Professional Documents
Culture Documents
BRKOPT-2114
BRKOPT-2114 14366_04_2008_c1
Cisco Public
Agenda
Ethernet OAM Protocol Overview
IEEE 802.3ah (clause 57) IEEE 802.1ag ITU Y.1731 MEF E-LMI
Ethernet OAM Inter-Working Ethernet OAM Fault Management In Action Ethernet Performance ManagementCisco IP SLA Summary
BRKOPT-2114 14366_04_2008_c1
Cisco Public
BRKOPT-2114 14366_04_2008_c1
Cisco Public
Operational Efficiency
Reduce OPEX, avoid truck-rolls Downtime cost
Management Complexity
Large Span Networks Multiple constituent networks belong to disparate organizations/companies
BRKOPT-2114 14366_04_2008_c1
Cisco Public
Problem Taxonomy
Fault Management
Fault Detection Fault Verification Fault Isolation Fault Recovery Fault Notification
Performance Management
Frame Loss Measurement Delay Measurement Delay Variation Measurement Availability Measurement
Configuration Management
Service Provisioning
BRKOPT-2114 14366_04_2008_c1
Cisco Public
Ethernet OAM
Building Blocks
Se rvi ce La ye
I E-LIM E- L M
r
r Tra ns po rt L aye r
Ne two rk La ye
ag/Y 802.1
.1731
Cisco As IP SL
ah 802.3
Performance Performance Management Management
BRKOPT-2114 14366_04_2008_c1
Cisco Public
Ethernet OAM
Decoder Ring IEEE 802.1ag
Connectivity Fault Management (CFM) Also referred as Service OAM
ITU-T Y.1731
OAM functions and mechanisms for Ethernet-based networks
MEF E-LMI
Ethernet Local Management Interface
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
Access E-LMI
Core
Provider Bridges
Provider Bridges
Residential
IP/MPLS
MPLS OAM
Residential
UNI
NNI
NNI
NNI
UNI
E-LMIUser to Network Interface (UNI) Link OAMAny point-point 802.3 link CFMEnd-to-End UNI to UNI MPLS OAMWithin MPLS cloud
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
BRKOPT-2114 14366_04_2008_c1
Cisco Public
10
OSI Model Application Presentation Higher Layers Session Transport Network Data Link Physical LLC OAM (Optional) MAC Physical Layer LAN CSMA/ CD Layers
Defines an optional OAM sub-layer Intended for single point-to-point IEEE 802.3 links Uses Slow Protocol* frames called OAMPDUs which are never forwarded by MAC clients Standardized: IEEE 802.3ah, Clause 57 (now in IEEE 802.3-2005)
BRKOPT-2114 14366_04_2008_c1
11
IEEE 802.3ah
Key Functions OAM Discovery
Discover OAM support and capabilities per device
Link Monitoring
Basic error definitions for Ethernet so entities can detect failed and degraded connections
Fault Signaling
Mechanisms for one entity to signal another that it has detected an error
Remote Loopback
Used to troubleshoot networks, allows one station to put the other station into a state whereby all inbound traffic is immediately reflected back onto the link
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
12
IEEE 802.3ah
OAM Events Set of events that may impact link operation Critical Link events
Link FaultFault in the Rx direction of local DTE Dying GaspUnrecoverable local failure condition Critical EventUnspecified critical event
Link events
Errored Symbol Period Event Errored Frame Event Errored Frame Period Event Errored Frame Seconds Summary Event
BRKOPT-2114 14366_04_2008_c1
Cisco Public
13
IEEE 802.3ah
Remote Loopback Fault localization and link performance testing Loopback Control OAMPDU is used to control a remote OAM client Traffic sent from master loopback port is loopback by slave port, except Pause and OAMPDU
OAM MAC PHY
Master OAM
Slave OAM
BRKOPT-2114 14366_04_2008_c1
Cisco Public
14
CE
uPE
GE0/0
GE2/7
CE
interface GigabitEthernet0/0 description To uPE11 gig2/7 ethernet oam remote-loopback supported ethernet oam
Access Switch
interface GigabitEthernet2/7 description To CE11 gig0/0 ethernet oam max-rate 5 ethernet oam remote-loopback supported ethernet oam timeout 30 ethernet oam remote-failure link-fault action error-disable-interface ethernet oam remote-failure dying-gasp action error-disable-interface ethernet oam remote-failure critical-event action error-disable-interface ethernet oam
Cisco Public
