Professional Documents
Culture Documents
Windows®, Linux® and Mac OS X. The HI-TECH PICC-Lite compiler is the same in
every respect as the full HI-TECH PICC compiler, except that it has support for only a
limited subset of processors, there are some limitations on the amount of memory that
can be used and source code for the standard libraries is not provided. The supported
processors and their limitations (if any) are shown below. Due to program memory
constraints, support for printing floating-point and long data types via printf family
Most Nokia phones have F-Bus and M-Bus connections that can be used to
connect a phone to a PC or in our case a microcontroller. The connection can be used for
controlling just about all functions of the phone, as well as uploading new firmware etc.
Also this bus will allow us to send and receive SMS messages.
The MBUS method uses only a single pin. It is a half-duplex method used also in
older Nokia phones. With MBUS it is possible to interface with almost all Nokia mobile
phones for service and adjustment purposes. The FBUS is a newer solution and offers
high-speed full-duplex communications link between the phone and the computer. The
service and adjustment operations, which are traditionally made over MBUS, are
FIND REFERENCE!
packs Microchip's powerful PIC® architecture into an 40- or 44-pin package and is
PIC16F877 features 256 bytes of EEPROM data memory, self programming, an ICD, 8
3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™)
bus and a Universal Asynchronous Receiver Transmitter (USART). All of these features
make it ideal for more advanced level A/D applications in automotive, industrial,
instruction set, PicBasic Pro which features an enhanced instruction set compatible with
the BASIC Stamp 2 and the CCS C Compiler which gives developers the capability to
quickly produce very efficient code from an easily maintainable high level language.
RS-232
two versions. The first version makes use of only three of the defined
transmission circuits, Data-In, Data-Out and Signal Ground. This
cable consists of only three wires with the connector on one end
RS-422
The RS-422 standard is implemented by HP in a five pin version. The connecting cable is
composed of one twisted pair of wires for Data-In, one twisted pair of wires for Data-
Out, and a single wire for Signal Ground. Devices can be connected via this interface at
distances up to 1,500 meters (4,000 feet). The coaxial cable used for the Local Area
Network complies with the 802.3 standard developed by the Institute of Electrical and