Professional Documents
Culture Documents
Service stations for outdoor and indoor use, to suit any requirement.
Tailored safety.
Attractive. Robust. High IP grade.
The ideal energy distribution station for: Industry Workshops Assembly halls Loading ramps Work yards Parks Public places Schools Food industry Production halls in fact anywhere in modern architecture.
Stainless steel surface mounted receptacle combinations A pleasing appearance is coupled with exacting design details. Wherever reliable protection from unauthorised access to receptacles together with an appealing design is needed, no matter whether the consumer is plugged in or not, MENNEKES stainless steel surface mounted combinations are the products to choose.
Column made from flat finished stainless steel available for enclosure sizes 530 x 400 x 0 mm and 700 x 530 x 350 mm. Detachable back panel for convenient installation.
Weather shield made from flat finished stainless steel available for all three enclosure sizes.
Lockabel doors Doors fitted with half cylinder lock. May be integrated into existing locking systems.
The ideal energy and water supply distributor for: Theatres Cinemas Sports stadiums and arenas Department stores Shopping centres Administrative buildings Service stations Office buildings and wherever functional yet appealing concepts are needed. 4
Stainless steel flush mounted receptacle combinations MENNEKES stainless steel distributors suit both modern and classical architecture. IP 43 to IP 44 with closed door. Made from VA stainless (material .430) or V4A (material .404), flat finished (K40).
Integrated energy.
Convenient installation Empty flush mounted enclosure with five or six cable entries. Clean mounting on the wall using adjustable trim frames.
Lockable doors Doors fitted with half cylinder lock. May be integrated into existing locking systems.
Cable guard The distributors may be locked even when in use. The cable guard aperture is sufficiently dimensioned for leading through cables.
Water connection As an option, a frost-proof tap is available for the flush mounted enclosure, part no. 843.
Energy posts the right solution for just about every application.
The rugged energy station for: Markets and fairgrounds Parks and greens Harbours Sports stadiums and arenas Theme parks Public places Schoolyards and wherever rugged and secure energy distribution is important.
MENNEKES energy posts Safe arrangement for energy supply and at the same time a means of roping off. Available in various sizes. Appliances in protection classes IP 44 or IP 7. Special colours according to the RAL colour chart upon request.
Lockable doors The doors are lockable using a half cylinder lock. Energy can be drawn with the door open or closed (for safety reasons).
Stable installation The posts are complete with a frame with four sufficiently large apertures to enable it to be fixed on existing or new foundations.
If the ground underneath is properly prepared, the posts are virtually rock-solid.
Available in 3 sizes 050 x 0 mm, 050 x 73 mm and 400 x 35 mm.
Power. Compressed
sizes. colours. A full range of possibilities.
The ideal energy station for: Industry Workshops Assembly halls Loading ramps Work yards Food industry Production halls and wherever a secure energy supply is required despite harsh conditions.
With CombiTOWER all the required energy connections are available right at the workplace. This saves time as appliances and machines are swiftly put into their operating condition and installation times are reduced. There is no need for long supply cables safe receptacles are located right next to the workplace.
air. Water.
In the standard version MENNEKES CombiTOWER is available in sizes (043 x 54 x 4 mm or 005 x 80 x 00 mm), either with a signal yellow or a bright stainless steel finish.
It is suitable for combinations with receptacles ranging from A to 3A or for single receptacles from A to 5A.
Individually designed equipment to suit your particular requirements is possible. Up to two compressed air or water connections can be installed in a CombiTOWER.
Furthermore, special RAL colours and designs with a hinged, lockable front cover are availabe on request.
Stainless steel weather shields for walls or on columns A secure energy supply in virtually any place of application.
Outdoor electrical appliances are exposed to various adverse weather conditions and UV radiation. The use of different electrical appliances calls for different receptacles, which are available in the form of handy complete combinations.
0
its needed.
Individual choice The modular weather shield and column system enables individual selection of wall mounted or standing installations.
Material From VA stainless steel (material .430), surface finish: bright stainless steel.
Equipment Select from our large range of receptacle combinations or from our single receptacles.
Weather shields For installation on a column or for wall mounting with customised fixing possibilities (see pages 8/).
MENNEKES surface mounted receptacle combinations in stainless steel, for wall mounting or on columns
VA stainless steel enclosure (material .430), surface with a flat finish (K40), protection class IP 44 with a closed door.
