Professional Documents
Culture Documents
Table of contents
SmartWORKS LD Series . ............................ 3
SmartWORKS LD101................................... 5
SmartWORKS NGX...................................... 7
SmartWORKS DP......................................... 9
SmartWORKS DT......................................... 11
SmartWORKS IPX-C..................................... 13
RTS Box........................................................... 15
TX100.............................................................. 17
IPM-260........................................................... 19
IPM-1610......................................................... 21
IPM-6310 Universal Conference...................... 23
IPM-6310 Media Processing............................ 25
Transcoding Resource Blade Series................. 27
TP-260............................................................. 29
TP-1610........................................................... 31
TP-6310........................................................... 33
TP-12610......................................................... 35
Tap Environment
The LD series accomodates low to high density environments with
4, 8, 16, or 24 port blades. The SmartWORKS API supports a total
of 512 channels per system. The tapping point can be anywhere on
an analog line: between Central Office and PBX, Central Office and
phones, or PBX and phones.
Terminate Environment
PSTN
PBX
Dispatcher Console
Reception Console
Direct Line
Recording Application
Live Monitor
LD Application Model
The SmartWORKS LD is perfect for telephony recording and
dialing applications in small to large offices and call centers.
About AudioCodes
System Requirements
Hardware Requirements
Pentium 4/equivalent 2 GHz, PCI motherboard or passive backplane with 3.3V power supply, PCI 2.2 bus
Operating Systems
Windows 2000 Windows XP Windows 2003 32 bit Linux (Call for variant details)
Technical Specifications
Max blades per system: 16 Max ports per system: Up to 512, Resource Sharing Bus
H.100 (409H, 809, 1609, and 2409 only)
Physical Characteristics
Environmental Conditions
Operating Temperature: 0C to +50C Storage Temperature: -20C to +85C Humidity: 8% to 80% noncondensing Storage humidity: 8% to 80% non-condensing
Telephony Interfacing
Telephony Interface
Signal/Noise ratio: 35dB referenced to -15dBm Idle channel noise: Less then 20dBrnc
Crosstalk coupling: Less then -70 dB (0dBm, 1004Hz) Frequency response: 300Hz to 3400Hz +/-3dB
Ring detection: 30Vrms (min), 16 to 68Hz REN: < 0.5 Echo return loss: 28 dB +/- 3dB @1400Hz
Trunk Type: Loop Start/Ground Start Trunk Interface: High Impedance (Z) AC Impedance: 18 kOhms
Voltage Detection: Two software programmable thresholds Range: -61V to + 61V, Accuracy +/- 2V
Trunk Type: Loop Start AC Impedance: Software Selectible (FCC, EU, China, Australia)
Loop Detection: Off Hook: 8mA (max) LD409, LD409H, LD809 On Hook: 6mA (min) LD409, LD409H, LD809
OFF Hook: 11mA (max) LD1609, LD2409 On Hook: 9mA (min) LD1609, LD2409
Telephony Connectors
Host Interface
Bus Compatibility: Complies with PCISIG Bus Specifications: Rev. 2.2 Bus Speed: 33 MHz
Bus Mode: 32 bit bus master/target
Analog Jack/Ports
Audio Connector LD409: 4 ports, no H.100 LD409H: 4 ports LD809: 8 ports LD1609: 16 ports
LD2409: 24 ports
Audio Signal
Receive range: -68 dBm to + 3 dBm Input gain control: +24 to -50 dB Silence Detection: API Programmable
Transmit volume control: +24 to -50 dB to H.100
Software
SDK
Tone Detection
Voice Processing
Caller ID: V.23 & Bell 202 DTMF Detector: Primary & Secondary channel
Echo Cancellation (Terminate) Input Dynamic Range: G.165 compliant Double-talk detection: G.165 compliant
End path delay: 8ms
Telecom: DOC Emissions: FCC Part 15 class A EN 55022 Immunity: EN 55024 Safety: EN 60950
Estimated MTBF: 250,000 hours per Bellcore Method I
