Professional Documents
Culture Documents
The organizing committee of the International Engineering Mechanics Contest for university undergraduate students would like to inform that the Contest will take place in April 20-23, 2009 at the Belarusian State University of Transport (Gomel, Belarus). The programme is enclosed. A group of three-six students of first-fourth year of education and one supervisor are invited to participate in the Contest. Other students can participate in the individual events. The students of fifth-sixth year of education can participate in the Contest hors concours. Within the programme of the Contest the seminar on scientific and methodical questions of mechanics will be organized. The seminar proceedings are planned to be published. There is no organizational fee payment. Hotel accommodation will be provided for foreign participants of the Contest. Hotel accommodation and catering are at the expense of the participants. Please, contact the Organizing Committee till March 20 by phone or E-mail to confirm your participation in the Contest. You can find the tasks of the previous contests on the web-sites http://theor-mech.by.ru/index.html http://www.belsut.gomel.by/Fak/MEH/kafedri/termeh/olimp/ Contact: Department of Technical Physics and Theoretical Mechanics, St. Kirov, 34, Gomel, 246653 Belarus. Phones: (+375232) 952951, (+37529) 8311429, (+37544) 7611429. E-mail: theor-mech yandex.ru shim server.by
Chairman of Organizing Committee of the International Engineering Mechanics Contest The University Rector V. I. Senko
Problem S22007 (6 points) Cube 1 of weight G1 and edge length a is put on homogeneous cores 2 and 3 hinged together at C, as shown in figure. Rods each of weight G2 stand on a smooth horizontal floor. AC = = = CD = = = l. The system is kept in equilibrium with the help of spring KL connecting the middle of pieces AC and . Determine the force of the spring tension.
Problem K12007 (6 points) There is slider crank mechanism with OA = AB. Crank OA rotates with angular velocity . Its position determined by a angle . Find the size and a direction of angular acceleration of crank OA, when vectors of speed and acceleration of the center point M of the connecting rod AB of the slider crank mechanism are mutually perpendicular. Problem K22007 (8 points) Crank 1 rotates with angular velocity 1. Point B is the center of the connecting rod AC. OA = l (Fig.). Determine the velocities and accelerations of the sliders 2 and 3 in relation to a crank for this position.
Problem D12007 (5 points) Initially a particle of mass m = 1 kg is in position A; its velocity is v0 = 10 m/sec and it is directed to the point B along an inclined plane. Force F changes in accordance with the law F = 20 t . Neglecting friction, determine rising height H of the particle through t = 2 sec, if = 30. Problem D22007 (6 points) The wheel presents a homogeneous disk with mass m and radius r. The axiss C acceleration is connected to the velocity by . Initially the velocity of the axis is v0. The dependence wheel rolls without sliding. Determine force expression P(t) which acting on wheel. Problem D32007 (7 points) The load 1 with mass m1 = m is on the rough surface inclined at angle = 45 to the horizontal (coefficient of friction f = 0,25). Unstretched cord passes over the pulley 2 mass m2 = m. The pulley 2 is homogeneous circular cylinder. Other end of the cord is wound on a drum and makes the wheel 3 roll without sliding on a horizontal surface. There radiuses are , mass m3 = 1,5m and radius of gyration about horizontal axis, passing through the wheel center .
Determine the velocity of the load 1 to the time when it will pass on the inclined plane distance s, if cord is at the angle = 30 to the horizontal this time. Initially the system was in equilibrium. Problem D42007 (8 points) Loads 2 and 3 with m2 = 2m, m3 = m connected to a rod 1 of length l and mass m1 = m. Inextensible string passing over the pulley 4 of the mass m4 = 2m. String connects center of gravity of the rod 1 and wheel 5 with radius r. The wheel rolls without sliding on the inclined plane at angle = 30 to the horizontal. The wheels 4 and 5 are homogeneous cylinders. Initially the system was in equilibrium and objects 1 and 5 have equal angular acceleration. At that time cos = 0,8. Determine mass of the wheel 5.