Professional Documents
Culture Documents
FEATURES
s Center frequency range between 450 and 470kHz is available. Standard tolerance is 2kHz. s For synthesizers, the types of center frequencies 450, 459 and 468kHz are available. Standard tolerance is 1kHz. s The part numbers of the types for synthesizers are as follows: (In case of 450kHz) SFU450A3 (for contact to resistor) SFU450C5 (for contact to resistor) SFU450B14 (for contact to IFT) SFZ450HL3/JL3/KL3 SFZ450H3/J3/K3 (for contact to resistor)
DIMENSIONS: mm
SFU455A/C5/B
7 0.3 .0 3.5 0.3
MARKING
M
SFZ455HL/JL/KL
7 0.3 .0
3.5 0.3
MARKING
9.0 0.3
9.0 0.3
3.5
1.0 0.5
0.25 0.1
3.5
1.0 0.5
1.75 0.5 2.5 0.2 : EIA-J Date Code 2.5 0.2 Connection INPUT GROUND OUTPUT
1.75 0.5
SPECIFICATIONS
Part Number 3dB Band Width (kHz)
10 3 5 1.5 10 3 41 5.5 1 71
SFU 455kHz
Selectivity +9kHz off (dB) min.
3 (5.5) 7 (10) 3 (5.5) 23 (28) 18 (22) 16 (20)
Composition
1 Element for contact to resistor 1 Element for contact to resistor 1 Element for contact to IFT 2 Elements 2 Elements 2 Elements
( ) Typical value
SERIES
TYPE
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8 and P10E-2.
100
DIMENSIONS: mm
BFU Series
3.5 0.3
SFZ Series
7.0 0.3 4.0 0.5 1.5 max.
M
7.0 0.3
MARKING
M
9.0 0.3
3.5 0.5
9.0 0.3
MARKING
0.25 0.1
5.0 0.2
NO DIRECTIVITY
SPECIFICATIONS
Part Number
BFU450K3 BFU450C BFU450C4N
fa fr (kHz)
27.5 4.5 14 2 92
Capacitance (pF)
550 20% 360 20% 360 20%
Part Number
SFZ450C3N
Selectivity
f0 9kHz (30dB) f0 + 9kHz (24dB)
Application
IF Signal Detection
( ) Typical value
SERIES
TYPE
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P10E-2.
101
FILTERS
DIMENSIONS: mm
PFB455JR
7 0.3 .0 2.4 0.3 0.4 0.1
MARKING
PFS450A*
7 0.3 .0 2.4 0.3 0.4 0.1
MARKING
PFWCC450J3*
5.0 0.3 0.4 0.1
Input Mark IN
55 J
M
GND
OUT GND 5.7 0.3 1.5 0.2 1.2 0.2 1.2 0.2
1.5 0.5
0.6 0.1
5.0 1.0 0.18 0.05 0.7 0.3 2.5 0.2 2.5 0.2 0.7 0.3
1.0 0.2
0.3 0.25 Connection INPUT GROUND OUTPUT 1.0 0.2 4.0 0.2
*Available on tape
SPECIFICATIONS
Part Number 3dB Band Width (kHz)
5.5 1.5 4.5 1.5 5.5 1.5
Composition
SERIES
FREQUENCY in kHz
TYPE
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P10E-2.
102
FEATURES
s Low profile, high selectivity s Easily mountable on any PC board.
DIMENSIONS: mm
SFPS450H
8.0 0.3 MARKING 7 0.3 .0
M
CFWS450HT
11.0 0.5 MARKING
M
7 0.5 .0
0.8 0.1
0.3 0.1
0.15 0.05
0.6 0.1
4.2 0.3 Connection 3.3 0.5 : EIA-J Date Code INPUT GROUND OUTPUT
1.35 0.3
2.3 0.5
2.3 0.3
SPECIFICATIONS
Part Number 6dB Bandwidth (kHz) min.
3.0 (4.0)
CFWS450 kHz/SFPS450kHz
Selectivity 9kHz off (dB) min.
40 (60)
Matching Impedance (k )
2.0
Composition
SFPS450H
CFWS450HT
3.0 (4.0)
50 (75)
6 (2.0)
2.0
SERIES
Available as standard through authorized Murata Electronics Distributors.
BANDWIDTH
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P10E-2.
103
FILTERS
FEATURES
s The filters are mountable by automatic placers. s The filters can be reflow soldered and withstand washing.
