Professional Documents
Culture Documents
Order with one simple form Quick turnaround Wire cut to precisely match panel profile/angle True fit, fewer gaps Wont bleed or dry out
If you want an easy-order, superior seal beveled closure, Anglekuts got you covered
Why beveled closures? Because a beveled closures unique design creates a superior seal between metal roof panels that stops heavy and damaging water from getting in and around the hips and valleys of the roof. And because Anglekut can be made at any angle, it will fit any profile and seal out wind, water, birds, and noise. That makes this product ideal for use in the construction of barns, warehouses, house roofs, and other types of metal roof structures. Beveled closure designs make a valley or hip application easy to install. And you wind up with a seal as air tight as standard 90-degree closure strips. Anglekut beveled closures are made from crosslink polyethylene foam, the same material as M-Cell closures, which means theyll last the lifetime of the building. Because the product doesnt bleed, dry out, or dissolve with weather and UV exposure, using 1-1/2 thick foam increases the strength of the beveled closure and ensures a superior seal of the open area. The dynamic design of these beveled closures makes it an easy replacement for materials like polyurethane strips or caulking. Think it will be hard to order a beveled closure product? No way. Just fill out Anglekut Easy-Order Form on the back of this sheet. Youll get quick turnaround, too! If you want a truly superior seal beveled closure, theres only one that will make the kut. Anglekut.
anglekut
Its fast and easy to order Angle-Kut. Just call 1-800-800-8590 and well walk you through each step in minutes!
Anglekut
TM
Complete the following information for each separate closure configuration and beveled angle: 1. Panel Name: __________________________________________________________ 2. Application: End Wall ______________ Hip ______________ Valley _______________ 3. Cut-back Angle: _______________________________________________________ 4. Roof Slope (Rise/Run) ________________________ / __________________________ 5. A. Number of Panels - Inside: Left Hand__________ Right Hand__________ Outside: Left Hand__________ Right Hand__________ OR B. Quantity in Lineal Ft. - Inside: Left Hand__________ Right Hand__________ Outside: Left Hand__________ Right Hand__________
Key to order entry information: 50 Cut-back angle Panel viewed as plan view for roof or as elevation view for wall panel application. 20 Cut-back angle
AngleKut represents yet another Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the building industry.
Marco Industries Corporate: 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536
MPC0910
Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
Marco Industries Closure-Foam gives you so many options when ventilation isnt an issue for your project. 400 profiles are already in our line and if yours isnt one of them, we make custom ordering incredibly easy. So you get precisely the fit and foam you need for your exact application. Marcos M63 Industrial Adhesive. Its a big deal,
You choose application of the adhesive strip to the flat or the ribbed side of the closure strip. And with Marcos glue line automation, you can depend on a fast turnaround after ordering. You can also choose dovetails, available with most profiles. Interlocking dovetails eliminate gaps, ensure a snug end-toend fit, and are available with or without the M63 Industrial Adhesive. Whats more, all scrap foam parts resulting from die-cuts are removed leaving you with less job site cleanup. Closure-Foam is economically priced, but you wont sacrifice quality. For example, M-Cell thick crosslink polyethylene foam is heat-treated, creating a unique coating which gives it better UV resistance, better durability than the industry standard . In fact, the latest ozone literature confirms that our 1.5 density foam provides better UV stability than competitive products with a 2.0 density.
because applied to all products is a full bead once installed so it stays put during installation and you no longer need to worry about blow away problems. The M63 adhesive is super strong and specially designed to adhere even in subfreezing temperatures and to wet surfaces.
This protective coating forms during the heattreated process of manufacturing and shields the product from harmful UV rays.
flex-o-vent
Fasteners
anglekut x-seal
lp2
anglekut
roof boots
Mastix
Weathertite Sealant/adheSive
Clips
CLosUre FoaM
Typical application
Interlocking dovetails
Property Test Procedure Units LD24 Nominal Density - Skin/Skin BS ISO 7214 1998 kg/m 24 Internal mm 0.3 Cell Size Typical Diameter Compression Stress-Strain BS ISO 7214 1998 kPa 34 10% compression kPa 53 25% compression kPa 85 40% compression kPa 118 50% compression BS ISO 7214 1998 Compression Set 25 mm cell-cell 25% comp., 22hr, 23C % set 13 hr recovery % set 5 24hr recovery 50% comp., 22hr, 23C % set 27 hr recovery % set 19 24hr recovery ISO 7214 1998 kPa 320 Tensile Strength % 130 Tensile Elongation BS EN ISO 8067 1995 N/m 495 Tear Strength ISO 868 1985 Shore Hardness OO Scale OO 50 10mm cell/cell thickness Internal C +100 max Recommended operating -70 min temperature range* ISO 8302 1991 W /m.K 0.0392 Thermal Conductivity mean temp of 10C Flammability FMVSS.302 Burn rate <100mm/min. Pass: 12 mm Automotive and thicker ISO 7214 1998 Horizontal Burn Rate mm/sec 2.1 5mm thick 13mm thick mm/sec 1.5 50 Shore 00 Durometer lbs/ft3 5% Water
UV resistance
Heig ht
Marco Industries Corporate: 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536
MPC0311
Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
h idt W
W e A t h e R - t i t e
d o o R S :
Rolled edge
theRmAl bReAk
Helps keep hot and cold outside
3-1/2 15/16 Narrow Profile .63 Pre-finished Aluminum 3-1/2" Narrow Profile Steel 15/16"
15/16
Rolled edge creates dependable seal Dual contact weather strip Thermal break keeps hot and cold outside 4-way universal swing prevents jobsite change problems Choose all steel or aluminum frame Frames are 3-1/2 or 5 All steel 26 Ga. skin Non-collapsible lockset insert Inner lock design for quality looks
meet handicap specifications. Plus, the dual contact weather strip really seals the deal. These value-priced doors come with fixed-pin hinges, 2-3/4 backset standard, and are prehung with 4-way universal swing (see swing information on back) to prevent last minute jobsite changes.. The AS1 model comes in white with a special woodgrain (paintable) finish. Marcos other four steel-frame model doors are available in whitewith brown, bronze, and clay available as special order. The A2 aluminum frame model is available in mill finishwith white available as special order. Other options on all door models include windows, deadbolt lockset, door closer, double door with astragal (no center post), and 24 Ga. skin. So if youre trying to pick the best door, rememberMarcos Weather-Tite doors have a real edge. A rolled, dependable seal edge.
15/16"
Standard: White Special Order: Brown, Bronze, Clay Standard: White Special Order: Brown, Bronze, Clay Standard: White Special Order: Brown, Bronze, Clay Standard: White Special Order: Brown, Bronze, Clay
Its simple, really. You want a door that looks good, works and seals well, holds up to use and weather abuse, and is a good value. And with that in mind, theres an open and shut case for Marcos Weather-Tite Doors. Marcos AS series door models are all steel with an all steel frame, and and all steel 26 ga. skin. The panel is filled with polyurethane, creating an effective thermal break, and for rigidity, strength and insulation. The nylon non-collapsible lockset insert helps eliminate moisture which can cause swelling, shrinking, and lock loosening. And with its inner design, it puts the frame on the inside of the door for a quality, commercial appearance. When closed, the special rolled edge on Marcos Weather-Tite doors creates a flat surface top to bottom, side to side, for a real, dependable seal every time. The AS1, AS2, AS3, and CHAS3 feature a 3-1/2 frame width. The CHAS5 features a hefty 5 frame width, for maximum strength. All four? or five? AS models come with 16 Ga. prepainted finish over hot dipped galvanized steel. The economical A3 features a 3-1/2, .63 prefinished aluminum frame. All five door models have common header/ threshold, nailing and non-nailing jamb, and
skIN
3-1/2" Steel
1-1/4"
1-7/8"
1-7/8"
2-7/16"
loCkseT
Non-collapsible insert for sealing and security
1-7/8"
2-7/16"
WeAtheR StRip
Dual contact for a better seal
Options available: Windows, Deadbolt lockset, Door Closer, Double Door with astragal (no center post), 24 ga. skin
Weather-Tite Doors represent yet another Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the metal building industry.
