13 14 15 16 18 20 24 28 30 32 36 40 20.22.10010 20.22.10012 20.22.10013 20.22.10014 20.22.10015 20.22.10016 20.22.10018 20.22.10020 20.22.10024 20.22.10028 20.22.10030 20.22.10032 20.22.10036 20.22.10040 20.22.10008 Product Code No. 20.22.10006
A-46 A-48
3,000 Lbs. Heavy Duty
Wall Size 6 7 8 9 10 12 Product Code No.
14 15 16 18 20 24
7 8 10 12 13 14
70- FOUNDATION
15
PRODUCTS
16 18 20 24
Available in full cartons only. All other sizes and conditions available.
www.atlasform.com
51
FORMING ACCESSORIES
Contractor Committed.
A-49
20-FORMING ACCESSORIES
A-51
WEDGE BOLT
Product Code No. 12.55.60058 Wt. Lbs. per 100 12.0 Packaging 500 per pail
40-BAR SUPPORTS
A-52
Z TIE HOLDER
Product Code No. 12.55.60056 Wt. Lbs. per 100 70.0 Packaging 50 per carton
50-FLATWORK ACCESSORIES
A-53
WALER TIE
Size 2x4 Product Code No. 12.55.60062 12.22.60063 Wt. Lbs. per 100 11.5 14.0 Packaging 200 per carton 200 per carton 2x6
70- FOUNDATION
PRODUCTS
52
www.atlasform.com
FORMING ACCESSORIES
CONCRETE PLUGS
Size 1 x 1 Snap Tie Cone Plugs Product Code No. 20.28.40010 Wt. Lbs. per 100 2.4 Packaging 1000 per carton
A-54
For lling holes left by plastic cones; eliminates job patching problems. Use Atlas Acryl Bond or Epoxy Bonder to glue in the plug. Stocked in Grey only Available in full cartons only.
20-FORMING ACCESSORIES
A-55
Special Order
Wall Size 6 7 7-5/8 8 9 10 11-5/8 12 14 15 16 18 20 24 Product Code No. Wt. Lbs. per 100 18.0 19.0 20.0 21.0 22.0 23.0 25.0 26.0
Sold only in boxes of 100 ties with 1 x 1 self-centering plastic cone. Other Non-Stock ties available with 15/16 ends.
SURE-LOCK BRACKET
Special Order
Product Code No. Wt. Lbs. 1.4 Ea. Packaging 50 per carton
A-56
70- FOUNDATION
PRODUCTS
www.atlasform.com
53
FORMING ACCESSORIES
Contractor Committed.
A-56-A
SPEEDY BRACKET
Special Order
Product Code No. Wt. Lbs. 1.5 Ea.
20-FORMING ACCESSORIES
A-57
SURE-LOCK STRONGBACK
Special Order
Product Code No. Wt. Lbs. 0.5 Ea. Packaging 100 per carton
40-BAR SUPPORTS
A-57-A
STIFFBACK BRACKET
Special Order
Product Code No. Wt. Lbs. 1.3 Ea.
50-FLATWORK ACCESSORIES
A-58
SURE PLUG
FOR PLUGGING HOLES IN CONCRETE AFTER REMOVING TAPER TIES
Size 16 18 20 Nominal Dia. 1 1-1/8 1-1/4 Length 1-1/4 1-3/8 1-3/8 Product Code No. 20.28.30010 20.28.30020 20.28.30030 Wt. Lbs. per 100 4.8 5.2 7.3
PRODUCTS
A-59
Special Order
Plug Size 11 14-16 Product Code No.
18-20 22-24
Note: To order complete A-59 Insertion Tool specify the size of plug. Stems for plug sizes 16, 20 and 24 are interchangeable in a common insertion tool. The stem for plug size 11 will work only with the insertion tool made for size 11 plugs.
54
www.atlasform.com
FORMING ACCESSORIES
A-63
JAHN A BRACKET
U.S. Patent No. 2,967,689
Product Code No. 20.20.10001 Wt. Lbs. 1.4 Ea. Packaging 50 per carton
A-81
Available in full cartons only. Jahn A bracket; use with loose 2 x 4 walers and plywood for forming any type wall Eccentric compensates for 2 x 4 variations
40-BAR SUPPORTS
JAHN C BRACKET
U.S. Patent No. 2,967,689
Product Code No. 20.20.10002 Wt. Lbs. 1.1 Ea. Packaging 75 per carton
A-82
50-FLATWORK ACCESSORIES
Available in full cartons only. Jahn C bracket; for attaching vertical strong-backs where alignment is needed - high walls, foundations
JAHN CORNERLOCK
U.S. Patent No. 3,771,757
Product Code No. 20.20.10010 Wt. Lbs. 2.0 Ea. Packaging 20 per carton
A-83
60-PRECAST & TILT-UP
Available in full cartons only. Jahn Cornerlock; for outside corners, pilasters and columns Quickly locks outside corners with cam action handle Can be used with other forming systems
70- FOUNDATION
PRODUCTS
A-86
Available in full cartons only. Jahn Tie Extender; converts short-end snap tie into a long-end snap tie.
www.atlasform.com
55
FORMING ACCESSORIES
Contractor Committed.
A-87
20-FORMING ACCESSORIES
A-88
A-89
40-BAR SUPPORTS
Jahn Scaffold Jack; one piece all-steel unit, easily attaches to Waler Brackets For 24 x 24, 16 x 24 or 16 x 16 tie spacings
50-FLATWORK ACCESSORIES
A-90
Special Order
A-97
70- FOUNDATION
PRODUCTS
A-100
SPEED STEP
Special Order
Product Code No. Wt. Lbs. 0.8 Ea.
56
www.atlasform.com
FORMING ACCESSORIES
COIL TIES
Special Order
B-1, 1/2 Dia. (4,500 Lbs.) Standard 2-Struts Various Sizes Available Special Order
B-1/B-3, 1/2 Dia. (4,500 Lbs.) Standard 2-Struts Various Sizes Available Special Order
B-1, 1/2 Dia. (6,750 Lbs.) Heavy 2-Struts Various Sizes Available Special Order
B-1/B-3, 1/2 Dia. (6,750 Lbs.) Heavy 2-Struts Various Sizes Available Special Order
B-1, 3/4 Dia. (6,750 Lbs.) Standard 2-Struts Various Sizes Available Special Order
B-1/B-3, 3/4 Dia. (6,750 Lbs.) Standard 2-Struts Various Sizes Available Special Order
B-1, 3/4 Dia. (9,000 Lbs.) Heavy 2-Struts Various Sizes Available Special Order
B-1/B-3, 3/4 Dia. (9,000 Lbs.) Heavy 2-Struts Various Sizes Available Special Order
40-BAR SUPPORTS
B-1, 1 Dia. (13,500 Lbs.) Standard 2-Struts Various Sizes Available Special Order
B-2, 1 Dia. (18,000 Lbs.) Standard 4-Struts Various Sizes Available Special Order
B-2, 1-1/4 Dia. (27,000 Lbs.) Heavy 4-Struts Various Sizes Available Special Order
50-FLATWORK ACCESSORIES
Neoprene Water Seal furnished as standard, metal Water Seal available on special order.
PRODUCTS
www.atlasform.com
57
FORMING ACCESSORIES
Contractor Committed.
B-6
20-FORMING ACCESSORIES
B-7 B-22
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
B-11
FLAT WASHER
Plate Size 3 x 3 x 1/4 3 x 3 x 3/8 3 x 4 x 3/8 4 x 4 x 3/8 3/4 Hole Product Code No. 20.40.83933 20.40.83833 20.40.83834 20.40.83844
70- FOUNDATION
PRODUCTS
58
www.atlasform.com
FORMING ACCESSORIES
COIL ROD
HIGH TENSILE STRENGTH (MINIMUM SAFETY FACTOR 2 TO 1) SEE PRODUCT P-49 FOR LOW TENSILE STRENGTH ROD
Dia. 1/2 3/4 1 1-1/4 1-1/2 Stock Length 12 12 12 12 12 Safe Working Load (Lbs.) 9,000 18,000 38,000 56,000 68,000 Product Code No. 20.30.37012 20.30.35012 20.30.33012 20.30.32012 20.30.31012 Wt. Lbs./Ft. 0.530 1.150 2.040 3.480 6.010
B-12
Note:
Left-handed coil thread available. 1-1/8 diameter available on request. For lengths less than 12 ft. see D-18. Longer lengths available. 5/8 and 7/8 available on request.
40-BAR SUPPORTS
Dia. 5/8 Wing Nut Wing Nut Bracket 5/8 Cone 5/8 Coupler
50-FLATWORK ACCESSORIES
7/8 Wing Nut Wing Nut Bracket 7/8 Cone 7/8 Coupler
20-0
32,000
1.550
COIL NUTS
FOR HEAVY COIL HEX NUTS, SEE B-25
Dia. 1/2 5/8 3/4 7/8 Product Code No. 20.30.80701 20.30.80601 20.30.80501
B-13
PRODUCTS
70- FOUNDATION
1 1-1/4 1-1/2
Note:
Left-handed coil threaded nuts available. Stainless steel Coil Nuts available.
www.atlasform.com
59
FORMING ACCESSORIES
Contractor Committed.
B-14
COIL BOLTS
3/4 Diameter
Bolt Length 2
(9,000 Lbs.) Product Code No. 20.30.45020 20.30.45025 20.30.45030 20.30.45035 20.30.45040
2-1/2 3 3-1/2 4 5 6 7 8 9 10
5 6 7 8 9 10 11 20.30.47100
20.30.45060
11 12 13 14 15 16 17 18 20.30.45120
40-BAR SUPPORTS
12 13 14 15 16 17
50-FLATWORK ACCESSORIES
18
1 Diameter
Bolt Length 4 6 8
1-1/4 Diameter
Bolt Length 4 6 8 10
20.30.42060
12 14 16 18
70- FOUNDATION
24
PRODUCTS
30 36 48
1-1/2 Diameter
Bolt Length 6
All 1/2 diameter Coil Bolts less than 6 long have a rated work load of 4,125 lbs. All 1/2 diameter Coil Bolts 6 or longer have a rated work load of 6,750 lbs.
60
www.atlasform.com
FORMING ACCESSORIES
B-14-A
Length 12 16 18 20 24
Length 12 16 18 20 24
B-14-W
40-BAR SUPPORTS
B-15
B-16
70- FOUNDATION
PRODUCTS
Minimum concrete strength of 2,000 psi; Safe Working Loads shown with 4 to 1 safety factor are 1/4 of the approximate ultimate strength based on the mechanical strength of the strut wire and welds.
www.atlasform.com
61
FORMING ACCESSORIES
Contractor Committed.
B-17
20-FORMING ACCESSORIES
B-35 Machine Threads available Minimum concrete strength of 2,000 psi; Safe Working Loads shown with 4 to 1 safety factor are 1/4 the approximate ultimate strength based on the mechanical strength of the strut wire and welds.
B-18
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
70- FOUNDATION
PRODUCTS
B-35 Machine Threads available Minimum concrete strength of 2,000 psi; Safe Working Loads shown with 4 to 1 safety factor are 1/4 the approximate ultimate strength based on the mechanical strength of the strut wire and welds.
B-20
WALE HOLDER
Special Order
Size Product Code No. Wt.Lbs. per 100 25.0 36.5
62
www.atlasform.com
FORMING ACCESSORIES
B-21
(1/2 Coil Thread)
B-25
40-BAR SUPPORTS
B-27
50-FLATWORK ACCESSORIES 60-PRECAST & TILT-UP
B-29 B-30
70- FOUNDATION
PRODUCTS
www.atlasform.com
63
FORMING ACCESSORIES
Contractor Committed.
B-31
20-FORMING ACCESSORIES
B-32
40-BAR SUPPORTS
B-33
50-FLATWORK ACCESSORIES
13,500 13,500
Minimum concrete strength of 2,000 psi; Safe Working Loads shown with 4 to 1 safety factor are 1/4 of the approximate ultimate strength based on the mechanical strength of the strut wire and welds.
70- FOUNDATION
PRODUCTS
B-37
64
www.atlasform.com
FORMING ACCESSORIES
B-39
B-40
B-42
50-FLATWORK ACCESSORIES
B-43
1-1/4
12/15
70- FOUNDATION
PRODUCTS
Minimum concrete strength of 2,000 psi; Safe Working Loads shown with 4 to 1 safety factor are 1/4 of the approximate ultimate strength based on the mechanical strength of the strut wire and welds.
www.atlasform.com
65
FORMING ACCESSORIES
Contractor Committed.
D-1 D-18
20-FORMING ACCESSORIES
6 6 6 8
6 7 8 9 10 11 12
40-BAR SUPPORTS
13 14 15 16 17 18
50-FLATWORK ACCESSORIES
6 8 10 12 14 15
70- FOUNDATION
16
PRODUCTS
18 20 22 24 30 36
66
www.atlasform.com
FORMING ACCESSORIES
33.2 35.4
40-BAR SUPPORTS
ANCHOR BOLT
Bolt Dia. 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Length 6 8 10 12 14 16 18 60.25.27010 60.25.27012 Product Code No. Bolt Dia. 5/8 5/8 5/8 5/8 5/8 5/8 5/8 Length 6 8 10 12 14 16 18 60.25.26016 60.25.26018 60.25.26010 60.25.26012 Product Code No.
D-1-PA
D-1-S
PRODUCTS
70- FOUNDATION
Sizes for smooth round bars. When using rebar, increase anchor-bolt sleeve by 1/4.
www.atlasform.com
67
FORMING ACCESSORIES
Contractor Committed.
D-2
20-FORMING ACCESSORIES
3/4
3/4 diameter Acme Thread (external) for 1/2 diameter Inside Tie Rod with NC threads. She Bolts with coil threads and larger sizes see D-30. West Coast Acme Thread is 5 threads per inch. Caution: Acme Thread pitch varies from region to region.
D-4
40-BAR SUPPORTS
D-6
50-FLATWORK ACCESSORIES
D-9
70- FOUNDATION
30
PRODUCTS
34 36 42 43 48 52
20.30.16034 20.30.16036
54 60 72 80
68
www.atlasform.com
FORMING ACCESSORIES
D-9-A
49 57 41 49 57 42 50 58
D-9-UHS
40-BAR SUPPORTS
ROD CLAMP
Special Order
Size No. 1 2 3 Rod Dia. 1/4 3/8 1/2 Product Code No. Wt. Lbs. per 100 38.2 119.1 202.0 Clamps Per Carton 50 50 50
D-12
PENCIL ROD
Special Order
Type 1/4 Pencil Rod Coils 3/8 Pencil Rod Coils Product Code No. 20.25.79012 20.25.78012
70- FOUNDATION
D-12-A
PRODUCTS
1/4 and 3/8 diameter straight lengths available up to 20 ft. long. 1/4 Dia. Bright Basic, sold in full coils only.
www.atlasform.com
69
FORMING ACCESSORIES
Contractor Committed.
D-12-F
FORM CLAMP
Special Order
Size For 1/4 and 3/8 Rods Product Code No. Wt. Lbs. per 100 120.0
20-FORMING ACCESSORIES
D-12-S
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
D-14
TIGHTENING WRENCH
Rod Dia. 1/4 3/8 1/2 Product Code No. 20.20.31020 Wt. Lbs. 1.3 Ea. 1.3 Ea. 1.3 Ea.
70- FOUNDATION
PRODUCTS
70
www.atlasform.com
FORMING ACCESSORIES
D-21
To order: specify rebar diameter, distance between centerline of bar and face of concrete and wall thickness.
20-FORMING ACCESSORIES
BATTER WASHER
Special Order
Bolt Dia. 1-1/4-1-3/8 1-1/2-1-5/8 Product Code No. Wt. Lbs. 5.5 Ea. 5.5 Ea.
D-22
40-BAR SUPPORTS
D-24
50-FLATWORK ACCESSORIES
950.0
Pivot Pin furnished with coil thread. Threaded rod not included.
D-25 D-26
70- FOUNDATION
PRODUCTS
www.atlasform.com
71
FORMING ACCESSORIES
Contractor Committed.
D-30
SHE BOLT
FURNISHED WITH COIL THREAD
Inside Tie Rod Dia. 1/2 1/2 or 5/8 1/2 or 5/8 1/2 or 5/8 5/8 3/4 3/4 3/4 3/4 3/4 7/8 or 1 1 1 1 1 1-1/8 or 1-1/4
Approx. Work Load Lbs. 8,625 9,000 or 12,000 9,000 or 12,000 9,000 or 12,000 12,000 18,000 18,000 18,000 18,000 18,000 31,000 or 33,750 37,500 37,500 37,500 37,500 44,750 or 45,500
Length 20 18 20 24 20 24 30 35 20 24 30 35 -
20-FORMING ACCESSORIES
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
D-30-A
Length 18 20 24 30 18 20 24 30
18,000
5/8 5/8
7.0
70- FOUNDATION
PRODUCTS
32,000
7/8 7/8
7.2
32,000
7/8 7/8
10.2
SWL: Safe working load at 2 to 1 factor of safety 80- TOOLS & PLACING
72
www.atlasform.com
FORMING ACCESSORIES
CLOSED COUPLER
Thread Rod Dia. 1/2 3/4 7/8 1 1-1/4 1-1/2 Length 2-1/2 3 4 4-1/2 5-1/2 7 20.30.80305 20.30.80205 Product Code No. 20.30.80705 20.30.80505 Wt. Lbs. 0.2 Ea. 0.4 Ea. 0.9 Ea. 2.1 Ea. 2.8 Ea. 4.1 Ea.
D-32
HE-BOLT
Special Order
Size 1-1/4 to 1 1-1/2 to 1-1/4
D-40
MAGNA JAW
U.S. Patent No. 4,880,245
D-49
Special Order
Product Code No. Wt. Lbs.
50-FLATWORK ACCESSORIES
8.0 Ea.
PRODUCTS
www.atlasform.com
73
FORMING ACCESSORIES
Contractor Committed.
D-60 D-67
SUPERTIE GRIPPER
FOR FIBERGLASS ROD
Type D-60-G6000 D-67-G15000 Dia. 0.306 0.500 Product Code No. 20.20.33011 20.20.33005 Wt. Lbs. 46.0 per pail 52.0 per pail Packaging 100 per pail 50 per pail
20-FORMING ACCESSORIES
D-61 D-69
SUPERTIE WEDGE
FOR FIBERGLASS ROD
Type D-61-H6000 D-69-H15000 Product Code No. 20.20.33060 Wt. Lbs. 27.0 per carton 30.0 per carton Packaging 100 per carton 50 per carton Fits Rod 0.306 0.500
40-BAR SUPPORTS
D-62 D-68
50-FLATWORK ACCESSORIES
D-62-R6/20G D-68-R15/20G
D-63 D-70
SUPERTIE WATERSTOP
FOR FIBERGLASS ROD Special Order
Type D-63-WS 6000 D-70- WS15000 Product Code No. Wt. Lbs. 6.0 per carton 8.0 per carton Packaging 1,000 per carton 1,000 per carton
70- FOUNDATION
PRODUCTS
D-64
74
www.atlasform.com
FORMING ACCESSORIES
SCREW ANCHORS
Special Order
Dia. Length Plain Product Code No. Galvanized Product Code No. Wt. Lbs. per 100 23.8 54.0
F-1
4 6 7 8 13
20-FORMING ACCESSORIES
80.6 89.4 -
F-2
9 12 16 18 -
40-BAR SUPPORTS
F-3
Special Order
Dia. 3/4 1 1-1/4 1-1/2 Length 7 9 12 14 Product Code No. Wt. Lbs per 100 155.0 376.0 757.0 1331.0 Ea. 1 Add Wt. Lbs. 12.5 22.3 35.0 50.0
F-4
70- FOUNDATION
PRODUCTS
F-4-T
www.atlasform.com
75
FORMING ACCESSORIES
Contractor Committed.
F-5
THREADED INSERTS
Special Order Also see F-42, F-43 and F-44
Bolt Dia. 1/2 Type 13NC 11NC 10NC 9NC Product Code No. Wt. Lbs. per 100 35.0 60.0 51.3 90.0
20-FORMING ACCESSORIES
F-7
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
70- FOUNDATION
PRODUCTS
76
www.atlasform.com
FORMING ACCESSORIES
REGLET
Type Galvanized Filled Galvanized Open
Special Order For Cushion-Lock and Gasket-Lock Reglets see F-100 thru F-122
Product Code No. Wt. Lbs. per 100 ft. 40.0 37.0 Quantity per skid 6,000 ft. 6,000 ft.
F-16
F-17
40-BAR SUPPORTS
DOVETAIL
Special Order
Product F-21 Dovetail Corrugated Brick Anchor Size 16 ga. Length From Face of Concrete 3-1/2 5-1/2
F-21
F-34
70- FOUNDATION
PRODUCTS
www.atlasform.com
77
FORMING ACCESSORIES
Contractor Committed.
F-37
WALL PLUG
Special Order
Size & Type 26 ga. Galv. Stock 2 wide Product Code No. Wt. Lbs. per 100 5.0
F-42
20 NC 16 NC 13 NC 11 NC 10 NC 9 NC 8 NC
40-BAR SUPPORTS
F-44
50-FLATWORK ACCESSORIES
20 NC 16 NC 13 NC 11 NC 10 NC 9 NC 8 NC
7/8 1
70- FOUNDATION
PRODUCTS
F-45
CAP PLUG
FOR USE WITH FERRULE INSERT Special Order
Bolt Dia. 3/8 Product Code No. Wt. Lbs. per 100 0.2 0.2 0.3 0.4 0.8 1.0
78
www.atlasform.com
FORMING ACCESSORIES
F-47
EYE NUT
Special Order
Dia. 1/2 3/4 1 1-1/4 1-1/2 20.30.80506 20.30.80306 NC Threads Product Code No. Coil Threads Product Code No. Wt. Lbs. 0.7 Ea. 1.2 Ea. 2.8 Ea. 6.0 Ea. 6.0 Ea.
F-48
Normally furnished with coil thread; can be furnished with National Coarse Thread.
40-BAR SUPPORTS
EYE BOLT
COIL ROD WELDED TO EYE NUT
Bolt Dia. 1/2 3/4 1 1-1/4 1-1/2 Bolt Length 2-1/2 3 3-1/2 4 6 Product Code No. 20.30.57025 20.30.55030 20.30.53035 Wt. Lbs. 0.8 Ea. 1.3 Ea. 3.7 Ea. 4.7 Ea. 9.3 Ea.
F-49
F-49-A
70- FOUNDATION
PRODUCTS
www.atlasform.com
79
FORMING ACCESSORIES
Contractor Committed.
F-50
20-FORMING ACCESSORIES
F-52
40-BAR SUPPORTS
3/4 - 10 NC 1 - 8 NC
50-FLATWORK ACCESSORIES
F-53
70- FOUNDATION
PRODUCTS
1-1/4 1-1/2
80
www.atlasform.com
FORMING ACCESSORIES
F-54
F-54-RT
Type
Dia.
Threads
Insert Length 4-1/2 4-5/8 5-1/2 5-5/8 5-1/2 5-5/8 7-1/2 7-5/8 9-1/2 9-5/8
No. of Struts 2 2 2 2 4 4 4 4 6 6
Wt. Lbs.
F-56 F-57 F-56 F-57 F-58 F-59 F-58 F-59 F-60 F-61
Note: For Safe Working Loads please contact an Atlas Representative. F-57 - 5/8 and 7/8 available upon request. F-57 With Washer- 1/2, 5/8 and 7/8 available upon request. F-57, F-59, and F-61 available in stainless steel.