G.723.1, G.723.1, G.729A, GSM 6.10, Microsoft GSM, G.726, G.726, OKI, G.726, -law or A-law per G.711
8 bit linear PCM (signed & unsigned), 6 Khz 16 bit linear PCM (signed), 16 bit linear PCM (signed & unsigned)
Wave file formats: Microsoft GSM, Linear signed, 8 & 16-bit PCM
Digitization selection: Programmable per channel, independent for encode and decode
Power Requirements
4 or 8 Channel
+ 3.3 VDC: 1.0 A, +5 VDC: n/a, -12 VDC: n/a, +12 VDC: 100 mA, Watts (Max): 4.5W
16 Channel
+ 3.3 VDC: 1.3 A, +5 VDC: n/a, -12 VDC: n/a, +12 VDC: 200 mA, Watts (Max): 6.7W
24 Channel
+ 3.3 VDC: 1.5 A, +5 VDC: n/a, -12 VDC: n/a, +12 VDC: 220 mA, Watts (Max): 7.6W
Glare Protection
On Demand Voltage Detection
Programmable Voltage Thresholds
Detects Polarity Reversal
Vast CODEC Support
PSTN
PBX
Dispatcher Console
Direct Line
Recording Application
Live Monitor
Reception Console
SmartWORKS LD101
About AudioCodes
Specifications
System Requirements
Hardware Requirements
Pentium 4 or equivalent 2 GHz or better PCI motherboard or passive backplane with 3.3V power supply PCI 2.2 bus VoIP, provides innovative, reliable and cost-effective
Operating Systems
Windows 2000 Windows XP Windows 2003 32 bit Linux (Call for variant details)
Technical Specifications
Max boards per system: Any combination up to 512 ports Max ports per system: Up to 512
Boards Status: On-board LEDs Clocking: Master/Slave
Physical Characteristics
Form Factor: Full or Half-size PCI card Operating Temperature: 0C to +60C Storage Temperature:-20C to
+85C Humidity: 8% to 80% non-condensing Storage humidity: 8% to 80% non-condensing
Telephony Interfacing
Telephony Interface
Signal/Noise ratio: 35dB referenced to -15dBm Idle channel noise: Less then 20dBrnc
Crosstalk coupling: Less then -70 dB (0dBm, 1004Hz) Frequency response: 300Hz to 3400Hz +/-3dB
Ring detection: 30Vrms (min), 16 to 68Hz Ringer Equivalence Number: < 0.5
Echo return loss: 28 dB +/- 3dB @1400Hz External Connector: RJ-14
Trunk Type: Loop Start/Ground Start Trunk Interface: High Impedance (Z) AC Impedance: 18 kOhms
Voltage Detection:Two software programmable Thresholds Range: -61V to + 61V Accuracy: +/- 2V
Telephony Interface (Terminate Mode) Trunk Type: Loop Start AC Impedance: Software Selectible FCC, EU,
China, Australia Loop Detection: Off Hook RJ-14: 8mA (max) On Hook RJ-14: 6mA (min)
Station Port
Loop Current: 25 mA Tip / Ring Voltage: -24 Vdc @ on_hook Input Gain: 0 dB +/- 0.5 dB
Output Gain: -3 dB +/- 0.5 dB Loop Detection: off_hook 7mA(max) / on_hook 5 mA(min)
Noise tolerance: Per LSSGR sec. 6 Talk off: Bellcore TR-TSY-000762 Ring Voltage: NONE
(The LD101 does not provide FXS ring down feature )
Analog Jack
Audio Connector: 3.5mm Male Stereo Plug Output impedance: 300Ohms Input impedance: 33KOhms
Mic bias: +5VDC @ 4.7KOhms Input gain: +9dB Output gain: 0 db @ 300Ohms
Full scale input: 370 mVRMS Full scale output: 1.1 mVRMS open circuit
Audio Signal
Receive range: -68 dBm to + 3 dBm Input gain control: +24 to -50 dB Silence Detection: Programmable from
API Transmit volume control: +24 to -50 dB to H.100 Automatic Gain Control (AGC): Programmable from API
Automatic Volume Control (AVC): Programmable from API Activity Detection: Programmable from API
Frequency Response: 300 - 3400 Hz (+/- 3dB)
Host Interface
Bus Compatibility: Complies with PCISIG Bus Specifications, Rev. 2.2 Bus Speed: 33 MHz
Bus Mode: 32 bit bus master/target
Software
SDK
AudioCodes Native SmartWORKS API SmartControl (Control Panel) SmartVIEW (Card test application)
MF Detection
DTMF digits: 0 - 9, *, #, A, B, C, D Dynamic range: -38 dBm to 0 dBm Minimum tone detection:
40 ms / programmable Interdigit timing: 40 ms min. Acceptable twist: Per LSSGR sec. 6, 8 dB forward,
4 dB reverse Frequency variation: Accept all +/- 1.5%, reject all +/-2.5% Noise tolerance: Per LSSGR sec. 6
Talk off: Bellcore TR-TSY-000762
Audio Digitizing
5.3 Kb/s: G.723.1 6.3 Kb/s: G.723.1 8 Kb/s: G.729A 13 Kb/s: GSM 6.10, Microsoft GSM