DIMENSIONS: mm
CFUCG/SFGCG
CO.5 1.0 0. 1.0 0. 1 1 6.5 7.5 max. 1.0 4.0 6.0 Sealing 1.2 0.1 7.5 3.0 1.5 1.5 Sealing INPUT GROUND OUTPUT 0.9 0.1
SFPC
7.0 3.0 8.4 max. 1.5 2.0
50D
M
2.0
Sealing
SPECIFICATIONS
Part Number
CFUCG455D-TC CFUCG455E-TC CFUCG455F-TC CFUCG455G-TC CFUCG455FX-TC CFUCG455GX-TC CFUCG455HX-TC SFGCG455AX2-TC SFGCG455BX-TC SFGCG455CX-TC SFGCG455DX-TC SFGCG455EX-TC SFPC455E-TC SFPC455F-TC SFPC455G-TC SFPC455H-TC SFGCG455AX-TC
CFUCG/SFGCG/SFPC SERIES
Center Frequency Bandwidth (Total) Ripple (max.) Group Delay (max.) _____________________________________________________________ *Insertion Stop Band ___________________ Source Loss Atten. (min.) and Load Nom. Tol. 3dB (min.) 6dB (min.) 40dB (max.) Point of Point of Impedance S dB Measure (max.) at 100kHz (kHz) (kHz) (kHz) (kHz) (kHz) Measure dB dB ( )
455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 1.5 1.5 1.5 1 1.5 1 1 1.5 1.5 1 1 1.5 1.5 1 1 2 28 10 15 12 9 12 9 6 30 25 20 15 15 12 9 6 35 20 30 25 20 30 25 20 70 70 60 50 40 30 25 20 80 2.0 1.5 1.5 1.5 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1 7 5 4 3 4 3 2 10 10 8 7 5 5 4 3 2 10 4 6 6 6 6 6 7 5 5 6 7 8 6 6 6 6 4 27 27 27 25 27 25 25 25 25 25 23 23 27 27 25 35 25 25 25 25 15 15 15 20 20 15 4 3 2 10 10 8 7 5 10 1500 1500 1500 1500 1500 1500 1500 1000 1000 1000 1500 1500 1500 1500 1500 2000 1000
*Note: For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
SERIES
BANDWIDTH
TAPE CARRIER
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8.
104
FEATURES
s These miniature filters have high mechanical strength. s Low loss, favorable waveform symmetry, and high selectivity s Various band widths are available for
DIMENSIONS: mm
STANDARD SERIES
7.0
E10.7S
M
A10 SERIES
Low Loss
7.0
C10 SERIES
Low Profile
8.0 7.0 5.0
10.7SC
M
TEST CIRCUIT
R1 6.0 max. 5.0 2.5 2.5 31 Rg + R1 = R2 = 330 5% C = 10pF (including stray capacitance and input capacitance of RF Voltmeter) R2 C
7.0 5.0
E10.7S
M
Rg=50 S.S.G.
RF Voltmeter
2.5 2.5 31
2.5 2.5 31
SPECIFICATIONS
Part Number
FM-IF SFE10.7MA5-A SFE10.7MS2-A SFE10.7MS3-A SFE10.7MA5A10-A SFE10.7MS2A10-A SFE10.7MS3A10-A SFE10.7MJA10-A SFE10.7MA5B10-A SFE10.7MS2B10-A SFE10.7MS3B10-A SFE10.7MA5C10-A SFE10.7MS2C10-A SFE10.7MS3C10-A SFE10.7MJC10-A SFE10.7MHC10-A
A10 Series
B10 Series
3.0 2.0 3.0 2.0 5.0 2.0 3.0 2.0 3.0 2.0 3.5 2.0 4.5 2.0 7.0 2.0
(
C10 Series
Most suitable for a thin type and low profile set. The performance is the same as that of conventional types.
SERIES
RATING, CHARACTERISTICS
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P61E-4.
105
FILTERS
FILTERS FOR FM APPLICATIONSHIGHLY SELECTIVE G.D.T. FLAT TYPE SFE MX/MA8/ML 10.7MHz
The SFE 10.7MX/MA8/ML lines of ceramic filters were designed to minimize the dispersion of amplitude and phase characteristics within the pass band. Because the excellent G.D.T. characteristics of these filters insure signal integrity, they are recommended for use in applications ranging from high grade stereo receivers to digital transmission systems. FEATURES s Little dispersion of amplitude characteristics and phase characteristics (G.D.T. characteristics) s The SFE 10.7 MX Series has G.D.T. characteristics and is useful for obtaining low distortion. SFE 10.7 ML Series, in these ceramic filters, being in harmony with flatness of G.D.T., roundness of the amplitude and selectivity characteristics, therefore, these ceramic filters are suitable to high-grade stereo tuners. Even if mismatching condition, they can keep little distortion because of low Qm of ceramic material. The SFE 10.7 MA8 Series is based on SFE 10.7 MA5/MS2/MS3, and it obtains high selectivity with low loss. There is little dispersion of amplitude and G.D.T. characteristics, and low distortion rate can be obtained. s All products are inspected for symmetry and roundness of amplitude
DIMENSIONS
MX SERIES
Low Distortion
9.0 max.
