Professional Documents
Culture Documents
PART NO.
29919
CODE NO.
DESCRIPTION
Heat treated alloy steel body, sharp-nose carbide tip, short retainer Heat treated alloy steel body, sharp-nose carbide tip, short retainer Heat treated alloy steel body, sharp-nose carbide tip, short retainer Heat treated alloy steel body, sharp-nose carbide tip, short retainer Heat treated alloy steel body, sharp-nose carbide tip, short retainer Heat treated alloy steel body, sharp-nose carbide tip, short retainer Heat treated alloy steel body, sharp-nose carbide tip, short retainer
APPLICATION
For soft to hard rock and concrete. Carbide tip (3/8 dia.) provides strength and long tool life. For drilling most soils and broken or laminated rock. For drilling most soils and broken or laminated rock. For drilling most soils and broken or laminated rock. For drilling most soils and broken or laminated rock. For drilling most soils and broken or laminated rock. For drilling most soils and broken or laminated rock.
C31
2429821
C32
A001370
RB31HD
A001377
RB31SN-FL
A001372
RB40XHD
A001537
RC31HD
2429228
TX40HD
PART NO.
29919 2429821 A001370 A001377 A001372 A001537 2429228
DESCRIPTION
TOOTH,C31 TOOTH,C32 TOOTH,RB31HD TOOTH,RB31SN-FL TOOTH,RB40XHD TOOTH,RC31HD TOOTH,TX40HD
SHANK SIZE
0.99 0.99 0.99 0.99 0.99 0.99 0.99
PER LBS LBS / KGS / PCS/ LBS / KGS / BUCKET EACH BUCKET BUCKET PALLET PALLET PALLET
25 25 40 25 30 25 25 1.06 1.08 1.09 1.05 1.37 1.01 1.38 27.35 28.10 43.85 26.85 42.55 26.80 34.50 12.41 12.75 19.89 12.18 19.30 12.16 15.65 1250 1250 2000 1250 1500 1250 1250 1367.50 1405.00 2192.50 1342.50 2127.50 1340.00 1725.00 620.29 637.30 994.50 608.95 965.02 607.82 782.45
ph: 1.800.447.2781
email: augertools@terex.com
Effective Date: August 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operators Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operators Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
APPLICATION
Accepts all short retainer teeth. Welded with 7018 or 8018 low-hydrogen rod. Accepts all short retainer and snap ring teeth. Welded with 7018 or 8018 lowhydrogen rod. For buckets, barrels, and special applications. Welded with 7018 or 8018 low-hydrogen rod.
2469176
C30
29947
C30H/U40H
A001405
RC30F
PART NO.
2469176 29947 A001405
DESCRIPTION
BLOCK,C30 BLOCK,C30H/U40H BLOCK,RC30F
SHANK SIZE
0.99 0.99 0.99
LBS LBS / KGS / PCS/ LBS / KGS / EACH BUCKET BUCKET PALLET PALLET PALLET
3.10 3.95 1.30 47.15 32.55 20.10 21.39 14.76 9.12 750 400 750 2357.50 1627.50 1005.00 1069.34 738.22 455.86
ph: 1.800.447.2781
email: augertools@terex.com
Effective Date: August 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operators Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operators Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.