Surface mounted receptacle combinations from flat finished stainless steel Dim. (H x W x D): 530 x 400 x 0 mm, standard door stop on the right, front door with swing handle and half cylinder lock lockable even when plugs are connected. Cable entry / connection options: M 3 entry nipples at bottom, M brass screw plugs at bottom, terminal (shock hazard protected to BGV A) for cables up to 5 x 5 mm. CEE receptacle 3A, 5p, 400V MCB 3A, 3p, C, CEE receptacle A, 5p, 400V MCB A, 3p, C, SCHUKO receptacles A, 30V MCBs A, p, B RCD 3A, 4p, IN = 0.03A Part no. 83744 (illustration on the left)
Surface mounted receptacle combinations from flat finished stainless steel Dim. (H x W x D): 700 x 530 x 350 mm, standard door stop on the right, front door with swing handle and half cylinder lock lockable even when plugs are connected. cable entry bushes at bottom, suitable for cable diameters from 3 to 4 mm M brass screw plugs at bottom, M 0 brass screw plug at bottom, terminal (shock hazard protected to BGV A) for cables up to 5 x 50 mm.
CEE receptacle 5A, 5p, 400V safety glass circuit breaker NH00/3p with safety fuses 5A CEE receptacle 3A, 5p, 400V MCB 3A, 3p, C CEE receptacle 3A, 5p, 400V MCB 3A, 3p, C CEE receptacle A, 5p, 400V MCB A, 3p, C 3 SCHUKO receptacles A, 30V 3 MCBs A, p, B Back-up fuses: Neozed D 0, 3p (E 8) with two safety fuses 3A RCDs 3A, 4p, IN = 0.03A Part no. 83704
Surface mounted receptacle combinations from flat finished stainless steel Dim. (H x W x D): 700 x 300 x 30 mm, standard door stop on the right, front door with swing handle and half cylinder lock lockable even when plugs are connected. cable entry bushes at bottom, suitable for cable diameters from 3 to 4 mm M 0 brass screw plug at bottom, terminal (shock hazard protected to BGV A) for cables up to 5 x 5 mm.
CEE receptacle 3A, 5p, 400V CEE receptacle 3A, 5p, 400V MCB 3A, 3p, C CEE receptacle A, 5p, 400V MCB A, 3p, C 4 SCHUKO receptacles A, 30V MCBs A, p, B RCD 3A, 4p, IN = 0.03A Part no. 83698
Each surface mounted stainless steel receptacle combination comes with set (4 pcs.) of fixing straps in a bag.
CEE receptacle A, 5p, 400V MCB A, 3p, C 4 SCHUKO receptacles A, 30V 4 MCBs A, p, B 40A, 4p, IN = 0.03A RCD Part no. 83725 (illustration on the left)
Accessories Empty surface mounted enclosure from flat finished stainless steel Dimensions: 530 x 400 x 0 mm Part no. 18422 Column Flat finished stainless steel Dimensions (H x W): 00 x 400 mm Part no. 18424 Galvanised base Part no. 18416 Weather shield Flat finished stainless steel Part no. 15586
CEE receptacle 3A, 5p, 400V MCB 3A, 3p, C CEE receptacles 3A, 5p, 400V MCBs 3A, 3p, C CEE receptacles A, 5p, 400V MCBs A, 3p, C 3 SCHUKO receptacles A, 30V 3 MCBs A, p, B Back-up fuses: Neozed D 0, 3p (E 8) with two safety fuses 3A RCDs 3A, 4p, IN = 0.03A Part no. 83705
CEE receptacle 3A, 5p, 400V MCB 3A, 3p, C CEE receptacle 3A, 5p, 400V MCB 3A, 3p, C CEE receptacle A, 5p, 400V MCB A, 3p, C 4 SCHUKO receptacles A, 30V 4 MCBs A, p, B Back-up fuses: Neozed D 0, 3p (E 8) with two safety fuses 3A RCDs 3A, 4p, IN = 0.03A Part no. 83706
Accessories Empty surface mounted enclosure from flat finished stainless steel Dimensions: 700 x 530 x 350 mm Part no. 18423 Column Flat finished stainless steel Dimensions (H x W): 830 x 330 mm Part no. 18426 Galvanised base Part no. 15577 Weather shield Flat finished stainless steel Part no. 15575
Accessories Empty surface mounted enclosure from flat finished stainless steel Dimensions: 700 x 300 x 30 mm Part no. 18433 Galvanised base Part no. 18442 Weather shield Flat finished stainless steel Part no. 18438
Weather shield from flat finished stainless steel, available for the three sizes of enclosure shown on this page. Column Flat finished stainless steel detachable back panel for easy assembly C-profile rail on the inside for cord grip clamps Cord grip clamps not included in the scope of supply. (Columns available only for the enclosure sizes 530 x 400 x 0 mm and 700 x 530 x 350 mm)
3
CEE receptacle 3A, 5p, 400V MCB 3A, 3p, C CEE receptacle A, 5p, 400V MCB A, 3p, C SCHUKO receptacles A, 30V MCBs A, p, B RCD 3A, 4p, IN = 0.03A for two cables of up to 5 x 5 mm Part no. 84374
Empty enclosure Empty flush mounted enclosure stainless steel Dim. (H x W x D): 50 x 30 x 00 mm with front door and trim frame from flat finished stainless steel Dimensions (H x W): 580 x 40 mm Part no. 18427 Galvanised base Part no. 18416
4
MENNEKES stainless steel flush mounted receptacle combinations for power cables and water hoses
Trim frame and flush mounted enclosure V4A stainless steel (material .4404), flat finished (K40), protection class IP 44 with closed door.