70- FOUNDATION
PRODUCTS
www.atlasform.com
81
FORMING ACCESSORIES
Contractor Committed.
F-62
20-FORMING ACCESSORIES
Note: For Safe Working Loads please contact an Atlas Representative. Available with mounting washer.
F-63
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
F-64
1/2
13 NC 13 NC 11 NC 11 NC 10 NC 10 NC 9 NC 8 NC 8 NC
70- FOUNDATION
1/2
PRODUCTS
82
www.atlasform.com
FORMING ACCESSORIES
TYPE L INSERTS
Special Order 2-STRUT WITH COIL
Type L L Dia. 1/2 3/4 Product Code No. Wt. Lbs. per 100 19.0 24.0
F-65
F-65-W
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
F-72
70- FOUNDATION
PRODUCTS
www.atlasform.com
83
FORMING ACCESSORIES
Contractor Committed.
F-73
20-FORMING ACCESSORIES
7/8 1 1-1/4
Ferrules with closed bottom and National Coarse Threads can be supplied instead of a coil.
F-74
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
F-105
70- FOUNDATION
PRODUCTS
Available only in full boxes of 200 ft. in 10 ft. lengths. Each box of Type B-4 Reglet includes 24 connector plugs and installation instructions with template pattern. Cushion-Lock Reglets are protected by U.S. Patent Numbers 3,241,271 - 3,246,433 - 3,319,384- 3,981,108 - 3,974,619.
84
www.atlasform.com
FORMING ACCESSORIES
BEAM CLIP
Special Order
Slot Size 7/16 3/16 Type A B Gauge 16 ga. Galv. 16 ga. Galv Product Code No. Wt. Lbs. per 100 12.8 13.1
H-3
20-FORMING ACCESSORIES
PLASTIC PLUG
FOR PLYWOOD FORMS
Size 9/16 13/16 Product Code No. 20.28.10010 20.28.10020 Wt. Lbs. Per Carton 4.0 7.0 Packaging 1,000 per carton
H-5
FORM PATCH
Size & Type 1-3/4 dia. Galv. Stock 2-1/4 dia. Galv. Stock 2-3/4 dia. Galv. Stock Product Code No. 20.28.11175 20.28.11225 20.28.11275 Wt. Lbs. Per Carton 20.0 27.0 33.0 Packaging 1,000 per carton
H-6
40-BAR SUPPORTS
PRODUCTS
www.atlasform.com
85
Contractor Committed.
20-FORMING ACCESSORIES
70- FOUNDATION
PRODUCTS
Form Release Agents Curing Compounds Concrete Sealers Bondbreakers for Tilt-Up Liquid Bonding Agents Epoxy Bonding Agents Epoxy Injection Resins Grouts Patching & Repair Mortars overlays & deck sealers Self-Leveling Underlayments Shake-on Floor Hardeners
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
All Atlas Tech Products are conveniently stocked at all Atlas Construction Supply locations!
www.atlasform.com
ATLAS RELEASE
Chemically Reactive Form Release Agent
Description
Atlas Release is an extremely effective, chemically reactive form release agent that prevents concrete from bonding to formwork and leaves clean, smooth, hard and consistent concrete surfaces. The organic compounds in Atlas Release react with the alkali content of concrete to produce a slick release and allow for quick and easy removal of concrete formwork. The resulting concrete surface is stain-free and ready to accept curing compounds, sealers, paint or other architectural treatments.
20-FORMING ACCESSORIES Atlas Release used for over 500,000 sq. ft. of architectural walls on the Cathedral of Our Lady of the Angels in Los Angeles, CA. 30-ATLAS TECH PRODUCTS
Uses
May be used on many types of concrete forms, such as wood, steel, aluminum, berglass, plastic, paper, epoxy or urethane coated molds, masonite and formliners. Treat wood and steel forms to increase the useable life of form surfaces. Spray on equipment such as mixers, pavers, trucks, nishing machines, etc. for easy clean-up and maintenance.
Coverage
Untreated Plywood: 700 - 1,200 ft2 per gal. BB Grade Plyform: 1,200 ft2 per gal. MDO: 1,200 - 1,500 ft2 per gal. HDO: 2,000 ft2 per gal. Steel, Aluminum, Fiberglass: 2,000 - 2,500 ft2 per gal. Atlas Fog Spray Tip This valuable spray tip increases coverage rates up to 400% over standard fan-type spray tips. Saves material costs and produces a great concrete nish!
Packaging 5 gallon pails 55 gallon drums 275 gallon totes Product Code 30.10.10025 30.10.10035 30.10.10045
40-BAR SUPPORTS
PRODUCTS
Atlas Release
Competitor Release
www.atlasform.com
87
Contractor Committed.
ATLAS BIO-GUARD
Water-Based, Biodegradable Form Release Agent
Uses
Ideal for environmentally sensitive projects, such as bridge work over rivers & streams, potable water reservoirs, or jobsites where spillage or run-off is a concern. May be used on many types of concrete forms for architectural concrete, such as wood, steel, aluminum, berglass, plastic, paper, epoxy or urethane coated molds, masonite, formliners and expanded polystyrene. Excellent with most elastomeric and PVC formliners. Spray on equipment such as mixers, pavers, nishing machines, etc. for easy clean-up and maintenance.
Description
Atlas Bio-Guard is a premium, environmentally safe, chemically reactive form release agent for use on many different types of concrete forms. A natural emulsied organic vegetable oil, Bio-Guard is biodegradable and is ideal for use in environmentally sensitive areas, concrete precast plants, or wherever architectural concrete surfaces are required. Bio-Guard provides easy form stripping, produces concrete surfaces that are stain-free, smooth & non-dusting, and minimizes form clean-up time and maintenance costs.
20-FORMING ACCESSORIES
40-BAR SUPPORTS
Coverage
Untreated Plywood: 500 - 1,000 ft2 per gal. MDO: 1,000 - 1,200 ft2 per gal. HDO: 1,500 ft2 per gal. Steel, Aluminum, Fiberglass: 1,500 - 2,000 ft2 per gal.
Packaging Product Code 30.10.11025 30.10.11035 30.10.11045
50-FLATWORK ACCESSORIES
Atlas Bio-Guard performs with urethane formliners! Read Product Data Sheet and MSDS prior to use.
Description
Atlas Premium Gold Release is a high performance, chemically reactive form release agent that is ideal for high visual impact precast and architectural concrete. Premium Gold Release provides easy removal of many types of concrete forms and leaves a stain-free concrete surface that is smooth, hard, and ready to accept further treatments. Premium Gold Release produces beautiful clean concrete surfaces and helps eliminate bugholes & surface dusting.
70- FOUNDATION
PRODUCTS
Coverage
Untreated Plywood: 800 - 1,200 ft2 per gal. MDO: 1,500 - 2,000 ft2 per gal. HDO: 2,500 ft2 per gal. Steel, Aluminum, Fiberglass: 2,500 - 3,000 ft2 per gal.
Packaging 5 gallon pails 55 gallon drums 275 gallon totes Product Code 30.10.10525 30.10.10535 30.10.10545
Uses
Ideal for high visual impact precast and architectural concrete. May be used on many types of concrete forms, such as wood, steel, aluminum, berglass, plastic, paper, epoxy or urethane coated molds, masonite and formliners. Compatible with most elastomeric and PVC formliners. Treat wood and steel forms to increase the useable life of form surfaces.
88
www.atlasform.com
Atlas Quantum-CureTM is a clear, water-based concrete curing compound that is formulated to ensure proper concrete strength development, prevent shrinkage cracks, and leave a bondable surface for further coatings, treatments or ooring. This ready-to-use, non-staining, membrane-forming cure is formulated to control moisture retention in freshly placed concrete for proper cement hydration. Quantum-CureTM does not need to be removed prior to the application of subsequent sealers, paints, adhesives, ooring materials, waterproong, etc. Quantum-CureTM provides contractors, architects, engineers and owners a simple solution to compatibility and discoloration issues. Available in a NSF Standard 61 formulation for potable water projects.
Description
Uses
Concrete oors, decks, walls, columns, beams, sidewalks, driveways, architectural concrete, etc. Interior and exterior applications. Ideal for schools, hospitals, condominiums, ofce buildings, parking garages, warehouses, manufacturing facilities, food processing plants, stadiums, house foundations, etc. NSF formulation for potable water projects, and GreenSpec listed for LEED projects.
Coverage
Broom Finish: 200 - 400 ft2 per gal. Smooth Finish: 400 - 600 ft2 per gal. Vertical Surface: 400 - 500 ft2 per gal.
Packaging 5 gallon pails 55 gallon drums 275 gallon totes Product Code 30.11.11025 30.11.11035 30.11.11045 Product Code 30.11.11125 30.11.11135
40-BAR SUPPORTS
PRODUCTS
www.atlasform.com
89
Contractor Committed.
ATLAS RES-CURE
Clear, Water-Based, Dissipating Resin Curing Compound
Description
Atlas Res-Cure is an emulsied resin curing compound for use on interior, exterior, horizontal and vertical concrete surfaces. This ready-to-use membrane-forming cure is formulated to control moisture retention in freshly placed concrete for proper cement hydration. Res-Cure provides excellent early curing properties and will begin to dissipate approximately 28 - 40 days after application. Once the resin is completely dissipated, the concrete surface is suitable for application of subsequent sealers, paints, adhesives, ooring materials, waterproong, etc. Atlas Res-Cure is available in many DOT approved formulations, including Caltrans, Nevada, Arizona and Colorado. Ask your Atlas representative for further information.
20-FORMING ACCESSORIES
Description
Atlas Res-Cure White is a white-pigmented, emulsied resin curing compound for use on exterior, horizontal and vertical concrete surfaces. This ready-to-use membraneforming cure is formulated to control moisture retention in freshly placed concrete for proper cement hydration. Res-Cure White provides excellent early curing properties; the white pigment keeps the concrete surface cooler and helps prevent thermal cracking. Ideal for concrete highways, airport runways, bridges, street & curb paving, sidewalks, canals, dams, etc. Atlas Res-Cure White is available in many DOT approved formulations, including Caltrans, Nevada, Arizona and Colorado. Ask your Atlas representative for further information.
Read Product Data Sheet & MSDS prior to use.
70- FOUNDATION
PRODUCTS
Description
Atlas Clear Cure Wax is a water emulsied wax curing compound for freshly poured concrete surfaces. This high solids formulation controls water retention during the curing period to help produce strong and durable concrete and help prevent plastic shrinkage cracks & surface dusting. Atlas Clear Cure Wax is ideal for concrete highways, airport runways, residential paving, canals, dams, etc. Atlas Clear Cure Wax is available in many DOT approved formulations, including Caltrans, Nevada, Arizona and Colorado. Ask your Atlas representative for further information.
Read Product Data Sheet & MSDS prior to use.
90
www.atlasform.com
Description
Atlas Whix Cure is a water emulsied white wax curing compound for application on freshly placed concrete surfaces. Atlas Whix Cure forms a vapor sealing membrane to control moisture retention and produce strong and durable concrete. The white pigmentation in Atlas Whix Cure provides good reective protection for exterior concrete which is important for applications that are subject to high temperatures caused by exposure to direct sunlight. Ideal for concrete highways, airport runways, bridges, street & curb paving, sidewalks, canals, dams, etc. Atlas Whix Cure is available in many DOT approved formulations, including Caltrans, Nevada, Arizona and Colorado. Ask your Atlas representative for further information.
Read Product Data Sheet & MSDS prior to use.
20-FORMING ACCESSORIES
Description
Atlas Cure & Hard is a clear, odorless, water-based, general purpose concrete curing compound. This economical cure is a reactive blend of silicates that will penetrate the concrete surface to provide adequate hydration, prevent surface dusting, and increase the density of the concrete. Cure & Hard leaves no residue on the concrete and provides a bondable surface for subsequent treatments and coatings.
Read Product Data Sheet & MSDS prior to use.
50-FLATWORK ACCESSORIES
ATLAS FINISH-FILM
Evaporation Reducer & Finishing Aid
Description
Atlas Finish-Film is a water-based evaporation retarder for use on freshly placed concrete atwork. Finish-Film produces a monomolecular lm on the concrete surface to prevent rapid moisture loss and allow for proper nishing. Finish-Film is especially benecial during rapid-drying conditions and will help prevent plastic shrinkage cracking.
70- FOUNDATION
PRODUCTS
Uses
During nishing of concrete atwork when rapid-drying conditions exist (high ambient temperatures, high winds, direct sunlight, low humidity, low water-cement ratio concrete mixes). May be used with shake-on oor hardeners and toppings, cementitious patches & repair mortars. Interior and exterior applications.
Read Product Data Sheet & MSDS prior to use.
Packaging 5 gallon pails 55 gallon drums Product Code 30.11.16025 30.11.16035
www.atlasform.com
91
Contractor Committed.
Description
Atlas Cure & Seal-14% is a water-based, acrylic copolymer solution that provides concrete with both an excellent cure and seal of the concrete surface. Cure & Seal-14% forms a clear membrane on the concrete surface to retain the necessary moisture in freshly placed concrete for proper strength development and help prevent plastic shrinkage cracks & dusting. This multi-funtional product provides a low to medium sheen nish on the surface and helps resist staining and penetration of mild chemicals, oils, salts and other contaminants.
Packaging 5 gallon pails 55 gallon drums 275 gallon totes Product Code 30.12.10025 30.12.10035 30.12.10045
20-FORMING ACCESSORIES
Description
Atlas Cure & Seal-30% is a water-based, acrylic copolymer solution that provides concrete with both an excellent cure and seal of the concrete surface. Cure & Seal-30% forms a clear membrane on the concrete surface to retain the necessary moisture in freshly placed concrete for proper strength development and help prevent plastic shrinkage cracks & dusting. This multifuntional product provides a high sheen nish on the surface and helps resist staining and penetration of mild chemicals, oils, salts and other contaminants.
Packaging Product Code 30.12.11025 30.12.11035 30.12.11045
50-FLATWORK ACCESSORIES
70- FOUNDATION
PRODUCTS
92
www.atlasform.com
Description
Atlas Easy-Seal is a clear acrylic concrete curing and sealing compound that helps provide proper strength development and a protective seal for concrete surfaces. Easy-Seal has been formulated with premium materials to produce a fast-drying, non-yellowing, membrane-forming product that meets ASTM C-309 curing standards and provide a durable nish for increased protection from chemicals, oils, chlorides and stains.
20-FORMING ACCESSORIES
Uses
Cure, seal, harden & dustproof freshly placed concrete surfaces or seal, harden & dustproof aged concrete. Exposed columns, beams & walls, commercial & industrial oors, parking structures, ofce buildings, driveways, sidewalks, architectural concrete, etc. Ideal for tilt-up casting slabs prior to the application of a bondbreaker. Interior, exterior, horizontal and vertical applications.
Coverage
Broom Finish: 200 - 400 ft2 per gal. Smooth Finish: 300 - 500 ft2 per gal. Tilt-up Casting Slab: 400 - 600 ft2 per gal.
Packaging 5 gallon pails 55 gallon drums 275 gallon totes Product Code 30.12.11525
40-BAR SUPPORTS
30.12.11535
Atlas Easy-Seal is compatible with Atlas bondbreakers for Tilt-Up construction!...Atlas provides complete product systems to save contractors $$$ & liability, while providing a better nished product!
ATLAS TECH-1315
Clear, Water-Based, High Solids Acrylic Cure & Seal Meeting ASTM C-1315
50-FLATWORK ACCESSORIES
Description
Atlas Tech-1315 is a high-performance, water-based, acrylic concrete cure, sealer, hardener and dustproofer. This easy-to-use product is ultraviolet resistant and meets the demanding ASTM C-1315 specication for moisture retention and color stability when applied to freshly placed concrete. Tech-1315 produces a protective lm on the concrete surface to help concrete reach its maximum strength and hardness and to improve resistance to harsh weather conditions, most acids & chemicals, oils, salts and other contaminants. Tech-1315 dries to a clear, medium sheen nish that will enhance the natural appearance of concrete, brick, decorative stone and exposed aggregate.
PRODUCTS
Uses
Cure, seal, harden & dustproof freshly placed concrete or seal, harden & dustproof aged concrete surfaces. Interior, exterior, horizontal and vertical applications. Seal and enhance the appearance of aged concrete, terrazzo, brick and masonry. Ideal for exposed columns, beams & walls, commercial & industrial oors, food processing plants, maintenance facilities, factories, parking structures, ofce buildings, driveways, sidewalks, architectural concrete, etc.
Read Product Data Sheet & MSDS prior to use.
Coverage
Broom Finish: 200 - 400 ft2 per gal. Smooth Finish: 300 - 500 ft2 per gal.
Packaging 5 gallon pails 55 gallon drums 275 gallon totes Product Code 30.12.12025 30.12.12035 30.12.12045
www.atlasform.com
93
Contractor Committed.
Uses
Cure, seal, harden and dustproof concrete surfaces. Interior, exterior, horizontal and vertical exposed concrete surfaces. Areas subjected to heavy walking or vehicle trafc. Protect and enhance the appearance of existing concrete, exposed aggregate, colored concrete, stone, brick, tile, stucco, plaster, etc. Ideal for shopping plazas, hotels, schools, stadiums, lobbies, residences, driveways, garages, patios, barbeque areas, or any concrete surface where a high gloss, protective coating is desired.
Description
Atlas Expo-SealTM is a high performance concrete curing & sealing compound that provides a tough and clear protective coating over exposed concrete surfaces. Expo-SealTM is a unique acrylic co-polymer formulation that will help prevent shrinkage cracks and produce a concrete surface with maximum strength and increased resistance to trafc, moisture and stains. Expo-SealTM is ultraviolet resistant and provides an attractive nish to architectural concrete. This durable concrete treatment enhances the beauty of colored concrete, exposed aggregate and stone.
20-FORMING ACCESSORIES
50-FLATWORK ACCESSORIES
Atlas Expo-SealTM is ideal for application on exposed aggregate & decorative concrete to provide excellent protection and a wet-look nish.
Read Product Data Sheet & MSDS prior to use.
Description
Atlas Out-Shine Sealer is a heavy-duty, clear, waterbased liquid sealer and dustproofer that is designed to protect and enhance the appearance of exterior or interior concrete, exposed aggregate, brick, masonry and stucco surfaces. This innovative synthetic polymer formulation provides superior surface protection with excellent abrasion resistance in areas of high trafc, resistance to penetration and staining of mild chemicals and acids, and resistance to weathering and corrosion. Out-Shine Sealer is a high-solids product that produces a gloss nish that will not discolor when exposed to sunlight.
PRODUCTS
Uses
Seal and protect concrete, exposed aggregate, brick, masonry and stucco surfaces. Exterior and interior applications. Horizontal and vertical applications. Ideal for shopping plazas, schools, hospitals, factories, stadiums, walkways, patios, swimming pool decks, terrazzo oors, masonry walls, etc. 80- TOOLS & PLACING
94
www.atlasform.com
High Performance, Clear, Water-Based, Penetrating Concrete Hardener, Sealer & Dustproofer
Atlas Elite-HSTM is a colorless, odorless, penetrating, water-based, siliconate solution formulated to seal, densify, harden and dustproof concrete and masonry surfaces. Elite-HSTM uses a chemical reaction to ll the pores in concrete, therefore increasing the abrasion resistance and durability of the concrete and reducing the porosity of the treated surface. This concrete treatment will protect the most abused oors from trafc and wear, and increase resistance to chemicals, water, stains and black tire marks. Elite-HSTM protects, preserves and strengthens concrete and masonry surfaces while providing a permanent lowgloss satin sheen nish that is very easy to clean and maintain.
Uses
Ideal for warehouses, distribution centers, industrial plants, factories, food processing plants, maintenance facilities, schools, hospitals, shopping centers, retail oors, showrooms, restaurants, parking structures, garages, airports, stadiums, etc. Interior and exterior applications. New and aged concrete and masonry applications.
Atlas Elite-HSTM is easily applied to concrete surfaces with brooms, squeegees or bufng machines to provide a very durable concrete oor with an attractive low-gloss sheen nish that is easy to clean and maintain.
Maintenance
Elite-HSTM develops a low-gloss, integral shine that will last the lifetime of the concrete. The more trafc the concrete gets, the better it will look! For an immediate shine, a oor buffer may be used. Treated concrete surfaces are easily cleaned with a mop and warm, soapy water or a scrubbing machine.
70- FOUNDATION
PRODUCTS
Warranty
Atlas provides a 20 year anti-dusting guarantee against the effects of wear and abrasion for oors treated with Elite-HSTM. Contact your local Atlas representative for details.
Packaging 5 gallon pails 55 gallon drums Product Code 30.12.13525 30.12.13535
www.atlasform.com
95
Contractor Committed.
Description
Atlas Easy-Lift FDTM is a high-performance, chemically reactive, water-based, fast drying cure and bondbreaker for tilt-up and precast construction. Easy-Lift FDTM is applied to the concrete casting slab to efciently prevent the bonding of subsequent concrete pours. This premium-grade bondbreaker contains organic compounds that react with the concrete to produce a water impermeable barrier on the surface of the casting slab. When the tilt-up panel is poured, the barrier restricts the casting slab from absorbing the mix water from the panel, resulting in an easy to lift panel and a strong, smooth, uniform and clean panel appearance. This fast drying formulation allows crews to complete work more quickly and produces cleaner panels by reducing occurrence of dirt accumulation on the casting slab. Easy-Lift FDTM meets all VOC regulations.
Atlas Easy-Lift FDTM is a fast-drying formulation that allows contractors to quickly get back on the slab to form panels and place reinforcing steel. It also minimizes the accumulation of dirt and dust on the surface; therefore producing cleaner panels.
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
Atlas Easy-Lift FDTM is the premier bondbreaker on the market to produce a clean and easy panel lift. In addition to the bondbreakers, Atlas provides contractors with a complete tilt-up package, including inserts, brace rentals, engineering, etc.
70- FOUNDATION
PRODUCTS
Maintenance
Atlas Easy-Lift bondbreakers leave no residue on the concrete surface. Once all panels have been lifted and placed, the walls may be patched, painted or coated. Follow the surface preparation & application instructions of these other applied materials. The concrete oor, if left exposed, may be sealed with Atlas Elite-HSTM. This concrete hardener & sealer will provide a very durable concrete oor with an attractive low-gloss sheen nish that will last the lifetime of the concrete. See Elite-HSTM product data sheet for additional information.
Coverage
Cure Coat: 400 ft2 per gal. 1st Bondbreaker Coat: 500 - 700 ft2 per gal. 2nd Bondbreaker Coat: 550 - 700 ft2 per gal.
Packaging 5 gallon pails 55 gallon drums Product Code 30.15.10525 30.15.10535
96
www.atlasform.com
Description
Atlas Easy-Lift is a high-performance, chemically reactive, water-based cure and bondbreaker for tilt-up and precast construction. Easy-Lift ETM is applied to the concrete casting slab to efciently prevent the bonding of subsequent concrete pours. This premium-grade bondbreaker contains organic compounds that react with the excess lime in concrete. The reaction produces a gel in the pores of the concrete which effectively forms a water impermeable barrier. When the tilt-up panel is poured, the barrier restricts the casting slab from absorbing the mix water from the panel, which results in an easy to lift panel and a strong, smooth, uniform and clean panel appearance. Easy-Lift ETM meets all federal and local VOC regulations. ETM
Coverage
Cure Coat: 400 ft2 per gal. 1st Bondbreaker Coat: 500 - 700 ft2 per gal. 2nd Bondbreaker Coat: 550 - 700 ft2 per gal.