BRKOPT-2114 14366_04_2008_c1
15
BRKOPT-2114 14366_04_2008_c1
Cisco Public
16
CFM Overview
Family of protocols that provides capabilities to detect, verify, isolate and report end-to-end ethernet connectivity faults Employs regular Ethernet frames that travel in-band with the customer traffic
Devices that cannot interpret CFM Messages forward them as normal data frames
BRKOPT-2114 14366_04_2008_c1
Cisco Public
17
BRKOPT-2114 14366_04_2008_c1
Cisco Public
18
CFM Concepts
Maintenance Domain (MD)
CE CE
Operator B
MD may nest and touch, but never intersect Up to eight levels of nesting: MD Level (0..7)
The higher the level, the broader its reach
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
19
CFM Concepts
Maintenance Association (MA)
CE Operator A Operator B CE
Monitors connectivity of a particular service instance in a given MD (e.g. one service traversing four MDs = four MAs) Defined by a set of Maintenance End Points (MEP) at the edge of a domain Identified by MAID == Short MA Name + MD Name
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
20
10
CFM Concepts
Maintenance Point (MP)MEP
CE Operator A Operator B CE
MEP
Maintenance Association End Point (MEP) Define the boundaries of a MD Support the detection of connectivity failures between any pair of MEPs in an MA Associated per MA and identified by a MEPID (1-8191) Can initiate and respond to CFM PDUs
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
21
CFM Concepts
Maintenance Point (MP)MIP
CE Operator A Operator B CE
MEP
MIP MEP MEP MIP MIP MIP MIP MIP MEP MEP MIP MIP MIP MIP MIP
MEP
MIP
Maintenance Domain Intermediate Point (MIP) Support the discovery of paths among MEPs and location of faults along those paths Can be associated per MD, rather than per MA Can add, check and respond to received CFM PDUs
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
22
11
CFM Concepts
UP/Inward-Facing MEP CFM PDUs generated by the MEP are sent toward the Bridges Relay Function and not via the wire connected to the port where the MEP is configured CFM PDUs to be responded by the MEP are expected to arrive via the Bridges Relay Function Applicable to switches
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
Bridge
Relay Entity
Port A
Port B
CFM PDUs
23
CFM Concepts
DOWN/Outward-Facing MEP CFM PDUs generated by the MEP are sent via the wire connected to the port where the MEP is configured CFM PDUs to be responded by the MEP are expected to arrive via the wire connected to the port where the MEP is configured Applicable to routers and switches
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
Bridge/Router
Relay Entity
Port A
Port B
CFM PDUs
24
12
CFM Concepts
MAs and UP/DOWN MEPs Applicability of UP/DOWN MEPs in switches:
DOWN MEPs are typically used for MAs spanning a single link UP MEPs are commonly used for MAs with a wider reach (e.g. end-to-end, beyond a single link
DOWN MEP
Bridge 1 Bridge Port Relay Entity Bridge Port Bridge Port Relay Entity Bridge 2 Bridge Port
Monitored Area
UP MEP
Bridge 1 Bridge Port Relay Entity Bridge Port Bridge Port Relay Entity Bridge 2 Bridge Port
Monitored Area
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
25
CFM Protocols
There are three (3) protocols defined by CFM Continuity Check Protocol
Fault Detection Fault Notification
Loopback Protocol
Fault Verification
Linktrace Protocol
Fault Isolation
BRKOPT-2114 14366_04_2008_c1
Cisco Public
26
13
CFM Protocols
Continuity Check Protocol
CE Operator A Operator B CE
Catalogue Catalogue
MEP
MIP MIP
MEP
Used for Fault Detection and Notification Per-Maintenance Association multicast heart-beat messages
Carries status of port on which MEP is configured Uni-directional (no response required) Transmitted at a configurable periodic interval by MEPs
BRKOPT-2114 14366_04_2008_c1
Catalogued by MIPs at the same MD-Level, terminated by remote MEPs in the same MA
2008 Cisco Systems, Inc. All rights reserved. Cisco Public
27
CFM Protocols