Flush mounted combination for power cables and water hoses made up of: Front door and trim frame Flat finished stainless steel Dimensions (H x W): 53 x 308 mm front door, lockable with half cylinder, lockable even when plugs or hoses are connected, door stop on the right Flush mounted stainless steel enclosure, flat finished Dim. (H x W x D): 485 x 5 x 30 mm cable entry bush x at top, suitable for cable diameters up to 5 mm ( cable entries at top left and top right each to be cut out), pivoting mounting angle, predrilled to accommodate optionally: double Cepex receptacle product group 07 (CEE A or SCHUKO), single wall mounted Cepex receptacles (CEE receptacle A or SCHUKO) combination enclosure 70 x 8 mm Accommodation for /2 frost-proof outdoor fitting (ref. no. 8440) Part no. 18432
Important note: According to VDE regulations, the above stainless steel combination for power cables and water hoses must be protected by an RCD (0.03A)
Receptacle mounting plate and splash guard The pivoting mounting angle and the splash guard from part of the scope of supply.
Frost-proof outdoor fitting with automatic emptying system, angled gland for /2 hoses, rated pressure: PN , flexible ND 5 connection with gland, all metal parts which come into contact with liquids are made from red brass, with black plastic handle, outlet with connected collar and EPDM seal with DIN/DVGW sound insulation approval, including pipe air-release valve and check valve as safety devices to DIN EN 77 and DIN 88 (part 4), preassembled water fittings. hexagon head screws M x 0 to fasten the water fitting are enclosed as detached parts. Part no. 18440
Variations of stainless steel flush mounted combinations for power cables and water hoses.
Receptacle combination wired ready for connection, 4 SCHUKO receptacles A, 30V Part no. 98365
Cepex double receptacle CEE receptacle A, 5p, 400V SCHUKO receptacle A, 30V Part no. 4202
Cepex double receptacle CEE receptacles A, 5p, 400V Part no. 4204
5
Power post from steel tube, wall thickness 4.0 mm, hot-dip galvanised, powder-coated, colour: red, hinged supply aperture with safety lock, dimensions (H x ): 050 x 0 mm (inside) weight: approx. 45 kg Bottom cable outlet: (H x W) 50 x 40 mm Flange for ground installation: 30 mm with 4 fixing holes 5 mm, for fastening on an existing foundation. Equipment: CEE receptacle A, 5p, 400V MCB A, 3p, C SCHUKO receptacles A, 30V MCB p, B Cable entry: x M 5 at top open, for cable up to 5 x mm Part no. 84335
Power post from steel tube, wall thickness 4.5 mm, electroplated, yellow chromated and powder-coated, colour: anthracite (RAL 70), hinged supply aperture with half cylinder lock, dimensions (H x ): 050 x 73 mm weight: approx. 0 kg Bottom cable outlet: (H x W) 0 x 70 mm Flange for ground installation: 30 mm with 4 fixing holes 5.5 mm, for fastening on an existing foundation. Equipment: CEE receptacle 3A, 5p, 400V MCB 3A, 3p, C CEE receptacle A, 5p, 400V MCB A, 3p, C SCHUKO receptacles A, 30V MCBs A, p, B RCD 40A, 4p, IN = 0.03A for all receptacles Cable entry at top: x M 3 open, x M 3 with plug, for cable up to 5 x 0 mm Part no. 83685
Power post from steel tube, wall thickness 4.5 mm, hot-dip galvanised, wet painted, colour: anthracite iron glitter DB703, hinged supply aperture with safety lock, dimensions (H x ): 400 x 35 mm (inside) weight: approx. 00 kg Bottom cable outlet: (H x W) 50 x 00 mm Flange for ground installation: 450 mm with 4 fixing holes 5 mm, for fastening on an existing foundation. Equipment: CEE receptacle 3A, 5p, 400V CEE receptacle 3A, 5p, 400V MCB 3A, 3p, C CEE receptacle A, 5p, 400V MCB A, 3p, C SCHUKO receptacles A, 30V MCBs A, p, B RCD 3A, 4p, IN = 0.03A for all receptacles Cable entry: glands M 40 at bottom glands M 40 at top for two cables up to 5 x 5 mm Part no. 83722 Empty enclosure 18502 AZ Assembly plate 15566
18503 AG 15617
MENNEKES CombiTOWER
Made from VA stainless steel (material .430), suitable for indoor and outdoor installation
CombiTOWER Stainless steel with removable cover, paintec signal yellow (RAL 003), dimensions (H x W x D): 043 x 54 x 4 mm Part no. 15679 CombiTOWER Stainless steel with removable cover, bright finish, dimensions (H x W x D): 043 x 54 x 4 mm Part no. 15678 Convenient handling. Enclosure size 043 x 54 x 4 mm: Simple installation thanks to the removable cover. The upper parts of the AMAXX enclosure, which are hinged on the side, can be easily opened.