Read Product Data Sheet & MSDS prior to use.
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
Premium Solvent-Based Cure & Bond Breaker for Tilt-Up & Precast
PRODUCTS
Coverage
Cure Coat: 400 ft2 per gal. 1st Bondbreaker Coat: 500 - 700 ft2 per gal. 2nd Bondbreaker Coat: 550 - 700 ft2 per gal.
Read Product Data Sheet & MSDS prior to use.
www.atlasform.com
97
Construction Chemicals
Contractor Committed.
ATLAS CITRUS-CLEAN
Strong & Safe Citrus-Based, Multi-Purpose Cleaner, Degreaser & Stripper
Description
Atlas Citrus-Clean is a strong and environmentally safe concrete cleaner, degreaser and stripper. Formulated from orange peels and designed as a multi-purpose cleaning solution, Citrus-Clean may be used on concrete surfaces to remove oil spills, grease, black tire marks, curing compounds, cutback adhesives and other stubborn materials and stains. Citrus-Clean will not etch the concrete surface, has a pleasant citrus scent, and is easily rinsed-away with water.
Uses
Effectively cleans concrete surface of oil spills, grease, black rubber tire marks, stains and other stubborn contaminants. Ideal for warehouses, industrial plants, factories, parking garages, airport runways, loading docks, and shipping & receiving areas. Strips curing compounds and oor sealers. Removes un-cured epoxies from tools and equipment. Prepares concrete surfaces for application of sealers and overlays. Interior and exterior applications.
Read Product Data Sheet & MSDS prior to use.
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
98
www.atlasform.com
Surface Retarder
ATLAS TOP-ETCH
Description
Atlas Top-Etch is an easy to use, liquid surface retardant that is sprayed onto fresh concrete to produce beautiful exposed aggregate concrete atwork. Top-Etch is designed to retard the set of portland cement at the surface while the concrete below the surface cures normally. This treatment provides an excellent economical architectural nish highlighting the natural color and texture of the aggregates. Top-Etch is available in regular (blue) or deep (red) strengths.
20-FORMING ACCESSORIES
Uses
30-ATLAS TECH PRODUCTS Exposes the aggregate in fresh concrete on oor slabs, sidewalks, entryways, driveways, patios, pool decks, etc. Ideal for shopping plazas, schools, stadiums, lobbies, residences, or any concrete atwork where an economical architectural nish is desired. Provides a roughened surface for bonding subsequent coatings or treatments to the concrete. Interior and exterior applications. Atlas Top-Etch is easy to apply & provides a consistent & economical exposed aggregate architectural nish for driveways, patios, shopping plazas, sidewalks, etc. After Top-Etch application, protect the exposed aggregate concrete with an application of Atlas Expo-SealTM.
Features
Economical treatment to concrete atwork that provides an excellent architectural nish highlighting the original color and texture of the aggregates. Consistent and uniform results. Easy to use spray-apply formulation with a fugitive dye for identication of treated areas. No expensive equipment needed for application. Cleans-up with water. Much cleaner and less expensive than sandblasting. May be used with colored concrete. Water-based formulation; no odor and no acid residue.
Read Product Data Sheet & MSDS prior to use.
PRODUCTS
www.atlasform.com
99
Contractor Committed.
ATLAS ACRYL-BOND
Acrylic Latex Bonding Agent & Admixture for Portland Cement, Patching Materials and other construction products.
20-FORMING ACCESSORIES
Uses
Mix with repair mortars, patching materials, grouts, masonry coatings and other cement-based products for increased adhesion and durability. Bonding new concrete to aged concrete. Bonding stucco, mortar or plaster to sound surfaces. Interior and exterior applications. Above and below grade applications. Ideal for use with patching materials for concrete oors, walkways, ramps, walls, columns and beams.
Read Product Data Sheet & MSDS prior to use.
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
ATLAS H2 BOND
Description
Atlas H2 Bond is a next generation cement bonding agent and admixture specically formulated to increase the exural, bond and early and overall compressive strength of modied mixes. Both lab testing and eld applications show increased strengths, and more durable, long lasting patches will be achieved. Atlas H2 Bond can be used as an admixture to greatly enhance the adhesion of cement mortars as well as improve resistance to oil, water, salt and chemical penetration. Atlas H2 Bond exhibits excellent resistance to freeze/thaw cycles and can be used for interior or exterior applications.
70- FOUNDATION
PRODUCTS
Uses
Bonding new concrete to old concrete in interior or exterior applications. Designed for use with cementitious compositions such as patching materials, grouts, masonry coatings, stucco coatings and masonry mortars to increase chemical resistance and performance.
Read Product Data Sheet & MSDS prior to use.
100
www.atlasform.com
ATLAS TECH-BOND
Premium, Re-emulsiable Ethyl-Vinyl Acetate Bonding Agent
Description
Atlas Tech-Bond is a premium, high-solids, re-emulsiable, ethyl-vinyl acetate (EVA) emulsion for use as a bonding agent or admixture when placing concrete, repair mortars, patching materials, underlayments, grouts, masonry coatings and other cement-based products. Tech-Bond establishes a superior bond strength when compared to acrylic or PVA bonding agents. Tech-Bond provides an extended open time for placement of concrete, repair mortars, patching materials, stucco and plaster, and is ideal for use as a primer prior to placing self-leveling underlayments. This bonding agent may be applied up to 7 days prior to pouring, patching or coating, and will re-emulsify only 1 time within 7 days of application. Tech-Bond is an easy to use product that improves the adhesion, compressive, tensile and exural strengths of cement-based materials.
Uses
Bonding new concrete to aged concrete. Bonding patching materials to concrete, masonry or brick. Mix with repair mortars, patching materials, grouts, masonry coatings and other cement-based products for increased adhesion and durability. Use as a primer prior to placing self-leveling underlayments. Interior or exterior applications.
Read Product Data Sheet & MSDS prior to use.
ATLAS INTER-BOND
Re-emulsiable, Poly-Vinyl Acetate Bonding Agent & Admixture for Portland Cement, Patching Materials & other construction products
Description
Atlas Inter-Bond is a general purpose, re-emulsiable, poly-vinyl acetate emulsion for use as a bonding agent or admixture for repair mortars, patching materials, underlayments, grouts, masonry coatings, and other cement-based products. Inter-Bond provides increased adhesion and an extended open time for placing concrete, coatings and other toppings to existing concrete or other sound substrates for dry interior applications. This bonding agent may be applied up to 24 hours prior to pouring, patching or coating. Inter-Bond is an easy to use product that improves the adhesion, compressive, tensile and exural strengths of cementbased materials.
PRODUCTS
Uses
Mix with repair mortars, underlayments, patching materials, masonry coatings & other cement-based or gypsum-based products for increased adhesion & durability. Bonding new concrete to aged concrete. Bonding stucco, mortar or plaster to sound surfaces. Dry interior applications. Will bond to concrete, brick, tile, stone, block, plaster, gypsum board, lath or plywood.
www.atlasform.com
101
Contractor Committed.
20-FORMING ACCESSORIES
UNITEX PRO-POXY 300 UNITEX PRO-POXY 300 FAST UNITEX PRO-POXY 400
DELAMINATION REPAIR HAIR LINE CRACKS (0.05 - 0.2 MM) FINE CRACKS (0.2 - 0.5 MM)
ATLAS E-PRO SEAL SLV ATLAS INJECTION RESIN 175 ATLAS LV INJECTION EPOXY UNITEX PRO-POXY 100 ATLAS EPOXY BONDER ATLAS HI-MOD EPOXY GEL UNITEX PRO-POXY 300 UNITEX PRO-POXY 300 FAST ATLAS HI-MOD EPOXY GEL UNITEX PRO-POXY 300 UNITEX PRO-POXY 300 FAST
40-BAR SUPPORTS
CRACK INJECTION
CRACKS (0.5 - 0.8MM) WIDE CRACKS & VOIDS ( > 0.8 MM)
50-FLATWORK ACCESSORIES
ATLAS EPOXY JOINT FILLER ATLAS E-PRO OVERLAY ATLAS TECH-DECK ATLAS E-PRO SEAL SLV ATLAS TECH SEAL HMWM
SEALING
OVERLAYS FOR BRIDGES, PARKING DECKS, ETC. CONCRETE SURFACES & CRACK HEALER-SEALER FOR BRIDGES, PARKING DECKS, ETC.
70- FOUNDATION
PRODUCTS
Atlas Injection Resin 175 is a very low viscosity epoxy that will penetrate hairline cracks.
Atlas LV Injection Epoxy is a 100% solids easy to pump injection resin to structurally restore concrete structures.
102
www.atlasform.com
Description Atlas Injection Resin 175 is a two-component, 100% solids, high modulus, high strength, very low viscosity epoxy resin adhesive for multiple uses. Injection Resin 175 is an ideal material for repairing concrete cracks to structurally restore the integrity of concrete structures. This moisture tolerant epoxy provides excellent penetration of concrete cracks by pressure injection or by gravity-feed methods. Injection Resin 175 conforms to ASTM C-881 specications. Uses Pressure-inject horizontal, vertical or overhead cracks for a structural repair of concrete structures. Gravity-feed horizontal concrete and masonry cracks. Grout anchor bolts, dowels and reinforcing steel. Mix with aggregate to repair concrete spalls and voids as an epoxy repair mortar. Seal interior slabs and exterior above grade slabs to protect concrete and reinforcing steel from moisture, chlorides and chemical attack. Bonding new concrete to hardened concrete or patching materials to hardened concrete. Bonding wood, masonry & other construction materials. Interior or exterior applications.
Features of Atlas Injection Resin 175 Excellent bond strength to many materials. Moisture tolerant to allow for application on both dry or wet surfaces. Super low-viscosity (175 cps) consistency for deep penetration of concrete cracks. High-modulus for superior strength. Good chemical resistance to protect concrete slabs and decks. Low odor formulation. Proven eld performance. Technical Data & Specications ASTM C-881: Types I, II, IV & V, Grade 1, Classes B & C. Meets USDA specications for use in food processing areas. VOC Compliant. Cures to a transparent amber color. See Testing Data Chart for test results.
Packaging 1.5 quart kits (3 - 0.5 quart cans) 3 gallon kits (3 - 1 gal. cans) 15 gallon kits (3 - 5 gal. pails) 165 gallon kits (3 - 55 gal. drums) 30.20.12523 Product Code
30.20.12530
50-FLATWORK ACCESSORIES
Description Atlas LV Injection Epoxy is a two-component, 100% solids, high modulus, high strength, low viscosity epoxy resin adhesive for multiple uses. LV Injection Epoxy is an ideal material for repairing concrete cracks to structurally restore the integrity of concrete structures. This moisture tolerant epoxy provides excellent bond strength for grouting dowels & bolts and may also be mixed with aggregate to produce a high strength, fast-setting mortar. LV Injection Epoxy conforms to ASTM C-881 specications. Uses Pressure-inject horizontal, vertical or overhead cracks for a structural repair of concrete structures. Grout anchor bolts, dowels and reinforcing steel. Mix with aggregate to repair concrete spalls and voids as an epoxy repair mortar. Seal interior slabs and exterior above grade slabs to protect concrete and reinforcing steel from moisture, chlorides and chemical attack. Bonding new concrete to hardened concrete or patching materials to hardened concrete. Bonding wood, masonry & other construction materials. Interior or exterior applications.
Features of Atlas LV Injection Epoxy Excellent bond strength to many materials. Moisture tolerant to allow for application on both dry or wet surfaces. Low-viscosity (500 cps) consistency for deep penetration of concrete cracks. High-modulus for superior strength. Good chemical resistance to protect concrete slabs and decks. Low odor formulation. Proven eld performance. Technical Data & Specications ASTM C-881: Types I, II, IV & V, Grade 1, Classes B & C. Meets USDA specications for use in food processing areas. VOC Compliant. Cures to a transparent amber color. See Testing Data Chart for test results.
Packaging 1.5 quart kits (3 - 0.5 quart cans) 3 gallon kits (3 - 1 gal. cans) 15 gallon kits (3 - 5 gal. pails) 165 gallon kits (3 - 55 gal. drums) Product Code
PRODUCTS
www.atlasform.com
103
Contractor Committed.
20-FORMING ACCESSORIES
Features of Atlas Epoxy Bonder Excellent bond strength to many materials. Moisture tolerant to allow for application on both dry or wet surfaces. Sets rapidly for early strength. Easy to use, low odor, 1:1 mix ratio. Cures to a concrete gray color. Proven eld performance. Technical Data & Specications ASTM C-881, Types I, II, IV & V, Grade 2, Classes B & C. VOC Compliant See Product Data Sheet for test results
Packaging 2 quart kits (2 - 1 quart cans) 2 gallon kits (2 - 1 gal. cans) 10 gallon kits (2 - 5 gal. pails) 110 gallon kits (2 - 55 gal. drums) 30.20.10522 30.20.10527 Product Code
100% Solids, High Strength, Medium Viscosity, Multi-Purpose Epoxy Adhesive With a Long Pot Life
Features of Atlas LPL Epoxy Bonder Excellent bond strength to many materials. Extended pot life for ease of application; especially useful during high ambient temperatures. Moisture tolerant to allow for application on both dry or wet surfaces. Tough coating protects reinforcing steel from moisture and chlorides. May be spray-applied. Cures to a concrete gray color. Low odor formulation. Proven eld performance. Technical Data & Specications ASTM C-881, Types I, II & V, Grade 2, Classes B & C. VOC Compliant See Product Data Sheet for test results
Packaging 1.5 quart kits (3 - 0.5 quart cans) 3 gallon kits (3 - 1 gal. cans) 15 gallon kits (3 - 5 gal. pails) 165 gallon kits (3 - 55 gal. drums) Product Code 30.20.11013 30.20.11023 30.20.11030
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
104
www.atlasform.com
Description
Atlas Hi-Mod Epoxy Gel is a two-component, 100% solids, high modulus, high strength, non-sag, multipurpose epoxy gel adhesive. Hi-Mod Epoxy Gel is an excellent material for structural bonding of concrete, steel, wood, masonry and other materials. This moisture tolerant epoxy gel is the ideal consistency to seal cracks and set injection ports prior to injecting cracks with epoxy. Hi-Mod Epoxy Gel is easy to use for horizontal, vertical or overhead concrete repair applications and conforms to ASTM C-881 specications. Also available in a paste consistency.
Uses
Structural bonding of concrete, steel, wood, masonry and other materials. Chemical anchoring for bolts, dowels, pins, etc. Seal cracks and set injection ports for pressure-injection of concrete cracks. Pressure-inject cracks for a structural repair of concrete structures. Mix with aggregate to repair concrete spalls and voids as a non-sag epoxy repair mortar. Horizontal, vertical and overhead applications. Interior or exterior applications.
40-BAR SUPPORTS
2 gallon kits (2 - 1 gal. cans) 10 gallon kits (2 - 5 gal. pails) 110 gallon kits (2 - 55 gal. drums)
30.20.11522 30.20.11527
EPOXY VISCOSITIES
Material
50-FLATWORK ACCESSORIES
Atlas Epoxy Bonder is a medium viscosity bonding agent that is easy to broom-apply; ideal for bonding new concrete to old concrete. Use the LPL Epoxy Bonder for up to an 8 hour open time at 700F!
Viscosity in Centipoise (CPS) 1 3 < 50 85-140 140-420 175 500 650-900 1,000
Water Milk E-Pro Seal SLV SAE 10 Motor Oil SAE 20 Motor Oil Injection Resin 175 LV Injection Epoxy SAE 40 Motor Oil Castor Oil
PRODUCTS
Atlas Hi-Mod Epoxy Gel is a non-sag viscosity and is ideal for setting injection ports and cap sealing.
E-Pro Overlay Epoxy Joint Filler Epoxy Bonder Karo Syrup LPL Epoxy Bonder Honey Ketchup Sour Cream Peanut Butter Hi-Mod Epoxy Gel
www.atlasform.com
105
Contractor Committed.
Description
Atlas Epoxy Joint Filler is a two-component, 100% solids, self-leveling, high strength, semi-rigid epoxy joint ller for industrial concrete oors. This moisture tolerant and easy to use joint ller provides ultimate support and protection for saw-cut or formed control joints in concrete oors that are subjected to hard-wheeled vehicle trafc.
20-FORMING ACCESSORIES
Uses
Fill and seal control and construction joints (saw-cut or formed) in concrete slabs. Fill and repair spalls or cracks in concrete oors and joint nosings. New concrete oors or joint restoration projects. Ideal for industrial and commercial oors, warehouses, distribution centers, factories, food processing plants, maintenance facilities, parking structures, etc. Interior applications.
Packaging 2 gallon kits (2 - 1 gal. cans) 10 gallon kits (2 - 5 gal. pails) 110 gallon kits (2 - 55 gal. drums)
Coverage
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
70- FOUNDATION
PRODUCTS
f oo s -pr joint ick l , p tro ag con n-s g no llin ions! a in g & cat ble ealin appli ila s ty r va i o a on fo ecur ls ti s A la in mu for
Atlas Epoxy Joint Filler is a self-leveling joint sealant that will protect joint edges from spalling & deterioration otherwise caused by forklifts, pallet jacks, etc. Very easy to apply with a caulking gun and cures to a gray color!
Read Product Data Sheet & MSDS prior to use.
106
www.atlasform.com
Joint Sealants
20-FORMING ACCESSORIES
Uses
Caulk and seal expansion and contraction joints, tilt-up panels, precast concrete elements, metal curtain walls, perimeter door and window framing, etc. Use as an elastic construction adhesive for materials with different coefcients of expansion. Vertical or horizontal applications. New construction or restoration projects. Interior or exterior applications.
Read Product Data Sheet & MSDS prior to use.
Description
Atlas Flex-Thane 230 SL is a one-component, selfleveling, polyurethane construction sealant that cures to a tough, exible, watertight rubber when exposed to moisture present in the atmosphere. This easy-to-use, highly resilient elastomeric material is capable of +/- 25% joint movement, making it ideal for sealing all horizontal joints that are subject to contraction and expansion. Flex-Thane 230 SL exhibits excellent adhesion to concrete, wood, glass and metal.
Uses
Caulk and seal expansion and contraction joints, parking decks, pavements, sidewalks, plazas, patios, driveways, malls, or other areas subject to foot and light vehicle trafc. Use as an elastic construction adhesive for materials with different coefcients of expansion. Horizontal applications. New construction or restoration projects. Interior or exterior applications.
Read Product Data Sheet & MSDS prior to use.
70- FOUNDATION
PRODUCTS
30.28.11510
www.atlasform.com
107
Contractor Committed.
Super Low Viscosity, Two-Component, Epoxy Healer/Sealer for Protection of New Concrete or Repair of Concrete Cracks
Uses
Penetrate, ll and seal concrete cracks in bridge decks, parking structures, or other areas subject to chemical attack, harsh weather and heavy trafc. Delamination repair by gravity-feed method. Consolidation of porous and dusting surfaces. Interior or exterior, above grade applications. May also be used for slab-on grade in non-freezing climates.
20-FORMING ACCESSORIES
40-BAR SUPPORTS
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
E-Pro Seal SLV is very easy to mix and apply. The two components are completely safe to mix together with a drill & mix paddle and then apply by ood coat over the surface with a broom or squeegee. A sand is broadcasted over the treated surface to absorb any material that did not penetrate into the concrete.
Read Product Data Sheet & MSDS prior to use.
108
www.atlasform.com
Polymer Overlay
100% Solids, High Strength, Low Modulus, Low Viscosity Epoxy Binder for Polymer Concrete Overlays & Patching
20-FORMING ACCESSORIES
Uses
Concrete bridge deck overlays, parking structures, or other concrete surfaces subject to heavy trafc, abrasion, thermal movements and chemical attack. Mix with aggregate for a high strength polymer concrete mortar. Expansion joint nosing repairs. Low-modulus bonding agent. Interior or exterior applications. 30-ATLAS TECH PRODUCTS
After the deck surface is cleaned, Atlas E-Pro Overlay is easily applied to the deck with a notched squeegee.
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
After the Atlas E-Pro Overlay is applied, broadcast a clean, hard, angular aggregate to provide good skid resistance. (See your Atlas representative for aggregate recommendations)
PRODUCTS
A nished bridge lane after being treated with Atlas E-Pro Overlay. The overlay is applied at approximately 3/8 thick.
www.atlasform.com
109
Contractor Committed.
ATLAS TECH-DECK
Description
Tech-DeckTM
TM
Uses
Concrete bridge deck overlays, parking structures, or other concrete surfaces subject to heavy trafc, abrasion, thermal movements and chemical attack. Mix with aggregate for a high strength polymer concrete patching mortar. Expansion joint nosing repairs.
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
Atlas is high-strength, rapid-setting, water impermeable polyester concrete patch and overlay material for the rehabilitation of concrete bridge decks, parking structures, highways, and other concrete surfaces that are exposed to heavy trafc, abrasion, harsh weather and chemical attack. Tech-DeckTM is composed of a polyester resin binder and select aggregates to provide a durable wearing surface that is resistant to moisture, chlorides and other chemicals that would otherwise penetrate the concrete and corrode steel reinforcement. Tech-DeckTM cures rapidly, allowing fast return to lane service.
20-FORMING ACCESSORIES
TM
Atlas Tech-Seal high molecular weight methacrylate is applied as a primer before placing Atlas Tech-DeckTM. As shown above, the methacrylate is applied to the clean bridge deck surface with brooms. Contact your Atlas representative for further information on methacrylate sealers.
Provides excellent protection from moisture, chlorides and other harmful contaminants. Protects the concrete and steel reinforcement from corrosion, providing a longer service life for bridges, parking structures, etc. Superior abrasion and skid resistance to provide a safe and durable riding surface. Rapid curing to minimize trafc disruption. Trafc is returned to lanes within 4 hours of application. Very dense surface protects bridge deck from extreme wear, including snow chain abrasion/snow plow equipment. Greater tensile strength and elongation than competitive overlays. Resilient and shock-absorbing overlay does not crack or delaminate, even through extreme freeze/thaw cycles. Signicantly reduces future bridge deck maintenance and repair costs. Low viscosity resin is easy to mix, place and nish. Can modify cure time for specic jobs and temperatures. Stronger than portland cement concrete. Greater bond strength, protection and service life than latex-modied concrete and silica fume concrete. Provides an attractive nish to bridge decks, parking structures, etc. Proven eld performance. Meets California Air Resource Board (CARB).
70- FOUNDATION
PRODUCTS
Atlas Tech-DeckTM may be placed using a vibrating screed as shown on the left, or with a mobile mixing & paving system as shown above. Specic jobsite conditions will determine which application equipment is best suited for a successful placement.
110
www.atlasform.com
Non-Shrink Grouts
Description
Atlas Construction Grout is a blend of portland cement, natural aggregates and special additives to provide a non-shrink, non-metallic, non-corrosive, non-gas forming grout for multiple applications. Construction Grout is a owable and pumpable grout that will provide maximum bearing area for proper support and load transfer for column baseplates, precast & tilt-up panels, and other structural grouting applications.This high strength grout may be mixed to a range of consistencies, from dry-pack to uid, to provide contractors with a quality, multi-use grout.
20-FORMING ACCESSORIES
Uses
Structural column baseplates. Machinery, equipment and pump baseplates. Precast walls and tilt-up panels. Anchor bolts and dowels.
