You are on page 1of 3

HANWEI ELETRONICS CO.

,LTD

MC SERIES

http://www.hwsensor.com

MC series catalytic(hot wire) gas sensor HANWEI catalytic bead sensor operate on the catalytic combustion principle, the gas sensor consists of an active element and a reference element with the same resistance, At the heart of each element is a heated platinum coil whose resistance varies with temperature, in the presence of the gas, the active element will burn the gas on its surface, raising the temperature of the platinum coil, a differential is created in the resistances of the two elements. When both elements are placed in a wheatstone bridge circuit, this differential acts to throw the bridge out of balance, producing a signal which is proportional to the gas concentration. FEATURES BASIC TESTING CIRCUIT linear output signal for gas concentration. Virtually unaffected by temperature and humidity, remarkable reproducibility and accuracy. APPLICATIONS Domestic and industrial gas detecting for combustible gas, natural gas, LPG, coal gas, alkane etc and organic solvent steam like gasoline, alcohol, ketone, benzene and so forth. Combustible gas leak alarm Combustible gas detector Gas densitometers SPECIFICATIONS Model MC101 MC108 MC112 MC115 MC116 MC105

Picture

Detecting scope Working Voltage Working current PH(Heater Consumption)

~100%LEL 3.00.1 V  140mA  420mW

~100%LEL 5.0V0.1 V  120mA  600mW

~100%LEL 3.00.1 V  140mA  420mW

~100%LEL 3.00.1 V  140mA  420mW

~100%LEL 2.50.1 V  180mA  450mW

~100%LEL 2.50.1 V  180 mA  450mW

sensitivity mV linearity % Response time Resume time size mm housing/configura tion Using environment Storage environment

>25mV/ 10000ppm CH4 4

>50mV/ 10000ppm CH4

>20mV/ 10000ppm CH4 <10s <30s 101418 single Metallurgy powder


Configuration C

>20mV/ 10000ppm CH4 5

>20mV/ 10000ppm CH4 5

>20mV/ 10000ppm CH4 <10s <30s D12H10 single Nylon 66


Configuration A

D12H10 single Nylon 66


Configuration A

D19H24 single metal


Configuration B

D6H7.5 separateness metal


Configuration D

D8H10 separateness metal


Configuration E

-20+50 Humidity: less than 95%RH -30+70 Humidity: less than 70%RH

TEL:86-371-65333098 65333099

FAX:86-371-65333090

E-mail: sensor@371.net

HANWEI ELETRONICS CO.,LTD

MC SERIES

http://www.hwsensor.com

Gas sensitivity characteristics


100 90 80 70 Vout (mV) 60 50 40 30 20 10 0 0 0. 5 1 G concent r at i on( vol % as ) 1. 5 2 2. 5 3

Response characteristics

sensi t i vi t y C4 H LPG H 2

MC Series Long term stability The drift in air per year is less than 1 mV, in 1% CH4 gas is less than 2Mv. for a short period storage (in 2 weeks), the sensor need 30mins preheating to stabilize, for more than one year storage, it need more than 5 hours preheating.

Long t er m st abi l i t y i n gas


24 20 16 Vout (mV) 12 8 4 0 -4 0 5 10 15 Ti m m hs) e( ont 20 25 30 i n 1% CH4 i n ai r

MC Series output signal dependency on environmental humidity and temperature


Tem at ur e dependency( RH: 60% per ) 5 3 Vout in Air(mV) 1 -1 -3 -5 - 20 Tem at ur e per 0 20 40 60
Tem at ur e dependency( RH: 60% per ) 20 Vout in 1% CH4(mV) 18 16 14 12 10 8 - 20 0 20 40 Tem at ur e per 60

TEL:86-371-65333098 65333099

FAX:86-371-65333090

E-mail: sensor@371.net

HANWEI ELETRONICS CO.,LTD

MC SERIES

http://www.hwsensor.com

Hum di t y dependency i 4 Vout in Air(mV) 2 0 -2 -4 0 30 Rel at i ve Hum t y( % i ) 60 90

20 18 Vout in 1% CH4(mV) 16 14 12 10 8 0

Hum di t y dependency i

Rel at i ve Hum di t y( % i ) 30 60 90

MC series output signal dependency on working voltage


4 Vol t age depency on out i n ai r Vout in Air(mV) 2 0 -2 Suppl y Vol t age ) V -4 2. 8 2. 9 3 3. 1 3. 2

20 19 Vol t age dependency on out put i n 18 gas( 1% CH4) 17 16 15 14 13 12 11 10 Suppl y Vol t age( V) 9 8 2. 8 2. 9 3 3. 1 3. 2

Note The sensor sensitivity needs to calibrate thermally. Try to avoid meeting the combustible gas up to 15% concentration. If happened accidentally, please recalibrate. When debugging, should strict to control the heating voltage or current, do not exceed rated voltage to burn the sensor. For long period storage, do not put it in wet and corrosive environment. Shocking, falling, and mechanical destroying is prohibited

TEL:86-371-65333098 65333099

FAX:86-371-65333090

Vout in gas(mV)

E-mail: sensor@371.net

You might also like