CombiTOWER Stainless steel with removable cover and lockable door, painted signal yellow (RAL 003), dimensions (H x W x D): 043 x 54 x 45 mm Part no. 15681 CombiTOWER Stainless steel with removable cover and lockable door, bright finish, dimensions (H x W x D): 043 x 54 x 45 mm Part no. 15680
For CombiTOWER 15678, 15679, 15680, 15681: AMAXX combination enclosure size 260 x 225 mm size 390 x 225 mm size 520 x 225 mm Please see AMAXX or MENNEKES leaflet or refer to the MENNEKES main catalogue. Possibility of fixing AMAXX combinations at the back; at top: M threaded bolts and nuts (to fit the combination) at bottom: M threaded holes and bolts with M 0 blind plug for compressed air port with M 8 earthing bolt For CombiTOWER 15524 and 15525 XXL combination enclosure size 520 x 260 mm Please contact us.
CombiTOWER Stainless steel with assembly plate and front plate, painted signal yellow (RAL 003), dimensions (H x W x D): 005 x 80 x 00 mm Part no. 15524 CombiTOWER Stainless steel with assembly plate and front plate, bright finish, dimensions (H x W x D): 005 x 80 x 00 mm Part no. 15525
CombiTOWER 15524, 15525: with fixing holes and M 5 thread in the mounting plate, including screws and washers with M 0 blind plug for compressed air port with M 8 earthing bolt
7
Weather shield made from stainless steel with side walls for wall mounting or on a column Dimensions (H x W x D): 8 x 54 x 80 mm surface: bright finish Part no. 15683 Dimensions (H x W x D): 48 x 54 x 50 mm surface: bright finish Part no. 15682
Shield 15683 Suitable to accommodate: AMAXX combinations enclosure size 50 x 5 mm (see main catalogue, chapter 7, or AMAXX leaflet)
Shield 15682 Suitable to accommodate: AMAXX combinations enclosure sizes 0 x 5 mm and 30 x 5 mm (see main catalogue, chapter 7, or AMAXX leaflet)
Weather shield made from stainless steel with side walls for wall mounting or on a column Dimensions (H x W x D): x 5 x 3/5 mm surface: bright finish Part no. 15542
Attention! When mounting on a pole, please order separately: Stainless steel mounting clips ( pcs. in a set) 700 mm Set: part no. 22986 00 mm Set: part no. 22987 030 mm Set: part no. 22988
8
Accessories: Column from stainless steel (material 1.4301) Surface: stainless steel, bright finish (basic column for the three shields shown on the left), height approx. 300 mm Part no. 15530
Stainless steel weather shield 15542 with side walls, not only suitable for accommodating receptacles. In the illustration on the left, you will find an example of what is possible.
Fax response
MENNEKES Elektrotechnik GmbH & Co. KG Industrial plugs and sockets Aloys-Mennekes-Strae D-573 Kirchhundem Tel. Fax E-Mail Internet +4 (0) 7 3 / 4- +4 (0) 7 3 / 4- 4 info@MENNEKES.de www.MENNEKES.de
Please tick
Please tick
Please tick
Please tick
AMAXX
Screwless connections.
For CEE plugs, connectors and recpetacles.
MENNEKES catalogue.
For advanced industrial networks: Cepex data sockets. Fibre optics technology. CEEplus.
Please tick
Please tick
Please tick
Panel-mounted receptacles and inlets with central thread. Installation with no need for tools.
Company Division / function Mr. / Mrs. Street, no. Post code / town Phone Fax E-mail
Industry: Electrical wholesaler Electrician Industrial company Planner / engineering company _______________ Number of staff: -0 -50 5-00 0-500 50-000 more than 000
For leaflets in other languages, please contact us on phone no. +4 (0) 7 3 / 4-.
More product information can be found on the inter net at: www.MENNEKES.de
38000DS05TA04.0V