Continuity Check ProtocolFault Detection
Detectable Faults Inability to receive consecutive CCMs from a remote MEP in the same MA Inability to receive CCMs from a remote MEP configured in the receiving device Reception of a CCM containing an RDI Flag bit set Remote port failure indicated by the reception of a CCM containing a Port Status TLV or Interface Status TLV Reception of its own CCM Reception of a CCM with an incorrect transmission interval Reception of a CCM with an incorrect MPID (i.e. duplicate value) Reception of a CCM from a remote MEP not configured in the receiving device Reception of a CCM with an incorrect MAID (e.g. MEP in another MA) Reception of a CCM with an MD Level lower than that of the receiving MEP
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
28
14
CrossCheck Function
Post-Provisioning Verification
CE 2 CE 1 CE 3 CE 4
MEP 3 MEP 4
Compares remote MEPs dynamically discovered (via CCM DB) versus expected MEPs (via config) for a given service Support alarms/notifications for
Service Operational/Unexpected End-Point/Missing End-Point
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
29
CFM Protocols
Loopback Protocol
CE Operator A Operator B CE
MEP
1 2
MIP MIP
MEP
1 Loopback Message (LBM) 2 Loopback Reply (LBR)
Used for Fault VerificationEthernet Ping MEP can transmit a unicast LBM to a MEP or MIP in the same MA Receiving MP responds by transforming the LBM into a unicast LBR sent back to the originating MEP
BRKOPT-2114 14366_04_2008_c1
Cisco Public
30
15
CFM Protocols
Linktrace Protocol
CE Operator A Operator B CE
MEP
1
MIP MIP
3 5
MEP
Used for Path Discovery and Fault IsolationEthernet Traceroute MEP can transmit a multicast message (LTM) in order to discover the MPs and path to a MIP or MEP in the same MA Each MIP along the path and the terminating MP return a unicast LTR to originating MEP
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
31
CFM Protocols
Putting Everything Together 1. Run Connectivity Check to proactively detect a soft or hard failure 2. Upon a failure detection, use Loopback to verify it 3. Upon verification, run Traceroute to isolate it; multiple segment LPs can also be used to isolate the fault 4. If the isolated fault points to a virtual circuit, then the OAM tools for that technology can be used to further fault isolatione.g., for MPLS PW, VCCV and MPLS ping can be used
BRKOPT-2114 14366_04_2008_c1
Cisco Public
32
16
Troubleshooting: Example
Customer CE 1 uPE B nPE B PE-Agg B Service Provider nPE A uPE A CE 2
!
Ethernet Access MPLS Core MPLS Access Loopback and Link Trace Tests
Operator Domains
BRKOPT-2114 14366_04_2008_c1
Cisco Public
33
MEP GE2/7
MIP GE2/1
MEP
interface GigabitEthernet2/7 ethernet cfm mip level 7 ethernet cfm mep level 4 mpid 1500 vlan 500
MIP
interface GigabitEthernet2/1 ethernet cfm mip level 4
MEP
Global Configuration
MIP
ethernet cfm domain Customer_Domain level 7 ethernet cfm domain Provider_Domain level 4 MD and MD Level service customer_500_provider vlan 500 ethernet cfm enable MA ethernet cfm traceroute cache ! ethernet cfm cc enable level any vlan any ! snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
34
17
CFM Deployment
Scenario A
CE1 Access 1 Aggregation 1 Aggregation 2
Ethernet Aggregation
Access 2
CE2
Admin Domain A
End to End service provided over a single Administrative Domain (e.g. Carrier A)
BRKOPT-2114 14366_04_2008_c1
Cisco Public
35
CFM Deployment
Scenario A (Cont.)
CE1 Access 1 Aggregation 1 Aggregation 2
Ethernet Aggregation
Access 2
CE2
Customer Domain
SP Domain
Link Domain
MEP
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
MIP
36
18
CFM Deployment
Scenario B
CE1 Access 1 Aggregation 1 Aggregation 2
Ethernet Aggregation
Access 2
CE2
Admin Domain A
Admin Domain B
End to End service provided by a SP (e.g. Carrier A) who relies on another SP access network (e.g. Carrier B) to reach some customer sites
BRKOPT-2114 14366_04_2008_c1
Cisco Public
37
CFM Deployment
Scenario B (Cont.)