U.S.: 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536 Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
MPC0910
AS 1
weatherTite As1
AS2
weather-Tite As2
Rolled edge creates dependable seal Dual contact weather strip All steel, 31/2 narrow profile frame Thermal break keeps hot and cold outside 4-way universal swing prevents jobsite change problems All steel 26 Gauge skin Full 1-3/4 thick panel Non-collapsible lockset insert Inner lock design for quality looks
Marcos AS2 is all steelwith an all steel frame, and all steel 26 Gauge skin. The 1-3/4 thick panel is filled with polyurethane to R-12 value for rigidity, strength and insulation. The AS2 features a 3-1/2 frame width (1 9/16 face on hinge side, 15/16 face on opposite side), with 16 Gauge pre-painted finish over hot dipped galvanized steel. The frame also has common header/threshold and nailing and non-nailing jamb and meets handicap specifications. Plus, the dual contact weather strip really seals the deal. The AS2 is available in whitespecial order brown, bronze, and clay. Other options include windows, deadbolt lockset, door closer, double door with astragal (no center post), and 24 Gauge skin. All steel frame The 3-1/2 (1 9/16 hinge side face; 15/16 opposite side face) all steel frame is all about strength, from its 16 Gauge pre-painted finished over hot dipped galvanized steel, to its common header/threshold and nailing and non-nailing jamb.
AS3
weatherTite As3
Rolled edge creates dependable seal Dual contact weather strip All steel, 3-1/2" frame Thermal break keeps hot and cold outside 4-way universal swing prevents jobsite change problems All steel 26 Gauge skin Full 1-3/4 thick panel Non-collapsible lockset insert Inner lock design for quality looks
A2
weatherTite A2
CHAs3 CHAs5
weatherTite CHAs3
weatherTite CHAs5
Rolled edge creates dependable seal Dual contact weather strip Aluminum, 5" wide frame (for 40 R.O.) Thermal break keeps hot and cold outside 4-way universal swing prevents jobsite change problems All steel 26 Gauge skin (also available in 24 Gauge) Full 1-3/4" thick panel Non-collapsible lockset insert Inner lock design for quality looks
Like the other doors in Marcos AS series, its all steelwith an all steel frame, and all steel 26 Gauge skin. The 1-3/4" thick panel is filled with polyurethane to R-12 value for rigidity, strength and insulation. The CHAS5 features a 5 frame width (1-7/8 face on hinge side, 2-7/16 face on opposite side), with 16 Gauge pre-painted finish over hot dipped galvanized steel. The frame also has common header/threshold and nailing and non-nailing jamb and meets handicap specifications. Plus, the dual contact weather strip really seals the deal. The CHAS5 is available in whitespecial order brown, bronze, and clay. Other options include windows, deadbolt lockset, door closer, double door with astragal (no center post), and 24 Gauge skin. All steel, extra wide frame, heavy duty door with special dependable-seal Rolled Edge. All steel frame The 5 (1-7/8 hinge side face; 2-7/16 opposite side face) all steel frame is all about strength, from its 16 Gauge pre-painted finished over hot dipped galvanized steel, to its common header/threshold and nailing and non-nailing jamb. It allows for a 40 wide R.O.
Rolled edge creates dependable seal Dual contact weather strip All steel, 3-1/2 narrow profile frame Thermal break keeps hot and cold outside 4-way universal swing prevents jobsite change problems All steel 26 Gauge skin Full 1-3/8 thick panel Non-collapsible lockset insert Inner lock design for quality looks
Marcos AS1 is all steelwith an all steel frame, and all steel 26 Gauge skin. The 1-3/8 thick panel is filled with polyurethane to R-9 value for rigidity, strength and insulation. The AS1 features a 3-1/2" frame width (1 9/16" face on hinge side, 15/16" face on opposite side), with 16 Gauge pre-painted finish over hot dipped galvanized steel. The frame also has common header/threshold and nailing and non-nailing jamb and meets handicap specifications. Plus, the dual contact weather strip really seals the deal. The AS1 is available in white with a special woodgrain paintable finish. Special order brown, bronze, and clay. Woodgrain is only available in 3/0 x 6/8 and smaller. Other options include windows, deadbolt lockset, door closer, double door with astragal (no center post), and 24 Gauge skin. All steel frame The 3-1/2" (1 9/16" hinge side face; 15/16" opposite side face) all steel frame is all about strength, from its 16 Gauge pre-painted finished over hot dipped galvanized steel, to its common header/threshold and nailing and non-nailing jamb.
Marcos AS3 is steelwith an all steel frame, and all steel 26 Gauge skin. The 1-3/4 thick panel is filled with polyurethane to R-12 value, creating an effective thermal break, and for rigidity, strength and insulation. The AS3 features a 3-1/2 frame width (1-7/8 face on hinge side; 2-7/16 face on opposite side), with 16 Gauge pre-painted finish over hot dipped galvanized steel. The frame also has common header/ threshold and nailing and non-nailing jamb and meets handicap specifications. Plus, the dual contact weather strip really seals the deal. The AS3 is available in whitespecial order brown, bronze, and clay. Other options include windows, deadbolt lockset, door closer, double door with astragal (no center post), and 24 Gauge skin. All steel frame The 3-1/2 (1-7/8 hinge side face; 2-7/16 opposite side face) all steel frame is all about strength, from its 16 Gauge pre-painted finished over hot dipped galvanized steel, to its common header/threshold and nailing and non-nailing jamb. It allows for a 40 wide R.O.
Rolled edge creates dependable seal Dual contact weather strip pre-finished, 31/2" narrow profile aluminum frame Thermal break keeps hot and cold outside 4-way universal swing prevents jobsite change problems Aluminum 26 Gauge skin Full 1-3/4" thick panel Non-collapsible lockset insert An economic choice
This economical door has an aluminum (.63) frame, and the 1-3/4" thick panel includes a steel 26 Gauge skin and is filled with polyurethane to R-12 value for rigidity, strength and insulation. The A2 features a 3-1/2" frame width (15/16" face on hinge side, 15/16 face on opposite side. The aluminum frame also has common header/ threshold and nailing and non-nailing jamb and meets handicap specifications. Plus, the dual contact weather strip really seals the deal. The A2 is available in mill finishspecial order white. Other options include windows, deadbolt lockset, door closer, double door with astragal (no center post), and 24 Gauge skin. Economical aluminum frame door with special dependable-seal Rolled Edge. Aluminum frame The 3-1/2 aluminum (.63) frame makes this a practical, economical choice, with common header/threshold and nailing and non-nailing jamb.