16 Kb/s: G.726 24 Kb/s: G.726, OKI 32 Kb/s: G.726, OKI 40 Kb/s: G.726
64 Kb/s: -law or A-law per G.711, 8 bit linear PCM (signed & unsigned)
96 Kb/s: 6 Khz 16 bit linear PCM(signed) 128 Kb/s: 16 bit linear PCM (signed & unsigned)
Voice Processing
Caller ID: V.23 & Bell 202 DTMF Detector: Primary & Secondary channel
Input Dynamic Range: G.165 compliant Double-talk detection: G.165 compliant End path delay: 8ms
Tone Dialing(Terminate)
Frequency variation: Less then 1 Hz Rate: API Programmable Duration: API Programmable
CPM (Terminate)
Number of programmable tones: 20 Number of bandpass filters: 10 Number of filters per tone: 1,2 or 3
Number of cycles: 0 to 255 SIT tones: Yes, programmable frequencies and duration
Answering Machine Detection Yes
Power Requirements
8 Channels:
+ 3.3 VDC: 1.0 A +5 VDC: n/a -12 VDC: n/a +12 VDC: 100 mA
International Headquarters
1 Hayarden Street, Airport City
Lod, Israel 70151
Tel: +972-3-976-4000
Fax: +972-3-976-4040
US Headquarters
27 Worlds Fair Drive
Somerset, NJ 08873
Tel: 1-732-469-0880
Fax: 1-732-469-2298
Contact us: www.audiocodes.com/info
Website: www.audiocodes.com/blades
2007. AudioCodes Ltd. All rights reserved. AC, Ardito, AudioCodes,
AudioCodes logo, AudioCoded, IPmedia, Mediant, MediaPack, MPMLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and VoIPerfect
are trademarks or registered trademarks of AudioCodes Ltd. All other
marks are the property of their respective owners. The information
and specifications in this document and the product(s) are subject to
change without notice.
Ref. # LTRM-20030 V.1 11/06
SmartWORKS NGX
Tap Environment
The NGX is designed for tapping behind a proprietary PBX. Residing
between the PBX and agent phones, the SmartWORKS NGXs high
impedance receivers record both sides of a call without interrupting
service. The NGX is available in 8, 16, and 24 port configurations.
The SmartWORKS API supports a total of 512 channels per system.
As a result, the SmartWORKS NGX is ideal for low to high-density
environments.
PSTN
PBX
Government
Agencies
911/PSAP
Recording Application
SmartWORKS NGX
Specifications
About AudioCodes
System Requirements
Hardware Requirements Pentium 4 or equivalent 2 GHz or better PCI motherboard or passive backplane with 3.3V power supply PCI 2.2 bus
Operating Systems
Technical Specifications
Max boards per system: Any combination up to 512 ports Max ports per system: Up to 512 (16 Boards max)
Resource Sharing Bus: MVIP or H.100
Physical Characteristics
Form Factor: Full-size PCI card Operating Temperature: 0C to +60C Boards Status: On-board LEDs Clocking: Master/Slave
Storage Temperature: -20C to +85C Humidity: 8% to 80% non-condensing Storage humidity: 8% to 80% non-condensing
Bus Compatibility: Complies with PCISIG Bus Specifications, Rev. 2.2 Bus Speed: 33 MHz
Bus Mode: 32 bit bus master/target
Analog Jack
Audio Connector: 3-pin 0.1 ctr header Output impedance: 300Ohms Input impedance: 33KOhms Return loss: >25dB
Mic bias: +5VDC @ 4.7KOhms Input gain: +9dB Output gain: 2.6dBm @ 300Ohms Full scale input: 370 mVRMS
Full scale output:1.5 VRMS open circuit
PBX Interface
Audio Signal
Receive range: -68 dBm to + 3 dBm Input gain control: +24 to -50 dB Silence Detection:Programmable from API
Software
SDK
AudioCodes Native SmartWORKS API SmartControl (Control Panel) SmartVIEW (Card functionality test application)
Activity Detection
Audio Digitizing
5.3 Kb/sG.723.1 8 Kb/s:G.729A 13 Kb/s:GSM 6.10, Microsoft GSM 16 Kb/s:G.726
24 Kb/s:G.726, OKI 32 Kb/s:G.726, OKI 40 Kb/s:G.726 64 Kb/s:-law or A-law per G.711,
8 bit linear PCM (signed & unsigned) 96 Kb/s:6 Khz 16 bit linear PCM(signed)
128 Kb/s: 16 bit linear PCM (signed & unsigned) Wave file formats: Microsoft GSM, Linear signed 8 & 16-bit PCM
Digitization selection
DTMF digits: 0 - 9, *, #, A, B, C, D Dynamic range: -38 dBm to 0 dBm Minimum tone detection: 40 ms /programmable
Interdigit timing: 40 ms min.