Yield
Approximately 0.43 ft3 per 50 lb. bag when mixed with 4.0 quarts of water. At 1 thickness, one 50 lb. bag will cover approximately 5.2 ft2. When one 50 lb. bag is mixed with 4.0 quarts of water & 25 lbs. of 3/8 pea gravel, yield is approximately 0.61 ft3 .
Packaging 50 lb. bag (63 bags per pallet) Product Code 30.30.10060
40-BAR SUPPORTS
ATLAS HI-FLOW GROUT Non-Shrink, Non-Metallic, High Flow, Precision Cement-Based Grout
Description
Atlas Hi Flow Grout is a high strength, highly uid, non-shrink, non-metallic precision grout composed of specially graded natural aggregates, quality cements and proprietary admixtures. Hi Flow Grout provides high compressive strength for applications ranging from damp-pack to uid, and has a long working time to meet difcult requirements for the most demanding job conditions. This structural grout is very easy to pump.
50-FLATWORK ACCESSORIES
Uses
Grouting applications that require precision alignment. Large, tight clearance areas requiring a highly uid pumpable grout to ll entire void. Structural grouting of steel & precast columns & beams. Machinery, equipment and pump baseplates. Crane rails. Grouting anchors, dowels, rods, bolts and inserts. Grouting post-tension cables and cable anchorages.
Yield
Approximately 0.45 ft3 per 50 lb. bag when mixed with 4.5 quarts of water. At 1 thickness, one 50 lb. bag will cover approximately 5.4 ft2. When one 50 lb. bag is mixed with 4.5 quarts of water & 25 lbs. of 3/8 pea gravel, yield is approximately 0.63 ft3 .
70- FOUNDATION
PRODUCTS
30.30.10560
www.atlasform.com
111
Non-Shrink Grouts
Contractor Committed.
High Performance, High Early & Ultimate Strength, Non-Shrink, Non-Metallic Cement-Based Precision Grout
20-FORMING ACCESSORIES
40-BAR SUPPORTS
Yield
Approximately 0.43 ft3 per 50 lb. bag when mixed with 4.0 quarts of water. At 1 thickness, one 50 lb. bag will cover approximately 5.2 ft2. When one 50 lb. bag is mixed with 4.0 quarts of water & 25 lbs. of 3/8 pea gravel, yield is approximately 0.61 ft3 .
Uses
Grouting applications that require a high early and/or ultimate compressive strength. Grouting applications that require precision alignment. Structural grouting of steel & precast columns & beams. Machinery, equipment and pump baseplates. Crane rails. Grouting anchors, dowels, rods, bolts and inserts. Power plants, water treatment plants, manufacturing facilities, amusement park rides, or any other heavy repetitive loading applications.
70- FOUNDATION
PRODUCTS
Uses
Grouting large, extremely tight clearane areas that require a grout with no sand for high uidity and ease of pumping. Structural grouting of columns, beams and concrete piles. Grouting anchors, dowels, rods, bolts and inserts. Grouting post-tension cables, tendons, and cable anchorages.
Packaging 50 lb. bag (63 bags per pallet) 3,000 lb. Supersack Product Code
Atlas N-A Grout is a special blend of high quality cements and admixtures to provide a non-aggregate, high ow, high strength, non-shrink, non-metallic precision grout. N-A Grout is a unique formulation that may be pumped through extremely tight clearance areas and over large distances. This easy to use grout demonstrates high compressive and exural strengths for maximum grouting performance. N-A Grout provides high uidity and a long working time to meet tough requirements for the most demanding job conditions.
Read Product Data Sheet & MSDS prior to use.
112
www.atlasform.com
Description
Atlas Tech Patch 5 is a rapid-setting, ready to use, concrete repair material for general purpose patching and restoration. This portland cement-based patching material is formulated with special hardeners, aggregates and set accelerators to repair, resurface and restore concrete surfaces. Tech Patch 5 may be used for vertical, overhead and horizontal applications, and is easy to shape and shave to match existing concrete surfaces. Tech Patch 5 develops twice the strength of typical concrete and provides good resistance to freeze/thaw cycles and weathering.
20-FORMING ACCESSORIES
Uses
Concrete pipe and other precast concrete products. Patching concrete columns, walls and beams. Curbs, sidewalks, driveways, steps & manholes. Large concrete cracks. Vertical, overhead and horizontal applications. Interior, exterior, above or below grade applications. Repairs from featheredge to 1 thick per lift.
Yield
Approximately 0.54 ft3 per 50 lb. bag when mixed with 3.5 quarts of water. At 1/4 (0.64 cm) thickness, one 50 lb. bag will cover approximately 26 ft2.
Packaging 50 lb. bag (63 bags per pallet) Product Code 30.32.10060
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
Description
Atlas Tech Patch 20 is a rapid-setting, ready to use, concrete repair material for general purpose patching and restoration. This portland cement-based patching material is formulated with special hardeners, aggregates and set accelerators to repair, resurface and restore concrete surfaces. Tech Patch 20 may be used for vertical, overhead and horizontal applications, and is easy to shape and shave to match existing concrete surfaces. Tech Patch 20 develops twice the strength of typical concrete and provides good resistance to freeze/thaw cycles and weathering.
70- FOUNDATION
PRODUCTS
Uses
Concrete pipe and other precast concrete products. Patching concrete columns, walls and beams. Curbs, sidewalks, driveways, steps & manholes. Large concrete cracks. Vertical, overhead and horizontal applications. Interior, exterior, above or below grade applications. Repairs from featheredge to 1 thick per lift.
Yield
Approximately 0.54 ft3 per 50 lb. bag when mixed with 3.5 quarts of water. At 1/4 (0.64 cm) thickness, one 50 lb. bag will cover approximately 26 ft2.
www.atlasform.com
113
Contractor Committed.
ATLAS TECH-H2
Description
Two-Component, High Strength, Polymer Modied, Cement Based, Concrete Repair Mortar with an Integral Corrosion Inhibitor
Atlas Tech-H2 is a polymer modied, cement-based, two-component, fast-setting concrete repair mortar. This high performance structural repair mortar provides excellent durability and superior adhesion for horizontal concrete patching and overlays. Tech-H2 provides excellent workability and is formulated with Ferrolok, a penetrating corrosion inhibitor that helps prevent deterioration caused by chlorides, moisture and other harmful materials. Tech-H2 cures to a concrete gray color to blend with surrounding concrete surfaces and is ideal for areas that are subject to heavy trafc, abrasion and harsh weather.
20-FORMING ACCESSORIES
Uses
Heavy-duty concrete patching and overlays. Trowelable or Form & pour applications; Adjust H2 liquid polymer to acheive desired consistency. Horizontal surfaces on, above and below grade. Structural repair applications such as airport runways, parking garages, warehouse oors, manufacturing plants, maintenance facilities, loading docks, walkways, bridges, tunnels, driveways and ramps. Surfaces subject to freeze/thaw cycles. Repairs up to 1 neat; up to 4 per lift extended with aggregate. Available in a H2 Fine formualtion for easy featheredge application. Interior and exterior applications.
Atlas Tech-H2 is a high strength polymer modifed concrete repair that will withstand extreme trafc and harsh weather. It can accept walking trafc in less than 2 hours of application, heavy trafc within 4 - 6 hours. Tech-H2 worked excellent for the Marines to repair spalled areas on this military base in Southern California.
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
Atlas Tech-H2 is very easy to mix and may be placed with a trowel or screed. This versatile repair material may be mixed to different consistencies to suite specic project requirements. Cures to a concrete gray color to blend with surrounding concrete surfaces.
Yield
Approximately 0.43 ft3 per unit - 50 lb. bag mixed with 1 gallon of H2 Bond. At 1/4 thickness, one unit will cover approximately 20 ft2 . Extended: Approximately 0.58 ft3 per unit extended with 25 lbs. 3/8 pea gravel. At 1 thickness, one extended unit will cover 7 ft2.
Packaging 1 gal. jug H2 50 lb. bag (63 bags per pallet) H2 Fine 50 lb. bag (63 bags per pallet) Product Code 30.25.10520 30.32.11060 30.32.11160
70- FOUNDATION
PRODUCTS
114
www.atlasform.com
Atlas Pro-1 Patch is a fast-setting, high performance, easy to use structural concrete repair material. This onecomponent, trowelable concrete patch develops high compressive strength, bond strength and exural properties to hold up to heavy trafc and freeze/thaw cycles. Pro-1 Patch has been designated for exterior horizontal trafc bearing applications, but also performs well for structural patching of walls, columns, beams or other heavy duty concrete repairs. Pro-1 Patch offers good resistance to oils, de-icing salts and other chemicals to help prevent future corrosion and additional repairs.
20-FORMING ACCESSORIES
Uses
Ideal for patching and repairing concrete highways, bridge decks, parking structures & ramps, airport runways, loading docks and warehouse & industrial oors or other heavy duty applications. Structural repair for walls, columns & beams where a trowable high strength material is required. Repairs up to 3 deep neat; or add pea gravel for deeper repairs. Interior, exterior, horizontal and vertical applications.
Packaging 50 lb. bag (63 bags per pallet) Product Code 30.32.12560
Yield
40-BAR SUPPORTS Approximately 0.43 ft3 per 50 lb. bag when mixed with 4.5 quarts of water. At 1/2 thickness, one 50 lb. bag will cover approximately 10 ft2. Extended: Approximately 0.58 ft3 per unit extended with 15 lbs. 3/8 pea gravel. At 3 thickness, one extended bag will cover approximately 2.3 ft2.
50-FLATWORK ACCESSORIES
Very Fast Setting, Heavy-Duty, Flowable Concrete Repair Mortar For Trafc Bearing Applications
Uses
Ideal for patching and repairing concrete highways, bridge decks, parking structures, airport runways, loading docks and warehouse & industrial oors. Flowable mortar for form & pour applications. Full-depth structural repairs from 1/2 - 6 deep. Grout and anchor dowels, pins and bolts. Horizontal, exterior and interior applications.
Yield
Approximately 0.41 ft3 per 50 lb. bag when mixed with 3.0 quarts of water. At 1 thickness, one 50 lb. bag will cover approximately 5 ft2. Extended: Approximately 0.58 ft3 per unit extended with 25 lbs. 3/8 pea gravel. At 1 thickness, one extended bag will cover approximately 7 ft2.
Packaging Product Code 30.32.12060
70- FOUNDATION
PRODUCTS
www.atlasform.com
115
Contractor Committed.
Description
Atlas E-Pro Patch is a three-component, 100% solids, high strength, low modulus, non-shrink, multi-purpose polymer concrete patching mortar for concrete repair. E-Pro Patch is a convenient pre-packaged repair system that consists of a high quality epoxy resin, curing agent and an engineered blend of graded aggregates to provide a superior concrete patching material. This moisture tolerant epoxy mortar cures rapidly for minimum downtime of trafc areas. This semi-rigid epoxy formula allows for excellent shock absorption when exposed to heavy trafc, abrasion and freeze-thaw cycles.
20-FORMING ACCESSORIES
Uses
Concrete patching for bridge decks, parking structures, industrial oors, airport runways, loading docks, piers, or other concrete surfaces subject to heavy trafc, abrasion, thermal movements and chemical attack. Expansion joint nosing repairs. Low-modulus concrete repair for spalls. Interior or exterior applications.
Packaging 0.5 ft3 unit (1/2 Gal A. 1/2 Gal B & 60 lb. bag of aggregate) 2.0 ft3 unit (1/2 Gal A. 1/2 Gal B & 4 - 60 lb. bags of aggregate) Product Code 30.32.17580 30.32.17585
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
ATLAS TECH-TOP
Self-Leveling Trafc-Bearing Floor Topping for Interior Applications
Description
Atlas Tech-Top is a heavy-duty, cement-based, nonshrinking, self-leveling oor topping designed to produce a durable, trafc-bearing surface. This one-component product is a free-owing pumpable material that is easy to apply and requires minimal labor and installation time. Tech-Top provides a walkable surface within 4 hours of application and will accept light trafc after 24 hours. Also available in a white color, which provides an excellent base material for application of concrete stains.
Uses
Produce a level trafc-bearing oor topping over new or existing concrete surfaces. Level concrete oors, ceramic tile, terrazzo and wooden oors. Resurface rough, old, unlevel or poorly nished concrete surfaces. Interior applications. New or old concrete surfaces. Ideal for industrial oors, ofces, schools, hospitals, restaurants, and residential oor surfaces that will be exposed to trafc. Applications from featheredge to 1 neat; up to 4 per lift extended with aggregate.
Packaging 50 lb. bag Product Code 30.35.11560
70- FOUNDATION
PRODUCTS
Yield
Approximately 0.43 ft3 per 50 lb. bag when mixed with 4.5 quarts of water. At 1/4 thickness, one 50 lb. bag will cover approximately 21 ft2. Extended: Approximately 0.55 ft3 per unit extended with 15 lbs. 3/8 pea gravel. At 1 thickness, one extended unit will cover approximately 6.5 ft2.
Read Product Data Sheet & MSDS prior to use.
116
www.atlasform.com
Self-Leveling Toppings
ATLAS TECH-TOP MT
Concrete Resurfacing Material for Interior or Exterior Applications
Description
Atlas Tech-Top MT is cement-based polymer modied micro-topping for concrete surfaces. Teck-Top MT is a thinly applied resurfacer that closely resembles the look of natural concrete and will provide a new wearing surface over damaged concrete. Atlas Tech-Top MT is available in 2 grades, MT-F for the ne smoother nishes, and MT-R for coarser or broom nish textures.
20-FORMING ACCESSORIES
Uses
Re-surface concrete that is worn, pitted or spalled. Trafc bearing applications. Exterior or interior applications. Horizontal or vertical applications. New or old concrete surfaces. Ideal for plazas, patios, parking decks, walkways, driveways, garage oors, and other residential and commercial concrete surfaces.
Packaging 50 lb. bag (60 bags per pallet) Product Code
Yield
Approx. 30-60 ft2 per 40 lb. bag when mixed with 3.0 quarts of water and applied at 1/8 to 1/16 thick.
40-BAR SUPPORTS
ATLAS TECH-TOP-EXT
Self-Leveling Trafc-Bearing Floor Topping for Exterior Applications
Description
Atlas Tech-Top EXT is a heavy-duty, cement-based, nonshrinking, self-leveling oor topping designed to produce a durable, trafc-bearing surface for exterior or interior applications. This one-component product is a free-owing pumpable material that is easy to apply and requires minimal labor and installation time. Tech-Top EXT provides a walkable surface within 4 hours of application and will accept light trafc after 24 hours.
50-FLATWORK ACCESSORIES
Uses
Produce a level trafc-bearing oor topping over new or existing concrete surfaces. Level concrete slabs, ceramic tile, terrazzo and wooden oors. Resurface rough, old, unlevel or poorly nished concrete surfaces. Exterior or interior applications. New or old concrete surfaces. Ideal for loading docks, parking decks, garage oors, industrial oors, patios, walkways, driveways, or other surfaces that will be exposed to trafc and weather. Applications from featheredge to 1/2 neat; up to 1-1/2 per lift extended with aggregate.
Read Product Data Sheet & MSDS prior to use.
Yield
Approx. 0.52 ft3 per 50 lb. bag when mixed with 4.0 quarts of water. At 1/4 thickness, one 50 lb. bag will cover approximately 25 ft2. Extended: Approx. 0.62 ft3 per unit extended with 25 lbs. 3/8 pea gravel. At 1/2 thickness, one extended unit will cover approximately 14 ft2.
Packaging 50 lb. bag (60 bags per pallet) Product Code
70- FOUNDATION
PRODUCTS
www.atlasform.com
117
Self-Leveling Underlayment
Contractor Committed.
Description
Atlas Tech-Level Premier is a high-performance, cement-based, self-leveling oor underlayment designed to produce a smooth, level and hard surface prior to the placement of oor coverings. This one-component, non-shrink underlayment exhibits superior owability for an extremely easy installation. Tech-Level Premier will reduce labor costs, minimize placement time and produce a new substrate that will quickly accept installation of resilient ooring, carpet, ceramic tile, wood ooring, or other trafc bearing coverings. This fast-track underlayment provides a walkable surface within 4 hours of application and will accept oor coverings after 14 hours.
Prior to the application of Atlas Tech-Level Premier, the substrate is primed with an Atlas approved primer, such as Atlas Tech-Bond or Inter-Bond. The primer is easily applied with a broom and assures a good bond of Tech-Level Premier.
20-FORMING ACCESSORIES
Uses
Create a smooth, level and hard surface prior to the placement of oor coverings. Level concrete oors, ceramic tile, terrazzo and wooden oors. Resurface rough, unlevel or poorly nished concrete. Interior, above and below grade applications. New or old concrete surfaces. Ideal for ofces, schools, hospitals, restaurants, and residential oor surfaces that are to be resurfaced with carpet, tile or other oor coverings. Applications from featheredge to 1 neat; up to 4 per lift extended with aggregate.
40-BAR SUPPORTS
Atlas Tech-Level Premier is a self-leveling material that can be poured from a bucket or placed with a pump. This free-owing material requires minimal labor, as the product lls low spots to create a level, smooth and hard surface prior to the placement of oor coverings.
50-FLATWORK ACCESSORIES
PRODUCTS
Yield
Approximately 0.51 ft3 per 50 lb. bag when mixed with 4.5 quarts of water. At 1/4 thickness, one 50 lb. bag will cover approximately 24 ft2. Extended: Approximately 0.60 ft3 per unit extended with 15 lbs. 3/8 pea gravel. At 1 thickness, one extended unit will cover approximately 7.0 ft2. ChemGrouts high-efciency sprayer/nisher is ideal for pouring underlayments or spraying cementitous coatings. The two 45-gallon mixing tanks, large holding hopper and centrally located controls allow continuous production with a single operator. The ChemGrout CG-502 is the perfect choice along with Atlas Tech Level Premier when you have a large underlayment job!
118
www.atlasform.com
Description
Atlas Feather Coat is an innovative, high performance trowelable underlayment that is used as a skim coat to provide a smooth surface and level oor prior to the installation of oor coverings. This polymer modied material may be used for interior applications on concrete, terrazzo, wood, ceramic tile, VCT and also over non-water soluble cutback adhesives on existing concrete. Feather Coat is fast-drying and will be ready to accept installation of ooring materials, such as carpet, tile, VCT & sheet vinyl as soon as patch is dry, which is typically within 15-20 minutes.
20-FORMING ACCESSORIES
Uses
Provide a smooth, hard & level surface over rough, damaged or unlevel concrete prior to the installation of oor coverings. Patch over concrete, terrazzo, wood, tile, VCT or cutback adhesives. Ideal for fast-track projects where oor coverings need to be installed as soon as possible. Applications from featheredge to 1/4 thick per lift. Interior applications.
Yield
Approximately one 10 lb. bag of Feather Coat will cover approximately 33 ft2 at 1/8 thickness. Depending on the condition of the substrate, one bag will typically cover 150-200 ft2.
Packaging 10 lb. bag Product Code 30.32.13551
40-BAR SUPPORTS
ATLAS DURA-MORTAR
High Performance, Flowable, Shrinkage Compensated, Structural Repair Mortar with an Integral Corrosion Inhibitor
Uses
Ideal for patching and repairing concrete bridges, parking structures, highways, airport runways, loading docks, warehouse & industrial oors, tunnels, piers, docks and dams. Free-owing mortar for form & pour applications or for hard to reach areas. Areas subjected to heavy trafc, abrasion, harsh weather or freeze/thaw cycles. Full-depth structural repairs from 3/4 - 10 deep.
Description
Atlas Dura-Mortar is a high-performance, owable, dense and resilient concrete repair mortar that exhibits high compressive strength, excellent exural properties and superior shear bond strength. This free-owing mortar is easy to place, has an extended set time, and is ideal for form & pour applications that require deep repairs for deteriorated or spalled horizontal, vertical or overhead surfaces. Dura-Mortar contains Ferrolok, an integral corrosion inhibitor that will reduce corrosion in the repaired area and adjacent concrete to provide a long service life of repair.
50-FLATWORK ACCESSORIES
PRODUCTS
Atlas Dura-Mortar was used to repair this 14 tall x 14 deep void; the application took less than 2 hours, and forms were stripped the next morning. The surface was then ready to accept waterproong.
Read Product Data Sheet & MSDS prior to use.
www.atlasform.com
119
Contractor Committed.
One-Component, High Strength, Polymer Modied Concrete Repair with a Corrosion Inhibitor for Vertical & Overhead Applications
20-FORMING ACCESSORIES
Uses
Structurally repair vertical, overhead or horizontal concrete structures. Ideal for repairing deteriorated concrete in parking structures, water treatment plants, bridge structures, tunnels, dams, docks, piers, ramps, and all concrete pipes, walls, ceilings & columns. Surfaces subject to freeze/thaw cycles. Repairs from 1/8 to 2 per lift. Interior or exterior applications, above or below grade.
Read Product Data Sheet & MSDS prior to use.
40-BAR SUPPORTS
Yield
Approximately 0.43 ft3 per 50 lb. bag mixed with 9.5 pints of water. At 1/4 thickness, one 50 lb. bag will cover approximately 20 ft2 .
Packaging 50 lb. bag (63 bags per pallet) Product Code 30.32.15560
50-FLATWORK ACCESSORIES
Description
Atlas Structural Repair Mortar V & O is a high strength, two-component, polymer modied, cement-based, non-sag, fast-setting concrete repair mortar. This high-performance mortar is easily placed on vertical and overhead surfaces without the use of forms. Structural Repair Mortar V & O is a unique non-shrink formulation that is very durable and will withstand harsh weather conditions and freeze/thaw cycles.
PRODUCTS
Uses
Structurally repair vertical, overhead & horizontal concrete and masonry surfaces. Ideal for restoration of parking garages, water treatment plants, bridges, tunnels, dams, docks, piers, concrete pipes, walls, ceilings & columns. Repairs from 1/8 to 2 per lift. Interior, exterior, above and below grade applications.
Read Product Data Sheet & MSDS prior to use.
Yield
Approximately 0.41 ft3 per unit, consisting of one 50 lb. bag mixed with 1 gallon of Structural Repair Liquid polymer. At 1/4 thickness, one 50 lb. bag will cover approximately 20 ft2.
Packaging 50 lb. bag & 1 gal. jug Product Code 30.32.15860
120
www.atlasform.com
Extremely Smooth, High Polymer Resurfacing and Finishing Compound for Vertical Concrete Surfaces
Atlas V/R Patch is an innovative, high performance patching and resurfacing material designed to repair concrete surfaces that are rough, damaged or discolored. V/R Patch is a high polymer, cement based coating that contains no sand to provide an extremely smooth consistency for easy application and maximum product performance. This surface treatment has excellent bond strength and is ideal for rubbing, smoothing and resurfacing vertical or overhead surfaces that have bug holes, voids, spalls, dents, cracks etc. This easyto-use concrete repair product dies quickly to provide a bondable surface for paints and coatings and provide for fast job completion.
20-FORMING ACCESSORIES
Yield
One 10 lb. pail will cover approximately 65 ft2 at 1/16 thickness. Depending on the condition of the concrete surface, one pail will typically cover 100-150 ft2.
Packaging 7 lb. pail 10 lb. bag Product Code 30.32.16050 30.32.16051
40-BAR SUPPORTS
Description
Atlas Smoothcrete Plus is a specially formulated patching and resurfacing material designed for repairing and restoring concrete surfaces. Excellent for rubbing, smoothing and resurfacing horizontal, vertical or overhead surfaces for thin patching applications. Smoothcrete Plus is a unique blend of portland cement, dry polymers and special additives to provide the ultimate smooth-nish patching material. This easy-to-use concrete repair product has excellent bond strength, weather resistance, and provides a bondable surface for paints and coatings.