Rolled edge creates dependable seal Dual contact weather strip All steel, 31/2" wide frame (for 40 R.O.) Thermal break keeps hot and cold outside 4-way universal swing prevents jobsite change problems All steel 26 Gauge skin (also available in 24 Gauge) Full 1-3/4 thick panel Non-collapsible lockset insert Inner lock design for quality looks
Marcos CHAS3 is steelwith an all steel frame, and all steel 26 Gauge skin. The 1-3/4 thick panel is filled with polyurethane to R-12 value for rigidity, strength and insulation. The CHAS3 features a 3-1/2 frame width (1-7/8 face on hinge side; 2-7/16 face on opposite side), with 16 Gauge pre-painted finish over hot dipped galvanized steel. The frame also has common header/ threshold and nailing and non-nailing jamb and meets handicap specifications. Plus, the dual contact weather strip really seals the deal. The CHAS3 is available in whitespecial order brown, bronze, and clay. Other options include windows, deadbolt lockset, door closer, double door with astragal (no center post), and 24 Gauge skin. All steel frame The 3-1/2 (1-7/8 hinge side face; 2-7/16 opposite side face) all steel frame is all about strength, from its 16 Gauge pre-painted finished over hot dipped galvanized steel, to its common header/threshold and nailing and non-nailing jamb. It allows for a 40 wide R.O.
oUtSide
lH swING RH swING
oUtSide
lH swING
RH swING
lH swING
RH swING
lH swING
INsIDe
INsIDe
Proper ventilation is important to meet building codes, to reduce utility costs, and reduce longterm building damage. Flex-O-Vent provides plenty of cooling air flow.
/ long
lasting
flex-o-vent
FlEx-O-VEnT
Fasteners
anglekut
roof boots
Mastix
Weathertite Sealant/adheSive
Clips
Closure Foam
Specifications
Net Free Area .......................19 square inches per Linear Foot-ridge 1-1/2" x 3" x 10'....................Rib heights 11/4" and lower Air Permeability....................760 Cubic Feet per minute Cold Cracking.......................-55C (-130F) Snow Infiltration ..................0 Tear Strength .......................3.5 ppi Tensile Strength ...................16 psi Elongation 175%
Easy Installation
Flexible Design
Compressive Strength..........1.8 psi @ 75% Abrasion...............................No Damage 100 mpg Wind-driven Rain ..No Leakage Non-Profile Sensitive
Universal Fit
Flex-O-Vent represents yet another Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the building industry.
Marco Industries Corporate: 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573
MPC0311
How fitting .
Custom contours keep water out...bring air through.
Low Profile Ridge Vent For Agricultural, Commercial and Standing Seam Metal Panels
Specially formulated polyester has been manufactured from recycled material and is recyclable.
Lower, custom-fit profile Moisture and pest barrier Non-obtrusive appearance Reduces utility costs One-person, easy installation
For those looking for a ventilation system to provide the ultimate ventilation benefits at a cost lower than traditional fans, turbines, and louvers, the WEATHER-TITE LP2 RIDGE VENT removes heat and moisture, prevents rot, extends paint life, limits mold growth, ice damming, and reduces excessive heating and air conditioning costs. The product is made from the nonfabric-covered Python vent recycled material. This strong, durable, modified polyester is a non-woven, non-wicking, fiber-based matting. Its special cut contours are designed to provide a custom, low-profile fit for any pitch and most major metal roof profiles. These features add up to a superior net free ventilation area that still helps keep out moisture, pests, dust.
Custom contours
Plus, LP2 can be installed by just one person in two easy steps. In fact, the screw bed and industrial strength peel and stick adhesive pre-applied to LP2 makes this one of the easiest installations imaginable. The LP system improves attic ventilation, eliminates condensation, and is easy to install a fitting combination thats hard to beat.
BILLS LOW
ENERGY EFFICIENT PRODUCT
KEEP ENERGY
Net Free Area .......................Varies with profile based on 17 square inches per Linear Foot of ventilation material Dimensions vary with panel pitch Air Permeability....................>>760 Cubic Feet per minute Cold Cracking.......................-25 F Snow Infiltration ..................0 Tear & Tensile Strength ........Machine 25 ppi / Counter 25 ppi Compressive Strength..........1.8 psi @ 75% Abrasion...............................No Damage 100 mph Wind-driven Rain .....................................No Leakage
Specifications
LP2 represents yet another Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the building industry.
Marco Industries Corporate: 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536
MPC0910 U.S. Patent Number 7 ,594,363 Canadian Patent Number 2,503,414
Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
Staying power
High quality adhesive Joins metal to metal Seals around windows, doors, more Roll wont telescope from heat before installation Adhesive really holds hot metal panels
Marco Industries has created a high quality trimmable joint and end lap sealing tape that solves the adhesive failure problems associated with hot metal roofing and wall jobs. Mastixtape is made with a superior adhesive which is non-staining, permanently flexible, and stays in place during extreme heat. It seals around windows, doors, roof vents, stacks, access doors and other penetration points. The adhesive actually prevents the product roll from telescopinga common problem when other adhesives get too hot and cause a tape roll to start losing its shape. Which then causes the installer more handling problems and installation time. Then, once Weathertite Mastixtape is applied, it truly adheres to the metal roof panel and stays in position even on the hottest days. So you dont have to mess with a failing adhesive strip sliding down the hot metal roof before you can overlay the next roofing panel. Dont sweat your next metal roofing job. Choose Weathertite Mastixtape and get the job done easier and faster, even on the hottest days.
Choose the sealant that will stick around before and after installation.
T echnical Characteristics
Chemical Product and Company Identification Product Name: ...................... Mastix Butyl Tape Chemical Name:.................... Isobutylene Chemical Family: .................. Butyl Mixture Health Hazard: ....................... 0-Minimal Flammability Hazard: ............ 0-Minimal Reactivity Hazard: .................. 0-Minimal Hazardous Identification Based on data available to Marco Industries, none of the components in this product are considered hazardous according to OSHA Hazard communication Standard 29CFR 1910,1200. The Composition of this mixture is proprietary information. In the event of a medical emergency, compositional information will be provided to a physician or nurse. Fire Hazards Flash Point: ......................... >400F (204C) Method: ................................. Pensky Marten closed cup Extinguishing Media: ............ Dry chemical, Carbon dioxide, Foam, Water Special Fire-Fighting Procedures: ........................... Large quantities of water will extinguish. Do not enter confined space without proper protective equipment. Hazardous Combustion Products: ............................... Carbon monoxide. Carbon dioxide. Physical and Chemical Properties Volatile (WL)%:..................... 0 Solubility in Water:................ Insoluble Specific Gravity (H20=1): ..... 1.59-1.64 Evaporation Rate: .................. Not applicable Appearance: .......................... Soft, pliable gum Color: .................................... Q-126 Q-126BB Q-126-10 Odor: ..................................... None
Mastix represents yet another Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the building industry.
Marco Industries Corporate: 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536
MPC0910
Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
M-Clips
TM
A standing seam roof is only as reliable as the clips that hold it all together. Which is why Marco offers two types of clips made from premium, 22-gauge steel that will not fail under extreme heat, ice, rain or wind. Weve ensured that the utmost quality is in your handsour clips are completely free of burrs, preventing rust and other corrosion problems. Our clips are also inspected during the production process to guarantee all dimensions will match factory panel specifications. As opposed to thru-fastened roofs, standing seam roofs are made of spring joints that fasten panels together along their edges. Because standing seam roofs are designed to float and the fasteners are concealed, they do not leak. Our clips function in much the same waythey are hidden, fastened to the roof while the panel is pressed down onto the clip, locking it in place. Simple, effective and absolutely reliable. Whatever your standing seam roof requiressnap lock clips, fixed clips, slider assemblies, bearing plates or hidden hangers, we have you covered with the M-Clips roof clip system. Our Weather-Tite system keeps everything out of sight.
Our statistical process control system maintains all dimensions and met tolerances to ensure the utmost precision and quality. While our competitors lower grade steel clips may have burrs that cause leaks and rust, our M-clips are made from premium grade steel that are free of burrs. Be sure your project is Weather-Tite with Marcos M-clips.