Acceptable twist
Per LSSGR sec. 6, 8 dB forward, 4 dB reverse Frequency variation: Accept all +/- 1.5%, reject all +/-2.5%
Noise tolerance: Per LSSGR sec. 6
Talk off
Bellcore TR-TSY-000762
D Channel Events
PBX Event (Command Events) Generated by the PBX and passed to the phone as a command to perform some type of action.
Signaling
These events indicate a call progress tone (dial tone, ring tones), or audio changes
LEDs
Display
These events indicate that the LCD on the phone has been updated. These are usually related to the clock display,
or messages displayed on the LCD.
Phone Events
Generated by the phone indicating an action has been taken (i.e. button pressed).
Hook State
Off hook and on hook changes occur when the handset is removed or replaced
Button events
Indicate that a button on the phone was used. For example: digits pressed, speaker buttons etc.
Power Requirements
NGX (base)
+ 3.3 VDC: 0.9 A +5 VDC: 1.5 mA -12 VDC: 25 mA +12 VDC: 25 mA
NGX (24 channel)
International Headquarters
1 Hayarden Street, Airport City
Lod, Israel 70151
Tel: +972-3-976-4000
Fax: +972-3-976-4040
US Headquarters
27 Worlds Fair Drive
Somerset, NJ 08873
Tel: 1-732-469-0880
Fax: 1-732-469-2298
Contact us: www.audiocodes.com/info
Website: www.audiocodes.com/blades
2007. AudioCodes Ltd. All rights reserved. AC, Ardito, AudioCodes,
AudioCodes logo, AudioCoded, IPmedia, Mediant, MediaPack, MPMLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and VoIPerfect
are trademarks or registered trademarks of AudioCodes Ltd. All other
marks are the property of their respective owners. The information
and specifications in this document and the product(s) are subject to
change without notice.
Ref. # LTRM-20032 V.1 11/06
PSTN
T1/E1 Lines
PBX or Key System
Dual Passive Tap
SmartTAP DP Series
Financial
Institutions
Call Centers
Recording Application
Government
Agencies
911/PSAP
SmartWORKS DP
About AudioCodes
Specifications
System Requirements
Hardware Requirements Pentium 4 or equivalent 2 GHz or better PCI motherboard or passive backplane with 3.3V power supply, PCI 2.2 bus
Operating Systems
Technical Specifications
Max boards per system: Any combination up to 512 ports Max ports per system: Up to 512 (16 Boards max)
Resource Sharing Bus: MVIP or H.100
Physical Characteristics
Form Factor: Full-size PCI card Operating Temperature: 0C to +60C Boards Status: On-board LEDs Clocking: Master/Slave
Storage Temperature: -20C to +85C Humidity: 8% to 80% non-condensing Storage humidity: 8% to 80% non-condensing
Telephony Interface
Host Interface
Bus Compatibility: Complies with PCISIG Bus Specifications, Rev. 2.2 Bus Speed: 33 MHz
Bus Mode: 32 bit bus master/target
Trunk type
T1/E1 Trunk InterfaceDigital High Impedance (Z) AC Impedance 1k Ohms Input Impedance 1000 Ohm +/- 5%
30m (100 feed) of CAT 3 cable Connectors Two RJ-45 connectors E1: 16m
T1 Interface
Receive Clock Rate: 1.544 MHz +/-200ppm Transmit Clock: Recovered RX clock or 50 ppm Input Level: LBO 0dB to -22dB
Framing: SF (D4), ESF
Line Coding
ANSI T1.231 Alarm Detection and Integration LOS, LOF, Yellow, and AIS per ANSI T1.231
Binary Sequence Detector Per ITU-T 0.151
E1 Interface
Receive Clock Rate 2.048 +/- 175ppm Transmit Clock: Recovered RX clock or 50 ppm Input Level 3.2V down to 0.45 V
Framing Basic G.704, CRC-4
Line Coding
AMI, HDB3 Signaling Protocol: ISDN, DASS2, CAS Loss of Signal Detectionper ITU-T G.775
Alarm Detection and Integration: LOS, LOSMF, TS16, CRC, DPNSS, MFRZ (Raw)
+24 to -50 dB to MVIP/H.100 Automatic Gain Control (AGC): Programmable from API
Automatic Volume Control (AVC): Programmable from API
Activity Detection
Software
SDK
AudioCodes Native SmartWORKS API SmartControl (Control Panel) SmartVIEW (Card functionality test application)
DTMF digits: 0 - 9, *, #, A, B, C, D Dynamic range: -38 dBm to 0 dBm Minimum tone detection: 40 ms / programmable
Interdigit timing: 40 ms min.
