Professional Documents
Culture Documents
Chapter 1. Introduction
The 815EPT Pro and 815EPT Pro-R (MS-6337, V5.X) ATX mainboards are high-performance computer mainboards based on Intel 815EP/815E (reserved upon request) chipsets. The MS-6337 UMB (Universal Motherboard) is optimized to support the whole series of new generation Intel Pentium III (FC-PGA/FC-PGA2) processors for high-end business/personal desktop markets. The Intel 815E chipset integrates a Display Cache SDRAM controller that supports a 32-bit 133MHz SDRAM array for enhanced integrated 3D graphics performance. It is a highly-flexible chipset which is designed to extend the basic graphics/multimedia PC platform up to the mainstream performance desktop platform. The Intel 815E/EP chipsets contain two components: the 82815EP Memory Controller Hub (MCH) and the 82801BA I/O Controller Hub 2 (ICH2). The MCH integrates a 66/100/133-MHz, P6 family system bus controller , AGP (2X/4X) discrete graphics card, 100/133-MHz SDRAM controller, and a high speed accelerated hub architecture interface for communication with the ICH2. The ICH2 integrates an UltraATA/100 controller, 2 USB host controllers with a total of 4 ports, LPC interface controller, FWH interface controller, PCI interface controller, AC97 digital link, integrated LAN controller, and a hub interface for communication with the MCH. This chapter contains the following topics: Mainboard Specifications Mainboard Layout Quick Components Guide Key Features MSI Special Features 1-2 1-4 1-6 1-7 1-8
1-1
Chapter 1
Mainboard Specifications
CPU ! Support Socket370 for the whole series of new generation Intel Pentium III(FC-PGA/FC-PGA2) processors. ! Support 500MHz, 550MHz, 600MHz, 633MHz, 667MHz, 700MHz, 733MHz, 800MHz, 866MHz, 933MHz, 1GHz, 1.1GHz, 1.13GHz and up to 1.2GHz. Chipset ! Intel 815E chipset (reserved upon request/with VGA port) or Intel 815EP chipset (standard/without VGA port) - 544 BGA - AGP 4x/2x universal slot - Support 66/100/133MHz FSB ! Intel ICH2 chipset. - AC97 Audio support - 2 full IDE channels, up to ATA100 - Low pin count interface for SIO - 2 USB host controllers/4 USB ports Main Memory ! Support four 168-pin DIMM sockets. ! Support a maximum memory size of 256MB or 512MB SDRAM. Slots ! One CNR (Communication Network Riser). ! One AGP (Accelerated Graphics Port) 2x/4x slot (One AGP Pro slot for 815EPT Pro-R) ! Six PCI 2.2 32-bit Master PCI Bus slots. All PCI slots can be used as master. ! Support 3.3v/5v PCI bus Interface. On-Board IDE ! An IDE controller on the ICH2 chipset provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA 66/100 operation modes. ! Can connect up to four IDE devices. ! ATA RAID 0.1 supported by Promise PDC20265R.
1-2
Introduction
On-Board Peripherals ! On-Board Peripherals include: - 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes. - 2 serial ports (COM1/COM2) - 1 parallel port supports SPP/EPP/ECP mode - 4 USB ports (Rear * 2 / Front * 2)
Audio ! ICH2 chip integrated ! Support 2 Channel Audio or 4 Channel Audio (for 815EPT Pro-R) BIOS ! The mainboard BIOS provides Plug & Play BIOS which detects the peripheral devices and expansion cards of the board automatically. ! The mainboard provides a Desktop Management Interface(DMI) function which records your mainboard specifications. Dimension ! ATX Form Factor Mounting ! 6 mounting holes.