TM
MECHANICAL SEAM
M-Clips Installation
STANDARD
SLIDER ASSEMBLY
MechanicalSeam
STANDARD
HEAVY DUTY
SnapLock
MechanicalSeam
Our fixed mechanical seam clips keep everything in placewith a slider assembly that can stand up to extreme wind stress. The slider assemblies for panels over 40 allow for thermal expansion between the panels during intense hot or cold temperatures. Heavy duty and UL-listed to withstand all types of environments, including excessive heat, ice and hurricane-force winds. MANUFACTURER PANEL NAME
Englert - A1300 Mechanical Seam Standard Englert - A1301 Mechanical Seam Special Englert - S2500 Mechanical Seam ESE - 1" Mechanical Seam ESE - 1-1/2" Mechanical Seam Knudson - P-2401 1.5" Mechanical Seam Knudson - VP-21 1" Mechanical Seam Knudson - VP-21 1.5" Mechanical Seam Knudson - KR-24 1.5" Mechanical Seam Knudson - KR-24 2" Mechanical Seam Metal Forming - 1" Mechanical Lock Metal Forming - 1.5" Mechanical Lock / Quadra Pro - TM Metal Forming - 2" Mechanical Lock / Quadra Pro - TM New Tech - SS100 Mechanical Seam New Tech - SS150 1.5" Mechanical Seam New Tech - SS200P - 2" Mechanical Seam New Tech - SS210A - 2" Mechanical Seam Roll Former - VS-150 1" Mechanical Seam Roll Former - VS-150 1-1/2" Mechanical Seam Roll Former - VS-150 1-1/2" Mechanical Seam Plus 50 Profile Zimmerman - SS-1000 1" Standing / Mechancial Seam Zimmerman - SS-1500 1-1/2" Standing / Mechanical Seam Zimmerman - SS-2000 2" Mechanical Seam Zimmerman - SS-2000A 2" Mechanical Seam
CLIP NAME
1-5/8" Fixed Clip 1-5/8" Fixed Clip 2-1/8" Fixed Clip - N 1-1/8" Fixed Clip 1-5/8" Fixed Clip 1-5/8" Fixed Clip 1-1/8" Fixed Clip 1-5/8" Fixed Clip 1-5/8" Fixed Clip 2-1/8" Fixed Clip - N 1-1/8" Fixed Clip 1-5/8" Fixed Clip 2-1/8" Fixed Clip 1-1/8" Fixed Clip 1-5/8" Fixed Clip 2-1/8" Fixed Clip - M 2-1/8" Fixed Clip - M 1-1/8" Fixed Clip 1-5/8" Fixed Clip 1-5/8" Fixed Clip 1-1/8" Fixed Clip 1-5/8" Fixed Clip 2-1/8" Fixed Clip - W 2-1/8" Fixed Clip - W
STANDARD
MRC-106 MRC-107 MRC-108 MRC-105 MRC-107 MRC-106 MRC-105 MRC-106 MRC-106 MRC-108 MRC-105 MRC-107 MRC-145 MRC-105 MRC-107 MRC-109 MRC-109 MRC-105 MRC-107 MRC-107 MRC-104 MRC-106 MRC-110 MRC-110
ALTERNATE
MRC-134 - Slider Assembly MRC-128 - Slider Assembly MRC-129 - Slider Assembly MRC-128 - Slider Assembly MRC-134 - Slider Assembly MRC-134 - Slider Assembly MRC-134 - Slider Assembly MRC-129 - Slider Assembly MRC-128 - Slider Assembly MRC-146 - Slider Assembly MRC-128 - Slider Assembly MRC-144 - Slider Assembly MRC-144 - Slider Assembly MRC-128 - Slider Assembly MRC-128 - Slider Assembly MRC-134 - Slider Assembly MRC-147 - Slider Assembly MRC-147 - Slider Assembly
GAUGES
24 24 24 / 22 24 24 24 24 24 24 24 / 22 24 24 24 / 22 24 24 24 / 22 24 / 22 24 24 24 24 24 / 22 24 / 22
SLIDER ASSEMBLY
STANDARD
3 CORPORATE 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536 CANADA 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
SnapLock
Our hard-working snap lock clips make attaching roof panels a snap. Use Marco screws to secure and simply snap your roof into place. Heavy-duty or UL-listed to withstand all types of environments, including excessive heat, ice and hurricane-force winds. MANUFACTURER PANEL NAME
Englert - A1000 Snap Lock Englert - A1100 Snap Lock Englert - A1500 Snap Lock Englert - S2000 Snap Lock Metal Forming - 1" Snap Seam / Quadra Pro - TM Metal Forming - 1.5" Snap Seam / Quadra Pro - TM Metal Forming - 1.75" Snap Seam / Quadra Pro - TM New Tech - SS450SL - 1-1/2" Snap Lock New Tech - SS675 - 1-3/4" Snap Lock Roll Former - SLP-175 Snap Lock Roll Former - VS-150 1-1/2" Snap Lock Roll Former - Staylock 1" Snap Lock Roll Former - Staylock 1-1/2" Snap Lock Zimmerman - SL-1000 1" Snap Lock Zimmerman - SLC-1000 1" Snap Lock Convertible Zimmerman - SLC-1500 1.5" SnapLock Convertible Zimmerman - SL-1500 Heavy Duty 1-1/2" Snap Lock Zimmerman - SL-1750 1-3/4" Snap Lock
CLIP NAME
1-1/2" Snap Lock Clip 1-1/4" Snap Lock Clip 1-3/4" Snap Lock Clip 1-3/4" Snap Lock Clip 1" Snap Lock Clip - Heavy Duty 1-1/2" Snap Lock Clip 1-3/4" Snap Lock Clip 1-3/4" Snap Lock Clip 1-3/4" Snap Lock Clip 1-1/4" Snap Lock Clip 1" Snap Lock Clip - Light Gage 1-1/2" Snap Lock Clip 100 SLZ - Snap Lock Has a nail strip. Does not use a roof clip. Has a nail strip. Does not use a roof clip. 100 SLZ - Snap Lock 1-3/4" Snap Lock Clip
STANDARD
MRC-127 MRC-102 MRC-100 MRC-100 MRC-130 MRC-112 MRC-101 MRC-148 MRC-101 MRC-101 MRC-102 MRC-140 MRC-141 MRC-103 NA NA MRC-103 MRC-101
ALTERNATE
MRC-113 - Heavy Duty 3-1/2" Base MRC-113 - Heavy Duty 3-1/2" Base MRC-115 - Heavy Duty 3-1/2" Base MRC-143 - 22 gage Economy 2" Base MRC-114 Heavy Duty 3-1/2" Base MRC-114 - Heavy Duty 3-1/2" Base MRC-114 - Heavy Duty 3-1/2" Base MRC-114 - Heavy Duty 3-1/2" Base
GAUGES
24 24 18 18 18 18 / 22 18 18 18 24 24 24 24 NA NA 24 18
GutterHangers
Our hangers are much stronger than most hangers on the market because of the unique double strengthening adhesive bead which wraps around the back and front of the hanger. SIZE
5" Hidden Hanger Aluminum 5" Hidden Hanger Steel 6" Hidden Hanger Aluminum 6" Hidden Hanger Steel
INSTALLATION DIAGRAM
GUTTER HANGER
available in both 7 and 8 SizeS in aluminum and Steel
BearingPlate
Available in multiple gauges and sizes, our bearing plate secures a foam base between substrate and metal. SIZE
3x3 Bearing Plate 4x4 Bearing Plate 3x4 Bearing Plate 5x5 Bearing Plate 6x6 Bearing Plate
INSTALLATION DIAGRAM
Clip
BEARING PLATE
bearing plate foam baSe roof SubStrate 5 CORPORATE 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536 CANADA 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
Ordering M-clips?