Uses
Resurface rough, damaged or discolored concrete and masonry surfaces. Repair voids, honeycombs, holes, small cracks, etc. Ideal for patching tilt-up panels and precast concrete. Provides a smooth and hard surface that may be painted or treated with architectural coatings. Horizontal, vertical and overhead applications. Trowelable underlayment for future oor coverings. Applications from featheredge to 1/8 thick. Interior and exterior applications.
Working Time (730F): 40 minutes Set Time: Initial - 2 hours; Final - 4 - 5 hours Compressive Strength: 1 day - 900 psi 3 days - 1,300 psi 7 days - 2,800 psi 28 days - 3,950 psi
PRODUCTS
Yield
One 50 lb. bag will cover approximately 100 ft2 at 1/16 thickness.
Packaging 40 lb. bag (63 bags per pallet) Product Code 30.32.16558
www.atlasform.com
121
Contractor Committed.
ATLAS TECH-321
Description
Atlas Tech-321 is a specially formulated patching and coating material designed for repairing and restoring concrete surfaces. Formulated with dry polymers, Tech-321 has excellent workability and adhesion to the substrate, and cures to a hard and smooth nished surface. Ideal for rubbing, smoothing and resurfacing all horizontal, vertical or overhead concrete surfaces for thin patching and coating applications. Tech-321 is blended with white and gray portland cement, very ne aggregates and special additives to provide a smooth nish over rough, damaged or discolored concrete. This easy to use, one component product has excellent weather resistance and cures to a concrete gray color to blend with existing surfaces and leave an attractive concrete nish.
20-FORMING ACCESSORIES
Uses
Renish exposed concrete walls, beams, ceilings, columns, steps, walkways and patios. Resurface rough, damaged or discolored concrete and masonry surfaces. Repair voids, honeycombs, holes, small cracks, etc. Horizontal, vertical and overhead applications. Applications from featheredge to 1/8 thick. Interior and exterior applications.
Yield
One 50 lb. bag will cover approximately 100 ft2 at 1/16 thickness.
Packaging 50 lb. bag (63 bags per pallet) Product Code 30.32.17060
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
ATLAS PLUG
Fast-Setting Hydraulic Cement to Plug Water Leaks
Description
Atlas Plug is a fast-setting hydraulic cement designed to plug uid leaks and stop water seepage in concrete or masonry surfaces. Atlas Plug is a durable, non-corrosive, non-rusting material that is composed of cement and proprietary admixtures. When mixed with water to a putty consistency, Atlas Plug will set in 2-3 minutes and will last the life of the structure.
Uses
Stop water seepage and uid leaks through cracks, faults, crevices and holes in concrete and masonry surfaces. Ideal for concrete pipes, manholes, culverts, storm drains, swimming pools, tunnels, dams, water tanks, sewers, basements, elevator pits, etc. Underwater applications. Vertical and horizontal applications. Interior, exterior, above or below grade applications.
Read Product Data Sheet & MSDS prior to use.
Yield
Approximately 0.50 ft3 per 50 lb. pail
70- FOUNDATION
PRODUCTS
122
www.atlasform.com
ATLAS HYDROSEAL
Cement-Based Waterproong Coating for Concrete & Masonry
Description
Atlas Hydroseal is a cement-based coating material designed to waterproof concrete and masonry surfaces. This protective coating lls and seals the pores and voids in the surface to prevent the migration of moisture and withstand mild hydrostatic pressure. Hydroseal is a single component, non-shrink, breathable coating that is available in a concrete gray color.
20-FORMING ACCESSORIES
Uses
Waterproof concrete, block, brick, stone, stucco and other masonry surfaces. Interior and exterior applications, above & below grade. Ideal for foundations, basement and retaining walls, water reservoirs, bridges and tunnels. Positive and negative side applications.
Atlas Hydroseal is easily applied with a soft-bristled broom, brush or trowel to horizontal or vertical surfaces to seal the pores in concrete and masonry surfaces, effectively preventing the migration of moisture and mild hydrostatic pressure.
PRODUCTS
www.atlasform.com
123
Contractor Committed.
ATLAS TECH-HARD
High Performance Mineral Aggregate Dry-Shake Floor Hardener
Uses Description
Atlas Tech-Hard is a ready-to-use, high performance, mineral aggregate dry-shake oor hardener designed to provide a more abrasion resistant concrete oor surface. This non-metallic, non-rusting hardener is a specially blended mixture of portland cement, natural silica quartz aggregate and proprietary admixtures. Tech-Hard may be used for interior or exterior applications and will conform to oor atness specications. Available in many colors and an energy efcient light reective formulation. Concrete oor installations where a more dense and abrasion resistant surface is required. Ideal for distribution centers, warehouse oors, loading docks, maintenance facilities, industrial plants, aircraft hangars, shopping centers, showroom oors, hospitals, restaurants, etc. Concrete surfaces subjected to forklift trafc, pallet jacks, tool carts or other vehicles and machinery. Floors where a designated atness is specied. Wherever colorful abrasion resistant oors are required. Interior and exterior applications.
20-FORMING ACCESSORIES
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
Atlas Tech-Hard is efciently applied with a laser spreader (above) or a mechanical spreader (below) for accurate application rates. This hardener provides a oor that has more than twice the abrasion resistance than a standard 4,000 psi concrete oor.
Coverage
Coverage will vary depending on the particular trafc volume of the surface: Light Trafc: 0.75 - 1.0 lbs. per ft2 Moderate Trafc: 1.0 - 1.25 lbs. per ft2 Heavy Trafc: 1.25 - 1.5 lbs. per ft2 Colored Floors: 1.5 - 2.0 lbs. per ft2 Light Reective: 1.5 - 2.0 lbs. per ft2
Product Code
A Complete System
70- FOUNDATION
PRODUCTS
Colors
Natural Gray, Light Gray, Battleship Gray, Terra Cotta, Tile Red, Nile Green, Tan, Brown, Black and Light Reective (White). See Dry-Shake Floor Hardeners brochure for color samples.
Atlas offers a complete concrete ooring system to provide the toughness, protection and quality appearance that will impress the most demanding users. Five products to achieve a durable and attractive concrete oor: Atlas Tech-Hard - dry-shake oor hardener Atlas Finish-Film - evaporation retardant Atlas Quantum-Cure - curing compound Atlas Elite-HS - dustproofer/sealer Atlas Epoxy Joint Filler - joint sealant Contact your Atlas representative to discuss how this complete concrete oor system can benet you and your clients.
Read Product Data Sheet & MSDS prior to use.
124
www.atlasform.com
ATLAS TECH-PLATE
Heavy-Duty Metallic Dry-Shake Floor Hardener
Description
Atlas Tech-Plate is a ready-to-use metallic dry-shake oor hardener designed to provide a more abrasion resistant concrete oor surface for heavy trafc and industrial applications. This heavy-duty hardener is a specially blended mixture of portland cement, well-graded iron aggregates and proprietary admixtures to produce a oor surface with 8 times the abrasion resistance over normal concrete. Tech-Plate may be used for interior applications and will conform to oor atness specications. Available in many colors, including an energy efcient light reective formulation and a non-rusting formulation.
Uses
Concrete oor installations where an extremely more dense and abrasion resistant surface is required. Ideal for manufacturing facilities, assembly plants, aircraft hangars, loading docks, industrial plants, distribution centers, warehouses, etc. Concrete surfaces subjected to steel wheel trafc, heavy pin-point loading, forklift trafc, pallet-jacks, tool carts or other vehicles and machinery. Floors where a designated atness is specied. Wherever colorful & extremely abrasion resistant oors are required. Interior applications (A non-rusting formulation is available for exterior applications).
Coverage
Coverage will vary depending on the particular trafc volume of the surface: Heavy Trafc: 1.25 - 1.5 lbs. per ft2 Colored Floors: 1.5 - 2.0 lbs. per ft2 Light Reective: 1.5 - 2.0 lbs. per ft2
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
Abrasion Resistance
0.8
This chart shows the depth of wear, in inches, of several oor surfaces after 60 minutes of abrasion testing, as tested by guidelines of ASTM C-779, Procedure A.
70- FOUNDATION
PRODUCTS
www.atlasform.com
125
Construction Chemicals
Contractor Committed.
EPOXY SYSTEMS
20-FORMING ACCESSORIES
Ports
Pre-Measured Cartridges
Static Mixers
Unitex Quality
Unitex epoxies are manufactured under strict quality control requirements to provide contractors with high performance and reliable epoxy materials.
40-BAR SUPPORTS
Unitex Approvals
Unitex epoxies are approved by numerous state D.O.T.s across the country, including Caltrans, Nevada, Arizona and Colorado. Also approved by City of Los Angeles. ICC Report #5000.
50-FLATWORK ACCESSORIES
70- FOUNDATION
Bulk Containers
PRODUCTS
126
www.atlasform.com
Construction Chemicals
20-FORMING ACCESSORIES 30-ATLAS TECH PRODUCTS 40-BAR SUPPORTS 50-FLATWORK ACCESSORIES 60-PRECAST & TILT-UP
70- FOUNDATION
PRODUCTS
www.atlasform.com
127
Decorative Concrete
Contractor Committed.
DECORATIVE CONCRETE
Design-Crete The Design-Crete System changes normal gray concrete surfaces into an exceptional architectural design. A combination of colors and special tools permanently imprint newly placed concrete with authentic textures. The Design-Crete System provides a textured concrete at a fraction of the cost of comparable natural materials. Detailed stone, brick, wood or tile patterns can be simulated in a variety of colors. Color Hardeners Color hardener is a cementitious dry shake material formulated with carefully balanced and blended pigments, uniform and resistant to discoloration. Color hardener increases the density and durability of the concrete surface, reduces dusting, and minimizes maintenance. Color Releases Color release is a pigmented dry powder release for the stamping tools designed to be used when a mottled, antiqued appearance is desired. It is a pigmented bondbreaker, formulated to prevent stamping tools from sticking to the concrete. Stamping Tools Stamping tools and mats are molded urethane patterns that impart a pattern and texture to colored concrete surfaces. Stamping tools and mats are imprinted in a variety of patterns and textures for creating architectural hardscapes for interior or exterior concrete. Available in rigid, exible and texture mats. Stampable Overlay System The Stampable Overlay System is a stampable cementitious topping for beautifying both interior and exterior concrete surfaces. When stamped, Stampable Overlay creates a texture that duplicates a wide range of stamp designs, tile, cut stone, slate, brick, cobblestone and many other textures.
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
128
www.atlasform.com
Decorative Concrete
DECORATIVE CONCRETE
Spray-Rite Enhance the appearance of existing concrete surfaces with the Spray-Rite concrete texturing system. This system can transform plain, damaged, or stained concrete surfaces into an exciting textured nish. This exclusive Spray-Rite system is based on a high-strength cement coating, specically formulated to resurface existing concrete. It provides a durable, easily maintained and permanent color nish, engineered to withstand temperature extremes and intense sunshine. Patina Stain Color Patina stain is a penetrating reactive stain that produces unique color effects in nished concrete surfaces that simulate natural shadings and aged appearance of stone or masonry. The color effect is unique to each stained surface and cannot be duplicated with other materials. Patina Stain may be applied over smooth troweled concrete, gunite, Design-Crete, Spray-Rite, Stampable Overlay, Integral Color, or most masonry surfaces. The color will not chip, crack or wear off like coatings because the stain penetrates and colors both the surface and the substrate. Integral Color System Integral colors are high purity iron oxide pigments. The pigments easily disperse in the concrete batch to produce uniform color for ready-mix applications. Integral colors provide a uniform color and are UV stable providing excellent fade resistance.
20-FORMING ACCESSORIES 30-ATLAS TECH PRODUCTS 40-BAR SUPPORTS 50-FLATWORK ACCESSORIES 60-PRECAST & TILT-UP
70- FOUNDATION
PRODUCTS
www.atlasform.com
129
REBAR SUPPORTS
10-FORMING & SHORING
Contractor Committed.
REBAR SUPPORT
GTI COMPOSITE SLAB BOLSTER
This lightweight composite slab bolster makes placement of rebar simple and fast. The GTI Slab Bolster is manufactured in 2.5 ft. & 5 ft. lengths and is available in multiple heights, ranging from 3/4 to 4. The GTI Slab Bolster is the premier slab bolster on the market with the following features: Contains sharp needles on bottom of foot to provide excellent stability. Gray color; blends with concrete; also available in black color. Will not rust; continuous corrosion protection, both on job-site and in concrete. Virtually no change in strength in temperatures ranging from 00F to 3000F. Easily snaps together to eliminate overlapping and use of tie-wire. Has 1/8 deep corrugation spaced 1 apart for easy rebar placement. Product Code No. Lightweight and extremely strong. Ideal for elevated slabs, precast vaults, tilt-up panels & more! 40.10.00000
20-FORMING ACCESSORIES
50-FLATWORK ACCESSORIES
40-REBAR SUPPORTS
70- FOUNDATION
PRODUCTS
130
www.atlasform.com
REBAR SUPPORTS
REBAR SUPPORT
40-REBAR SUPPORTS
50-FLATWORK ACCESSORIES
PRODUCTS
www.atlasform.com
131
REBAR SUPPORTS
10-FORMING & SHORING
Contractor Committed.
20-FORMING ACCESSORIES
Side-Form spacer. Designed for medium to heavy duty projects. Multiple hub diameter for rebar sizes #3 to #6. Wider locking hub eliminates racking and will not fall off. Once locked onto rebar, this wheel will not change shape and will always provide uniform cover.
Product Code No. 40.35.00000
SPACE WHEEL
Side-Form spacer. Designed to t a wide-range of bar and wire mesh sizes. Provides minimal surface contact and is lightweight. Covers from 3/8 to 3. Meets all requirements and qualies as a CRSI Class 1 Bar Support.
Product Code No. 40.35.00000
40-REBAR SUPPORTS
E-Z CHAIR
Minimal surface contact. Designed for maximum aggregate ow and concrete consolidation. Has high load capacity and ts up to #8 rebar.
Product Code No. 40.20.00000
50-FLATWORK ACCESSORIES
TOWER CHAIR
Minimal surface contact. Designed for maximum aggregate ow and concrete consolidation. Has high load capacity and ts up to #8 rebar. Tower chair straddles bottom rebar mat in double mat applications.
Product Code No. 40.20.60000
X-CHAIR
70- FOUNDATION
PRODUCTS
Supports rebar and mesh with modest surface contact. Cover height from 1/2 to 2. Meets all requirements and qualies as a CRSI Class 1 Bar Support. Special Order
132
www.atlasform.com
REBAR SUPPORTS
PLAIN DOBIES
Plain dobies come in a number of standard heights, 3/4 to 6, with many of the dobies offering multiple dimensions to meet various cover requirements and are used primarily for spacing the reinforcement off grade or formwork. They are particularly suited for footing and foundation reinforcement work where heavy concentrations of rebar occur. Meets all requirements and Product Code No. qualies as a CRSI Class 1 Bar Support.
40.30.00000
40-REBAR SUPPORTS
WIRE DOBIES
Wire dobies are furnished with two 16 gauge wires for attaching to rebar or mesh. Wire dobies can be used in all concrete slab applications and vertical applications as a side form spacer. Meets all requirements and qualies as a CRSI Class 1 Bar Support. Product Code No.
40.30.00000
50-FLATWORK ACCESSORIES
COMBINATION DOBIES
On-Grade or Below Grade applications. Designed with multiple heights within a single unit. Standard 4000 strength. Additional strength available. Meets all requirements and qualies as a CRSI Class 1 Bar Support.
Product Code No. 40.30.00000
DOWEL DOBIES
On-Grade or Below Grade applications. Uniquely supports two mats of reinforcement when used with 90 degree bent rebar dowel. Dowel hole made to accept #4 rebar, depth of hole is 1/2 from bottom. Standard 4000 PSI. Additional strength available. Ideally suited for heavy rebar mats on-grade. Meets all requirements and qualies as a CRSI Class 1 Bar Support. Product Code No.
40.30.00000
70- FOUNDATION
PRODUCTS
www.atlasform.com
133
REBAR SUPPORTS
10-FORMING & SHORING
Contractor Committed.
D-42
BAG TIES
16 GA. ANNEALED
Length 4 5 Product Code No. 40.70.20400 40.70.20500 40.70.20600 40.70.20700 40.70.20800 40.70.21200 Wt. Lbs. per 100 6.1 6.9 7.8 8.7 11.3 13
20-FORMING ACCESSORIES
6 7 8 12
D-50
DBR COUPLER
Special Order
Rebar Size #4 #5 #6 Thread Dia. 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 Plain Product Code No. Epoxy Product Code No. Wt. Lbs./ Ea. 0.2 0.3 0.4 0.5 0.7 1.1 1.7 2.2
40-REBAR SUPPORTS
#7 #8 #9 #10 #11
50-FLATWORK ACCESSORIES
70- FOUNDATION
134
www.atlasform.com
REBAR SUPPORTS
DOWEL-IN (D-1)
REBAR SIZES #4 THRU #11 CUSTOM FABRICATED PRODUCT
Rebar Size #4 #5 #6 #7 #8 #9 #10 #11 Thread Size 5/8 3/4 7/8 1 1-1/8 1-1/4 1-7/16 1-9/16
D-101
STRAIGHT DOWEL-IN
D-102
90 HOOKED DOWEL-IN 180 HOOKED DOWEL-IN
D-103 D-104
D-108
HEADED DOWEL-IN STRAIGHT DOWEL BAR SPLICER
PRODUCTS
www.atlasform.com
135
REBAR SUPPORTS
10-FORMING & SHORING
Contractor Committed.
D-140
STUDRAIL
Studrail is a cost effective solution to punching shear at column/slab connections. Studrails reduce congestion around the column connections, while at the same time dramatically reducing labor costs. Studrails are typically used in post tension and reinforced concrete slabs with direct loading on the columns. Drop panels, beams and column capitals may be eliminated to allow efcient use of ying forms. Installation of Studrails in foundations will increase the punching shear capacity at the base of the columns and in the pile caps. This can provide signicant reduction in slab thickness and substantial savings in material, excavation and concrete pumping costs. Studrails can also be used in place or hairpins to eliminate congestion in post-tensioned tendon anchorage zones. One Studrail replaces a series of hairpins to provide time, labor and material savings.
40-REBAR SUPPORTS
20-FORMING ACCESSORIES
STUDRAIL SPECIFICATION
Studrail is fabricated with special studs, either studwelded or mechanically crimped to a steel rail. Material Specications: Shear Studs - Low carbon steel, C1015 in accordance with ASTM A108. Yield Strength - 50,000 psi minimum. Tensile Strength - 60,000 psi minimum. Elongation in 2 - 20%
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
SEISMIC PERFORMANCE
Studrail has been extensively tested and proved to withstand seismic movement and maintain connection stability long after other connections systems have failed. Lab test results show that Studrails provide superior ductility and lateral drift capacity compared to other systems.
136
www.atlasform.com
REBAR SUPPORTS
D-250
3.9 4.5 6.3 8.0 10.2 9.0 11.5 14.0 16.5 27.1
1.0 1.8 3.5 4.1 7.6 11.4 15.5 20.5 26.0 60.0
0.5 0.5 0.5 0.5 0.625 0.75 0.75 0.75 0.75 0.75
40-REBAR SUPPORTS
Meets or exceeds Min. 135% Fy, CAL TRANS Service ICBO Type 1 Available in Epoxy and Electro-Galvanized.
50-FLATWORK ACCESSORIES
The D-250 Bar-Lock L-Series is similar to the Standard Coupler but is designed for use when higher loads are required. L-Series couplers are available in rebar sizes #4 through #14 and exceed 160% of specied yield of Grade 60 rebar. L-Series couplers are approved for use by most state DOTs, are recognized as an ICC Type 2 seismic splice, and meet ACT specications. L-Series couplers are also available in transition sizes, weldable half couplers and epoxy coated.
Coupler Designation 4L 5L 6L 7L 8L 9L 10L 11L 14L For Use On Rebar Size (in. mm) #4-13M #5-16M #6-19M #7-22M #8-25M #9-29M #10-32M #11-36M #14-43M Product Code No. 40.60.10400 40.60.10500 40.60.10600 40.60.10700 40.60.10800 40.60.10900 40.60.11000 40.60.11100 40.60.11400 Outside Dia (in.) 1.3 1.7 1.9 1.9 2.2 2.9 2.9 3.1 3.5 Length Wt. Lbs. Bolt Qty. 3 3 4 5 5 4 5 6 7 Head Size Nominal Shear Torque 40 80 80 80 180 280 410
PRODUCTS
410 410
Meets or exceeds Min. 160% Fy, CAL TRANS Service ICBO Type 1, ICBO Type 2 Available in Epoxy and Electro-Galvanized.
www.atlasform.com
137
REBAR SUPPORTS
10-FORMING & SHORING
Contractor Committed.
K-4 K-5
40-REBAR SUPPORTS
20-FORMING ACCESSORIES
*EP DWL = EPOXY DOWELS EP DWL/PE = EPOXY DOWELS WITH PATCHED ENDS FULL EP = COMPLETE EPOXY COATING TE = COMPLETE TECTYL-505 COATING
50-FLATWORK ACCESSORIES
70- FOUNDATION
AIRPORT
PRODUCTS
138
www.atlasform.com
REBAR SUPPORTS
K-6
K-7
40-REBAR SUPPORTS
DOWEL ALIGNER
Special Order
Dowel Size 3/4 1 Product Code No. Wt. Lbs. per 100 8.0 10.0 Packaging 250
K-8
50-FLATWORK ACCESSORIES
250
K-11
PRODUCTS
www.atlasform.com
139
REBAR SUPPORTS
10-FORMING & SHORING
Contractor Committed.
K-11
DOWEL CAPS
Crimp Type Sizes 5/8 x 5 3/4 x 5 1 x 5 1-1/8 x 5 1-1/4 x 5
20-FORMING ACCESSORIES
Welded Type Sizes 3/8 x 5 1-1/8 x 6 1/2 x 5 1-1/4 x 5 5/8 x 5 1-3/8 x 6 3/4 x 5 1-1/2 x 6 7/8 x 5 1-3/4 x 6 1 x 5 2 x 6
Welded style Dowel Cap Flanges must be notched back when installing caps on dowels in baskets
K-12
BASKET CLIP
FOR DOWEL BASKETS
Style Wrap-Around Product Code No. Wt. Lbs. 8.7 6.0
40-REBAR SUPPORTS
Nail-Down
K-13
50-FLATWORK ACCESSORIES
70- FOUNDATION
PC-200
140
www.atlasform.com
REBAR SUPPORTS
REBAR FABRICATION
REBAR
Reinforcing Weights According to Area #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #4 #4 #4 #4 #4 #4 #4 #5 #5 #5 #5 #5 #5 @ 6 on center each way @ 8 on center each way @ 9 on center each way @ 12 on center one way @ 12 on center each way @ 14 on center each way @ 15 on center each way @ 16 on center each way @ 18 on center one way @ 18 on center each way @ 24 on center one way @ 24 on center each way @ 9 on center each way @ 12 on center one way @ 12 on center each way @ 18 on center one way @ 18 on center each way @ 24 on center one way @ 24 on center each way @ 5 on center each way @ 8 on center each way @ 9 on center each way @ 12 on center each way @ 15 on center each way @ 18 on center each way 1.544# sq. ft. 1.24# sq. ft. 1.078# sq. ft. .399# sq. ft. .799# sq. ft. .706# sq. ft. .62# sq. ft. .625# sq. ft. .269# sq. ft. .539# sq. ft. .199# sq. ft. .399# sq. ft. 1.86# sq. ft. .714# sq. ft. 1.43# sq. ft. .482# sq. ft. .964# sq. ft. .375# sq. ft. .75# sq. ft. 5.37# sq. ft. 3.25# sq. ft. 2.891# sq. ft. 2.217# sq. ft. 1.834# sq. ft. 1.45# sq. ft. 13.86# sq.yd. 11.16# sq.yd. 9.70# sq.yd 3.59# sq.yd. 7.19# sq.yd. 6.35# sq.yd. 5.58# sq.yd. 5.63# sq.yd. 2.42# sq.yd. 4.85# sq.yd. 1.79# sq.yd. 3.59# sq.yd. 16.74# sq. yd. 6.43# sq. yd. 12.87# sq. yd. 4.34# sq. yd. 8.68# sq. yd. 3.38# sq. yd. 6.75# sq. yd. 48.33# sq. yd. 29.25# sq. yd. 26.019# sq. yd. 19.953# sq. yd. 16.506# sq. yd. 13.05# sq. yd. Bar Size Designation #3 #4 #5 #6 #7 #8 ASTM Standard Reinforcing Bars Area* Sq. Inches .11 .20 .31 .44 .60 .79 Weight Pounds per ft. .376 .668 1.043 1.502 2.044 2.670 Diameter* Inches 3/8 1/2 5/8 3/4 7/8 1
PRODUCTS
FABRICATED REBAR
Denver, CO
www.atlasform.com
141
REBAR SUPPORTS
10-FORMING & SHORING
Contractor Committed.
