Professional Documents
Culture Documents
Ductile Iron/Stainless Steel Cylinders Quarter-turn Spring Return and Double Acting Actuators Output Torques to 238,000 lb.in.
Features and Benefits
Ductile iron housing, piston and end caps provide long product life with durable, cost effective operation. Output shaft made of high strength alloy steel transmits torque without fatigue. Sintered bronze bushings or Teflon composite on output shaft eliminate side loading of valve stem to maximize stem packing performance. Chrome-plated steel piston rod provides strength and corrosion resistance for enduring high cycle applications. Sintered bronze piston rod bushings provide low-friction support and precise alignment of the piston rod to increase efficiency, reduce maintenance and extend actuator life. Heat-treated stainless steel thrust pin and rollers transfer piston force to 17-4PH stainless steel yoke by rolling to reduce friction, for longer life and more efficient torque transmission. Teflon guide bands ensure low-friction piston guidance during operation to protect cylinder walls from potential scoring and extend seal performance with a continuous cylinder wiping action. Bi-directional travel stops provide accurate valve rotation adjustment. ISO 5211 mounting pattern promotes easier valve adaptation by utilizing internationally recognized standards. Both Series B and C have been certified to SIL 3 ratings. ISO 9001
Namur drive slot on output shaft enables accessory-driven components to maintain a compact assembly and eliminates the need for couplings. Tectyl-coated springs can be disarmed without special tools to safely and easily disassemble the actuator in the field, reducing down time and providing a man safe spring. Easily removable housing cover provides effortless access for internal inspection of yoke mechanism.
Technical Data
Supply pressure Supply medium : 40 to 160 psig (see torque charts) : Air or any gas compatible with materials of construction
Series C
Temperature rating Standard range : -20F to 210F Optional range : -65F to 300F Angular rotation : 90 degrees 8 degrees
Teflon and Viton are registered trademarks of E.I. duPont de Nemours & Company
Flow Control
Total Flow Control Solutions
Morin is either a trademark or registered trademark of Tyco International Services AG or its affiliates in the United States and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Copyright 2007 Tyco Flow Control. All rights reserved. MORMC-0023-US-0705
Principles of Construction
Using high quality materials of construction and modern rugged design concepts Morin becomes the standard for low cost valve actuation while providing high quality performance. The B, C, and HP actuator housings are all machined from ductile iron castings. This produces a rugged, low cost product through reduced machining time and by eliminating wasteful excess material. Any components that rotate or slide during operation, such as the high strength output shaft, chrome-plated piston rod, stainless steel thrust pin or the ductile iron piston, are all supported by replaceable friction reducing bearings.
100
Air Stroke
100
Torque
75
75
50
Spring End Air End
Torque
50
Running Torque
25
25
45
Stroke
90
45
Stroke
90
MORMC-0023 2
Superior materials of construction offer long life, and mean less downtime Series B or C, Models 135 thru 1150
Cylinders Housing and End Caps Scotch Yoke
17-4PH Stainless Steel with 440C Roller Bearings A395 Ductile Iron Series C - Steel Xylan Coated Series B - 316 Stainless Steel
Bearings Piston
E-coated for total protection
Piston Bearing
Teflon
Note: See Morin Series B/C/S IOM for a complete bill of materials.
MORMC-0023 3
Canted
Canted Yoke design moves the torque curve to where it's needed most, gaining as much as 35% more break and reseat torque for the same size actuator. The canted yoke curve is shown in red below. Caned Yoke actuators allow selection of smaller, lighter, and less expensive actuator packages.
60
40
20
90
Symmetric Canted
MORMC-0023 4
Options
To provide the actuation package best suited for your application, the Morin line offers a full range of manual accessories.
Lockout
Integral lockout allows safe shutdowns for maintenance and isolation of systems.
AWWA
Tested per American Waterworks Association C504. Available for pneumatic or water service operation.