ClipScrews
Standard clip screws have regular profile heads. When those regular clip screws dont fasten tight, it can cause dimpled roof panels and result in serious loose panel problems. Problem solved with Marcos low profile clip screws available in both QuikGrip and QuikDrill with heads that are 50% lower than standard clip screws. QuikGrip and QuikDrill ClipScrews have a deep thread that pulls the fastener tighter and resists pullout better. And with the 17pt special thread design, youll get an even quicker drill or grip on 24 and 26 ga. metal.
For a low profile clip screw that causes absolutely no canning or telescoping which can add a wavy appearance to your standing seam roof choose Marcos UltraLo clip screw. UltraLos head is 75% lower than a standard clip screw. It is also designed with an aggressive double lead thread for faster installation. Available in a regular Phillips #2 head or a Phillips/ Square Diamond combo head, a 17 pt., and TripleGuard Gold coating, this heavy duty clip screw is made to last.
To make sure that your standing seam roof is truly Weather-Tite, make sure to ventilate the ridgecap with LP2 a durable, non-woven, and non-wicking custom profile ridge vent that is flame and tear resistant.
Custom contours fit any pitch, all major metal roof profiles, for either ridge cap application or roof-to-wall applications. LP2 creates a low-profile look and a seal that helps keep out moisture. Python is a single-layer, non-fabric-covered ridge vent re-cycled material made from siliconecoated fibers that prohibit clogging. This strong, durable, modified polyester allows the greatest air flow in and out of the attic. The special cut contours plus a 2 Marco closure create an incredible WEATHER TITE seal to help keep out moisture, insects, dust, and plant materials.
M-CLIPS
fLEx-O-vENT LP2
Flexible Foam Ridge Vent as universal ridge vent Low Profile Vented Closure as ridge vent
x-SEAL
Expandable Foam Tape
ANGLEKUT
ROOf BOOTS
Pipe Flashing
TITEBONd SEALANT
Durable & flexible
MASTIx
Butyl Tape
RE2
CLOSURE fOAM
QUIKdRILL
Metal to metal fastener
SILL-RITE
Multi-use sill plate sealer provides a long-lasting seal
WEATHER-TITE dOORS
Rolled Edge, Reliable Seal (5 models)
For nearly twenty years, Marco Industries has been delivering award-winning products to the metal building industry that offer easy installation, remarkable building ventilation, lower utility costs, extreme durability, and outstanding warranties...products that are economically and ecologically smart. Choose Marco for Everything You Need To Make Your Structure Weather-Tite.
M-clips represent yet another Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the building industry.
MADE IN USA
Marco Industries Corporate: 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536 050 Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
50-year
limited
warranty
APPROVED
breathe .
Helping structures
And builders breathe easier.
For ALL roof applications Under roofing, under hip/ridge shingles, and as an exhaust/intake fascia vent Keeps attics cooler in summer, dryer in winter Helps reduce utility costs Non-wicking, helps keep out insects, dust, moisture Durable, made from recycled plastic
Good air in. Bad air out. Just like you, buildings do better if they breathe properly. Which requires good ventilation. Thats exactly what Marcos Python Ridge Vent doeshelps ventilate buildings better. Python is a single-layer ridge vent which is not fabric covered and comes in a coil. Its a strong, durable, modified polyester and can be used under ridge caps, under ridge shingles, and as a fascia vent. Pythons non-woven, non-wicking, fiber-based matting has no external baffle, so dirt and snow trapping is greatly reduced. It helps keep out insects, dust, and moisture. As fascia vent, it helps eliminate mold build-up. Yet, with a properly balanced attic ventilation design to meet code, Python allows fresh air to be drawn into the attic and allows hot or stale air from inside to be drawn out through the ridge vent. The result? A cooler attic in summer and a drier attic in winter. That kind of ventilation helps reduce utility costs. Plus, Python is made from recycled plastic, so builders can be confident theyre using a green building product. Python is light and flexible, so its easy to handle and to install. And you can use every piece, so theres virtually no waste. Of course, builders want to know what type of buildings theyre limited to with Python. The answer: Python is for use with all roof applications. And with many sizes availableincluding for just about any fascia, you can take advantage of all of Pythons building benefits on almost any building project. So, with Python, youre building with a recycled product that helps reduce utility costs by drawing cooler air in and pulling stale air out. Theres no complicated fitting or wrapping, making it fast and easy to install. Its economical. And its extremely durable and weather resistant. That should make youand your buildingbreathe a lot easier. Compliments of Python.
Low profile.
Python is a single-layer ridge vent in a coil. Its low profile helps prevent puckering or buckling under the ridge cap.
MADE IN THE USA
Easy to handle, easy to install. Its light, flexible and theres no difficult fitting or wrapping. Multi-use, and with all roof applications. Python can be used under roofing, under hip/ridge shingles, and as an exhaust/intake fascia vent...no matter what roof is on your building. No fabric wrap, no external baffle. Nothing to cause clogging, deterioration, or dirt and snow trapping. Yet, Python helps keep out insects, dust, and moisture.
Strong and durable. Python is non-woven, non-wicking and resists damage from ice, hail, and other weather, which means fewer warping and loosening problems. And, it helps to prevent corrosion, rust, and brittleness. Economical Pythons flexibility means theres no shipping or installation crack or dent damage. Theres no waste with Pythonyou can use every piece. And its durability means it lasts for a long time. A green product for todays building projects. Made from more than 90% recycled plastic material (more than 30% post consumer content). And since Python can help draw cool air into the attic and hot air out in summer, it can help reduce utility costs.
Part No. PY-3000-50N PY-6000-50N PY-8000-50N PY-8000-20N PY-1050-20N PY-1175-20N PY-3410-20N PY-3480-20N
Nails (2 Pack) / 2 bags of nails 2 bags of nails 2 bags of nails 1 bag of nails 1 bag of nails 1 bag of nails 1 bag of nails 1 bag of nails
Air Permeability............................... ASTM D737 ...................760 cu. ft. per minute Tear and Tensile Strength ................ ASTM D129486 ............Tear: Machine 25 p.p.i. Counter 25 p.p.i. ASTM D226183 ............Tensile: Machine 25 p.p.i. Counter 25 p.p.i. Self-Ignition Temperature................ ASTM D1929 .................963 F. Cold Crack Resistance .................... GLIT C115 .....................25 F. Snow Infiltration ............................. CRL 5704 ......................0 Net Free Area for 3/4: 18 sq. in. per lin. ft. Net Free Area for 1: 19.4 sq. in per lin. ft.
Composition and Materials: UV stable, polyester composite. Maintenance: Properly installed, is maintenance-free. Color: Dark Grey Installation: Easily installed without special tools. Joints can be simply cut square, butted and caulked without connectors of fables. Wont dent, crack, or rust, and has no sharp edges. Is flexible, easy-to-handle and transport, and conforms to any roof pitch from 2/12 to 20/12. Must be installed with soffit vents to meet HVI recommendations. Air flow is unrestricted by any fabric covering. Patent pending. Dade County approved.
APPROVED
Python represents yet another Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the building industry.
Marco Industries Corporate: 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536
MPC0910
Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
F A M I LY
OF
FAST ENERS
PAINT + TESTING
PaintingOptions
MATCHTECH
The worlds best fasteners now in any color, any time.
MatchTech is Marco Industries state-of-the- art, high quality polyurethane paint for all of your fastener needs. MatchTech uses Imron 6000 from DuPont. Due to the added amount of polyurethane in Imron 6000, it produces a rubber-based material which eliminates chipping, especially when lobe sockets are used. QUALITY: Offers unsurpassed durability and chemical resistance. CONSISTENCY: High quality coating makes your fasteners last, and keeps you coming back for more. LIMITLESS POSSIBILITIES: There are endless color possibilities with this state of the art color system. QUICK: Non-standard color matches can be produced within a 24 to 48 hour turn around using our in house color eye computer station.