50-FLATWORK ACCESSORIES
40-REBAR SUPPORTS
20-FORMING ACCESSORIES
Common Stock Styles New Designation (by W-number) SHEETS 7 X 20 6 x 6 - W2.9 x W2.9 6 x 6 -W1.4 x W1.4 SHEETS 8 X 20 4 x 4 -W4.0 x W4.0 4 x 4-W2.9 x W2.9 4x4x4x4 4x4x6x6 6x6x4x4 6x6x6x6 6x6x8x8 6 x 6 x 10 x 10 40.53.10404 40.53.10406 40.53.20604 40.53.20606 40.53.20608 40.53.20610 85 62 58 42 29 21 6x6x6x6 6 x 6 x 10 x 10 40.53.24606 40.53.24610 Old Designation (by steel wire gauge) Product Code No. Weight Approx. per 100 S. F.
70- FOUNDATION
PRODUCTS
142
www.atlasform.com
FLATWORK ACCESSORIES
CURB FORMS
70- FOUNDATION
STREET SMART
The Street Smart Forming System is ideal for applications that include sideways, driveways, curb and gutters, pavements, footings and industrial slabs. Standard forms available in 10 lengths, with heights ranging from 4 to 24.
PRODUCTS
www.atlasform.com
143
FLATWORK ACCESSORIES
Contractor Committed.
STEEL STAKES
1/2 x 1 FLAT
Length 12 18 24 30 36 42 Product Code No. 50.15.50012 50.15.50018 50.15.50024 50.15.50030 50.15.50036 50.15.50042 50.15.50048 Wt. Lbs. 1.74 2.70 3.65 4.61 5.56 6.51 7.47 9.33
20-FORMING ACCESSORIES
48 60
11/16 SQUARE
Length Length Product Code No. 50.15.40012 50.15.40018 50.15.40024 50.15.40030 50.15.40036 50.15.40042 50.15.40048 Wt. Lbs. 1.24 1.92 2.61 3.29 3.97 4.65 5.33 6.67 12 18 24 30 36 42 48 60 12 18 24 30 36 42
3/4 ROUND
Product Code No. With Hole 50.15.23012 50.15.23018 50.15.23024 50.15.23030 50.15.23036 50.15.23042 50.15.23048 Product Code No. Without Holes 50.15.22012 50.15.22018 50.15.22024 50.15.22030 50.15.22036 50.15.22042 50.15.22048 Wt. Lbs. 1.24 1.92 2.61 3.29 3.97 4.65 5.33 6.67
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
48 60
1/2 x 1 FLAT
11/16 SQUARE
3/4 ROUND
70- FOUNDATION
PRODUCTS
144
www.atlasform.com
FLATWORK ACCESSORIES
20-FORMING ACCESSORIES
70- FOUNDATION
PRODUCTS
www.atlasform.com
145
FLATWORK ACCESSORIES
Contractor Committed.
20-FORMING ACCESSORIES
G-28
SCREED BRACKET
FOR 3/4 DIA. ROUND STAKES
Screed Size Product Code No. 50.15.10001 Wt. Lbs. per 100 66.6 54.1 Packaging 100 per carton 100 per carton
40-BAR SUPPORTS
G-29
SCREED BRACKET
FOR 3/4DIA. SQUARE STAKES
Screed Size 2 x 4 Lumber Product Code No. 50.15.10001 Wt. Lbs. per 100 63.9 Packaging 100 per carton
50-FLATWORK ACCESSORIES
Used for supporting headers on 3/4 round screed post. Nail support bracket to header. Set screw rmly clamps against screed post.
70- FOUNDATION
PRODUCTS
Screed Pad
Product Code No. 50.15.20009 50.15.20012 50.15.20015 50.15.20018 50.15.20021 50.15.20024 50.15.20030 5015.20036
146
www.atlasform.com
FLATWORK ACCESSORIES
SCREED KEY
STAKES NOT INCLUDED (SEE G-37) 24 GA. MATERIAL
Slab Thickness 4 5 6 Actual Height 3-1/2 4-1/2 5-1/2 Product Code No. 50.16.10004 50.16.10005 50.16.1006 Wt. Lbs. per 100 LF 37.0 45.0 54.0
G-33
Standard Packaging 3-1/2 Screed Key 40 bundles of 100 ft. per skid of 4,000 ft. 4-1/2 Screed Key 40 bundles of 100 ft. per skid of 4,000 ft. 5-1/2 Screed Key 30 bundles of 100 ft. per skid of 3,000 ft. Available only in full packages of 100 ft.
LOAD KEY
STAKES NOT INCLUDED (SEE G-37)
Slab Thickness 8 10 to 12 Actual Height 7-1/2 9-1/2 Product Code No. 50.16.10108 50.16.10110 Wt. Lbs. per 100 LF 71.0 86.0
G-34
Standard Packaging 7-1/2 Load Key 20 bundles of 100 ft. per skid of 2,000 ft. 9-1/2 Load Key 20 bundles of 100 ft. per skid of 2,000 ft. Available only in full packages of 100 ft.
40-BAR SUPPORTS
G-35
70- FOUNDATION
Standard Packaging 12 Stakes 60 cartons of 100 per skid of 6,000 pieces. 15 Stakes 60 cartons of 100 per skid of 6,000 pieces. 18 Stakes 48 cartons of 100 per skid of 4,800 pieces. 24 Stakes 40 cartons of 100 per skid of 4,000 pieces.
PRODUCTS
www.atlasform.com
147
FLATWORK ACCESSORIES
Contractor Committed.
E-1
20-FORMING ACCESSORIES
E-2
RISER FRAMES
FOR SLAB ON FILL Special Order
Size H height 15 max
E-3
RISER FRAMES
SLOPING SLAB Special Order
Size H height 15 max W width 18 max
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
E-7
CUT WASHER
Bolt Dia. 1/2 Dimension 1-3/8 x 3/32 2 x 5/32 2-1/2 x 3/32 3 x 3/32 Plain Product Code No. 20.30.80704 20.30.80504 20.30.80304 20.30.80204 20.30.80104 Galvanized Product Code No. Wt. Lbs. per 100 4.4 10.3 16.7 21 3/4 1 1-1/4 1-1/2
70- FOUNDATION
D-15
PRODUCTS
PAPER TUBING
Nominal Tube Dia. 3/8 1/2 5/8 3/4 1 Product Code No. 40.45.28012 40.45.27012 40.45.26012 40.45.25012 40.45.23012 Wt. Lbs. per 100 2.6 4.7 5.7 6.4 7.5 Approx. Ft. per Box 500 400 300 200 100
148
www.atlasform.com
FLATWORK ACCESSORIES
EXPANDED POLYSTYRENE
4 x 8 Sheets Thickness 1/2 3/4 1 1-1/2 2 2-1/2 3 3-1/2 4 5 6 Product Code No.
20-FORMING ACCESSORIES
50.30.10050 50.30.10075 50.30.10100 50.30.10150 50.30.10200 50.30.10250 50.30.10300 50.30.10350 50.30.10400 50.30.10500 50.30.10600
50-FLATWORK ACCESSORIES
Coefficient of thermal expansion Effective temperature-continuous range intermittant Compression strength 10% deflection Flexural strength Capillarity Water vapor transmission Water absorption (by volume) Bond strength-Portland cement (in shear) gypsum plaster
PRODUCTS
830 530
www.atlasform.com
149
FLATWORK ACCESSORIES
Contractor Committed.
313
Length (in.) 19.60 Wt. Lbs. 1.1 Locking Device 2840.25A
20-FORMING ACCESSORIES
Slotted Steel Grates Product Code No. 2420 2440 Proof Load PSI 150 150 Material Galvanized Steel 18-8 Stainless Steel Length (in.) 39.19 39.19 Wt. Lbs. 6.0 6.0 Locking Device 2811A 2841A
Reinforced Perforated Heel-Proof Grates Product Code No. Load Class A-B A-B Material Galvanized Steel 18-8 Stainless Steel Length (in.) 39.19 39.19 Wt. Lbs. 8 8 Locking Device 2810A 2840A
40-BAR SUPPORTS
2412 2454
410
420
422
Material Stainless Steel Heavy Duty Frame Stainless Steel Overlay Rails
50-FLATWORK ACCESSORIES
2459
2501
Longitudinally Slotted Grates Product Code No. 2504 Proof Load PSI 600 Material Ductile Iron Length (in.) 19.6 Wt. Lbs. 10.0 Locking Device 2811B
Product Code No. 2505 2506
Ornamental Ductile Iron Gate Proof Load PSI 300 300 Material Ductile Iron Ductile Iron Length (in.) 19.6 19.6 Wt. Lbs. 10 7 Locking Device 2811B 2811B
70- FOUNDATION
PRODUCTS
530 Frame & Grate Assemblies Product Code No. 2532 2534 Proof Load PSI 600 600 Material Gray iron (class 30) and 502 style Gray iron (class 30) frame and ductile iron longitudinally-slotted grate Length (in.) 19.6 19.6 Wt. Lbs. 30 25 Locking Device 2815F 2815F
510 MFFAF Fabrication/End Frame Product Code No. 2510MFFAF Load Class N/A Material Ductile Iron Length (in.) 19.6 Wt. Lbs. 9.0 Locking Device N/A
Note: One is required at each end run, one at each tee, two are required at 90 turn.
502
504
150
www.atlasform.com
FLATWORK ACCESSORIES
Ornamental ADA Heel-Proof Grate/Frame Product Code No. 2564 Proof Load PSI 600 Material Ductile Iron Length (in.) 19.6 Wt. Lbs. 12 Locking Device N/A
20-FORMING ACCESSORIES
All ductile iron grates and frames available with galvanized coating. All ductile and cast grates have compatible anchor frames.
720
722
70- FOUNDATION
PRODUCTS
www.atlasform.com
151
FLATWORK ACCESSORIES
Contractor Committed.
Non-sloping channel locations - All have 100 mm (4) and 150 mm (6) vertical outlet.
All runs should terminate with nos. 050, 100, 150, 200, 250, 300 or any non-sloping channel (nos. 021, 091, or 291) at outlet or deep end. Any channel may serve as shallow end.
40-BAR SUPPORTS
The PolyDrain Trench Drain System consists of 30 interlocking channels, each one meter (39.19) long. Special non-sloping channels can be inserted at specied intervals in order to extend channel runs. Catch basins, horizontal outlet plates, closed end plates and vertical outlet plate adapters can be installed at designated locations. Closed end plates terminate channel runs. NOTE: Always begin at the appropriate outlet channel, working towards the shallow end.
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
152
www.atlasform.com
FLATWORK ACCESSORIES
VAPOR RETARDERS
20-FORMING ACCESSORIES
2) ASTM E-1993, the more stringent (lower perm rating) specication for critical area use: PREMOULDED MEMBRANE VAPOR SEAL with Plasmatic Core. - Underslab Vapor Barrier - 0.0011 perm rating Seven-ply, weather coated, permanently bonded, semi-exible bituminous core board. Provides a positive, easy to install, economical, true vaporproong and waterproong system for horizontal applications. The product is the ultimate when a true vapor seal is required. Helps meet and maintain the maximum slab moisture transfer rate of 3 lbs./1,000 sq. ft./24 hours, allowed by the ooring industry specications.
Packaging: Ultra 15 - 1,440 sq. ft. rolls (144 x 120); 7.3 lbs. per 100 sq. ft. Thickness is 15 mils. Ultra 10 - 3,000 sq. ft. rolls (15 x 200); 4.8 lbs. per 100 sq. ft. Thickness is 10 mils. Ultra 6 - 3,000 sq. ft. rolls (240 x 150); 2.8 lbs. per 100 sq. ft. Thickness is 6 mils. Moistop Tape Moistop Tapes excellent adhesive properties help assure tight joints and smooth underslab installations while maintaining the vapor retarding characteristics required by ASTM E-1745 specications. Available in 4 inch wide x 108 foot rolls. The Boot The Boot is engineered to help in the installation of underslab vapor retarders around pipes. It makes installations easier while maintaining the integrity of the vapor retarding layer and jobsite durability. Its unique design makes sealing around pipes, conduits and other penetrations of any size quick and easy.
PRODUCTS
www.atlasform.com
153
FLATWORK ACCESSORIES
Contractor Committed.
/ Ultracure SUN
TM
UltraCure NCFTM and Ultracure SUNTM are moistureretaining coverings that are natural colored cellulose fabrics with a 3 mil clear (NCF) or reective (SUN) impervious coating applied to one side. Ultracure SUNTM has a non-perforated reective vapor barrier coating designed to help provide protection against UV degradation. Both non-staining fabrics have a tensile strength meeting ASTM D-882 and a mimimum retention capacity of 6.5(g). Material shall meet or exceed ASTM C171-03, ASTM C171-97a and AASHTO M171-00, standard specications for sheet material for curing concrete slabs or pavement.
ASTM Test Method ASTM D-2103 ASTM D-5199 ASTM D-882 ASTM D-882 ASTM D-1992 ASTM D-1709 ASTM E-1447
20-FORMING ACCESSORIES
Tensile
TD MD
UltraCureDOTTM
UltraCureDOTTM features super absorbant bers that effectively trap water and serve as a hydrating reservoir for the slab as it cures. UltraCureDOTTM also features a perforated white reective poly backing which provides constant visual reinforcement that the slab remains wet for the entire curing period. With proper installation, UltraCureDOTTM provides constant hydration and maintains a 100% relative humidity condition on the slab for the entire 14 day curing period.
40-BAR SUPPORTS
Superior Hydration Increased cured concrete strength User Friendly Cost Effective Green- LEEDs points & recyclable Greater blanket wind resistance
Product Description UltraCure DOT Product Code No. 50.65.30100 Packaging 8 x 100 roll
McTech EZ Cover
EZcoverTM is a natural colored cellulose fabric designed to help protect slab-on-grade or other Product Code No. ooring during the construction process. The 50.66.30050 product is available in standard width 8 rolls weighing approximately 100 lbs each with each roll covering approximately 400 square feet on application. Property Value ASTM Test Method
Basis Wt. Caliper Tensile Dart 1200 g/sm 3.18mm TD-8100psi MD-8800psi 2300g 81% ASTM D-2103 ASTM D-5199 ASTM D-882 ASTM D-1709 ASTM E-1447
70- FOUNDATION
Reectance
PRODUCTS
Synthetic Burlene
Combination of synthetic burlap alternative and reinforced polyethylene cover. ASTM C-171 for curing concrete
Clear polyethylene lm available from 50.62.00000 1 mil to 20 mil thickness. ASTM E-96 for water vapor permeance ASTM C-156 for moisture retention ASTM E-154 for use as vapor retarders
Poly Burlap
Combination of 10 oz. burlap and 5 mil white opaque polyethylene. ASTM C-171 for curing concrete
154
www.atlasform.com
FLATWORK ACCESSORIES
SPEED DOWEL
SPEED DOWEL is a slip dowel installation system that: Minimizes differential settlement at construction joints. Allows unobstructed contraction and expansion of concrete slabs. Helps reduce cracking and spalling at construction joints. Reduces time required for form board removal between slabs. Speed Dowel
Product Code No. 40.45.30000
PRODUCTS
NON-SLIP FINISH
Emery Non-Slip Emery Non-Slip is a hard, non-slip aggregate comprised of 100% pure emery. Emery is a natural occurring mined material that is extremely hard, tough and abrasion resistant. Emery Non-Slip is completely non-corrosive and rust free, for inside and outside use.
www.atlasform.com
155
FLATWORK ACCESSORIES
Contractor Committed.
WATERSTOPS
Ribbed with Center Bulb
Ribbed with center bulb waterstops are employed in expansion joints where movement between members is anticipated. They are generally used above grade but in fact are a universal design and can be used in any type of joint above or below grade.
Flat Ribbed
Flat ribbed waterstops are employed in construction joints where movement between members is not anticipated. They are generally used below grade in footings, walls, slabs, or for breaks in concrete due to limitations in working methods.
40-BAR SUPPORTS
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
156
www.atlasform.com
FLATWORK ACCESSORIES
WATERSTOPS
Dumbbell
Dumbbell waterstops are used in construction joints where movement between members is not anticipated. They are usually employed below grade and in horizontal applications. Dumbell waterstops with a centerbulb are suitable for use where movement between members is anticipated.
Split Ribbed
Split ribbed waterstops are used in either construction or expansion joints where the elimination of split form work is feasible. The split leg of the waterstop is spread open and nailed to the bulk head. When the form work is removed following completion of rst pour, the split leg is joined together and the second pour completed.
20-FORMING ACCESSORIES 30-ATLAS TECH PRODUCTS 40-BAR SUPPORTS 50-FLATWORK ACCESSORIES 60-PRECAST & TILT-UP
70- FOUNDATION
PRODUCTS
Description Waterstop Vinylex R6-316 Waterstop Vinylex R6-38 Waterstop Vinylex R6-38T Waterstop Vinylex RB6-316 Waterstop Vinylex RB6-38 Waterstop Vinylex RB9-316
www.atlasform.com
157
FLATWORK ACCESSORIES
Contractor Committed.
WATERSTOPS
HENRY HYDRO-FLEX WATERSTOP
The Hydro-Flex waterstop is a preformed adhesive hydrophilic waterstop designed to swell in the presence of water providing a watertight seal in cold joints on concrete structures. This highly advanced product is made from butyl rubber, polypropylene elastomers, hydrophilic llers and plasticizers providing a more uniform and controlled volumetric expansion upon contact with water. Hydro-Flex Waterstop is self-adhesive and bonds to a wide variety of substrates. Its ability to swell, allows it to penetrate into poorly consolidated concrete surfaces.
Product Code No. 50.73.11000
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
70- FOUNDATION
PRODUCTS
158
www.atlasform.com
FLATWORK ACCESSORIES
Features
Fast & easy installation. Only an additional 10 minutes to typical concrete ramp placement. Pre-stressed with high tensile strength stainless steel tendons for impact and crack resistance. Truncated domes meet federal regulations. Thermal coefcient of expansion similar to concrete for maximum service life through temperature cycles. Helps prevent warping, oating, voids and tripping hazards. Excellent durability in extreme temperatures, direct sunlight, & freeze/ thaw exposure. No waiting for concrete to setup; begin to install as soon as ramp is poured. No extra weights or expensive adhesives needed to keep panels down. Can cut to t custom applications. Made in the USA!
Material Specications
Compressive stress resulting from prestress 220 PSI both directions Cast Stone compressive strength greater than 9000 psi average at 56 days ASTM C140-98b Constructed unit exural strength; modulus of rupture greater than 1200 psi ASTM C293-94 Absorption less then 5.3% ASTM C140 Abrasion resistance; Coefcient of loss .1cm3/cm2 ASTM C418-98 Freeze-Thaw resistance; less than 1% loss after 75 cycles, ASTM C1262d-98, 3% NaCL solution Mechanical anchor pull out strength greater than 900 lbs each Mechanical anchor push through strength greater than 1200 lbs each Slip resistance greater than .8, ASTM C1028-96 Product Description 2 x 2 Yellow Panels 2 x 2 Yellow Panels 2 x 3 Yellow Panels 2 x 2 Red Panels 2 x 2 Red Panels 2 x 3 Red Panels 2 x 2 Black Panels 2 x 2 Black Panels 2 x 3 Black Panels Product Code No. 50.20.11220 50.20.11225 50.20.11230 50.20.12220 50.20.12225 50.20.12230 50.20.16220 50.20.16225 50.20.16230
PRODUCTS
www.atlasform.com
159
Contractor Committed.
P-24
20-FORMING ACCESSORIES
P-25
P-30
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
P-31
70- FOUNDATION
PRODUCTS
SA 1835
160
www.atlasform.com
P-32
P-51
40-BAR SUPPORTS
P-50
PRODUCTS
www.atlasform.com
161
Contractor Committed.
P-52
20-FORMING ACCESSORIES
1 1 2 2 2 2
2 2 4 4 4 4 4
40-BAR SUPPORTS
4 4 4 8 8 8
50-FLATWORK ACCESSORIES
8 8 8 20 20
Contact Atlas Construction Supply for concrete strength requirements to develop Safe Working Loads. DOT certied SL Anchors are also available by special order. 60-PRECAST & TILT-UP
P-52-W
70- FOUNDATION
PRODUCTS
P-53
5 8 20
162
www.atlasform.com
P-54
0.2 Ea.
P-56
P-56-PL
P-56-R
70- FOUNDATION
PRODUCTS
www.atlasform.com
163
Contractor Committed.
P-57
20-FORMING ACCESSORIES
P-58
40-BAR SUPPORTS
P-59
50-FLATWORK ACCESSORIES
4 ton anchor
P-60
70- FOUNDATION
PRODUCTS
164
www.atlasform.com
P-61
P-62
Special Order
Safe Working Loads-Tons 1 2 4 8 20
P-63
40-BAR SUPPORTS 50-FLATWORK ACCESSORIES
For Wing Nut see P-64, Use with P-56 & P-56-R Recess Plug.
P-63-PL
P-63-R
70- FOUNDATION
PRODUCTS
Free NC Thread
Wt. Lbs. 0.15 Ea. 0.15 Ea. 0.15 Ea. 0.15 Ea.
www.atlasform.com
165
Contractor Committed.
P-64
20-FORMING ACCESSORIES
P-64-PL
P-65
40-BAR SUPPORTS
4 8 20
P-66
50-FLATWORK ACCESSORIES
Plate Size Width X Length .75 x 1.5 .75 x 1.6875 .822 x 1.6875 .822 x 2.375 .75 x 1.5 x 4 .75 x 1.6875 x 4 .822 x 1.6875 x 4 .822 x 2.375 x 4 .625 x 1.75 .875 x 2.5 1.375 x 3.25 1.75 x 3.75
70- FOUNDATION
2 4 8 1
PRODUCTS
P-67-PL P-67-PL
2 4 8 1 2 4 8
P-68-PL P-68-PL
166
www.atlasform.com
P-66-R
P-69-M P-56-MS
P-56-MS Screw for Swift Lift Plus Magnetic Setting Plate. 3/8- 16 NC x 3/4 Allen Head Screw.