+ F/C
MORMC-0023 5
Mechanical Data
Actuator Model Standard End Torque Closing @ 80 psig Symmetrical Canted
600 1500 2300 3960 5000 5900 7920 10000 14175 23100 28350 36225 37000 42000 63825 77700 101115 120750 148000 193000 238000 221 525 800 1260 1600 1600 1890 2500 3500 5670 8085 10395 12637 13760 14893 15435 21131 29785 27713 32303 42263 51800 58275 62475 83300 2990 5148 6500 7670 9009 @ 70 psig 9750 @ 60 psig 18428 30030 36855 41206 @ 70 psig 51469 40950 @ 60 psig 82973 101010 98587 @ 60 psig 98110 @ 50 psig 192400 219538 @ 70 psig 232050 @ 60 psig 1120 1764 2240 2240 2646 3500 4900 7938 11319 14553 17692 19264 20850 21609 29583 41699 38798 45224 59168 72520 81585 87465 116620
Number of Pistons
1 1 1 1 1 2 2 2 1 1 2 2 1 2 1 2 2 2 2 2 2 1 1 1 1 2 2 2 2 2 1 1 2 2 2 1 2 1 2 2 2 2 2 2 2 2
Volume1 Cycle Time2 Stroke Cubic In Seconds Weight (inch) 95 Stroke 90 Stroke (lbs.)
2 2 3 3 3 3 3 3 5 5 5 5 6 5 6 6 6 6 12 12 12 2 2 3 3 3 3 3 3 3 5 5 5 5 5 6 5 6 6 6 6 6 12 12 12 12 14 35 52 78 104 130 156 215 294 412 588 706 780 825 1132 1560 1912 2263 2986 3884 4781 14 35 52 78 104 130 130 156 215 294 412 588 706 706 780 825 1132 1560 1912 1912 2263 2986 3884 3884 4781 0.5 1 1 1.5 2.2 2.4 2.5 3 4.5 5 6 7 8 8.5 9.5 10 11 12 20 22 24 0.5 1 1 1.5 2 2.3 2.4 2.5 3 4.5 5 6 7 7 8 8.5 9.5 10 11 11 12 20 22 22 24 11 14 30 33 39 36 41 49 165 185 210 234 390 257 519 530 653 775 850 950 1050 13 20 38 46 47 54 54 60 68 210 235 250 315 315 540 379 779 660 871 871 1082 1650 1750 1750 1850
Notes
1. Air Consumption: Cubic inches shown in chart represent actual free air volume in cylinder between piston and end cap when furthest apart. Air consumption will vary depending on supply pressure. To determine standard cubic feet per minute use the following formula: SCFM =
Double Acting
006 015 023 036 050 059 072 100 135 210 270 345 370 420 575 740 945 1150 1480 1930 2380 006 015 023 036 046 058 059 072 100 135 210 270 344 345 370 420 575 740 944 945 1150 1480 1929 1930 2380
(_____)(______________)(
Vol. in3 1728 Supply Air psig + 14.7 14.7
Strokes/Minute
Example: Calculate SCFM for Model 023 double acting using 80 psig air supply and 5 strokes/minute.
SCFM =
( )(
52 _____ 1728
)( )
5
SCFM = 0.97
2. Cycle times shown represent average time to stroke 90 degrees using standard pilot valves and should be used as a guide only. Cycle times can be increased or decreased dramatically by using speed controls, oversized pilot valves or quick exhaust valves.
Spring Return
How to Order
1. Double Acting (Symmetrical Yoke) example: Air supply: 80 psig Break/end torque: 23,100 lb.in. B-210U-D000 B: Series 210: Model number U: UNC mounting threads D: Double acting 000: No spring 2. Spring Return (Symmetrical Yoke) example: Air supply: 80 psig End torque: 8085 lb.in. B-210U-S080 B: Series 210: Model number U: UNC mounting threads S: Spring return 080: Spring set code 3. Double Acting (Canted Yoke) example: Air supply: 80 psig Break (CCW) torque: 31,185 lb.in. End (CW) torque: 30,030 lb.in. B-210UC-D000 B: Series 210: Model number U: UNC mounting threads C: Canted Yoke D: Double acting 000: No spring 4. For all spring return models: Use required torque to determine Spring Set Code.
All spring sets ending with 0 fail clockwise (40, 50, 60, etc.). All spring sets ending with 1 fail counterclockwise (41, 51, 61, etc.). All symmetrical yoke models between 006 and 100 may be mounted to fail clockwise or counterclockwise by flipping along the longitudinal axis.