CE1 Access 1 Aggregation 1 Aggregation 2
Ethernet Aggregation
Access 2
CE2
Customer Domain
SP Domain
Operator Domain
Link Domain
MEP
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
MIP
38
19
BRKOPT-2114 14366_04_2008_c1
Cisco Public
39
ITU-T Y.1731
OAM Functions for Fault Management
Ethernet Continuity Check, Loopback and Link Trace (ETH-CC, ETH-LB and ETH-LT) Inline with CFM standard with added extensions: Multicast LBM, unicast CCM possible in Y.1731 Ethernet Locked Signal (ETH-LCK) Ethernet Test Signal (ETH-TEST) Alarm Indication Signal (ETH-AIS) Ethernet Remote Defect Indication (ETH-RDI)
40
20
BRKOPT-2114 14366_04_2008_c1
Cisco Public
41
Ethernet LMI
Overview
Provides protocol and mechanisms used for:
Notification of Remote UNI status to CE Notification of EVC addition, deletion or status (Active, Not Active, Partially Active) to CE Communication of UNI and EVC attributes to CE (e.g. CE-VLAN to EVC map) CE auto-configuration
Asymmetric protocol based on Frame Relay LMI, mainly applicable to the UNI (UNI-C and UNI-N) Specification completed by MEF:
http://www.metroethernetforum. org/PDFs/Standards/MEF16.doc
CE E-LMI
BRKOPT-2114 14366_04_2008_c1
Cisco Public
42
21
Ethernet LMI
Periodic Polling and Asynchronous Update
ELMI-CE (UNI-C)
Based on polling procedure invoked by CE N391Polling Counter, polling cycles between Full Status exchanges N393Status Counter, number of consecutive errors T391Polling Timer (PT), UNI-C transmits Status Enq. T392Polling Verification Timer (PVT), timer by which UNI-N expects to be polled
D A B
ELMI-PE (UNI-N)
STATUS ENQ (Ethernet LMI Check) STATUS (Ethernet LMI Check) STATUS ENQ (Ethernet LMI Check) STATUS (Ethernet LMI Check) STATUS ENQ (Full Status Req) STATUS (Full Status Resp) STATUS ENQ (Ethernet LMI Check) STATUS (Ethernet LMI Check)
A B
A B
A B
B D
MEN Update
43
BRKOPT-2114 14366_04_2008_c1
C
2008 Cisco Systems, Inc. All rights reserved. Cisco Public
Operator B
uPE
CE
GE0/0
GE2/7
ELMI-CE
interface GigabitEthernet0/0 description To uPE11 gig2/7 ethernet lmi interface ! interface GigabitEthernet0/0.500 description L3VPN service encapsulation dot1Q 500 ip address 2.2.2.2 255.255.255.0
ELMI-PE*
ethernet lmi global ethernet evc EVC_P2P_500 uni count 2 oam protocol cfm svlan 500 domain Provider_Domain ! interface GigabitEthernet2/7 description To CE11 gig0/0 ethernet uni id CE11_UNI service instance 666 ethernet EVC_P2P_500 ethernet lmi ce-vlan map 500 ethernet lmi interface
*The ELMI-PE configuration is incomplete as it is missing the CFM component that allows ELMI to communicate EVC/UNI status to CE; see OAM IW example for complete configuration
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
44
22
BRKOPT-2114 14366_04_2008_c1
Cisco Public
45
Strict OAM layering should be honored: messages should not cross layers
Customer Bridge
BRKOPT-2114 14366_04_2008_c1
OAM Messages should not leak outside domain boundaries within a layer Interworking may be inter-layer and intra-layer Event Translation