E10.7X
M
MA8 SERIES
High Selectivity, Low Loss
7.0 2
E10.7A
M
ML SERIES
Selectivity
7.0 2
E10.7L
M
TEST CIRCUIT
R1
7.0 2 5.0 1
7.0 2
Rg=50 S.S.G.
R2
RF Voltmeter
2.5
2.5 31
2.5
2.5 31
5.0 1 2.5 2.5 31 R1 + Rg = R2 = 330 C = 10pF (including stray capacitance and input capacitance of RF Voltmeter) INPUT GROUND OUTPUT
SPECIFICATIONS
Part Number
SFE10.7MX-A SFE10.7MX2-A SFE10.7MZ1-A SFE10.7MZ2-A SFE10.7MA8-A SFE10.7MS2G-A SFE10.7MS3G-A SFE10.7ML-A SFE10.7MP3-A SFE10.7MM-A
MX Series
MA8 Series
ML Series
Input/output impedance: 330 The rank of center frequency is available in two series: 30kHz steps and 25kHz steps. The G.D.T. waveforms of all these types are controlled.
SERIES
RATING, CHARACTERISTICS
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P61E-4.
106
FEATURES
s It has an excellent shape factor, and it is possible to obtain 1.5 times more
DIMENSIONS: mm
TEST CIRCUIT
10.0
T10.7*
M
S.S.G.
R2
SPECIFICATIONS
Part Number 3dB Bandwidth (kHz)
280 50
SFT10.7MA5
SFT10.7MS2
230 40
650 (580)
0.5 max.
62
50 (60)
SFT10.7MS3
180 40
550 (500)
0.5 max.
82
50 (60)
( ) Typical value
Input/output impedance: 330 High selectivity is achieved by replacing with SFT 10.7 Series
SFT
10.7M
A5
SERIES
RATING, CHARACTERISTICS
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. E-06-E. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P61E-4.
107
FILTERS
FEATURES
s Compact and excellent mechanical strength s Can be combined with various ICs. The IC is determined by the last number in the part number.
DIMENSIONS: mm
Color Code
8.0 1 .0 10.7G M 1 0. .3 1 5.0 1 .0 0.6 0. 1 5.0 0.2 3.0 1.0 0.3 0. 1 5.0 1 .0
DISCRIMINATORS
Part Number Demodulation Output (mV) at f0
25 min.
CDA10.7
Distortion Factor (%) max. at f0
1.0 (0.1)
Detection System
IC
CX20029
CDA10.7MG1-A
Quadrature CX20111
CDA10.7MG16-A CDA10.7MG48-A
Quadrature Quadrature
CDA10.7MC1-A
35 min.
1.0 (0.2)
242 (370)
Quadrature CX20091
Indicates frequency 4.5, 5.5, 5.74, 6.0, 6.5 MHz are available.
Note that part numbers, circuits and ratings vary according to the IC used at detector process.
) Typical value
SERIES
TYPE
FREQUENCY RANK
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P61E-4.
108
FEATURES
s The discriminator is only 1.5mm thick so it is well suited for thin circuit boards. s This discriminator can be used with a variety of ICs. s It exhibits demodulation characteristics over a wide frequency range without the need for adjustment. s The series has excellent temperature characteristics and good aging stability.
DIMENSIONS: mm
NEW CDACV10.7 SERIES
3.4 0.5 1.5 0.3
* * *
0.9 0.3 0.9 0.3
2.6 0.3
SPECIFICATIONS
Part Number
CDACV10.7MG1-A
55
1.0
f0 150
CDACV10.7MG16-A
60
0.9
f0 300
CDACV10.7MG46-A
30% Dev.
280
1.5
f0 330
SERIES
CENTER FREQUENCY
TYPE
SPECIFIC CHARACTERISTIC
FREQUENCY RANK
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P61E-4.
109
FILTERS
DIMENSIONS: mm
NEW
SFECV10.7MA5/MS2/MS3
1.0 6.9 2.9 1.0 * * 1.0 1.0 3.95 6.9 1.0 1.2 1.0 INPUT GROUND OUTPUT Packaging Units: 2000pcs/reel (180 mmD) 1.5 1.0 1.0
SPECIFICATIONS
Part Number 3dB Pass Bandwidth (kHz)
280 50
SFECV10.7MA5-Z
SFECV10.7MS2-Z
230 50
510
3.5 2.0
35
SFECV10.7MS3-Z
180 40
470
4.0 2.0
35
SFECV
10.7M
A5
SERIES
RATING, CHARACTERISTICS
Applicable in North American market only Applicable in European market only For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P61E-4.