Series B Dimensions
Models 046, 058, 059, 072 and 100
A B 1.25 Typical
C 2 (sq) C 1 (sq)
G H Diameter E
Notes
P NPT Typical
1. Shown without pointer for clarity. 2. For mounting dimensions, refer to page 10.
J F (dia) C 1 (sq) K L
G H Diameter
P NPT Typical
A
12.87 12.31 18.54 18.60 18.55 19.40 19.35 18.98
B
5.28 5.28 8.88 8.88 8.88 9.66 9.68 9.68
C1
3.18 4.81 4.81 5.81 7.12 4.81 5.81 7.12
C2
5.81 5.81 7.12
D
3.87 4.81 6.16 6.66 7.31 6.66 6.66 7.31
E
6.34 6.38 6.38
F
1.09 1.09 1.75 1.75 1.75
G
0.18 1.00 0.25 0.75 1.38 0.75 0.75 1.38
H
1.50 1.50 1.75 1.75 1.75 1.75 1.75 1.75
J
1.50 1.50 2.16 2.16 2.16 2.16 2.16 2.16
K
3.00 3.00 4.31 4.31 4.31 4.31 4.31 4.31
L
4.75 4.75 6.69 6.69 6.69 6.69 6.69 6.69
M
1.31 1.31 2.25 2.25 2.25 2.25 2.25 2.25
P
1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4
A
12.87 14.50 21.95 23.65 22.73 22.79 24.44 24.45 24.51
B
5.28 5.28 8.88 8.88 9.66 9.73 9.66 9.68 9.73
C1
3.18 4.81 4.81 5.81 4.81 5.81 4.81 5.81 7.12
C2
4.81 4.81 5.81 5.81 7.12
D
3.87 4.81 6.16 6.66 6.16 6.66 6.66 6.66 7.31
E
5.58 5.58 5.44 5.44 5.44
F
1.09 1.09 1.75 1.75
G
0.18 1.00 0.25 0.75 0.25 0.75 0.75 0.75 1.38
H
1.50 1.50 1.75 1.75 1.75 1.75 1.75 1.75 1.75
J
1.50 1.50 2.16 2.16 2.16 2.16 2.16 2.16 2.16
K
3.00 3.00 4.31 4.31 4.31 4.31 4.31 4.31 4.31
L
4.75 4.75 6.69 6.69 6.69 6.69 6.69 6.69 6.69
M
1.31 1.31 2.25 2.25 2.25 2.25 2.25 2.25 2.25
P
1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4
MORMC-0023 7
C 1 (sq)
J K C 2 (sq) C 1 (sq)
G E P NPT Typical
Notes
1. Shown without pointer for clarity. 2. For mounting dimensions, refer to pages 10 - 11.
MORMC-0023 8
C1
9.50 11.50 9.50 9.50 13.50 11.50 17.00 13.50 13.50 17.00 13.50 13.50 17.00
C2
9.50 11.50 11.50 13.50 17.00 17.00 13.50 17.00 17.00
D 10.44 11.44 10.44 11.44 16.75 11.44 18.50 16.75 18.50 18.50 21.57 22.08 22.08
G 1.00 2.00 1.00 2.00 2.69 2.00 4.44 2.69 4.44 4.44 0.63 2.19 2.19
J 4.38 4.38 4.38 4.38 5.44 4.38 5.44 5.44 5.44 5.44 7.06 7.06 7.06
K 8.13 8.13 8.13 8.13 9.50 8.13 9.50 9.50 9.50 9.50 13.38 13.38 13.38
L 11.82 11.82 11.82 11.82 14.81 11.82 14.81 14.81 14.81 14.81
M 3.19 3.19 3.19 3.19 6.88 3.19 6.88 6.88 6.88 6.88 7.58 7.58 7.58
P
3/8 1/2 3/8 1/2 1/2 1/2 3/4 1/2 3/4 3/4 1/2 3/4 3/4
Q 1.75 2.12 1.75 2.12 1.75 2.12 2.50 1.75 2.50 2.50 2.50 3.05 3.05
C1
9.50 11.50 9.50 11.50 9.50 13.50 11.50 17.00 13.50 17.00 13.50 17.00 13.50 17.00 13.50 17.00
C2
9.50 9.50 11.50 11.50 13.50 13.50 17.00 17.00 13.50 13.50 17.00 17.00
D 10.44 11.44 10.44 11.44 11.44 16.75 11.44 18.50 16.75 18.50 18.50 18.50 21.57 22.08 22.08 22.08
E 10.18 10.18 9.50 9.50 13.88 13.88 12.70 12.70 24.46 24.46 23.00 23.00
G 1.00 2.00 1.00 2.00 2.00 2.69 2.00 4.44 2.69 4.44 4.44 4.44 0.63 2.19 2.19 2.19
J 4.38 4.38 4.38 4.38 4.38 5.44 4.38 5.44 5.44 5.44 5.44 5.44 7.06 7.06 7.06 7.06
K 8.13 8.13 8.13 8.13 8.13 9.50 8.13 9.50 9.50 9.50 9.50 9.50 13.38 13.38 13.38 13.38
L 11.82 11.82 11.82 11.82 11.82 14.81 11.82 14.81 14.81 14.81 14.81 14.81
M 3.19 3.19 3.19 3.19 3.19 6.88 3.19 6.88 6.88 6.88 6.88 6.88 7.58 7.58 7.58 7.58
P
3/8 1/2 3/8 1/2 1/2 1/2 1/2 3/4 1/2 3/4 3/4 3/4 1/2 3/4 3/4 3/4
Q 1.75 2.12 1.75 2.12 2.12 1.75 2.12 2.50 1.75 2.50 2.50 2.50 2.50 3.05 3.05 3.05