Ethernet over SONET Ethernet over MPLS 10G ATM Inter-Domains Ethernet RFC1483
Transport OAM
2008 Cisco Systems, Inc. All rights reserved.
Switch
Switch
Router
Router
Router
Bridge
Network OAM
Bridge
Intra-Layer
Bridge
Customer Bridge
Service OAM
Transport OAM
Cisco Public
Transport OAM
Transport OAM
46
23
Interworking Scenarios
Main Examples
Cisco Public
Interworking Scenarios
CFM to E-LMI
Customer Service Provider CE
Service Layer OAM CFM to E-LMI I/W E-LMI Network Layer OAM
CFM at Provider Level acts as MEN OAM: provides EVC Status and Remote UNI Status/Name to E-LMI
Port State TLV of CC Messages carry remote UNI status MEP Name TLV of CC Messages carry remote UNI name Status of remote MEP in CCDB indicates EVC State
2008 Cisco Systems, Inc. All rights reserved. Cisco Public
BRKOPT-2114 14366_04_2008_c1
48
24
Interworking Scenarios
802.3ah to CFM (CC-Based)
Customer Service Provider CE
Service Layer OAM CC Transport Layer OAM 802.3ah to CFM I/W 802.3ah
Link Layer Defects detected by 802.3ah, relayed to CFM on same device CFM notifies remote devices of localized fault Two variants:
CC-based (802.3ah on edge of domain)
BRKOPT-2114 14366_04_2008_c1
49
Interworking Scenarios
802.3ah to CFM (AIS-Based)
Customer Service Provider CE
Service Layer OAM AIS AIS Transport Layer OAM 802.3ah 802.3ah to CFM I/W
Link Layer Defects detected by 802.3ah, relayed to CFM on same device CFM notifies remote devices of localized fault Two variants:
CC-based (802.3ah on edge of domain)
BRKOPT-2114 14366_04_2008_c1
50
25
Interworking Scenarios
MPLS PW OAM to CFM
Customer Service Provider CE
MPLS Aggregation
AIS
AIS
VCCV-BFD
D-LDP
Directed-LDP and VCCV (BFD mode) running between nPEs D-LDP for defect notification, VCCV for defect detection Three-way I/W function at nPE Requires CFM AIS/RDI
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
51
Interworking Scenarios
MPLS PW OAM to E-LMI
Customer Service Provider Customer CE
MPLS Core
CE 1
PE B
PE A
CE 2
E-LMI
VCCV-BFD
Directed-LDP and VCCV (BFD mode) running between PEs D-LDP for defect notification, VCCV for defect detection Defects detected/communicated by PW OAM are relayed to E-LMI via I/W function on PE
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
52
26
MEP GE2/7
MIP GE2/1
Interface Configuration Global Configuration ethernet cfm domain Customer_Domain level 7 ethernet cfm domain Provider_Domain level 4 service customer_500_provider vlan 500 ethernet cfm enable ! ethernet evc EVC_P2P_500 uni count 2 oam protocol cfm svlan 500 domain Provider_Domain ! ethernet cfm cc enable level any vlan any ! snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
interface GigabitEthernet2/1 description NNI Uplink switchport trunk allowed vlan 500 switchport mode trunk ethernet cfm mip level 4 ! interface GigabitEthernet2/7 description UNI To CE11 switchport trunk allowed vlan 500 switchport mode trunk ethernet uni id CE11_UNI service instance 666 ethernet EVC_P2P_500 ethernet lmi ce-vlan map 500 ethernet lmi interface ethernet oam ethernet cfm mip level 7 ethernet cfm mep level 4 mpid 1500 vlan 500
53
BRKOPT-2114 14366_04_2008_c1
Cisco Public
54
27
CFM Instrumentation
Cisco SNMP Traps Cisco-defined MIB (CISCO-ETHER-CFM-MIB) CCM traps generated by MEPs Trap Type Object cEtherCfmCcMepUp cEtherCfmCcMepDown CCM cEtherCfmCcCrossconnect cEtherCfmCcLoop cEtherCfmCcConfigError
BRKOPT-2114 14366_04_2008_c1
Cisco Public
55
CFM Instrumentation
Cisco SNMP Traps (Cont.) Cisco-defined MIB (CISCO-ETHER-CFM-MIB) Crosschecks traps generated by MEPs Trap Type CrossCheck Object cEtherCfmXCheckServiceUp cEtherCfmXCheckMissing cEtherCfmXCheckUnknown
BRKOPT-2114 14366_04_2008_c1
Cisco Public
56
28
CFM Instrumentation
Continuity Check ProtocolFault Detection
CCM-Based Detectable Faults
Inability to receive consecutive CCMs from a remote MEP in the same MA
Inability to receive CCMs from a remote MEP configured in the receiving Crosscheck MEP crosscheck list Missing MEP Remote port failure indicated by the reception of a CCM containing a Port Status TLV or Interface Status TLV Reception of its own CCM Reception of a CCM with a Lifetime of zero (Last Gasp CCM due to remote MEP removed or disabled) Reception of a CCM with an incorrect MPID (i.e. duplicate value) Reception of a CCM from a remote MEP not configured in the receiving MEP crosscheck list Reception of a CCM from a remote MEP assigned to another service The reception of a CCM with an incorrect MAID
BRKOPT-2114 14366_04_2008_c1
CCM MEP Up (code: portState) CCM Loop CCM MEP Down (code: lastGasp) CCM Configuration Error Crosscheck Unknown MEP CCM Crossconnect
Cisco Public
57
CFM Instrumentation
Continuity Check ProtocolFault Detection (Cont.)