110
FEATURES
s The filters are mountable by automatic placers. s The filters can be reflow soldered. s They are slim, at only 3.0mm maximum thickness, and have a small mounting area (11.5 x 7.5mm2) enable flexible PCB design.
DIMENSIONS: mm
CFWC455/ NEW CFZC455
6.5
ZC2
M
7.5 max.
Input Marking Sealing 1.2 0.1 1.2 0.1 3.0 max. 3.0 5.5 11.5 3.0 INPUT OUTPUT GROUND Body color: Cream Tol. without notice: 0.3mm
SPECIFICATIONS
Part Number Nominal Center Frequency (f0) (kHz)
455
Stop Band Attenuation Spurious Response Insertion G.D.T. Input/ Loss Ripple Ripple Output at f0 at f0 within f0 within f0 within within 16kHz 25kHz 40 50kHz 100kHz 0.11MHz 555675kHz (at f0 ) (dB) Deviation Impedance ( sec.) (k ) (dB) min. (dB) min. (dB) min. (dB) min. (dB) min. (dB) min. (dB) max.
30 55 55 40 20 8.5 (10.5kHz) (10.5kHz) 0.5 max. 20 max. 1.0
CFZC455CZ
CFZC455CZ2
455
9.0 to 11.5
6.5
40
55
53
20
8.5
(9kHz) 20 max.
1.0
CFWC455CZ
455
10.5 to 13.0
30
55
50
40
20
6.0
1.0
CFWC455CZ2
455
9.0 to 11.5
6.5
40
55
50
20
6.0
(9kHz) 27 max.
1.0
Note: For tape and reel packaging, the suffix is TC. For example, CFWC455CZTC.
SERIES
3dB BANDWIDTH
TYPE
Applicable in North American market only Applicable in European market only For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8.
111
FILTERS
FEATURES
s Low profile, high selectivity s Easily mountable on any PC board.
DIMENSIONS: mm
CIRCUIT
11.0 0.5 7.5 0.5 7 0.5 .0 5 1.5 max. S.S.G. Rg R1 1 2 3 Attenuation (dB) 4 R2 RF Voltmeter Rg+R1=R2=Input & Output Impedance 1 4.3 1=INPUT 2,3,4=GROUND 5=OUTPUT 0 CFWS 10 455B 20 CFWS 30 455E 40 50 60 70 CFWS 455H
CHARACTERISTICS
420
2.0
500
SPECIFICATIONS
Part Number
CFWS455B CFWS455C CFWS455D CFWS455E CFWS455F CFWS455G
Input/Output Impedance ( )
1500 1500 1500 1500 2000 2000 2000 2000
CFWS455HT CFWS455IT
Note: For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
SERIES
Available as standard through authorized Murata Electronics Distributors.
BANDWIDTH
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8 and P10E-2.
112
FEATURES
s High selectivity
DIMENSIONS: mm
CIRCUIT
8.0 0.5 7 0.5 .0 R1 8.0 0.5 0.8 0.1 4.0 0.5 0.2 0.8 0.3 Sealing 0.6 0.1 2.7 0.3 0.8 2 1 4.3 0.3 3 3-1.0D. 3.3 0.5 1.2 0.5 1.5 max. S.S.G. Rg 1 3 Attenuation (dB) 2 R2 RF Voltmeter 0 CFU 10 455B2 20 30 40 50 60 70 420 440 460 480 500 Frequency (kHz)
CFU 455E2 CFU 455H2
CHARACTERISTICS
2.7 2 1 3
SPECIFICATIONS
Part Number
CFU455B2 CFU455C2 CFU455D2 CFU455E2 CFU455F2 CFU455G2 CFU455H2 CFU455I2
CFU 455kHz
6dB Bandwidth (kHz) min.
15 12.5 10 7.5 6 4.5 3 2 3 2
Input/Output Impedance ( )
1500 1500 1500 1500 2000 2000 2000 2000 2000 2000
CFU455HT CFU455IT
Note: For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
CFU
455
SERIES
FREQUENCY in kHz
BANDWIDTH
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8.
113
FILTERS
FEATURES
s Mountable by automatic placers s Can be reflow soldered and can withstand washing s 4.0mm maximum thickness, with small mounting area (7.5 x 6.0mm2) enabling flexible PCB design s Bandwidth range from D to G
DIMENSIONS: mm
CFUCG SERIES
6.5
CFUCG X SERIES
7.5 max. 6.5
SFGCG SERIES
7.5 max. 6.5
E
M
XG
M
E
M
7.5 max.