MORMC-0023 9
0.68
Namur Drive Both Ends 0.251 CBore x 0.209 Deep M6 Tap x 1/2 Deep A Section A - A
Models 023 through 100 - Top and bottom of housing (symmetrical) ISO 5211-F12
0.998/0.995 square B M5 x 0.80 Tap 3/8 Deep (4) Places on Namur Pattern 1.18 x 3.149 Rectangle
1/2
0.94
Namur Drive Both Ends 0.251 CBore x 0.209 Deep M6 Tap x 1/2 Deep B Section B - B
Models 135, 210, 270, 344, 345 and 420 - Bottom of housing ISO 5211-F16
34
- 10 UNC*** Tap x 1.18 Deep (4) Places as Shown on 6.50 Diameter Bolt Circle
1.18
3.69
C Section C - C
Models 135, 210, 270, 344, 345 and 420 - Top of housing - Mounting details
3.68
SHUT
10 - 32 UNF**** Tap x 0.875 Deep (4) Places on Keystone Pattern Namur Adapter 1.61
OPEN
Model Number
006 and 015 023 thru 100 135 thru 1150 135 thru 1150
M5 x 0.80 Tap x 3/8 Deep (4) Places on Namur Pattern 1.181 x 3.149 Rectangle 0.157/0.160 wide x 0.197/0.205 Deep Namur Accessory Drive Slot
SHUT
0.998/0.995 square
1.18
MORMC-0023 10
34
- 10 UNC** Tap x 1.18 Deep (8) Places as Shown on 11.73 Diameter Bolt Circle
22.5* Typ.
D Section D - D
Models 370, 575, 740, 944, 945 and 1150 - Top of housing - Mounting details
3.68
SHUT
10 - 32 UNF**** Tap x 0.875 Deep (4) Places on Keystone Pattern Namur Adapter 1.61 0.197 0.205 0.998/0.995 square 1.18
OPEN
M5 x 0.80 Tap x 3/8 Deep (4) Places on Namur Pattern 1.181 x 5.118 Rectangle 0.157/0.160 wide x 0.197/0.205 Deep Namur Accessory Drive Slot
SHUT
Models 1480, 1929, 1930 and 2380 - Bottom of housing ISO 5211-F35
Female Drive 6.250 Dia. Bore x 11 Deep 1.501 Rectangular Keyway with 0.12 Radius Inside Keyway Corners 45 E 1 - 8 UNC*** Tap x 134 Deep (8) Places as Shown on 14.02 Diameter Bolt Circle 1.18
Section E - E
Models 1480, 1929, 1930 and 2380 - Top of housing - mounting details
Model Number
370 and 575 thru 1150 1480 and 2380 370 and 575 thru 1150
M5 x 0.80 Tap 3/8 Deep (4) Places on Namur Pattern 1.181 x 3.149 Rectangle 0.157/0.160 Wide x 0.197/0.205 Deep Namur Accessory Drive Slot
MORMC-0023 11
Also Available
The Series S Actuator (All Stainless)
316 Stainless Steel 316 Stainless Steel
Setting an unrivaled standard in actuation at a price unexpectedly low for stainless steel. To 160 psig pressure rating Double acting break torques to 238,000 lb.in. Spring end torques to 104,125 lb.in. For additional information, refer to Publication MORMC-0024.
Teflon 316 Stainless Steel Glass Filled Teflon 17-4 PH Stainless Steel 18-8 Stainless Steel
www.morinact.com www.tycoflowcontrol.com
Tyco Flow Control (TFC) provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. This data sheet is intended only as a guide to TFC products and services. Individuals using this data sheet must exercise their independent judgment in evaluating product selection and determining product appropriateness for their particular purpose and system requirements. TFC MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS. ACCORDINGLY, TFC WILL NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. Patents and Patents Pending in the U.S. and foreign countries. Tyco reserves the right to change product designs and specifications without notice.
MORMC-0023 12