CCM-Based Detectable Events
Discovery of a remote MEP for the first time Re-discovery of a previously expired remote MEP Remote port recovery - The reception by a MEP of a CCM containing a Port Status TLV or Interface Status TLV The reception by a MEP of CCMs from ALL remote MEP configured in the receiving MEP crosscheck list
58
29
Ethernet Access
MPLS Aggregation/Core
Ethernet Access
7600
EoMPLS Pseudowire
7600
Cisco Public
59
Ethernet Access
MPLS Aggregation/Core
Ethernet Access
CE 11
uPE 11
nPE 11
EoMPLS Pseudowire
nPE 31
uPE 31
CE 31
Cisco Public
60
30
nPE 31
uPE 31
CE 31
CCM Database
uPE11#show ethernet cfm maintenance-points remote MPID Level Mac Address Vlan PortState InGressPort 3100 4 0012.017c.3d00 100 UP Gi0/16
BRKOPT-2114 14366_04_2008_c1
Cisco Public
61
nPE 31
uPE 31
CE 31
uPE11#ping ethernet mpid 3100 level 4 vlan 100 Type escape sequence to abort. Sending 5 Ethernet CFM loopback messages, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
BRKOPT-2114 14366_04_2008_c1
Cisco Public
62
31
nPE 31
uPE 31
CE 31
63
nPE 31
uPE 31
CE 31
BRKOPT-2114 14366_04_2008_c1
Cisco Public
64
32
nPE 31
uPE 31
CE 31
ELMI Status Enquiry Message (Full Status Report) ELMI Status Message (Full Status Report)
Example:
Local UNI ID CE-VLAN/EVC Map type EVC ID EVC Type CE-VLAN/EVC Map EVC Status Remote UNI count configured Remote UNI count active Remote UNI ID Remote UNI status
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
nPE 31
uPE 31
CE 31
ELMI Status Enquiry Message (Full Status Report) ELMI Status Message (Full Status Report)
CE11#show ethernet lmi evc detail EVC_P2P_100 EVC Id: EVC_P2P_100 interface GigabitEthernet0/0 Time since Last Full Report: 00:08:24 Ether LMI Link Status: Up UNI Status: Up UNI Id: CE11_UNI CE-VLAN/EVC Map Type: Service Multiplexing with no bundling VLAN: 100 EVC Status: Active EVC Type: Point-to-Point Remote UNI Count: Configured = 1, Active = 1 UNI Id -----CE31_UNI
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
Port ---Remote 66
33
nPE 31
uPE 31
CE 31
X
P Failure: no mpls ip PE Looses Directly Attached LDP Neighbor LFIB Cleanup; No Tunnel Label for PW PE Transmits LDP Status TLV Local LDP TLV Status sent: Down (pw-tx-fault)
Remote LDP TLV Status Received: Down (pw-tx-fault) CFM Remote MEP Timeout MEP Down (Timeout) SNMP Trap EVC Declared Inactive CFM to ELMI Interworking ELMI Status Message Async EVC Report CE Brings Down (Sub)interface
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
CFM Remote MEP Timeout MEP Down (Timeout) SNMP Trap EVC Declared Inactive CFM to ELMI Interworking ELMI Status Message Async EVC Report CE Brings Down (Sub)interface
67
nPE 31
uPE 31
CE 31
X
CE11# Feb 3 02:22:40.820: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0.100, changed state to down CE11#show ethernet lmi evc detail EVC_P2P_100 EVC Id: EVC_P2P_100 interface GigabitEthernet0/0 Time since Last Full Report: 00:12:53 Ether LMI Link Status: Up UNI Status: Up UNI Id: CE11_UNI CE-VLAN/EVC Map Type: Service Multiplexing with no bundling VLAN: 100 EVC Status: Inactive EVC Type: Point-to-Point Remote UNI Count: Configured = 1, Active = 0 UNI Id -----CE31_UNI UNI Status ---------Unreachable Port ---Remote
BRKOPT-2114 14366_04_2008_c1
Cisco Public
68
34
nPE 31
uPE 31
CE 31
X
uPE11# Feb 3 02:22:39.814: %ETHER_SERVICE-6-EVC_STATUS_CHANGED: status of EVC_P2P_100 changed to InActive uPE11#show ethernet cfm errors Level Vlan MPID Remote MAC Reason Service ID 4 100 3100 0012.017c.3d00 Lifetime Timer Expir customer_100_provider uPE11#ping ethernet mpid 3100 level 4 vlan 100 Type escape sequence to abort. Sending 5 Ethernet CFM loopback messages, timeout is 2 seconds: ..... Success rate is 0 percent (0/5)