1.0 0.1
1.0 0.1
1.0 0.1
1.0 0.1
1.0 0.1
1.0 0.1
Connection
4.0 max. 1.0 4.0 6.0 1.0 Sealing
Connection
4.0 max. 1.0 4.0 6.0 1.0 Sealing
Connection
4.0 max. 1.0 4.0 6.0 1.0 Sealing
SPECIFICATIONS
Part Number Center Frequency (Center of 6dB B.W.) (kHz) 6dB Bandwidth (kHz min.) 40dB Bandwidth (kHz max.)
20 15 12.5 10 17.5 15.0 12.5 10.0 40 35 30 25 20
Stop Band Insertion Loss Attenuation at minimum (455 100kHz) loss point (dB min.) (dB max.)
27 27 27 25 27 27 25 25 25 25 25 23 23 4 6 6 6 6 6 6 7 4 5 6 7 8
Input/Output Impedance ( )
1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 1000 1500 1500
CFUCG Series CFUCG455D 455 1.5 10 CFUCG455E 455 1.5 7.5 CFUCG455F 455 1.5 6.0 CFUCG455G 455 1.0 4.5 CFUCG X Series (Narrow Bandwidth G.D.T. Flat Type) CFUCG455EX 455 1.5 7.5 CFUCG455FX 455 1.0 6.0 CFUCG455GX 455 1.0 4.5 CFUCG455HX 455 1.0 3.0 SFGCG Series SFGCG455AX 455 2.0 17.5 SFGCG455BX 455 1.5 15 SFGCG455CX 455 1.5 12.5 SFGCG455DX 455 1.0 10 SFGCG455EX 455 1.0 7.5
(7kHz) 2.0 (5kHz) 1.5 (4kHz) 1.5 (3kHz) 1.5 (5kHz) 1.0 (4kHz) 1.0 (3kHz) 1.0 (2kHz) 1.0 (12kHz) 1.0 (10kHz) 1.0 (8kHz) 1.0 (7kHz) 1.0 (5kHz) 1.0
Note: For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
SERIES
BANDWIDTH
TYPE
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8.
114
FEATURES
s The filters are mountable by automatic placers s They are slim, at only 1.5mm thickness, and have a small mounting area (6.9 x 2.9mm2) enabling flexible PCB design. s Operating temperature range: 10C to +60C
DIMENSIONS: mm
6.9 0.3 2.9 0.3 1.0 0.5 1.5 0.2
SPECIFICATIONS
Stopband Attenuation Part Number 2dB Bandwidth
13.00 90MHz min.
Spurious Ripple
Fn 400kHz
25dB min.
Input/Output Impedance
330
CFECV13.0ME21
(10.8MHz available)
1.0dB max.
CFECV
13.0M
E21
SERIES
CENTER FREQUENCY
SPECIFIC CHARACTERISTICS
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, contact us.
115
FILTERS
FEATURES
s Realizes wider or narrower band characteristics not obtained by conventional ceramic filters.
DIMENSIONS: mm
MA19 SERIES
7.0
MT SERIES
7.0 7.0 5.0
MV SERIES
7.0 7.0 5.0
MFP SERIES
10.0
TEST CIRCUIT
E10.7A
M
E10.7T
M
E10.7V
M
E10.7F
7.0 5.0
M
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0 1.0
3.0 1.0
3.0 1.0
3.0 1.0
Rg + R1 = R2 = Input/Output Impedance C = 10pF (including stray capacitance and input capacitance of RF Voltmeter)
SPECIFICATIONS
Part Number
SFE10.7MA19 Wide Bandwidth Series SFE10.7MA20-A SFE10.7MA21 SFE10.7MHY-A
Input/output impedance: 330 (MA20-A, MHY-A), 470 (MA19) Center frequency 10.52MHz types of SFE10.7MHY-A is also available.
Input/output impedance: 330 (MT,MV), 600 (MFP) Spurious range of SFE10.7MFP: 10.7 1MHz.
SERIES
TYPE
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P61E-4.
116
FILTERS FOR COMMUNICATIONS EQUIPMENT RESIN MOLDED HIGHLY SELECTIVE CFUM/CFWM 450/455kHz SERIES
The CFUM and CFWM lines of ceramic filters are miniaturized versions of the CFU/CFWS lines. These ultra-miniature versions consume approximately 40% less volume while still offering the same high performance filter characteristics available with the CFU/CFWS lines. They are available in 450kHz and 455kHz versions.
