Professional Documents
Culture Documents
S e r i e s ]
Side-mount tool changer (20+1 tools) swaps tools in just 0.8 seconds
A high-volume coolant system and optional dual augers clear chips from the enclosure quickly
2400 ipm rapids and accelerations to 1G combine to reduce cycle times Heavy cast-iron base FEA optimized for rigidity
[ Options ]
[ Standard Features ]
p a r t i a l
l i s t
15 hp Vector Drive 12,000-rpm BT30 Taper Spindle Inline Direct Drive 20+1 Side-Mount Tool Changer 15" Color LCD Monitor w/USB Port High-Speed Rigid Tapping Made in the USA
Through-Spindle Coolant System Programmable Coolant Nozzle Dual Chip Augers High-Speed Machining w/Look-Ahead Haas Intuitive Programming System Wireless Intuitive Probing System 4th- and 5th-Axis Drives
[Technical Specifications]
DT-1 20" 508 mm 16" 406 mm 15.5" 394 mm 26" 660 mm 15" 381 mm 150 lb 68 kg 12,000 rpm Inline Direct Drive 46 ft-lb @ 1700 rpm 62 Nm @ 1 700 rpm 15 hp 11.2 kW 5000 rpm 1/2"13 M121.75 2400 ipm 61.0 m/min 1200 ipm 30.5 m/min up to 1G (32 ft/sec2) 9.8 m/sec2 20+1 BT 30 2.0" 51 mm 0.8 sec 1.5 sec 195 - 260 VAC 3-Phase 45 gal 170 L
Door Open
Tool to Tool Chip to Chip General Power Required (min) Coolant Capacity
B
Front Top
1At
Operating Dimensions
A. Max Operating Height B. Max Operating Width C. Max Operating Depth D. Max Operating DepthCw/coolant tankD E R T I F I E
With control swung forward. Additional 36" (914 mm) required to open rear service panel.
C E R T I F I E D
DT-1
103" 2 616 mm 68" 1 727 mm 100" 2 540 mm 124" 3 150 mm
1G acceleration; up to 500 lb (227 kg) with reduced accelerations. May require machine anchoring. Contact your HFO for additional information.
Specifications subject to change without notice. Not responsible for typographical errors. Machines shown with optional equipment.
July 2011