uPE11#traceroute ethernet 0012.017c.3d00 level 4 vlan 100 Type escape sequence to abort. TTL 255. Per-Hop Timeout is 10 seconds Tracing the route to 0012.017c.3d00 on Domain PROVIDER_DOMAIN, Level 4, vlan 100 Traceroute sent via GigabitEthernet0/16 -------------------------------------------------------------------------------MAC Ingress Ingress Action Relay Action Hops Host Forwarded Egress Egress Action Next Hop -------------------------------------------------------------------------------B 1 nPE11 0013.5f21.cec5 Gi3/1 IngOk RlyCCDB Forwarded * *
2008 Cisco Systems, Inc. All rights reserved. Cisco Public
BRKOPT-2114 14366_04_2008_c1
69
nPE 31
uPE 31
CE 31
X
CE UNI Failure: Admin Shutdown CE Transmits 802.3ah Dying Gasp EVC Declared Inactive 802.3ah to CFM InterWorking CFM CCM Port State TLV DOWN CFM MEP Up (Port Sate Down) SNMP Trap EVC Declared Inactive CFM to ELMI InterWorking ELMI Status Message Async EVC Report CE Brings Down (Sub)interface
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
70
35
nPE 31
uPE 31
CE 31
X
uPE11# Feb 4 15:03:08.182: %ETHER_SERVICE-6-EVC_STATUS_CHANGED: status of EVC_P2P_100 changed to InActive uPE11#show ethernet cfm maintenance-points remote MPID Level Mac Address Vlan PortState InGressPort 3100* 4 0012.017c.3d00 100 DOWN Gi0/16 customer_100_provider Age(sec) Service ID 7
CE11# Feb 4 15:03:08.183: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0.100, changed state to down CE11#show ethernet lmi evc detail EVC_P2P_100 EVC Id: EVC_P2P_100 interface GigabitEthernet0/0 Time since Last Full Report: 00:01:26 Ether LMI Link Status: Up UNI Status: Up UNI Id: CE11_UNI CE-VLAN/EVC Map Type: Service Multiplexing with no bundling VLAN: 100 EVC Status: Inactive EVC Type: Point-to-Point Remote UNI Count: Configured = 1, Active = 0 UNI Id -----CE31_UNI BRKOPT-2114
14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved.
Port ---Remote 71
BRKOPT-2114 14366_04_2008_c1
Cisco Public
72
36
Cisco IP SLAs
Performance Management
Cisco IP SLAs
MPLS
Echo Probe Jitter Probe
CFM
Embedded Policy Management
IP
73
Cisco IP SLA
CFM Integration Highlights
In-Band Performance Management Tool for Ethernet
Use native Ethernet frames IP not required
74
37
Cisco IP SLA
Ethernet Probe Types
Probe Type Capability Per Service, Ethernet Probe Echo Probe Uses CFM LBM/LBR PDUs Measures RTT Per Service, Ethernet Probe Jitter Probe Uses Proprietary CFM Messages Measures Unidirectional Packet Loss, Jitter and Latency
BRKOPT-2114 14366_04_2008_c1
Cisco Public
75
Cisco IP SLA
Hierarchical Performance Management
Access
Customer Equipment
U-PE A N-PE 1 N-PE 3
SP Network Core
U-PE D MPLS
CE Native Ethernet CE
MPLS
CE
U-PE B
N-PE 4 N-PE 2
Native Ethernet
U-PE C
CE
Customer Domain
SLA measurement operations in one domain are transparent to higher/lower domains Allows for segmented, composite and end-to-end measurements Follows CFM Maintenance Domain Hierarchical Model: Customer, Service Provider, Operator
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
76
38
Cisco IP SLA
Probe Endpoint Auto Discovery
Probe endpoints dynamically discovered for given VLAN within a Maintenance Domain New probes automatically created for newly added endpoints (sites)
Add New Site Customer Equipment CE Native Ethernet CE
N-PE 4 N-PE 2 U-PE C Native Ethernet
Access
N-PE 1
SP Network Core
C
U-PE A N-PE 3
B
U-PE D
MPLS
MPLS
CE
CE
U-PE B
Probe: VLAN 100 Domain SP1 A MPID AAAA B MPID BBBB C MPID CCCC
Only Need to Configure New Site CE for CFM No Changes to Existing Sites for SLA Measurement