DIMENSIONS: mm
CFUM
6.5 6.3 0.7 0.15 2.4 1.8 3.5 0.8 4.3 1.0 0.7 0.9 0.5 0.15 2.5 3.5
2.7
CFWM
6.5 9.5 6.3 0.7 2.8 4.3 1.0 0.7 0.5 6.5
SPECIFICATIONS
Part Number
CFUM455B CFUM455C CFUM455D CFUM455E CFUM455F CFUM455G CFUM455H CFUM455I CFWM455B CFWM455C CFWM455D CFWM455E CFWM455F CFWM455G CFWM455H CFWM455I
Input/Output Impedance ( )
1500 1500 1500 1500 2000 2000 2000 2000 1500 1500 1500 1500 2000 2000 2000 2000
CFUM455 series filters are 4-element ceramic filters and ultraminiature versions of CFU455 2 series. CFWM455 series filters are 6-element ceramic filters and ultraminiature versions of CFWS455 series.
SERIES Ultra-miniature
Available as standard through authorized Murata Electronics Distributors.
BANDWIDTH
TYPE
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8.
117
FILTERS
FILTERS FOR COMMUNICATIONS EQUIPMENT MINIATURE, G.D.T. FLAT TYPE CFUM/CFWM455 Y SERIES
Ceramic filter CFUM/CFWM455 Y Series are miniature and highperformance filters. These filters, while only 6.3mm high, are 60% the volume of conventional types (CFUS/CFWS Series). Well suited for miniaturizing the communications equipment, especially for a cellular phone. s Operating temperature range: 20C to +80C Storage temperature range: 40C to +85C s Available for 450kHz and 455kHz
FEATURES
s Miniature, flat G.D.T. characteristics s Suitable for a cellular phone s A variety of bandwidths are available.
DIMENSIONS: mm
CFUM455 Y
6.5 6.5
CFWM455 Y
9.5
6.5
0.7 0.1 5-0.15 0.05 0.5 0.1 2.5 2.7 2.8 0.9
6.3
0.7 0.1
4.3 1.0
SPECIFICATIONS
Part Number
CFUM455BY CFUM455CY CFUM455DY CFUM455EY CFUM455FY CFUM455GY
Part Number
CFWM455BY CFWM455CY CFWM455DY CFWM455EY CFWM455FY CFWM455GY
CFUM455 Y series filters are 4-element ceramic filters and miniature type of CFUS455 Y series. CFWM455 Y series filters are 6-element ceramic filters and miniature type of CFWS455 Y series.
SERIES Ultra-miniature
Available as standard through authorized Murata Electronics Distributors.
BANDWIDTH
GDT CONTROLLED
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8.
118
DIMENSIONS: mm
CFVM450/455kHz
10.5 6.3 0.7 0.15 8.3 4.3 1.75 1.9 1.9 2.6 2.6 1.2 1.9 1.9 1.1 3.5 0.5 0.15 8.6 4.3 1.1 6.3 0.7 3.5 0.5 6.5
CFZM450/455kHz
10.5 6.5
Note: For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
SPECIFICATIONS
Part Number
CFVM455B CFVM455C CFVM455D CFVM455E CFVM455E10 CFVM455F CFVM455G CFVM455H
Input/Output Impedance ( )
1000 1000 1500 1500 1500 1500 1500 1500
Part Number
CFZM455B CFZM455C CFZM455D CFZM455E CFZM455E10 CFZM455F CFZM455G CFZM455H
Input/Output Impedance ( )
1000 1000 1500 1500 1500 1500 1500 1500
SERIES
BANDWIDTH
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8.
119
FILTERS
DIMENSIONS: mm
CFM455
20.0 10.5 4.0 1.2 4 .8 Dia. 1.2 4 .8 Dia.
CFR455
4.0 16.8
7.5 20.0
4.0 7.5
Note: For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
SPECIFICATIONS
Part Number
CFM455A CFM455B CFM455C CFM455D CFM455E CFM455F CFM455G CFM455H CFM455I CFR455A CFR4558 CFR455C CFR455D CFR455E CFR455F CFR455G CFR455H CFR455I CFR455J
Bandwidth 6dB Ripple Bandwidth (dB) max. (kHz) At (kHz) min. max. (dB)
17.5 15 13 10 8 6 4 3 2 17.5 15 13 10 8 6 4 3 2 1.5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 30 25 23 20 16 12 10 7.5 5 30 25 23 20 16 12 10 7.5 5 4.5
Input/Output Impedance ( )
1000 1000 1000 1500 1500 2000 2000 2000 2000 1000 1000 1000 1500 1500 2000 2000 2000 2000 2000
60
70
SERIES
BANDWIDTH
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8.
120
FEATURES
s High selectivity s Stable operation in a wide temperature range
DIMENSIONS: mm
CFG455
9.5 max.