POLYURETHANE
POWDER COAT
Crimped washer heads show polyurethanes superior durability while powder coating can chip and flake.
TestingLaboratory
Marco Industries and Sherry Laboratories
Marco Industries has partnered with Sherry Laboratories for product testing and validation. Marcos partnership with Sherry Laboratories ensures that all products can withstand the most brutal elements in the harshest climates North America has to offer. Sherry Laboratories has built a reputation as an industry leader in the field of metallurgical testing by meeting and exceeding customers expectations for accuracy and time requirements for more than 60 years. Sherry Holdings LLC is five premier testing companies combining to provide uniquely accredited testing, technical expertise and services of superior quality through eight testing facilities. Founded in 1947, Sherry has been adding value to Marco Industries by providing efficient, timely and responsive testing services. Few laboratories around the world carry the range of professional accreditations and approvals enjoyed by Sherry Laboratories. Sherrys metallurgical laboratories have been accredited through Nadcap and the American Association of Laboratory Accreditation (A2LA). They also meet the requirements of ISO 17025, and the general requirements for the Competence of Calibration and Testing Laboratories for Mechanical, Chemical and Fastener testing as outlined in the Fastener Quality Act (FQA). OEMs, fabricators and end users rely on Sherry Laboratories to test their metals, exotic alloys and polymers in accordance with standards set forth by a number of organizations, including the American Society for Testing and Materials (ASTM), American Society of Mechanical Engineers (ASME), American Petroleum Institute (API), American Welding Society (AWS), American Association of State Highway and Transportation Officials (AASHTO), Federal, Military or individual customer specifications.
3 CORPORATE 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536 CANADA 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
METAL2WOOD + METAL2WOOD-HD
The Metal2Wood fastener is designed to attach steel roofing and siding used in post-frame and residential metal roofing applications. The high hex washer head provides driving stability, its HiLo threads make for superior holding strength, and the Type 17 point allows for quick installation. The bonded seal washer creates a truly Weather-Tite seal even when driven at an angle.
STANDARD
OPTIONAL
Type 17 point drills with no point walking, reducing metal shavings that can become embedded in the rubber washer.
SIZE
10 x 1" 10 x 1-1/2" 10 x 2" 10 x 2-1/2" 10 x 3" 12 x 3/4" STITCH
HEAD
1/4" HWH 1/4" HWH 1/4" HWH 1/4" HWH 1/4" HWH 1/4" HWH
CARTON QTY
2500 2500 2000 1500 1000 5000
WEIGHT/M
8.25 10.321 12.495 15.068 16.867 10.587
WASHER SIZES
#10 HiLo ID .214" OD .470"
The Metal2Wood HD is your rescue screw. It can replace nails or fasteners that have loosened and backed out of metal roofing and siding. The EPDM rubber is vulcanized to the steel washer to prevent delaminating to form an excellent seal - even when driven at an angle. The 5/16" HWH with bonded sealing washer will cover the existing hole entirely, creating a watertight seal, even if stretched out by movement of the
metal roof. The mechanical zinc plating provides extended corrosion resistance.
STANDARD
OPTIONAL
SIZE
14 x 1" 14 x 1-1/2" 14 x 2"
HEAD
5/16" HWH 5/16" HWH 5/16" HWH
CARTON QTY
2500 2000 1500
WEIGHT/M
8.25 10.321 12.495
WASHER SIZES
#10 HiLo ID .275" OD .590"
TRIPLEGUARD
4
MATCHTECH
SURESHIELD
ELECTROPLATE
PO I NT D I A M ETE R 25 TYPE 17
M S U B S T R AT E SE T A L S
DESIGNATION
M AT E R I A L
AZ55 GALVALUME 29 .015 379 422 26 .019 630 655 24 .024 723 795
PO I NT D I A M ETE R 30 TYPE 17
M S U B S T R AT E SE T A L S
OAK 1" -
DESIGNATION
M AT E R I A L
AZ55 GALVALUME 29 .015 493 493 26 .019 781 721 24 .024 1079 1042 22 .032 1352 1196 G-90 GALVANIZED 20 .038 1609 1420
5 CORPORATE 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536 CANADA 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
REZISTOR + REZISTOR3
ReZistor is designed to fasten steel sheeting to wood, plywood, or OSB. It is used in post frame and residential construction. The 5/16" cupped HWH with molded zinc-aluminum alloy provides protection against red rust on the head and washer. The Zinc Alloy Cap head provides more strength than common alloys.
The Type 17 point and transition threads generate greater holding strength and superior drill speed in various wood substrates.
ReZistor is an excellent choice for Galvalume and other long-life metal roof panels, and has a 40-year warranty available upon request.
STANDARD
OPTIONAL
SIZE
10 x 1" 10 x 1-1/2" 10 x 2" 10 x 3" 12 x 3/4" STITCH
HEAD
5/16" CHWH 5/16" CHWH 5/16" CHWH 5/16" CHWH 5/16" CHWH
CARTON QTY
2500 2500 2000 1000 2500
WEIGHT/M
13.006 15.904 17.326 22.124 9.065
WASHER SIZES
#10 HiLo Zinc Alloy Cap ID 3mm OD 11mm THICKNESS
ReZistor3 is a smaller, cupped HWH that provides an attractive low-profile appearance versus large HWH fasteners. Intended as an alternative to the zinc-aluminum alloy head. It is also used to fasten steel roofing in postframe and residential construction projects. ReZistor3 is an excellent choice for Galvalume or other long-life metal roofs.
With a 40-year warranty available upon request ReZistor3s stainless steel cap will never produce red rust.
STANDARD
OPTIONAL
SIZE
10 x 1" 10 x 1-1/2"
HEAD
1/4" HWH 1/4" HWH
CARTON QTY
3000 2500
WEIGHT/M
9.4 11.0
WASHER SIZES
#10 HiLo ID 3mm OD 9mm THICKNESS
TRIPLEGUARD
6
MATCHTECH
SURESHIELD
ELECTROPLATE
PO I NT D I A M ETE R 25 TYPE 17
M S U B S T R AT E SE T A L S
DESIGNATION
M AT E R I A L
AZ55 GALVALUME 29 .015 655 26 .019 1025
PO I NT D I A M ETE R 30 TYPE 17
M S U B S T R AT E SE T A L S
DESIGNATION
M AT E R I A L
AZ55 GALVALUME 26 .019 724
7 CORPORATE 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536 CANADA 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
LOPRO + 300SS
LoPro
LoPro provides a quality, low profile appearance on sidewall applications installed into wood girts. With a round head with 6-lobe recessed driver, LoPro is specially designed to fit the 6-lobe recess with no paint damage. The undercut EPDM rubber washer provides a secure seal even when driven at an angle.
Type 17 point quickly penetrates steel siding and reduces metal shavings that can become embedded in rubber washer.
STANDARD
LoPro comes with yellow dichromate plating
OPTIONAL
SIZE
10 x 1-1/2"
HEAD
TRUSS
CARTON QTY
2500
WEIGHT/M
10.1
WASHER SIZES
#10 T-25 HiLo ID 2mm OD 8.5mm THICKNESS
The 300ss stainless steel HWH and bonded washer provide protection even in the harshest environments. The HWH design holds the EPDM rubber washer to provide a protected seal, even when driven at an angle. 300ss is an excellent choice for use in aluminum liner panel applications, but can also function well for animal confinement structures.
The type A point will tap a pre-drilled hole in steel, or will self-drill through aluminum lines panels.