Acceptable twist
Per LSSGR sec. 6, 8 dB forward, 4 dB reverse Frequency variation: Accept all +/- 1.5%, reject all +/-2.5%
Noise tolerance: Per LSSGR sec. 6
Talk off
Bellcore TR-TSY-000762
Digitization selection
Power Requirements
+ 3.3 VDC: 2.8 A +5 VDC: 5 mA -12 VDC: n/a +12 VDC: 20 mA
Safety and Certifications
Telecom: DOC, Emissions: FCC Part 15 class A EN 55022, Immunity: EN 55024, Safety: EN 60950,
Estimated MTBF: 250,000 hours per Bellcore Method I
Models Avaiable
Terminate Environment
The SmartWORKS DT connects directly to a Central Office or
PBX providing line supervision to answer and generate inbound
and outbound calls. Each blade processes up to 60 channels,
with a maximum of 512 channels per system. Each channel
has programmable volume control, tone generation, echo
cancellation, and Call Progress Monitoring. Outbound dialing
and call control is managed through the SmartWORKS API.
PSTN
16 Channels
16 Channels
PBX
SmartWORKS DT Series
Applications:
Auto-Attendant
Voice Mail
Voice Portal
SmartWORKS DT Series
Applications:
Auto-Attendant
Voice Mail
Voice Portal
SmartWORKS DT
Specifications
About AudioCodes
System Requirements
Hardware
Pentium 4 or equivalent 2 GHz or better PCI motherboard or passive backplane with 3.3V power supply, PCI 2.2 bus
Operating Systems
Windows 2000 Windows XP Windows 2003 32 bit Linux (Call for variant details)
Technical Specifications
Max boards per system: Any combination up to 512 ports Max ports per system: Up to 512
Control Microprocessor Motorola Coldfire RISC (50 MHz)
DSP
Multiple Texas Instruments TMS320C5409 A Boards errors: On-board LEDs Clocking: Master/Slave
DRAM: 16 MB per board SRAM: 128 Kword/DSP
Environmental Conditions Operating Temperature: 0C to +50C Storage Temperature: -20C to +85C Humidity: 8% to 80% non-condensing
Storage humidity: 8% to 80% non-condensing
Physical Characteristics
Telephony Interface
Host Interface
Bus Compatibility: Complies with PCISIG Bus Specifications: Rev. 2.2 Bus Speed: 33 MHz
Bus Mode: 32 bit bus master/target Shared Memory: 16 MB Global shared RAM
Trunk Type
T1 Interface
Receive Clock Rate: 1.544 MHz +/-200ppm Transmit Clock: Recovered RX clock or 50 ppm
Input Level: LBO 0dB to -22dB Framing: SF (D4), ESF Line Coding: AMI, B8ZS
Signaling Protocol
ISDN, NFAS, CAS, Robbed Bit Signaling, E&M Immediate, E&M wink, FXS, FXO
Clock and Data Recovery: Complies with AT&T TR62411 and Bellcore TA-TSY-000170
E1 Interface
Receive Clock Rate: 2.048 +/- 175ppm Transmit Clock: Recovered RX clock or 50 ppm Input Level: 3.2V down to 0.45 V
Framing: Basic G.704, CRC-4 Line Coding: AMI, HDB3 Signaling Protocol: ISDN, DASS2, CAS
Loss of Signal Detection: per ITU-T G.775 Alarm Detection and Integration: LOS, LOSMF, TS16, CRC, and Yellow
Binary Sequence Detector: Per ITU-T 0.151
ANSI T1.231 Alarm Detection and Integration: LOS, LOF, Yellow, and AIS per ANSI T1.231
Binary Sequence Detector Per ITU-T 0.151
Audio Signal
Receive range: -68 dBm to + 3 dBm Input gain control: +24 to -50 dB Silence Detection: Programmable from API
Transmit volume control: +24 to -50 dB Automatic Gain Control (AGC) Programmable from API
Automatic Volume Control (AVC) Programmable from API Activity Detection Programmable from API
Alert Tone Programmable Frequency Response 300 - 3400 Hz (+/- 3dB)
Softtware
Call Progress Monitoring
Number of programmable tones: 20 Number of bandpass filters: 10 Number of filters per tone: 1,2 or 3
Number of cycles: 0 to 255 SIT tones: Yes, programmable frequencies and duration Answering Machine Detection: Yes
Audio Digitizing
5.3 Kb/s: G.723.1 6.3 Kb/s: G.723.1 8 Kb/s: G.729A 13 Kb/s: GSM 6.10, Microsoft: GSM 16 Kb/s: G.726
24 Kb/s: G.726, OKI 32 Kb/s: G.726, OKI 40 Kb/s: G.726 64 Kb/s: -law or A-law per G.711
8 bit linear PCM (signed & unsigned) 96 Kb/s: 6 Khz 16 bit linear PCM(signed)
128 Kb/s: 16 bit linear PCM (signed & unsigned)
Wave file formats
Microsoft GSM, Linear signed 8 & 16-bit PCM Digitization selection: Programmable per channel,
independent for encode and decode
DTMF/MF Tone Detection DTMF digits: 0 - 9, *, #, A, B, C, D MF R2 Digits 15 Digits Forward & Reverse per Q.441
Dynamic range: -38 dBm to 0 dBm Minimum tone detection: 40 ms /programmable Interdigit timing: 40 ms min.