SERIES
CFK455
4.5 0.2 10.5 max.
SERIES
CFX455
4.2 0.1 9.5 max.
SERIES
4.5 0.2
SPECIFICATIONS
Part Number
CFG455 CFG455B CFG455C CFG455D CFG455E CFG455E10 CFG455F CFG455G CFG455H CFG455I CFG455J
Nominal Center 3dB Bandwidth 6dB Bandwidth Ripple 60dB Bandwidth Attenuation Spurious Insertion Loss Input/Output Frequency (kHz) (kHz) min. (kHz) min. (dB)max. (kHz) max. 455100kHz (dB) min. 0.1~1MHz (dB) min. (dB) max. Impedance ( )
455 455 455 455 455 455 455 455 455 455 10 9 7 5.5 5.0 4.2 15 13 10 8 7.0 6 4 3 2 1.5 3 3 3 3 3 3 3 3 3 3 25 23 20 16 12.5 12 10 7.5 5 4.5 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 4 4 4 6 6 6 6 6 6 6 1000 1000 1500 1500 1500 1500 1500 1500 2000 2000
Part Number
CFK455 CFK455B CFK455C CFK455D CFK455E CFK455E10 CFK455F CFK455G CFK455H CFK455I CFK455J CFX455 CFX455B CFX455C CFX455D CFX455E CFX455E10 CFX455F CFX455G CFX455H CFX455I CFX455J
Nominal Center 3dB Bandwidth 6dB Bandwidth Ripple 70dB Bandwidth Attenuation Spurious Insertion Loss Input/Output Frequency (kHz) (kHz) min. (kHz) min. (dB)max. (kHz) max. 455100kHz (dB) min. 0.1~1MHz (dB) min. (dB) max. Impedance ( )
455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 10 9 7 5.5 5.0 4.2 10 9 7 5.5 5.0 4.2 15 13 10 8 7.5 6 4 3 2 1.5 15 13 10 8 7.5 6 4 3 2 1.5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 25 23 20 16 12.5 12 10 7.5 5 4.5 25 23 20 16 12.5 12 10 7.5 5 4.5 80 80 80 80 80 80 80 80 80 80 70 70 70 70 70 70 70 70 70 70 50 50 50 50 50 50 50 50 50 50 40 40 40 40 40 50 50 50 50 50 4 4 4 6 6 6 6 7 8 8 4 4 4 6 6 6 6 7 8 8 1000 1000 1500 1500 1500 2000 2000 2000 2000 2000 1000 1000 1500 1500 1500 1500 1500 1500 2000 2000
455
CENTER FREQUENCY in kHz
B
3dB BANDWIDTH
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, consult us. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8.
121
FILTERS
DIMENSIONS: mm
CFJ455K
23.5 10.5 4.0 1.2 4 .8 Dia. 4 .8 Dia. 1.5
CFS455
CFL455G
4.0
7.5 14.2
4.2 7.4
Note: For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
SPECIFICATIONS
Part Number
CFJ455K5 CFJ455K14 CFJ455K8 CFS455A CFS455B CFS455C CFS455D CFS455E CFS455F CFS455G CFS455H CFS455I CFS455J CFL455BG5 CFL455CG1 CFL455DG2 CFL455EG1
Bandwidth Nominal Center 3dB 6dB Ripple Frequency Bandwidth Bandwidth (dB) max. (kHz) At (kHz) (kHz) min. (kHz) min. max. (dB)
455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 13 10 9 7 5.5 4.2 10.5 9.5 7.0 5.0 2.4 (Total) 1.1 ~ 1.3 1.0 (Total) 17.5 15 13 10 8 6 4 3 2 1.5 13.5 12.0 9.0 7.0 2 2 1.5 3 3 3 3 3 3 3 3 3 3 0.5 0.5 0.5 0.5 4.5 (Total) 4.5 (Total) 3.0 (Total) 30 25 23 20 15 12 9 7.5 5 4.5 100 25.5 100 18 60
Attenuation Spurious Insertion Input/Output Group Delay 455100kHz 0.1~1MHz Loss Impedance Time Dev. (dB) min. (dB) min. (dB) max. ( ) sec. max. (kHz)
60 70 70 70 70 70 70 70 70 70 60 60 60 60 60 60 60
40 at 600 ~ 700kHz 40 at 600 ~ 700kHz
6 7 8 4 4 4 4 6 6 6 7 8 8 10 10 11 13
2000 2000 2000 1500 1500 1500 1500 1500 2000 2000 2000 2000 2000 1000 1000 1000 1500
80
60
50 50 50 50 50 50 50 50 50 50 30 30 30 30
25 35 35 30
SERIES
FREQUENCY in kHz
BANDWIDTH (CFJ)
BANDWIDTH (CFS)
BANDWIDTH (CFL)
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8.