1-3
Chapter 1
Mainboard Layout
CPUFAN
PSFAN
SOCKET 370
DIMM 1
DIMM 2
DIMM 3
Top : Parallel Port Bottom: COM 1 COM 2 (or VGA port /reserved)
COM B (reserved)
J2
LED 5
DIMM 4
FDD
GL620USB-A
SW1
MODEM_IN
AGP Slot
PCI Slot 1
AC'97 Codec
PCI Slot 2
BATT +
PCI Slot 3
SYSFAN
LED 1
LED LED 2 3
J14
PCI Slot 5
FWH
Promise PDC20265R
LE D 4
JWOL1
JFP1
CNR
1-4
J7
JBAT2
PCI Slot 6
JMDM1
JUSB1
PCI Slot 4
ICH 2
IDE 2
IDE 1
Introduction
PSFAN
SOCKET 370
DIMM 1
DIMM 2
DIMM 3
Top : Parallel Port Bottom: COM 1 COM 2 (or VGA port /reserved)
COM B (reserved)
MODEM_IN
PCI Slot 1
AC'97 Codec
PCI Slot 2
BATT +
PCI Slot 3
SYSFAN GL620USB-A
LED 1
LED LED 2 3
J14
Promise PDC20265R
LE D 4
FWH
JWOL1
JFP1
CNR
1-5
J7
JBAT2
PCI Slot 6
IDE 3
JMDM1
J10
PCI Slot 5
IDE 4
JUSB1
PCI Slot 4
ICH 2
IDE 2
IDE 1
JWR2
J2
LED 5
DIMM 4
FDD
SW1
CPUFAN
Chapter 1
1-6
Introduction
Key Features ! ! ! ! ! ! ! ! ! ! ! ! !
ATX Form Factor CPU: Socket370 for the whole series of new generation Intel Pentium III(FC-PGA/FC-PGA2) processors Memory: four 168-pin DIMM sockets/maximum memory size of 256MB or 512MB SDRAM Slot: 1 AGP/AGP PRO slot, 1 CNR slot, 6 PCI slots I/O: 2 serial ports, 1 parallel port, 4 USB ports, 1 floppy port, 3 Audio/1 Game port USB Interface: USB 1.1 PC to PC Networking 2 IDE RAID connectors (Optional) Fuzzy Logic III overclocking utility D-LED - 4 LEDs embedded in the mainboard PC Alert III system hardware monitor Audio: 2 Channel S/W audio integrated or optional 4 Channel Audio (for 815EPT Pro-R) LAN Wake up Function Modem (External/Internal) Ring Wake up Function
1-7
Chapter 1
Note: Items shown on PC Alert III vary depending on your systems status.
1-8
Introduction
Features: ! Network Management - Monitoring & remote control ! Basic System Utilities - Scandisk & Defragment to maintain your HDD ! 3D Graphics Design - Enables a more friendly user interface ! Sofware Utilities - SoftCooler Optimized Cooling
1-9
Chapter 1
T.O.P Tech
The T.O.P TechTM is a extended sensing device that can 100% accurately detect the CPUs temeprature. You can find out the temperature on BIOS setup menu. The PC AlertTM also provides the information.
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
1-10
Introduction
Fuzzy LogicIII
The Fuzzy Logic III utility allows users to overclock the CPU FSB (Front Side Bus) frequency in the Windows environment. Select the CPU frequency you prefer and click Go to apply the frequency or click Save allowing the system to run at the specified frequency each time when the system is powered on.
Features: ! Display Current System Status - CPU Fan - CPU Temp. - Vcore - Vio - Memory Clock - CPU Clock - AGP Clock - PCI Clock ! Adjust CPU FSB Frequency
1-11
Chapter 1
Red
D-LED
Green
D-Bracket Description
System Power ON
Diagnostic LED
!"
!"
- The D-LED will hang here if the processor is damaged or not installed properly. Early Chipset Initialization
Memory Detection Test - Testing onboard memory size. The D-LED will hang if
the memory module is damaged or not installed properly. Decompressing BIOS image to RAM for fast booting.
Testing VGA BIOS - This will start writing VGA sign-on message to the screen.
1-12
Introduction
D-LED
D-Bracket
Description
Processor Initialization - This will show information regarding the processor (like brand name, system bus, etc) Testing RTC (Real Time Clock)
!"
!"
Initializing Video Interface - This will start detecting CPU clock, checking type of video onboard. Then, detect and initialize the video adapter.
BIOS Sign On - This will start showing information about logo, processor brand name, etc.
Testing Base and Extended Memory - Testing base memory from 240K to 640K and extended memory above 1MB using various patterns. Assign Resources to all ISA.
Initializing Hard Drive Controller - This will initialize IDE drive and controller. Initializing Floppy Drive Controller - This will initializing Floppy Drive and controller. Boot Attempt - This will set low stack and boot via INT 19h. Operating System Booting
1-13