Tone Dialing: Frequency variation less then 1 Hz Rate API Programmable
Acceptable twist
Per LSSGR sec. 6, 8 dB forward, 4 dB reverse Frequency variation: Accept all +/- 1.5%, reject all +/-2.5%
Noise tolerance: Per LSSGR sec. 6 Talk off: Bellcore TR-TSY 000762
Trigger Conditions
Tone Type Single or dual frequency Frequency range 300 Hz 3400 Hz Frequency resolution 1 Hz
Duration 1 ms 8191 ms programmable in 1 ms steps Amplitude +3 dBm to 68 dBm Duration API Programmable
Voice Processing
Echo cancellation G.165 Caller ID V.23 & Bell 202 DTMF Detector Primary & Secondary channel MF Detection R1 & R2
Telecom: DOC Emissions: FCC Part 15 class A EN 55022 Immunity: EN 55024 Safety: EN 60950
Estimated MTBF: 150,000 hours per Bellcore Method I
Models Available:
SDK:
AudioCodes Native SmartWORKS API SmartControl (Control Panel) SmartVIEW (card functionality test application)
SmartWF (firmware flash update utility)
Power Requirements
+3.3 VDC: 2.8 Amp +5 VDC: 5mA -12 VDC: Not Required +12 VDC: 20 mA
International Headquarters
1 Hayarden Street, Airport City
Lod, Israel 70151
Tel: +972-3-976-4000
Fax: +972-3-976-4040
US Headquarters
27 Worlds Fair Drive
Somerset, NJ 08873
Tel: 1-732-469-0880
Fax: 1-732-469-2298
Contact us: www.audiocodes.com/info
Website: www.audiocodes.com/blades
2007. AudioCodes Ltd. All rights reserved. AC, Ardito, AudioCodes,
AudioCodes logo, AudioCoded, IPmedia, Mediant, MediaPack, MPMLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and VoIPerfect
are trademarks or registered trademarks of AudioCodes Ltd. All other
marks are the property of their respective owners. The information
and specifications in this document and the product(s) are subject to
change without notice.
Ref.# LTRM-20029 V.1 11/06
Tapping Environment
The IPX-C is designed for IP call recording applications. Its active
interfaces can be connected directly to an available mirror port.
When used in conjunction with a TX100, it can be connected
passively anywhere within the IP-PBX configuration.
Each blade is capable of processing up to 256 media sessions.
Session Management
The IPX-C includes a Session Manager for tracking media sessions
on the IP network. Each media session is treated as a unique call
with a unique session ID.
Your application can easily manage call forwarding with the
session IDs provided by the IPX-C.
Station Management
Automatically locates all VoIP stations on the network and assigns
a unique ID to each endpoint. IPX-C dynamically identifies phones
as they are added to the network and reports when they are
removed.