122
DIMENSIONS: mm
CFUSY455kHz
0.3 0.1 8.0 1.5 max.
CFWSY455kHz
3.0 0.15 0.05 2.7 1.2 0.5 4.2 Sealing 0.6 0.1
0.15
7.0
7.0 0.5
3.3 0.5
SPECIFICATIONS
Part Number
CFUS455BY CFUS455CY CFUS455DY CFUS455EY CFUS455FY CFUS455GY CFWS455BY CFWS455CY CFWS455DY CFWS455EY CFWS455FY CFWS455GY
CFUS/CFWS
455
SERIES
BANDWIDTH
TYPE
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8.
123
FILTERS
2.3 0.5
1.35 0.5
1 max. .5
7.3
0.8 0. 1
0.8 0.1
DIMENSIONS: mm
CFUMT
6.5 6.3 3.5 0.8 0.7 2.4 1 .8 6.5 Sealing 4.3 1.0 Sealing 6.5 0.5 0.1 0.7 0.1 1.0 max. 0.15 0.05 0.15 0.05 3.5 2.5 2.7 2.8 0.9 4.3 0.7 1.0 0.5 0.1
CFWMT
SPECIFICATIONS
Part Number
CFUM455BY CFUM455CY CFUM455DY CFUM455EY CFUM455FY CFUM455GY
Input/Output Impedance ( )
1500 1500 1500 1500 2000 2000
Part Number
CFWM455BY CFWM455CY CFWM455DY CFWM455EY CFWM455FY CFWM455GY
Input/Output Impedance ( )
1500 1500 1500 1500 2000 2000
CFUM455Y is a miniaturized 4-element version of the conventional CFUS455Y. CFWM455Y is a miniaturized 4-element version of the conventional CFWS455Y. Note: For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
455
SERIES Ultra-miniature
BANDWIDTH
TYPE
Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8.
124
1.0 max.
FEATURES
s Small in size and light weight s Realize non-adjustment in detection circuit s High sensitivity and stability s Wide range of standard products are available for various ICs s Operating temperature range: 20C to +80C Storage temperature range: 40C to +85C
DIMENSIONS: mm
CDB455C /CDB455CL
3.5 0.3
CDBM455C /CDBM455CL
6.0 0.2 3.0 0.3
CDBM455C
6.0 0.2 3.0 0.3
CDBC455CX /CDBC455CLX
6.0 0.2 6.6 0.3 6.2 0.2 Sealing 1.5 0.3 3.1 max.
7.0 0.3
9.0 0.3
6.0 max.
6.3 max.
6.0 max.
6.3 max.
1.0 0.1
1.5 max.
3.5 0.5
0.5 0.1
0.5 0.1
3.7 0.2
0.9 0.2
5.0 0.2
Applicable Part Number: 3, 7 9, 10, , 13, 21, 24, 27, 28, 29, 30, 32, 34, 35, 40, 42
SPECIFICATIONS
Part Number/ Characteristics
CDB455C7* CDBC455CX7 CDB455C9* CDBC455CX9 CDB455CL9 CDB455CL13* CDB455C16* CDBC455CX16 CDBM455C18 CDB455C28* CDB455C29* CDBC455CX29 CDB455C34* CDBM455C36 CDBC455CLX36 CDBM455C39 CDB455C42*
Recovered Audio 3dB Bandwidth Output (from 544kHz) min. (at 455kHz)
4.0 4.0 5.0 4.0 15.0 15.0 4.0 4.0 3.0 4.0 4.0 4.0 4.0 3.5 13.0 4.0 4.0 340 60mV 350 60mV 100mV min. 120 40mV 70 20mV 110 30mV 185 40mV 175 40mV 180 40mV 40 20mV 125 30mV 100 30mV 65 20mV 100 25mV 90 30mV 85 20mV 40 15mV
IC
Application
Cordless Telephone, Communications Equipment Cordless Telephone
MC3357
NE604N
Cellular Phone, Communications Equipment Cellular Phone, Communications Equipment Cellular Phone, Cordless Telephone, Communications Equipment Cordless Telephone, Communications Equip. Pager Cordless Telephone, Communications Equipment Cordless Telephone, Communications Equip. Cordless Telephone, Cellular Phone Cordless Telephone Pager
CXA1003BM MC3372 MC3371 TA31142 NE605 MC13136 NE(SA)606, NE(SA)616 NE(SA)607/617 TK14590, TK14591
*Also available in miniature package CDBM. Applicable in North American market only. Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P05E-8.
125
FILTERS
0.5 0.2
4.2 0.2
0.9 0.2