STANDARD
300ss comes with stainless steel plating
OPTIONAL
SIZE
9 x 1" 9 x 1-1/2"
HEAD
1/4" HWH 1/4" HWH
CARTON QTY
5000 2500
WEIGHT/M
7.9 9.9
WASHER SIZES
#9 ID 2mm OD 10mm THICKNESS
TRIPLEGUARD
8
MATCHTECH
SURESHIELD
ELECTROPLATE
PO I NT D I A M ETE R 25 TYPE 17
M S U B S T R AT E SE T A L S
DESIGNATION
M AT E R I A L
AZ55 GALVALUME 29 .015 690 26 .019 877
PO I NT D I A M ETE R 25 TYPE 17
M S U B S T R AT E SE T A L S
DESIGNATION
M AT E R I A L
AZ55 GALVALUME 29 .015 685 26 .019 869
9 CORPORATE 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536 CANADA 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
CLIPSCREWS + ULTRALO
ClipScrews
Marcos ClipScrews are designed to attach standing seam roof clips to plywood, OSB, or wood purlins. ClipScrews are designed with a unique head style and configuration to provide superior hold. Material and plating options meet performance requirements to secure roof clips while providing long lasting quality. ClipScrews are engineered with an installation combo drive control for uniform installation performance.
STANDARD
OPTIONAL
SIZE
10 x 1" 10 x 1-1/2"
HEAD STYLE
#2 Phillips Square Pancake #2 Phillips Square Pancake
CARTON QTY
5000 2500
WEIGHT/M
6.776 9.268
ClipScrews
UltraLo is designed to attach standing seam roof clips to Plywood, OSB, or wood purlins. This ultra thin wafer head is designed for standing seam panels that utilize no clip but require a thin head so as to not dimple the roof panel. This ultra low style head also provides exceptional pull over strength.
STANDARD
OPTIONAL
SIZE
10 x 1-1/8" 10 x 2 10 x 3
HEAD STYLE
#2 Phillips Square Wafer #2 Phillips Square Wafer #2 Phillips Square Wafer
CARTON QTY
5000 2500 2000
WEIGHT/M
6.776 9.268 6.141
TRIPLEGUARD
10
MATCHTECH
SURESHIELD
ELECTROPLATE
PO I NT D I A M ETE R 28 TYPE 17
M S U B S T R AT E SE T A L S
OAK 1" -
DESIGNATION
M AT E R I A L
AZ55 GALVALUME 29 .015 529 26 .019 778 24 .024 1128 22 .032 1512
PO I NT D I A M ETE R 35 SHARP
M S U B S T R AT E SE T A L S
DESIGNATION
M AT E R I A L
AZ55 GALVALUME 29 .015 685 26 .019 24 .024 22 .032 -
11 CORPORATE 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536 CANADA 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
Marco offers a full range of carbon steel and stainless steel self-tapping screws. Available to meet all your fastener requirements for wood and light gauge metal with a pre-drilled hole.
STANDARD
OPTIONAL
SIZE
14 x 3/4"
AB B A
HEAD STYLE
3/8" HWH 3/8" HWH 3/8" HWH 3/8" HWH 3/8" HWH 3/8" HWH 3/8" HWH 3/8" HWH 3/8" HWH 3/8" HWH 3/8" HWH
CARTON QTY
2000 2000 2000 1500 1000 1000 1000 2000 2000 2000 2000
WEIGHT/M
12.62 16.91 17.63 24.60 26.02 30.80 35.91 12.62 14.02 18.00 22.03
14 x 1" 14 x 1-1/4" 14 x 1-1/2" 14 x 2" 14 x 2-1/2" 14 x 3" 1/4 x 3/4" AB 17 x 3/4" AB 17 x 1" AB 17 x 1-1/4" AB
S U B S T R AT E S
HRS PRIME ONLY 16 / .065 806 1411 14 / .07 1252 1432 12 / .106 2020 2150
DESIGNATION
M AT E R I A L
AZ55 GALVALUME 29 .015 559 26 .019 892 24 .024 1200 22 .032 1275 G-90 GALVANIZED 20 .038 1610
TRIPLEGUARD
12
MATCHTECH
SURESHIELD
ELECTROPLATE
FastenerSelection
POINT TYPE A NOMINAL DIAMETER & ALLOY SIZE
#10 #12 #14 #14 304 SS
INCHES
.190" .210" .250" .250"
NOTES
Drill bit sizes are for new construction applications Drill bit sizes are for new construction applications Drill bit sizes are for new construction applications Requires 600-800 rpm screw gun
9/64" 9/64" #8 #8
AB
SIZE
#12 1/4" #17 1/4" 304 SS #17 304 SS
INCHES
.210" .240" .285"
NOTES
Drill bit sizes are for new construction applications Drill bit sizes are for new construction applications Repair screw for stripped 1/4" 11 ga. steel Requires 600-800 rpm screw gun Requires 600-800 rpm screw gun / Repair screw for stripped 1/4" 11 ga. steel
.010
.020
.030
.050
.060
.080
.090
.130
.120
.040
.070
.140
SIZE
#12 1/4" 1/4 304 SS
INCHES
.210" .240"
NOTES
Drill bit sizes are for new construction applications Drill bit sizes are for new construction applications Requires 600-800 rpm screw gun
.010
.020
.030
.120
.040
.050
.060
.070
.080
.090
.130
.100
.110
.140
.150
11/64" #7 #7
3/16" #1 #1
All screws listed other than 304 Stainless Steel are carbon steel with zinc plating.
CORPORATE 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536 CANADA 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
.160
.160
.100
.150
.110
PlatingOptions
SURESHIELD
Standard mechanical plating
Marcos standard plating is 1 mil of mechanical plating. This provides all our fasteners with maximum plating protection. Salt spray tests for our standard SureShield plated fasteners exceed 1,000 salt spray hours. Our mechanical plating eliminates all hydrogen embrittlement. MARCOS FASTENER SALT SPRAY TEST RESULTS AVAILABLE UPON REQUEST.
ELECTROPLATE
Marcos electroplating technology.
Marco uses .005 electroplating for all fasteners, with the option to add additional coatings as well. This provides excellent salt spray and Kesternich ratings. Electroplating also provides good lubricity and wear resistance for both the QuikGrip and QuikDrill fastener families. MARCOS FASTENER SALT SPRAY TEST RESULTS AVAILABLE UPON REQUEST.
CoatingOptions
TRIPLEGUARD
The one coating with three times the protection.
Extend the life of your fasteners by choosing Marco TripleGuard. This fastener coating combines an electroplated zinc and chromate substrate with an organic topcoat. The electroplated zinc layer provides sacrificial protection of the steel substrate while the topcoat creates a durable barrier. TripleGuard is engineered to provide extended field life and improve the mechanical performance of fasteners. It is also engineered with integrated friction modifiers to eliminate the need for sealers or post-coating lubricants. TripleGuard provides superior product performance in fewer layers than comparable finishes. Fewer processing steps result in improved quality and reduced cost.
14
FastenerTerms
TENSIONSTRENGTH
The point at which a fastener fails under a load exerted in two direct and opposite directions. Fastener tension is created when a fastener elongates during tightening, producing the clamp load that prevents movement between joint members. Such movement is arguably the most common cause of structural joint failures.
TORSIONSTRENGTH
With Torsion testing, we are able to simulate real life service conditions, check product quality, and ensure proper manufacturing techniques. Torsion tests are performed by applying rotational forces or by applying both compression and rotational forces. Types of torsion testing vary from product to product but can usually be classified as failure, proof, or product operation testing.