Core Switch
PSTN
Call Agent
TX100
SmartWORKS IPX-C
Workgroup Switch
IPM 260
IP Phones
SmartWORKS IPX-C
Workgroup Switch
IPM 260
IP Phones
About AudioCodes
System Requirements
Hardware
P4 CPU at 850MHz
ATX PCI motherboard or passive back-plane with 3.3V ATX power supplier
PCI 2.3 bus Bus speed: 33 or 66 MHz Bus mode: 32 bits
Operating Systems
Technical Specifications
Environmental conditions
Physical characteristics
VoIP protocols
EN55024
Safety
EN60950
Accessories
TX100
TX100PCI
Optional Accessories
TX100 North America
910.0331.003
TX100 Universal
910.0331.002
TX100i
910.0331.004
19 Racmount Kit (Max 3) 910.0331.005
Blank Panel
910.0331.006
PSTN
PBX
RTS BOX
Phones
Recording Application
RTS Box
About AudioCodes
AudioCodes Ltd. (NASDAQ: AUDC), Your Gateway to
VoIP, provides innovative, reliable and cost-effective
Voice over Packet (VOP) technology and Voice
Network products to OEMs, Network Equipment
Providers, Service Providers and System Integrators
worldwide. AudioCodes provides a diverse range of
flexible, comprehensive media gateway and media
processing technologies (based on VoIPerfect
AudioCodes underlying, best-of-breed, core media
gateway architecture) and Session Border Controllers
(SBCs). The company is a market leader in product
development, focused on VoIP Media Gateway, Media
Server and SBC technologies and network products.
AudioCodes has deployed tens of millions of media
gateway and media server channels globally over
the past few years and is a key originator of the ITU
G.723.1 standard for the emerging Voice over IP
market. The Company is a VoIP technology leader
focused on quality, having recently received a number
one ranking from ETSI for outstanding voice quality in
its media gateways and media servers. AudioCodes
voice network products feature media gateway and
media server platforms for packet-based applications
in the converged, wireline, wireless, broadband
access, enhanced voice services and video markets.
AudioCodes enabling technology products include
VoIP and CTI communication blades, VoIP media
gateway processors and modules, and CPE devices.
AudioCodes headquarters and R&D facilities are
located in Israel with an R&D extension in the U.S.
Other AudioCodes offices are located in Europe, the
Far East, and Latin America.
International Headquarters
1 Hayarden Street, Airport City
Lod, Israel 70151
Tel: +972-3-976-4000
Fax: +972-3-976-4040
US Headquarters
27 Worlds Fair Drive
Somerset, NJ 08873
Tel: 1-732-469-0880
Fax: 1-732-469-2298
Contact us: www.audiocodes.com/info
Website: www.audiocodes.com/blades
2007. AudioCodes Ltd. All rights reserved. AC, Ardito, AudioCodes,
AudioCodes logo, AudioCoded, IPmedia, Mediant, MediaPack, MPMLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and VoIPerfect
are trademarks or registered trademarks of AudioCodes Ltd. All other
marks are the property of their respective owners. The information
and specifications in this document and the product(s) are subject to
change without notice.
Ref. # LTRM 20227 V.1 11/06
TX100
Call Agent
TX100
Workgroup Switch
SmartWORKS IPX
IPM 260
IP Phones
TX100
SmartWORKS IPX
Workgroup Switch
IPM 260
IP Phones
TX100
Specifications
About AudioCodes
System Requirements
Dimensions 1 1/4H x 5 9/16 W x 5 1/4 D
Power Supply 12Vdc, 200mA
Max cable length
AudioCodes
All rights reserved. AC, Ardito, AudioCodes, AudioCodes logo, AudioCoded,
2007.
Ltd.
IPmedia,
Mediant, MediaPack,
MP-MLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and
VoIPerfect
are trademarks
or registered trademarks of AudioCodes Ltd. All other marks are the
property
of their respective
owners. The information and specifications in this document and the
product(s)
are subject
to change without notice.
2007. AudioCodes Ltd. All rights reserved. AC, Ardito, AudioCodes, AudioCodes logo, AudioCoded,
IPmedia,
Mediant, MediaPack,
MP-MLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and
VoIPerfect
are trademarks
or registered trademarks of AudioCodes Ltd. All other marks are the
property
of their respective
owners. The information and specifications in this document and the
product(s)
are subject
to change without notice.
2007.
AudioCodes
Ltd.
All rights reserved. AC, Ardito, AudioCodes, AudioCodes logo, AudioCoded,
IPmedia,
Mediant, MediaPack,
MP-MLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and
VoIPerfect
are trademarks
or registered trademarks of AudioCodes Ltd. All other marks are the
property
of their respective
owners. The information and specifications in this document and the
product(s)
are subject
to change without notice.
2007. AudioCodes Ltd. All rights reserved. AC, Ardito, AudioCodes, AudioCodes logo, AudioCoded,
IPmedia,
Mediant, MediaPack,
MP-MLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and
VoIPerfect
are trademarks
or registered trademarks of AudioCodes Ltd. All other marks are the
property
of their respective
owners. The information and specifications in this document and the
product(s)
are subject
to change without notice.
