Professional Documents
Culture Documents
131
OPA
2131
OPA
4131
OPA
131
OPA
2131
OP A41 31
OPA 4131
DESCRIPTION
The OPA131 series of FET-input op amps provides high performance at low cost. Single, dual and quad versions in industry-standard pinouts allow cost-effective design options. The OPA131 series offers excellent general purpose performance, including low offset voltage, drift, and good dynamic characteristics. Single, dual and quad versions are available in DIP and SOIC packages. Performance grades include commercial and industrial temperature ranges.
OPA4131
OPA4131 Out A
Out A In A +In A V+ +In B In B Out B 1 2 A 3 4 5 B 6 7 14-Pin DIP SO-14 C 9 8 In C D 12 11 10 +In D 14 13 Out D
1 2 A D 3 4 5 B C 6 7 8 SOL-16
16 15 14 13 12 11 10 9
In A
In D
+In A V+
V
+In B
+In C
In B Out B
Out C
NC
International Airport Industrial Park Mailing Address: PO Box 11400 Tel: (520) 746-1111 Twx: 910-952-1111 Cable: BBRCORP
Tucson, AZ 85734 Street Address: 6730 S. Tucson Blvd. Tucson, AZ 85706 Telex: 066-6491 FAX: (520) 889-1510 Immediate Product Info: (800) 548-6132
PDS-1256C
SPECIFICATIONS
At TA = +25C, VS = 15V, and RL = 2k, unless otherwise noted. OPA131PA, UA OPA2131PA, UA OPA4131PA, UA, NA PARAMETER OFFSET VOLTAGE Input Offset Voltage OPA131P, U models only vs Temperature(1) vs Power Supply OPA131P, U models only INPUT BIAS CURRENT(2) Input Bias Current vs Temperature Input Offset Current NOISE Input Voltage Noise Noise Density, f = 10Hz f = 100Hz f = 1kHz f = 10kHz Current Noise Density, f = 1kHz INPUT VOLTAGE RANGE Common-Mode Voltage Range Common-Mode Rejection OPA131P, U models only INPUT IMPEDANCE Differential Common-Mode OPEN-LOOP GAIN Open-Loop Voltage Gain OPA131P, U models only FREQUENCY RESPONSE Gain-Bandwidth Product Slew Rate Settling Time 0.1% 0.01% Total Harmonic Distortion + Noise OUTPUT Voltage Output, Positive Negative Short-Circuit Current POWER SUPPLY Specified Operating Voltage Operating Voltage Range Quiescent Current (per amplifier) TEMPERATURE RANGE Operating Range Storage Thermal Resistance, JA 8-Pin DIP SO-8 Surface-Mount 14-Pin DIP SO-14, SOL-16 Surface-Mount * Specifications same as OPA131PA, OPA131UA. NOTES: (1) Guaranteed by wafer test. (2) High-speed test at TJ = 25C. (V)+3 70 80 CONDITION MIN TYP 0.2 0.2 2 50 50 MAX 1 0.75 10 200 100 MIN OPA131PJ, UJ OPA2131PJ, UJ OPA4131PJ, NJ TYP * * * MAX 1.5 * * UNITS mV mV V/C V/V V/V pA pA
VCM = 0V VCM = 0V
* * *
* *
21 16 15 15 3 (V+)1 80 86 1010 || 1 1012 || 3 94 100 110 110 4 10 1.5 2 0.0008 (V+)3 (V)+3 (V+)2.5 (V)+2.5 25 15 1.5 * * * * *
* * * * * * *
nV/Hz nV/Hz nV/Hz nV/Hz fA/Hz V dB dB || pF || pF dB dB MHz V/s s s % V V mA V V mA C C C/W C/W C/W C/W
* * *
4.5 IO = 0 40 40
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility for the use of this information, and all use of such information shall be entirely at the users own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support devices and/or systems.