BRKOPT-2114 14366_04_2008_c1
Cisco Public
77
Summary
BRKOPT-2114 14366_04_2008_c1
Cisco Public
78
39
Cisco 1800
Cisco ME-3400
Cisco 7600
X X X X X X N/A X
X X X X X X
X X
X X X
X X X
X
79
X = Shipping
2008 Cisco Systems, Inc. All rights reserved.
X = Shipping
BRKOPT-2114 14366_04_2008_c1
Cisco Public
80
40
K5-Metro (ME-X45-SUP6-E)
ONS 15454
(ML-MR-10)
Q3 CY08 12.2(46)XO
*Sup II-Plus, Sup II-Plus-TS, Sup II-Plus-10GE, Sup III (EOL), Sup IV, Sup V, Sup V-10GE, Sup 6-E
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
81
Summary
Ciscos Carrier Ethernet OAM: Industrys Only Solution with End-to-End Manageability and Customer Loyalty Service Level Assurance
1800, 2800, 3800 ISR ME 3400, 3750 Metro 7600
7600
7600
7600
7600
Core
ME 3400 ISR
E-LMI 802.3ah
Benefits
End-to-End Service Manageability First Mile Physical Connectivity Verification Pro-active Service Status and Availability
82
41
83
Cisco IOS 12.2SREoMPLS Remote Link Failure Notification via E-LMI (aka Remote Port Shutdown)
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sr/newft/122sr b33/srbrpsdn.htm
BRKOPT-2114 14366_04_2008_c1
Cisco Public
84
42
Cisco IOS 12.2(37)SECisco Catalyst 3750-ME, CFM, E-LMI and Link OAM
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750m/12237se/scg/sw oam.htm
Cisco IOS 12.4(9)TCisco ISR Router Family, Ethernet Local Management Interface (E-LMI)
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124t /124t9/htethlmi.htm
Cisco IOS 12.4(11)TCisco ISR Router Family, Connectivity Fault Management (CFM)
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124t /124t11/srethcfm.htm
BRKOPT-2114 14366_04_2008_c1 2008 Cisco Systems, Inc. All rights reserved. Cisco Public
85
Acronyms
Acronym
AIS CCM CCMDB CE CFM EFM E-LMI E-OAM EVC IEEE ITU LBM LBR LMI LTM LTR MA MAID MD
BRKOPT-2114 14366_04_2008_c1
Acronym
Alarm Indication Signal Continuity Check Message CCM Data Base (see CCM) Customer Edge Connectivity Fault Management Ethernet in the First Mile Ethernet LMI (see LMI) Ethernet OAM (see OAM) Ethernet Virtual Connection Institute of Electrical and Electronics Engineers International Telecommunication Union Loopback Message Loopback Reply Local Management Interface Linktrace Message Linktrace Reply Maintenance Association MA Identifier (see MA) Maintenance Domain MEF MEN MEP MEPID MHF MIB MIP MP OAM PDU PE RDI RFI TLV UNI UNI-C UNI-N VID VLAN
Cisco Public
Metro Ethernet Forum Metro Ethernet Network Maintenance Association End Point MEP Identifier (see MEP) MIP Half Function (see MIP) Management Information Base Maintenance Domain Intermediate Point Maintenance Point Operations, Administration and Maintenance Protocol Data Unit Provide Edge Remote Defect Indicator Remote Failure Indicator Type, Length, Value User to Network Interface Customer Side of UNI (see UNI) Network Side of UNI (see UNI) VLAN Identifier Virtual LAN
86
43
Q and A
BRKOPT-2114 14366_04_2008_c1
Cisco Public
87
Recommended Reading
Continue your Cisco Live learning experience with further reading from Cisco Press Check the Recommended Reading flyer for suggested books
88
44
BRKOPT-2114 14366_04_2008_c1
Cisco Public
89
BRKOPT-2114 14366_04_2008_c1
Cisco Public
90
45