Features
Encryption
Low Latency
*
**
About AudioCodes
IPM260/TRB
IPM1610/TRB
Windows 2000, XP, 2003 - Linux - Solaris on Intel/Sparc
IPM6310/TRB
International Headquarters
1 Hayarden Street, Airport City
Lod, Israel 70151
Tel: +972-3-976-4000
Fax: +972-3-976-4040
US Headquarters
27 Worlds Fair Drive
Somerset, NJ 08873
Tel: 1-732-469-0880
Fax: 1-732-469-2298
Contact us: www.audiocodes.com/info
Website: www.audiocodes.com/blades
2007. AudioCodes Ltd. All rights reserved. AC, Ardito, AudioCodes,
AudioCodes logo, AudioCoded, IPmedia, Mediant, MediaPack, MPMLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and VoIPerfect
are trademarks or registered trademarks of AudioCodes Ltd. All other
marks are the property of their respective owners. The information
and specifications in this document and the product(s) are subject to
change without notice.
Ref. # LTRM-20025 V.2 11/06
2007. AudioCodes Ltd. All rights reserved. AC, Ardito, AudioCodes, AudioCodes logo, AudioCoded,
IPmedia,
Mediant, MediaPack,
MP-MLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and
VoIPerfect
are trademarks
or registered trademarks of AudioCodes Ltd. All other marks are the
property
of their respective
owners. The information and specifications in this document and the
product(s)
are subject
to change without notice.
AudioCodesLtd.
All rights reserved. AC, Ardito, AudioCodes, AudioCodes logo, AudioCoded,
2007.
IPmedia,
Mediant, MediaPack,
MP-MLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and
VoIPerfect
are trademarks
or registered trademarks of AudioCodes Ltd. All other marks are the
property
of their respective
owners. The information and specifications in this document and the
product(s)
are subject
to change without notice.
2007.
AudioCodesLtd.
All rights reserved. AC, Ardito, AudioCodes, AudioCodes logo, AudioCoded,
IPmedia,
Mediant, MediaPack,
MP-MLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and
VoIPerfect are trademarks or registered trademarks of AudioCodes Ltd. All other marks are the
property
of their respective
owners. The information and specifications in this document and the
product(s)
are subject
to change without notice.
2007. AudioCodes
Ltd. All rights reserved. AC, Ardito, AudioCodes, AudioCodes logo, AudioCoded,
IPmedia,
Mediant, MediaPack,
MP-MLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and
VoIPerfect
are trademarks
or registered trademarks of AudioCodes Ltd. All other marks are the
specifications
and the
property
of their respective
owners.
The
information and
in this
document
About AudioCodes
AudioCodes Ltd. (NASDAQ: AUDC), Your Gateway to VoIP, provides
innovative, reliable and cost-effective Voice over Packet (VOP) technology,
Voice Network products, and applications to OEMs, Network Equipment
Providers, Service Providers and System Integrators worldwide.
AudioCodes provides a diverse range of flexible, comprehensive media
gateway and media processing technologies (based on VoIPerfect
AudioCodes underlying, best-of-breed, core media gateway architecture)
and Session Border Controllers (SBCs). The company is a market leader
in product development, focused on VoIP Media Gateway, Media Server
and SBC technologies and network products. AudioCodes has deployed
tens of millions of media gateway and media server channels globally
over the past few years and is a key originator of the ITU G.723.1 standard
for the emerging Voice over IP market. The Company is a VoIP technology
leader focused on quality, having recently received a number one ranking
from ETSI for outstanding voice quality in its media gateways and media
servers. AudioCodes voice network products feature media gateway and
media server platforms for packet-based applications in the converged,
wireline, wireless, broadband access, enhanced voice services and video
markets. AudioCodes enabling technology products include VoIP and CTI
communication blades, VoIP media gateway processors and modules, and
CPE devices. AudioCodes headquarters and R&D facilities are located in
Israel with an R&D extension in the U.S. Other AudioCodes offices are
located in Europe, the Far East, and Latin America. For further information
on AudioCodes, visit www.audiocodes.com
International Headquarters
1 Hayarden Street, Airport City
Lod, Israel 70151
Tel: +972-3-976-4000
Fax: +972-3-976-4040
US Headquarters
27 Worlds Fair Drive
Somerset, NJ 08873
Tel: 1-732-469-0880
Fax:1-732-469-2298
Contact us: www.audiocodes.com/info
Website: www.audiocodes.com/blades