Product Code No. Wt. Lbs. 0.03 Ea.
40-BAR SUPPORTS
P-74
50-FLATWORK ACCESSORIES
P-75 P-76
70- FOUNDATION
PRODUCTS
PANEL PADS
Dimensions 2-1/2 x 5-1/2 x 1/2 Product Code No. 60.25.81000 Pieces per box 400 Wt. Lbs. per box 40.0
P-78
www.atlasform.com
167
Contractor Committed.
P-80
SHIM STRIPS
Special Order
Item and Size 1/16 x 2 x 4 or 1/16 x 4 x 4 1/8 x2 x 4 or 1/8 x 4 x 4 1/4 x 2 4 or 1/4 x 4 x 4 1-16 x 3 x 3 1/8 x 3 x 3 Product Code No. Pieces per carton 2000 1000 2000 1000 1000 500 2000 2000 1000 Wt. Lbs. per carton 39.0 39.0 78.0 78.0 78.0 78.0 44.0 86.0 86.0
20-FORMING ACCESSORIES
1/4 x 3 x 3
Available in full cartons only. Other sizes available on request. Note: Each 2 x 4 or 4 x 4 sheet is scored every 2 of the 24 width; each 3 x 3 sheet is scored every 3 of the 24 width.
P-81
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
Available in full cartons only Note: 1-1/16 x 4 x 6 and 1-1/16 x 4 x 4 Shimpaks are made by shim thickness of one 1/16 thick, three 1/4 thick and two 1/8 thick, in that order. Shimpaks are held together with a resilient band to make removal or addition easy.
P-82
70- FOUNDATION
1/4 x 2 x 48
PRODUCTS
1/8 x 2 x 48
Available in full cartons only Note: Each carton of 48 contains 25 scored sheets, which offer 300 2 x 48 strips; Other thicknesses, lengths and scoring available on special order; non-skid bearing strips are not designed for stacking.
168
www.atlasform.com
P-83
Minimum order 100 pieces of each thickness and size. Other sizes available on special order. Note: Slot width 13/16.
P-84
Core Plugs are designed for manufacturers of prestressed hollow core planks. They are lightweight, easy to insert and effectively block off grout ow to ensure bearing through the ends of the planks onto the sill and foundation. The exclusive wall taper design of these plastic core plugs assures a tight interference t. Core Plugs are available for most sizes of spancrete, exicore, spiroll, dycore and dynaspan. Other shapes and sizes are available. Plug numbers refer to the diameter of the core holes and not to the thickness of the plank.
Special Order
Product
11.5 23.8
20.42.85302
PRODUCTS
www.atlasform.com
169
Contractor Committed.
20-FORMING ACCESSORIES
Special Order
Load Range 2-3 ton 4-5 ton 8-10 ton
40-BAR SUPPORTS
10 ton
50-FLATWORK ACCESSORIES
PRODUCTS
2 ton 4 ton
6 ton 8 ton
170
www.atlasform.com
40-BAR SUPPORTS
P-92-S P-92-SP
50-FLATWORK ACCESSORIES
898 940
PRODUCTS
P-93
www.atlasform.com
171
Contractor Committed.
P-94
20-FORMING ACCESSORIES
40-BAR SUPPORTS
50-FLATWORK ACCESSORIES
P-95-F
3 ton
8 ton
P-95-P
70- FOUNDATION
PRODUCTS
8 ton
172
www.atlasform.com
P-96
P-97-DT
Note Anchor Length Required: 4 ton: Tee Depth Minus 1.50. 8 ton: Tee Depth Minus 1.75.
P-97-DT Shear Bar
40-BAR SUPPORTS
P-98-S
50-FLATWORK ACCESSORIES
P-98-T
70- FOUNDATION
PRODUCTS
www.atlasform.com
173
Contractor Committed.
P-99 P-99-N
Special Order
Type P-99-N Product Description Narrow Recess Plastic Recess Plastic Recess Plastic Recess Load Range 1 ton 2-3 ton 4-6 ton 8-10 ton Length 4 4 5-1/4 7-1/2 Product Code No. Pieces per box 50 50 50 25 Wt. Lbs. per 100 23.0 22.0 60.0 155.0
20-FORMING ACCESSORIES
P-99
P-99 P-99
P-99-C
Special Order
30-ATLAS TECH PRODUCTS
Type P-99-C P-99-C P-99-C Product Description Cast Recess Cast Recess Cast Recess Load Range 2 ton 4-6 ton 8 ton Length 4 5-1/4 7-1/2 Product Code No. Pieces per box 50 50 10 Wt. Lbs. per 100 72.0 122.0 350.0
P-100
40-BAR SUPPORTS
P-100 P-100
50-FLATWORK ACCESSORIES
P-100
P-101
P-101
P-102
70- FOUNDATION
PRODUCTS
P-102 Wedge
P-102 P-102
P-103
P-103 Foam
174
www.atlasform.com
WITH PLASTIC TIPPED LEGS OR STAINLESS STEEL TIPS See F-53 Thin Slab Insert for 3/4 Dia. Pickup Inserts
Wt. Lbs. per 100 131.0 133.0 135.0
T-1
192.0 193.0 195.0 196.0 198.0 207.0 209.0 210.0 211.0 213.0 215.0
40-BAR SUPPORTS
T-2
312.0 316.0
1-1/4 Double Pickup Insert 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 7 7 8 8 8 8 9 10 12 60.22.62070 60.22.60277 60.22.60280
70- FOUNDATION
60.22.60287
PRODUCTS
1-1/2 Double Pickup Insert 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 Up to 5-1/2 6 6-1/2 7 7-1/2 8 60.22.61055 60.22.61060 461.0 465.0 469.0 473.0 477.0 481.0
www.atlasform.com
175
Contractor Committed.
T-3
20-FORMING ACCESSORIES
1 1-1/4
T-3-A
40-BAR SUPPORTS
T-4
70- FOUNDATION
PRODUCTS
50-FLATWORK ACCESSORIES
176
www.atlasform.com
T-5-A
BRACE ANCHOR
Dia. 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 Slab Thickness 4 5 5-1/2 6 6-1/2 7 7-1/4 7-1/2 8 8-1/4 8-1/2 8-3/4 9 9-1/4 9-1/2 10 10-1/2 11 11-1/4 11-1/2 12 15 16 Product Code No. 60.22.25040 60.22.25050 60.22.25055 60.22.25060 60.22.25065 60.22.25070 60.22.25072 60.22.25075 60.22.25080 60.22.25082 60.22.25085 60.22.25088 60.22.25090
T-6-A
LIFTING ANGLE
For Edge Lifting Plate see T-27.
Length 21 18 Bolt Size 1-1/4 & 1-1/2 1 Product Code No. 60.20.41008 Wt. Lbs. 53.0 Ea. 45.0 Ea.
T-8
70- FOUNDATION
PRODUCTS
www.atlasform.com
177
Contractor Committed.
T-10
20-FORMING ACCESSORIES
1 1 1
T-11
40-BAR SUPPORTS
T-12
50-FLATWORK ACCESSORIES
T-13
60-PRECAST & TILT-UP
COIL-ANCHORTM
U.S. Patent No. 5,006,023
Dia. T-13 Coil-Anchor Set T-13 Coil-Anchor 3/4 3/4 3/4 Length 4-1/2 6 Product Code No. 60.25.15150 60.25.15060 60.25.15000 Wt. Lbs. 0.8 Ea. 1.0 Ea. 4.0 per 100 Packaging 20 sets per carton 20 sets per carton 100 per bag
70- FOUNDATION
Extra tangs
PRODUCTS
T-13-L
178
www.atlasform.com
T-14 T-15
75.0 Ea. 107.0 Ea. 130.0 Ea. 172.0 Ea. 193.0 Ea. 505.0 Ea. 245.0 Ea. 382.0 Ea. 410.0 Ea. 668.0 Ea. 855.0 Ea.
Type T-15 T-15 T-15 T-15-C T-20 T-20-C Extension Pipe for B-2 Brace Extension Pipe for B-8 Brace Extension Pipe for B-8 Brace Coupler for B-8 Brace Extension for B-12 Brace Coupler for B-12 Brace
40-BAR SUPPORTS
42.0 Ea. 63.0 Ea. 21.0 Ea. 100.0 Ea. 65.0 Ea.
50-FLATWORK ACCESSORIES
T-19
PRODUCTS
www.atlasform.com
179
Contractor Committed.
T-21
20-FORMING ACCESSORIES
1-1/4 1-1/2
Available in full cartons only, sold in sets only. Note: Not recommended for contractors (except in emergency) to put in inserts in eld Buy inserts with Locator Plug installed
T-26
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
1 Bushing
T-27
70- FOUNDATION
PRODUCTS
180
www.atlasform.com
T-41 T-41-S
20 20 20
10 10 10 10 10
50-FLATWORK ACCESSORIES
Requires a minimum concrete compressive strength of 2,500 psi. Ground Release II Inserts are shipped assembled (ready to use). Each Insert is sized 1/8 less than the panel thickness above. When ordering, specify overall panel thickness including structural thickness and aggregate or form liner thickness. Available in other sizes upon request.
T-43-R
70- FOUNDATION
PRODUCTS
www.atlasform.com
181
Contractor Committed.
T-45
20-FORMING ACCESSORIES
3/4 Brace anchor cap for use with T-6-A Product Code No. Wt. Lbs. 0.5 per bag Packaging 20 per bag
T-46
40-BAR SUPPORTS
T-49
50-FLATWORK ACCESSORIES
70- FOUNDATION
11
PRODUCTS
11-1/2 12
T-49-E
182
www.atlasform.com
T-50
T-51
20-FORMING ACCESSORIES
T-52
Gyro Tilt Inserts are shipped assembled (ready-to-use). Each insert is sized 1/8 less than panel thickness above. Requires a minimum concrete compressive strength of 2,500 psi. When ordering, specify overall panel thickness including structural thickness and aggregate or form liner thickness.
T-53
T-58
70- FOUNDATION
30.0
PRODUCTS
PLASTIC KEYWAY
EXTRUDED IN 10 FT. LENGTHS Special Order
Product Code No. Wt. Lbs. 20.0
T-59
www.atlasform.com
183
Contractor Committed.
T-61
20-FORMING ACCESSORIES
1 x 6 1 x 7 1 x 9 1 x 12
T-62
40-BAR SUPPORTS
T-63 T-63-S
50-FLATWORK ACCESSORIES
T-66
TILT BRACKET
Type and Size 5 Bracket 7 Bracket T-66 Tilt Bracket Shoe (single use) Product Code No. 60.25.66005 60.25.66007 60.25.66000 Wt. Lbs. / Ea. 0.19 0.22 0.18
T-68
70- FOUNDATION
PRODUCTS
T-75
184
www.atlasform.com
T-81
Ground Release II Inserts are shipped assembled (ready-to-use). Each insert is sized 1/8 less than panel thickness above. Requires a minimum concrete compressive strength of 2,500 psi. When ordering, specify overall panel thickness including structural thickness and aggregate or form liner thickness.
T-83
40-BAR SUPPORTS
T-110
70- FOUNDATION
60.21.10900 60.21.10925 60.21.10950 60.21.11000 60.21.11025 60.21.11050 60.21.11100 60.21.11125 60.21.11150 60.21.11200
PRODUCTS
2.480
2.710
2.240
www.atlasform.com
185
FOUNDATION PRODUCTS
Contractor Committed.
VOID FORMS
SonoVoid Beam Sonovoid Slab
Standard Sizes: 4, 6, 8, 10, 12 thick. Custom sizes and strengths available upon request. Standard Strength: Approximately 1000 PSF ultimate capacity. Approved for oors up to maximum 24 thick. Extra Strength: Approximately 1500 PSF ultimate capacity. Approved for oors up to maximum 36 thick. Super Strength: Approximately 2000 PSF ultimate capacity. Approved for oors up to maximum 48 thick.
20-FORMING ACCESSORIES
Standard Sizes: width: 6, 8, 9, 10, 12, 14, 16, 18 and 24. height: 4, 6, 8, 10 and 12. Custom sizes available upon request. Standard Strength: Approximately 1600-3000* PSF ultimate capacity. Approved for maximum Beam/Wall height of 10 feet Extra Strength: Approximately 2000-4500* PSF ultimate capacity. Approved for maximum Beam/Wall height of 16 feet * Ultimate capacity depends on product size.
SlabVoid is a corrugated paper product that helps eliminate severe damage by creating a space between the
structural concrete slab and underlying expansive soils. The SureVoid material, lying under structural concrete construction, absorbs ground moisture and loses strength only after the concrete has set, creating space into which soil can expand without causing damage. SlabVoid is designed to withstand the working load of the concrete construction process, then deteriorate with the absorption of moisture. Benets of SlabVoid Products Lightweight and easy to install. Available either factory assembled or knock-down (K.D.) for lower shipping and storage costs. Easily cut to shorter lengths for proper t. Available in standard strengths and sizes, or can be custom manufactured to accommodate design and load specications. Can be used to displace concrete volume where reduction in weight or cost is a consideration.
WallVoid System products provide temporary support systems for liquid concrete until the concrete sets and
PRODUCTS
can support itself. They are ideal for concrete components that span across drilled piers, pads, intermittent footings, as well as other concrete work. The WallVoid material, lying under structural concrete construction, absorbs ground moisture and loses strength only after the concrete has set, creating space into which soil can expand without causing damage. Benets of WallVoid Products Lightweight and easy to install. Available either factory assembled or knock-down (KD) for lower shipping and storage costs. Easily cut to shorter lengths for proper t. Available in standard strengths and sizes, or can be custom manufactured to accommodate design and load specications. Placed end-to-end between drilled piers or spread footings. End caps and seam pads available to prevent concrete from owing into void.
186
www.atlasform.com
FOUNDATION PRODUCTS
WINDOW SYSTEMS
The Boman Kemp Easy-Buck and Easy-Well Basement Window System is now ICC approved. The Boman Kemp system is the ONLY one in the industry to to be ICC approved and to receive an ESR number!
Easy Well
The Boman Kemp Easy-Well (or basement window well) is used to keep earth away from basement windows. It is designed to bolt directly to the Boman Kemp Easy-Buck or can be bolted to the wall during basement remodeling.
Safety Grate
The safety grate is made of rolled angle iron steel and steel safety bars. It is designed to keep people and pets out of the Easy-Well and hold the weight of standard foot trafc.
40-BAR SUPPORTS
Escape Ladder
50-FLATWORK ACCESSORIES
The safety ladder is designed to assist people in an emergency escape or egress. The safety ladder hangs in the back of the Easy-Well and is required in area wells that are deeper than 44 per IRC 2003.
Windows
The Boman Kemp double insulated vinyl window comes equipped with a sliding sash, screen, and is lockable from the inside. It is available in white and almond color and is also can be ordered in both Low E and tempered glass.
CUSTOM FABRICATION
Atlas provides custom fabrication of steel beams and posts for residential basements as part of our product package for customers. Atlas offers standard sizes or can accommodate nearly any size for residential projects. Please contact your Atlas representative for further details.
70- FOUNDATION
PRODUCTS
www.atlasform.com
187
Contractor Committed.
POWER SPRAYER
REAL PUMPTM Power Spraying System
Designed to spray: Form Oils & Other Release Agents : Concrete Sealers : Curing Compounds (Including White Wax Cures, High Viscosity & High Solids Products) : Stains Herbicides : Deck Sealers & Cleaners : Acids (special wand required) : Bleach Solutions : Fertilizers : Pesticides : Cleaners And Many Other Products
All Steel Construction for Durability Large Rubber Feet for Stability Comes Fully Assembled Multiple Power Options Available Including 115VAC includes standard 9 power cord 230VAC includes standard 9 power cord 12VDC includes standard 25 power cord w/ battery clamps Complete spray Control Kit Includes 1-spray Control Gun with comfort grip handle and quick connect, open flow fittings 1-18 Straight Brass Wand Section 1-18 Curved Brass Wand Section 1-Adjustable Brass Fan Nozzle 100 Safety Yellow 3/8 Chemical Resistant Hose with quick connect open flow fittings Chemical Resistant Diaphragm and Seals in Pump and Reel Utilizes a circuit breaker instead of fuses, protecting the operator and eliminating the need to search for fuses. Pressure sensitive switch shuts off pump when you stop spraying, to prevent bursting hoses and product separation or damage. This feature can be by-passed with our pressure activated re-circulator to continuously re-circulate and mix the product you are spraying. Reduces Labor Costs Portable, Easy to Use and Versatile Reduces Material Cost Easy to Clean Reliable
50-FLATWORK ACCESSORIES
40-BAR SUPPORTS
20-FORMING ACCESSORIES
PRODUCTS
188
www.atlasform.com
CONSTRUCTION EQUIPMENT
HAND PUMP SPRAYERS
This open-head construction chemical sprayer is a top selling model and is unmatched for quality.
Use to spray-apply Atlas Tech form releases, curing compounds, sealers and bondbreakers. 3.0 gallon solid brass pump barrel, shut-off, 18 extension, and 1/2 gallon per minute brass fan tip nozzle. 4.5 open head tank for easy lling and cleaning. TRI-POXY coated steel makes tank corrosion resistant and easy to clean. Lightweight for easy use. Comes with a comfortable carrying strap.
CAPACITY 3.0 G / 11.3L TANK TRI POXY HOSE 42 / 1.06m PUMP 12/ 300 mm Brass EXTENSION 18 / 455 mm Brass STRAP Yes SHIP UNIT/ WGT 1-10.16 lbs 4.60 kg PRODUCT CODE NO. 80.20.10035
SPRAY NOZZLES
40-BAR SUPPORTS
Atlas offers a wide array of spray nozzles to help contractors get the most out of each Atlas Tech Product. Most standard construction sprayers come with 0.5 gallon per minute fan spray tip, usually identied as a #8005 tip. This number identies two characteristics of the tip: 1) #8005 - the degree angle of the tip (80 degrees) 2) #8005 - the ow rate (0.5 gallon/minute) Type Product Code No.
#8002- bondbreakers #8003 - bondbreakers, low viscosity cures #8005 - cures, sealers, bonding agents #11010 - thick cures, bonding agents Fog Tip - form release agents 80.20.22102 80.22.22103 80.22.22105 80.22.22110 80.22.22000
50-FLATWORK ACCESSORIES
ELEPHANT TRUNKS
Makes difcult wall pours easy. Made from durable polyvinyl chloride it is strong, lightweight, and ribbed for greater strength. It is easily afxed to concrete hoppers by the use of band steel and hand tools.
Diameter 6 8 12
70- FOUNDATION
PRODUCTS
Camlever concrete buckets feature high strength, light weight tubular construction. Accessories sold separately include chutes, top ring extensions, bucket boots, boot extensions, etc. Please contact Atlas Construction Supply for further information.
Multiquip offers a diverse construction equipment product line including concrete placement, concrete nishing, soil compaction, dewatering pumps and more. Contact Atlas Construction Supply for further information.
Vibratory Screeds Concrete Pumps Mortar Mixers Power Trowels Rebar Cutters & Benders Generators & More!
www.atlasform.com
189
Contractor Committed.
GROUT PUMP
ChemGrout CG-502
The ChemGrout Sprayer/Finisher Series is specially designed to offer the exibility for both pump and spray applications. Its twin 45-gallon mixing tanks, pump and large holding hopper are all mounted on a single skid for quick, easy set-up and immediate operation. The low prole mix tanks enable greater ease when dispensing bags of dry material, reducing operator fatigue and increasing productivity. The tanks feature high-efciency paddles that provide a rapid mixing cycle and ensure a smooth, consistent material mix. Each mix tank alternates feeding a centrally located holding hopper allowing for a continuous, non-stop process. Complete with wheels, and only 31 inches wide, the CG-502 offers the mobility required to move quickly and easily through standard size doorways. The rugged steel frame stands up to the toughest jobsite conditions. Operator controls are centrally located for efcient production. All components are easily accessible for operating, cleaning and maintenance. The ChemGrout 2C4 pumps allows for a steady and continuous ow of material, ideal for self-leveling underlayments, ne non-shrink grouts and most other spray and injection applications. A hinged clean-out port has been added to suction housing for quick access and clean up.
40-BAR SUPPORTS
20-FORMING ACCESSORIES
CG502 / 2C4 Skid Power Max Output Pressure Required Weight Size
Electric Hydraulic 8 gpm (30 lpm), 174 psi (12 bar) 1 phase 1000 lbs 82 L x 31 W x 55 H
50-FLATWORK ACCESSORIES
Atlas Rents the ChemGrout CG-502 pump for self-leveling underlayment and ne grouting needs. Call an Atlas Representative for details.
70- FOUNDATION
PRODUCTS
190
www.atlasform.com
CONCRETE VIBRATORS
MOTORS Model VME1500 VME2500 VME3000 Weight 12 lbs. 15.5 lbs. 19 lbs. CORES Model Length 3 5 VBC7 VBC10 VBC14 VBC21 7 10 14 21 HEADS Size 1-1/16 Steel 1-5/16 Steel 1-9/16 Steel 1-3/4 Steel 2-1/8 Steel 2-1/2 Steel Model VBH1116 VBH1516 VBH1916 VBH134 VBH218 VBH212 Radius of Effect 4-5 5-7 10-13 15-17 17-21 21-24 80.15.14340 80.15.14350 80.15.14360 Product Code No. 80.15.14310 Product Code No. 80.15.12010 80.15.12020 80.15.12030 80.15.12040 80.15.12050 80.15.12060 VBCS7 VBCS10 VBCS14 VBCS21 Model HP 1.5 2.5 3.0 Volts 115 AC/DC 115 AC/DC 115 AC/DC Amps 11 13 19 Max Head Size 1-3/4 2-1/2 2-1/2 CASINGS Length 3 5 7 10 14 21 Product Code No. 80.15.13010 80.15.13020 80.15.13030 80.15.13040 80.15.13050 80.15.13060 Product Code No. 80.15.11110 80.15.11120 80.15.11130
INTERCHANGABLE RUBBER TIPS Size 1-1/16 1-5/16 1-9/16 1-3/4 2-1/8 2-1/2 Model VBRT1116 VBRT1516 VBRT1916 VBRT134 VBRT218 VBRT212 Product Code No. 80.15.14110 80.15.14120 80.15.14130 80.15.14140 80.15.14150 80.15.14160
70- FOUNDATION
PRODUCTS
www.atlasform.com
191
Contractor Committed.