OPA131/2131/4131
PACKAGE INFORMATION
MODEL Single OPA131PJ OPA131PA OPA131P OPA131UJ OPA131UA OPA131U Dual OPA2131PJ OPA2131PA OPA2131UJ OPA2131UA Quad OPA4131PJ OPA4131PA OPA4131UA OPA4131NJ OPA4131NA PACKAGE 8-Pin Plastic DIP 8-Pin Plastic DIP 8-Pin Plastic DIP SO-8 Surface-Mount SO-8 Surface-Mount SO-8 Surface-Mount 8-Pin Plastic DIP 8-Pin Plastic DIP SO-8 Surface-Mount SO-8 Surface-Mount 14-Pin Plastic DIP 14-Pin Plastic DIP SOL-16 Surface-Mount SO-14 Surface-Mount SO-14 Surface-Mount PACKAGE DRAWING NUMBER(1) 006 006 006 182 182 182 006 006 182 182 010 010 211 235 235
NOTE: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix D of Burr-Brown IC Data Book.
ORDERING INFORMATION
MODEL Single OPA131PJ OPA131PA OPA131P OPA131UJ OPA131UA OPA131U Dual OPA2131PJ OPA2131PA OPA2131UJ OPA2131UA Quad OPA4131PJ OPA4131PA OPA4131UA OPA4131NJ OPA4131NA
PACKAGE 8-Pin Plastic DIP 8-Pin Plastic DIP 8-Pin Plastic DIP SO-8 Surface-Mount SO-8 Surface-Mount SO-8 Surface-Mount 8-Pin Plastic DIP 8-Pin Plastic DIP SO-8 Surface-Mount SO-8 Surface-Mount 14-Pin Plastic DIP 14-Pin Plastic DIP SOL-16 Surface-Mount SO-14 Surface-Mount SO-14 Surface-Mount
TEMPERATURE RANGE 0 to +70C 40C to +85C 40C to +85C 0 to +70C 40C to +85C 40C to +85C 0 to +70C 40C to +85C 0 to +70C 40C to +85C 0 to +70C 40C to +85C 40C to +85C 0 to +70C 40C to +85C
OPA131/2131/4131
80 60 40
90
Phase Shift ()
100
120 Dual and quad devices. G = 1, all channels. Quad measured channel A to D or B to Cother combinations yield improved rejection. 10 100 1k Frequency (Hz) RL = 2k
10
10
100
80 10k 100k
INPUT BIAS CURRENT vs INPUT COMMON-MODE VOLTAGE 1k Input bias current is a function of the voltage between the V supply and the inputs. 100
IB
IOS
VCM = 0V
VS = 15V 10
OPA131/2131/4131
115
1.6
30
110
105
15
Units (%)
20 15 10 5
10
0
1400 1200 1000 800 600 400 200 0 200 400 600 800 1000 1200 1400
TOTAL HARMONIC DISTORTION + NOISE vs FREQUENCY 1 VO = 3.5Vrms 0.1 THD + Noise (%) G = 100V/V 0.01 G = 10V/V 0.001 G = 1V/V 0.0001 10 100 1k Frequency (Hz) 10k 100k BandwidthLimited
20
10 VS = 5V
IQ VS = 15V
OPA131/2131/4131
50mV/div
5V/div
200ns/div
1s/div
40
G = +2
G = 1
30 G = 10 G=1
10 0.01% 0.1%
20
10
0 100pF
10nF
20
25
30
OPA131/2131/4131
APPLICATIONS INFORMATION
OPA131 series op amps are unity-gain stable and suitable for a wide range of general-purpose applications. Power supply pins should be bypassed with 10nF ceramic capacitors or larger. OPA131 series op amps are free from unexpected output phase-reversal common with FET op amps. Many FETinput op amps exhibit phase-reversal of the output when the input common-mode voltage range is exceeded. This can occur in voltage-follower circuits, causing serious problems in control loop applications. All circuitry is completely independent in dual and quad versions, assuring normal behavior when one amplifier in a package is overdriven or short-circuited. OFFSET VOLTAGE TRIM The OPA131 (single op amp version) provides offset voltage trim connections on pins 1 and 5. Offset voltage can be adjusted by connecting a potentiometer as shown in Figure 1. This adjustment should be used only to null the offset of the op amp, not system offset or offset produced by the signal source.
2 3
V+
FIGURE 1. OPA131 Offset Voltage Trim Circuit. INPUT BIAS CURRENT The input bias current is approximately 5pA at room temperature and increases with temperature as shown in the typical performance curve Input Bias Current vs Temperature. Input bias current also varies with common-mode voltage and power supply voltage. This variation is dependent on the voltage between the negative power supply and the common-mode input voltage. The effect is shown in the typical curve Input Bias Current vs Common-Mode Voltage.
OPA131/2131/4131
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.