You are on page 1of 2

Calculation results

Customer name: Reference: Kamen Steel Industries Sdn. Bhd. JD1 - Pull Block + A/C 200HP Motor (Inverter Control)

Input data: Rated power [kW] Rated torque [Nm] Requested service factor Driver speed [r/min] Driven speed [r/min] Drive: Overall width [mm] Overall length [mm] Overall height [mm] Pulley center distance [mm] Span length [mm] Actual driven speed [r/min] Belt: Designation Number of belts Actual service factor Belt power rating [kW] Belt mass [kg] (Aprox.) Belt width [mm] Driver pulley: Designation Reference diameter [mm] Nominal taper lock Taperlock shaft diameter range [mm] Driven pulley: Designation Reference diameter [mm] Nominal taper lock Taperlock shaft diameter range [mm] Hub loads: Static hub loads for NEW belt [N] Static hub loads for RUN-IN belt [N] Dynamic hub loads for NEW belt [N] Dynamic hub loads for RUN-IN belt [N] Tensioning: Installation strand tension for NEW belt [N] Installation strand tension for RUN-IN belt [N] Deflection forces for SKF Belt tension pen gauge [kg] NEW RUN Vibrating frequency for SKF Belt Frequency Meter [Hz] NEW RUN

150 994.72 1.5 1440 2000

196 1252.32 322 975.82 974.76 2005.56

PHG SPB2800XP 10 1.52 227.82 0.63 16.00

PHP 10SPB315TB 315 PHF TB3535X85MM 35 -- 90

PHP 10SPB224TB 224 PHF TB3535X70MM 35 -- 90

23047.66 15365.1 20383.67 12701.12

1152.38 768.26 7.48 5.04 36.71 29.97


SKF Belt Frequency Meter (PHL FM 10/400) Belt tension pen gauge (PUB PSD C1/007)

Date: 16/07/2011
SKF is a registered trademark of the SKF Group. SKF 2011 The contents of this report are the copyright of the publisher and may not be reproduced (even extracts) unless permission is granted. Every care has been taken to ensure the accuracy of the information contained in this report but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.

1/2

Drive layout

Belt
PHG SPB2800XP
Wedge SPB XP
Belt marking No. of ribs Pitch length (mm) Effective length (in) Width (mm) Height (mm) SPB2800 XP 1 2800 110.2 16.3 13

Driver pulley
PHP 10SPB315TB
Pitch diameter (mm) Outside diameter (mm) Pulley type Bush no. Min. bore (mm) Max. bore (mm) F E G K L M H Weight (lbs.) 315 322 7 3535 35 90 196 272 53.5 89 53.5 170 28.8

Driver bushing
PHF TB3535X85MM
Bushing no. Bore diameter (mm) Keyway width (mm) Keyway depth (mm) A (mm) B (mm) D (mm) E (mm) F (mm) Weight (kg) TB3535 85 22 5.4 127 89 123 12.700 x 38.10 3.42

Driven pulley
PHP 10SPB224TB
Pitch diameter (mm) Outside diameter (mm) Pulley type Bush no. Min. bore (mm) Max. bore (mm) F E G K L M H Weight (lbs.) 224 231 3 3535 35 90 196 181 53.5 89 53.5 20.5

Driven bushing
PHF TB3535X70MM
Bushing no. Bore diameter (mm) Keyway width (mm) Keyway depth (mm) A (mm) B (mm) D (mm) E (mm) F (mm) Weight (kg) TB3535 70 20 4.9 127 89 123 12.700 x 38.10 4.65

SKF is a registered trademark of the SKF Group. SKF 2011 The contents of this report are the copyright of the publisher and may not be reproduced (even extracts) unless permission is granted. Every care has been taken to ensure the accuracy of the information contained in this report but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.

2/2

You might also like