CONCRETE TOOLS
LIGHTWEIGHT MAGNESIUM SCREEDS
Description Product Code No. 80.40.11060 80.40.11080 80.40.11100 80.40.11120 80.40.11140 80.40.11160 80.40.11200 Screed Mag 6 Screed Mag 8 X 1-1/2 X 3-1/2 Screed Mag 10 X 1-1/2 X 3-1/2 Screed Mag 12 X 1-1/2 X 3-1/2 Screed Mag 14 X 1-1/2 X 3-1/2 Screed Mag 16 X 1-1/2 X 3-1/2
20-FORMING ACCESSORIES
Screed Mag 20
ROUND FRESNO
Description 5 x 36 5 x 48 Product Code No. 80.40.27130 80.40.27145
40-BAR SUPPORTS
SQUARE FRESNO
Description 5 x 24 5 x 36 Product Code No. 80.40.27115 80.40.27125 80.40.27150
50-FLATWORK ACCESSORIES
5 x 48
POOL TROWELS
Description Product Code No. 80.40.42430 80.40.41753 5 x 14 5 x 20
CONCRETE TROWELS
Description Product Code No. 80.40.41330 80.40.41530 80.40.41630 12 x 4 16 x 4 18 x 4
70- FOUNDATION
PRODUCTS
192
www.atlasform.com
CONCRETE TOOLS
CONCRETE TAMPERS
Description 36 48 Product Code No. 80.40.13010 80.40.13020
20-FORMING ACCESSORIES
DIRT/STAMP TAMPERS
Description 10 x 10 12 x12 16 x 16 Product Code No. 35.50.95010 35.50.95020 35.50.95030
FLOOR SCRAPERS
Description 5 x 14 5 x 18 5 x 22 Product Code No. 80.48.31300
40-BAR SUPPORTS
80.48.31400 80.48.31500
OVERLAY SQUEEGEES
50-FLATWORK ACCESSORIES
Description 24 Neoprene 30 Serated Edge 36 Neoprene Handle 6 Standard 6 Standard 6 Standard Product Code No. 80.48.11024 80.48.11030 80.48.11036
70- FOUNDATION
PRODUCTS
TAPE
Description Duct Tape Duct Tape Red Packaging Tape Product Code No. 80.75.12100 80.7512120 80.75.13200
www.atlasform.com
193
Contractor Committed.
40-BAR SUPPORTS
A-100 Bracket.....................................................25 A-Clamp..............................................................21 A-Deck...........................................................11-14 ACS Wallform................................................26-27 ADA Detectable Warning Panels......................159 Abrasive Blades & Blocks.....................................2 Adhesive Spray.................................................184 Adjustable Coil Bolt .........................................61 Adjustable Kicker..............................................143 Adjustable Weld Angle Bracket ........................71 Aggregates............................................................2 Alisply..................................................................28 AL-SPEED Shoring Frame..........................8 - 10 Aluminum Beam......................................8 - 10, 21 Aluminum Grits (non-slip).................................155 Aluminum Strongbacks.......................................21 Aluminum Wall Forms.............................20-25, 30 Anchor Bolts.......................................................67 Anchor Bolt Sleeves .........................................67 Anchoring Epoxy........................................105,126 Angle Bracket................................................21,23 Area Wells........................................................187 Arcis Detectable Warning Panels.....................159 Atlas Tech Products.....................................86-125 Backer Rod...........................................................2 Bag Ties............................................................134 Bar Chairs/ Supports.................................130-133 Bar, Stripping.......................................................49 Barlock Couplers...............................................137 Barrier Dowel Aligner .......................................139 Barrier Fencing.....................................................2 Base Tie ..........................................................50 Basket Clip........................................................140 Basket, Dowel...................................................138 Batter Washer................................................65,71 Beam Bolster.....................................................131 Beam Clip ..........................................................85 Beam Form Systems.....................................18-19 Bearing Pads........................................................2 Bearing Plate......................................................45 Bentonite Waterstop.........................................158 Better Bar............................................................49 Blankets, Curing................................................154 Blind Side Walls.............................................30,44 Bolsters.....................................................130-131 Bolts...............................................................67,71 Bolt Clamp..........................................................67 Bondbreakers................................................96-97 Bonding Agents.........................................100-107 Bottom Jacks........................................................9 Box Culvert Form System...................................31 Box Voids..........................................................186 Brace Anchor....................................................177 Brace Anchor for Fill .......................................176 Braces, Tilt-Up..................................................179 Breakback Wrench .........................................49 Bridge Deck Repair Products....................108-110 Bridge Overhang Bracket..............................38-39 Bulkhead Bracket...........................................21,23 Bulkhead Form...................................................44 Bulloats...........................................................192 Burlap...............................................................154 Burlene.............................................................154 Cap Plug ..........................................................78 Capitol Forms.....................................................33
Castellated Steel Beams....................................17 Catwalk Bracket.......................................21, 38-39 Cement...................................................................2 Cementitious Repair Products....................113-123 Ceramar Expansion Joint..................................145 Chamfer Strips....................................................41 Chemical and Cement Products .................86-129 Clamp Wallform System.................................26-28 Cleaning Agent (for concrete)..............................98 Closed Coupler....................................................73 Coil Anchor/Tang...............................................178 Coil Bolts ...........................................................60 Coil Inserts.....................................................58-62 Coil Loop Insert Straight.................................61-62 Coil Nut Washer...................................................63 Coil Nuts ...........................................................59 Coil Rod ...........................................................59 Coil Ties ...........................................................57 Colored Concrete Systems........................128-129 Color Hardener...................................124-125, 128 Column Clamps..............................................32,35 Column Forms................................................32-35 Column Mounted Table Forms............................17 Column Mounted Jacks.......................................38 Composite Form Panel........................................27 Concrete Buckets..............................................189 Concrete Cleaner.................................................98 Concrete Plugs....................................................53 Concrete Pumps................................................189 Concrete Restoration.................................102-123 Concrete Saws......................................................2 Concrete Stamps............................42-43, 128-129 Concrete Toppings.......................116-117, 128-129 Cone Removal Wrench.......................................50 Construction Spray Adhesive............................184 Corewall Slotted Inserts.............................160-161 Cork Expansion Joint ........................................145 Corrosion Inhibitors.......................................2, 104 Corrugated Wall Tie ..........................................77 Couplers.............................................134-135, 137 Crack Repair...............................................102-108 Crossbraces.....................................................9-10 Curb Forms........................................................143 Cure Lap............................................................154 Cure & Seal Compounds................................89-94 Curing Blankets.................................................154 Curing Compounds................................89-93, 127 Cushion-Lock Reglet...........................................84 Cut Washer........................................................148
Dovetail Anchor Slot ..........................................77 Dovetail Anchors..................................................77 Dowel Bar Splicer(DB-SAE)..............................135 Dowel Baskets...................................................138 Dowel Caps................................................139-140 Dowel-In (D-l).....................................................135 Dowels.........................................................139,155 D/R Shebolt..........................................................72 D/R Taper Tie.......................................................69 D/R Threadbar......................................................59 Drainage Channels.....................................150-152 Drip Strips............................................................41 Drophead Shoring System..............................11-14 DSI Rod...............................................................45 Drop-In Anchors................................................2,64 Ductile Embed (SAE) ..........................................81 Dustproofer / Sealer / Hardener...........................95 Dynamic Leg Shoring System..............................15 Edge Form.........................................................143 Edge Form Brace...............................................143 Edge Lifting Plate...............................................180 Edge Pick-Up Insert, Double..............................176 Edge Pickup Insert, Single.................................176 Edgers (hand)....................................................192 Elephant Trunks.................................................189 End Pick-Up Insert, Double...............................178 End PIck-Up Insert, Single................................178 Epoxies...............................................102-109, 126 Epoxy Coatings..................................................127 Epoxy Grout.......................................................126 Epoxy Injection...................................102-105, 126 Epoxy Mortar.....................................................116 Epoxy Retention Ring........................................140 Erection Anchors...............................................171 Erosion Control Products.......................................2 Evaporation Retarder...........................................91 Expanded Coil Insert ..........................................81 Expanded Metal..................................................44 Expanded Polystyrene.......................................149 Expansion Joint Fillers.......................................145 Eye Anchors.......................................................162 Eye Bolt ............................................................79 Eye Nut ............................................................79 E-Z Chair............................................................132 Fasteners...............................................................2 Fencing, Silt & Barrier............................................2 Ferrule Instead of a Coil......................................84 Ferrule Loop Insert (Straight)..............................82 Fiberglass Column Forms...................................33 Fiberglass Rod....................................................74 Fiber Expansion Joint........................................145 Fibre Forms.........................................................34 Finish Machines.................................................189 Finishing Aid........................................................91 Fitting-Up Bolts and Nuts.....................................71 Flared Thin Slab Insert (Coil) .........................82 Flared Thin Slab Insert (Ferrule) .........................82 Flat Foot Anchors..............................................172 Flat Tie ................................................................48 Flat Washer....................................................45, 58 Fleet Lift System.........................................170-174 Flex Form System................................................29 Floats.................................................................192 Floor Coatings...................................................127 Floor Cover........................................................154 Floor Hardeners..................................124-125, 127
70- FOUNDATION
50-FLATWORK ACCESSORIES
20-FORMING ACCESSORIES
DBR Coupler......................................................134 DBR Setting Splice Bars....................................134 Deck Forms......................................................8-19 Decorative Concrete Systems..................128-129 Delta Tie Sandwich Panel..................................160 Diamond Blades....................................................2 Dobies................................................................133 DOT Curing Compounds........................90-91, 127 DOT Patch..........................................110, 115-116 Double Chamfer Strip........................................183 Double Flared Coil Loop Insert .........................62 Double Flared Criss Cross Coil Loop Insert........64 Double Flared Loop Insert...................................79 Double Pickup Inserts........................................175 Double Swivel Lifting Plate................................180 Double Tee Specialty Anchor.............................173
PRODUCTS
194
www.atlasform.com
Floor Scrapers...................................................193 Floor Underlayments..........................118-119, 127 Flying Deck Forms...................................14, 16-17 Foam (for use with Recess Member)................174 Footing Ties..........................................................2 Form Board.......................................................143 Form Clamp........................................................70 Form Panels..................................................31, 40 Form Patch and Magnetic Setting Tool...............85 Form Release Agents....................................87-88 Form Spacers...................................................132 Form Spreaders..................................................49 Form Systems................................................8 - 35 Form Tie System......................................21, 23,45 Formliners......................................................42-43 Frame Connector...................................................9 Fresnos.............................................................192 Ganged Aluminum Wall Forms...........20-25, 29-30 Garage Beam Forms.....................................18-19 Generators........................................................189 Geosynthetics/Geotextiles....................................2 Grafti Remover....................................................2 Grates for Trench Drain.............................150-152 Ground Release II Insert...................................181 Ground Release II Insert (HD)..........................185 Ground Release II Lifting Hardware..................181 Ground Release II Lifting Hardware (HD).........185 Ground Release II Patch Caps.........................182 Ground Release II Spreader Beam...................182 Grouts.................................................111-112, 127 Grout Pumps..............................................118,190 Grout Retention Ring........................................140 Guard Rail Post...................................................37 Gyro Tilt Plus Edge Lift Insert............................182 Gyro Tilt Plus Face Lift Insert............................182 Gyro Tilt Plus Insert (HD).................................183 Gyro Tilt Plus Hardware....................................183 Gyro Tilt Plus Hardware (HD)...........................183 Handle Coil Nut...................................................64 Handset Deck Forms.......................................8-13 Hardener (Dry-Shake).......................124-125, 127 Hardener (Liquid).........................................95,127 HDO Plywood......................................................40 He-Bolt................................................................73 Header Forms...................................................143 Header Form Support...............................143, 147 Heavy Coil Hex Nuts...........................................63 Hex Coupling Nut................................................68 High Chairs................................................130-132 Holding Plate.....................................................174 Holding Rod......................................................174 HookTie.........................................................44, 47 Injection Resins.................................102-105, 126 Insert Locator Plug............................................180 InsertionTool........................................................54 Inside Tie Rod.....................................................66 Integral Color.............................................128-129 Intersectional Chairs..................................130-132 Inverted Brace Achor........................................177 Jahn A Bracket.................................................55 Jahn C Bracket.................................................55 Jahn Cornerlock..................................................55 Jahn Eccentric.....................................................56 Jahn Rivet...........................................................56
Jahn Scaffold Jack..............................................56 Jahn Tie Extender................................................55 Joint Caps.........................................................146 Joint Forming System........................................155 Joint Repair Products.................106-110, 126-127 Joint Sealants............................106-107, 126-127 Joists (Flying Deck Form)...................................16 Jumbo Shore.......................................................36 Jump Form Systems......................................24-25 Jump Shoe..........................................................25 Keyway...............................................................183 Korolath Bearing Strips.....................................168 Korolath Core Plugs..........................................169 Korolath Heavy Duty Shimpaks........................168 Korolath Horseshoe Spacer Strips....................169 Korolath Shim Strips.........................................168 L Anchor..........................................................171 L Leg Inserts.....................................................80 Laminated Veneer Lumber (LVL)........................40 Lead Plugs..........................................................45 Lift Plate (Drilled)...............................................184 Lifting Anchors...................................................162 Lifting Angle.......................................................177 Lifting Eyes........................................................161 Lifting Lug...........................................................21 Lined Tube.....................................................33-34 Liquid Bonding Agents...............................100-101 Load Key...........................................................147 Load Transfer Joint System..............................155 Loop Ferrule Insert..............................................78 Loop Strongback Tie...........................................55 LoopTies..............................................................51 LVL Beams.................................................8-13, 40 Magna Jaw..........................................................73 Median Barrier Forms...........................................2 Mesh Supports...........................................130-133 Methacrylate......................................................110 Mike Bracket........................................................44 Mixers........................................................189-190 Modular Form Systems............................26-28, 31 Moisture Barrier..........................................153-154 Moisture Retaining Cover..................................154 Nails..................................................................193 Non-Shrink Grouts......................................111-112 Non-Slip Finish..................................................155 Nut Washer (Acme).............................................68 Omni Wedge.......................................................47 On-Site Pipe Bace.............................................179 One-Sided Wall Forms...................................30,44 OSHA Regulations.............................................4-5 Overhang Bracket..........................................38-39 Overlays (Decorative)................................128-129 Overlays (Structural)....................109-110, 114-117 Panel Pads........................................................167 Paper Tubing.....................................................148 Parking Structure Form Systems...................18-19 Patching Products......................................113-126 Pencil Rod...........................................................69 Pipe Brace.........................................................179 Pipe Turning Device..........................................167 Plastic Cap for Expansion Joint........................146 Plastic Cones for Coil Ties..................................63
Plastic Cones for Snap Ties...............................46 Plastic Cones for Taper Ties...............................45 Plastic Cone Removal Wrench...........................61 Plastic Keyway..................................................183 Plastic Plug.........................................................85 Plastic Rebar Guards.......................................140 Plastic Setback Plug...........................................65 Plastic Setting Bolt............................................160 Plastic Sleeves (for ties).....................................45 Plastic Zip Strip Joint Former............................146 Plate Anchor.....................................................172 Plate Washer..................................................45,58 Plugs, Tie Hole..............................................45,53 PlyLag................................................................63 Plywood Form Panels.........................................40 Polydrain...................................................150-152 Polyester Concrete Overlays............................110 Polyethylene Film.............................................154 Polymer Concrete.......................109-110, 114,116 Polystyrene.......................................................149 Polyureas..........................................................127 Polyurethane Sealants......................................107 Portland Cement...................................................2 Post Shore..........................................................36 Post Shore Clamp (4x4).....................................56 Post-Tensioned Slab Products.........................130 Power Sprayers................................................188 Power Trowels..................................................189 Precast Accessories..................................160-174 Precast Trench Drain................................150-152 Protective Rebar Covers..................................140 Pumps................................................118,189-190 PVC Sheeting.......................................................2 PVC Sleeve........................................................45 PVC Waterstop..........................................156-157 Quantum-Cure....................................................89 Quick Release Strongback Bolt........................184 Quick Release Strongback Insert.....................184 Radius Formers..................................................41 Radius Wall Forms........................................28-29 Rail Fastener Embed (RT-SAE).........................81 Rebar................................................................141 Rebar Clip and Form Spreader...........................71 Rebar Couplers........................................135, 137 Rebar Cutters & Benders.................................189 Rebar Guards, Plastic......................................140 Rebar Supports.........................................130-133 Recess Members..............................................174 Recess Plugs (Fleet Lift)..................................174 Recess Plugs (Swift Lift)...........................163-164 Reinforcing Bar for Swift Lift Anchors...............164 Removable Plastic Cap Strips..........................146 Repair Mortars...........................................113-122 Reshore Products...................................36, 38, 56 Retarders............................................................99 Ring Clutches...................................................170 Riser Frames....................................................148 Rock Anchor (Coil Thread).................................64 Rocket/Kohler Ferrule Insert...............................80 Rod Clamp..........................................................69 Rod Clamp (Superior).........................................70 Rollerback Carriage............................................25 Round Column Forms...................................33-34 Round Stakes...................................................144
20-FORMING ACCESSORIES 30-ATLAS TECH PRODUCTS 40-BAR SUPPORTS 50-FLATWORK ACCESSORIES 60-PRECAST & TILT-UP
70- FOUNDATION
PRODUCTS
www.atlasform.com
195
Contractor Committed.
Safety Notes......................................................6-7 Safety Rail Post..................................................37 Sand.....................................................................2 Sand Plate........................................................132 Sandwich Panel Erection Anchor......................171 Scaffold Bracket (Jack).................................38, 56 Scissor Clamps...................................................35 Screed Bracket..................................................146 Screed Key........................................................147 Screed Pad.......................................................146 Screed Post......................................................146 Screeds (Magnesium).......................................192 Screeds (Vibrating)...........................................189 Screw Anchor......................................................75 Screw Anchor Bolt Setting Template...................75 Screw Anchor Bolts .........................................75 Screw Anchor Eye Bolts.....................................75 Screw Anchor Setting Bolt..................................75 Screwjacks.......................................................8 - 9 Sealants, Urethane............................................107 Sealers...................................................92-95, 127 Self-Leveling Topping.................................116-117 Self-Leveling Underlayment.......................118,127 Set-EEZ Lubricant.............................................178 Shake-On Floor Hardeners................124-125, 127 She Bolt ......................................................45,72 She Bolt (Outside Stud Rod)...............................68 Shear Bar..........................................................173 Shear Bar For Swift Lift Anchors ......................164 Shelf Angle Insert................................................76 Shim Packs.......................................................168 Shoring Systems..............................................8-19 Shotcrete..............................................................2 Shoulder Eye Bolt .........................................79 Silane / Siloxane Sealers..................................127 Silica Sand............................................................2 Single Flared Coil Loop Insert.............................62 Single Pickup Insert..........................................175 SL Anchors........................................................162 SL Attachment Nut............................................167 SL Attachment Stud with Wing Nuts.................165 SL Countersunk Screw.....................................165 SL Eye Anchor..................................................162 SL Lifting Eyes..................................................161 SL Plus Coil Wing-Nut......................................166 SL Recess Plugs ..............................................163 SL Rubber Ring For Steel Recess Plug............164 SL Safety Pin with Washer................................166 SL Setting Plate with Countersunk Screw.........165 SL Steel Recess Plug.......................................164 SL Stud.............................................................165 SL Tapped Plate................................................166 SL Throw-Away Recess Plug...........................163 SL Universal Lifting Eyes..................................161 SL Wing Nut......................................................166 Slab Bolsters..............................................130-133 Slab Grabbers.....................................................37 Smooth Dowels.................................................139 Snap Tie Shank Wrench.....................................49 Snap Ties............................................................46 Snap Tie Wedges................................................47 Soil Stabilization Products.....................................2 Sonotube.............................................................34 Space Wheels...................................................132
70- FOUNDATION
Spandrel Hook Tie..............................................47 Spandrel Plate Tie..............................................47 Spandrel Point Tie..............................................47 Special Anchor......................................................2 Special Drill-In Lift Plate....................................184 Speed Dowels...................................................155 Speed Step.........................................................56 Speedy Bracket...................................................54 Splice Bars.................................................134-135 Spray Tips.........................................................189 Sprayers....................................................188-189 Spreader Beam.................................................182 Spreader Cleats..................................................49 Squeegees........................................................193 Stainless Steel Snap Tie....................................50 Stains, Color..............................................128-129 Stake for Dowel Baskets..................................139 Stake tor Screed Key and Load Key.................147 Stakes...............................................................144 Stamps, Textured Mats.....................................128 Star Inserts.......................................................169 Stayform..............................................................44 Steel Stakes......................................................144 Steel-Ply..............................................................31 Stencils......................................................128-129 Stiffback Bracket.................................................54 StrapTie ...........................................................48 Stripping Bar.......................................................49 Strongback Tie....................................................50 Stud Rail...........................................................136 Styrofoam..........................................................149 Supertie Fiberglass Rod.....................................74 Supertie Gripper..................................................74 Supertie Spreader Clip........................................74 Supertie Waler Wedge........................................74 Supertie Waterstop.............................................74 Supertie Wedge..................................................74 Sure-Guard Rebar Protector.............................140 Sure-Lock Bracket..............................................53 Sure-Lock Strongback Clamp............................54 Sure-LockTie.......................................................53 Sure Plug ...........................................................54 Sure Plug Insertion Tool......................................54 Sure-Snap Wrench Head Snap Ties...................46 Surface Retarders...............................................99 Swift Lift Plus Holding Stud with Wing Nut........165 Swift Lift Plus Plates .......................................166 Swift Lift Plus Recess Plug...............................163 Swift Lift System........................................161-167 Swivel Lifting Plate...................................178, 180 T Anchor.........................................................172 Tampers............................................................193 Tang, Coil Anchor..............................................178 Tape..................................................................193 Taper Ties................................................45, 68-69 Tension Bar.......................................................173 Thin Slab Ferrule Insert......................................78 Threaded Bar.................................................45,59 Threaded Inserts................................................76 Threaded Plastic Plug........................................84 Threaded Pullout Tie..........................................47 Threaded Steel Setting Plugs............................83 Tie Key...............................................................48
40-BAR SUPPORTS
Tie Plate.......................................................21, 23 Tie Wire............................................................133 Tightening Wrench..............................................70 Tilt Bracket (Edge Form) ..................................184 Tilt-Up Accessories....................................175-185 Tilt-Up Braces....................................................179 Tip To Tip Tie.......................................................47 Toggle Pins............................................................9 Top Jacks..............................................................9 Toggle Coil Ties...................................................64 Tower Chairs.....................................................132 Trench Drains.............................................150-152 Triple Flared Coil Loop........................................65 Trowels..............................................................192 Trowels, Power..................................................189 Truss & Joist Tables.............................................16 Truncated Domes..............................................159 Tube Forms....................................................33-34 Turnbuckle Form Aligner......................................49 Two-Hole Anchor................................................171 Type L Inserts......................................................83 Type B-4 Cushion-Lock Reglet............................84 Underlayments............................................118,127 Urethane Coatings.............................................127 Utility Anchors...................................................167 Vapor Retarders.........................................153-154 Vibrators............................................................191 Vibratory Screeds..............................................189 Visqueen....................................................153-154 Void Forms.................................................149,186 Wale Bolt Assembly.............................................61 Wale Holder.........................................................62 Waler Jack...........................................................38 Waler Tie.............................................................52 Wall Clamps.......................................21, 23, 26-27 Wall Forms.....................................................20-31 Wall Plug.............................................................78 Washer Plates.....................................................58 Water Plug.........................................................122 Water Repellents..............................................127 Waterproof Coating...........................................123 Waterstops.................................................156-158 Wedge (for use with Recess Member)..............174 Wedge Anchors.....................................................2 Wedge Bolt..........................................................52 Welded Wire Fabric...........................................142 Welding Coil Tie..................................................58 Wheels (Plastic Form Spacers).........................132 Window Systems...............................................187 Wing Nut (Coil Thread)........................................65 Wing Nut (Threaded Bar)..............................45, 59 Wire Mesh.........................................................142 Wood Chamfer.....................................................41 Wrench Head Snap Tie Socket...........................50 X FlatTie..............................................................48 YokeBracket........................................................23 Z Tie Holder.........................................................52 Zip Strip Joint Former........................................146
PRODUCTS
50-FLATWORK ACCESSORIES
20-FORMING ACCESSORIES
196
www.atlasform.com