SHEARSTRENGTH
Shear is accomplished by exerting shear force (pressure) in the crosswise surface of the fastener until shear failure occurs. Shear force causes the two adjacent portions of the fastener to slide in opposite directions parallel to their contact surface.
PULLOUTPERFORMANCE
Pullout is the capacity of a fasteners thread connection with a particular medium to remain intact and resist being pulled out of the medium.
PULLOVERPERFORMANCE
Pullover performance relates to the capacity of a fastener to resist the pulling of the fastened sheet material over the head of the fastener. The resistance to pullover is related to the strength and diameter of the fastener washer as well as the strength and thickness of the metal panel used.
15 CORPORATE 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536 CANADA 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
CORPORATE 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536 CANADA 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
Remove the re-roofing danger, expense, and hassle of wood firring with RE2.
TM
flex-o-vent
Fasteners
anglekut x-seal
lp2
anglekut
roof boots
Mastix
Weathertite Sealant/adheSive
RE2
CloSuRE FoaM
Test Method
Value
3.8 < 30 58 30 86 60 11 17 1.51.9 < 0.1 < 5% None < 2 sec. 1.0 x 10^9 1.0 x 10^12 0.350.42 1.301.60
Typical application
Provides ventilation
Contact Corrosivity (Alum. Plate) Static Decay (anti-static grade) Surface Resistivity (anti-static grade) Thermal Conductivity k-value (BTU-IN / HR-FT2-F) Thermal Resistance R Value (HR-FT2-F / BTU
RE2 represents yet another Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the building industry.
Marco Industries Corporate: 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536
MPC0311
Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
RoofBoots
Flexible base forms seal with most panels
Customizable, flexible sleeves that form a seal around pipes on all roofing surfaces
EPDM or Silicone sleeve accommodates expansion/contraction Lots of sizes and color choices 20-year warranty 35-year warranty available
20 yEar
waRRanty
RoofBoots are made with clearly marked sleeves which can be cut on-site to easily customize and precisely fit the pipe diameter you need. The sleeves come in EPDM 500 and Siliconedesigned for the maximum resistance to weathering due to ozone and ultraviolet light. The base on RoofBoots is flexible and designed to form a seal on all types of roofing surfaces (including metal, plastic, tile,
and more), and on almost any panel configuration and roof pitch, regardless of the pipe location. So installation is simple: choose the pipe opening and trim the sleeve, slide the boot over the pipe, form to the roof profile, apply sealant, and fasten to complete the installation. You can also choose from round or square base, from Marcos full selection of wraparound retrofit and solar boots, many sizes, and several color choices.
Step-by-step installation
Apply sealant
Slide the boot over the pipe and form to the roof profile
Fasten to roof
Installation complete
9 sizes / 10 colors
Bright Red
[See chart on following page for specific size information and availability]
2.77" - 75.25"
Gray
Light Blue
Terra Cotta
Black
White
[See chart on following page for specific size information and availability]
Light Green
Brown
silicone RoofBoots engineeRing Astm d2000 m4 Ge 505 A19 b37 c12 f19 G11 z1 z2 z3 z4 gRade 4 type G cLAss e 5 05 A19 General tes temp 225c Volume swell max 80% 50 durometer (range) tensile 5 mpa (minimum 725 psi) Heat Aging 70 hrs @ 225c change in Hardness max +10 pts change in tensile max -30% change in ultimate elongation max -30% compression set 22 hrs @ 175c max 50% Astm d395b Ozone Resistance 70 hrs @ 50pphm Astm d1171 Low temperature brittleness 3 min @ -55c pass Astm d2137 A, 9, 3, 2 tear Resistance, Astm d-624, die b 55 durometer (specific target) silicone (specific elastomer) Horizontal flame Resistance, uL 94 not to exceed 3"/min Ozone Resistance Advanced Requirement 70 hrs @ 500pphm @ 100 f
Specification Data
ADVANCED OZONE RESISTANCE tested HIGH TEMPERATURE RESISTANCE Tested to: intermittent Tested to: continuous Solar: Tested to: intermittent Solar: Tested to: continuous LOW TEMPERATURE RESISTANCE tested Solar Low Temp TENSILE SET maximum COMPRESSION SET maximum EPDM 500 70 hours @ 500 pphm +100C (+275F) +225C (+437F) +135C (+275F) +100C (+212F) -55C (-65F) -50C (-67F) 10 MPa (1450 psi) 25% SILICONE 70 hours @ 500 pphm +135C (+275F) +260C (+500F) +260C (+500F) +225C (+437F) -74C (-100F) -74C (-101F) 5 MP1 (700 psi) 50%
Complete specification data and testing methods are available upon request.
Sizing Chart
Check diameter of pipe. Select the appropriate RoofBooTS product for pipe or duct diameter. For extreme pitch or surface irregularity select next larger size. Choose the compound required, then refer to the part number for the RoofBooTS product desired.
pipe Range #1 #2 #3 #4 #5 #6 #7 #8 #9 1/4"2 1/2" (6.3563.5) 1 3/4"3" (44.576.2 mm) 1/4"5" (6.35127 mm) 3"6 1/4" (76.2158.8 mm) 4 1/47 3/4" (108196.9 mm) 5"9" (127228.6 mm) 6"11" (152.4279.4 mm) 7"13" (177.8330.2 mm) 9"19" (228.6482.6 mm)
compound Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone
paRt # RD101BE RD101GG RD101RG RD201BE RD201GG RD202RG RD301BE RD301GG RD302RG RD401BE RD401GG RD402RG RD501BE RD501GG RD502RG RD601BE RD601GG RD602RG RD701BE RD701GG RD702RG RD801BE RD801GG RD802RG RD901BE RD901GG RD902RG
flashing details A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter Closed 2.77" (70.4 mm) 4.75" (120.7mm) 1.44" (36.6 mm) 3.35" (89.7 mm) 6.21" (157.7 mm) Closed 3.64" (92.5 mm) 7.74" (196.6 mm) 2.38" (60.5 mm) 5.05" (128.3 mm) 9.26" (235.2 mm) 3.50" (88.9 mm) 4.43" (112.5 mm) 10.75" (273.1.7 mm) 4.25" (108 mm) 5.60" (142.2 mm) 12.50" (317.5 mm) 4.90" (124.5 mm) 5.84" (148.3 mm) 14.60" (370.8 mm) 5.80" (147.3 mm) 7.53" (191.3 mm) 16.5" (419.1 mm) 7.45" (189.2 mm) 8.09" (205.5 mm) 75.25" (641.4 mm)
pipe Range Min. 1/8"3/4" (320 mm) #1 #2 #3 #4 #5 #6 #7 #8 #9 1/4"2" (650 mm) 1 1/4"3" (3276 mm) 1/4"4" (6102 mm) 3"6" (76152 mm) 4"7" (102178 mm) 5"9" (127228 mm) 6"11" (152280 mm) 7"13" (178330 mm) 10"18" (254467 mm)
compound Black EPDM Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone
paRt # SQ051BA SQ101BA SQ101GA SQ101RA SQ201BA SQ201GA SQ202RA SQ301BA SQ301GA SQ302RA SQ401BA SQ401GA SQ402RA SQ501BA SQ501GA SQ502RA SQ601BA SQ601GA SQ602RA RD701BE RD701GG RD702RG SQ801BA SQ801GA SQ802RA SQ901BA SQ901GA SQ902RA SQ951BA SQ951GA SQ952RA
flashing details A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter 1/16" 1/8"3/4" 2 1/4" Closed 1/4"2" 4 1/4" 7/8" 1 1/4"3" 6" Closed 1/44" 8" 2 1/2" 3"6" 10" 3 1/2" 4"7" 11" 4" 5"9" 12" 5" 6"11" 14" 6" 7"13" 17" 8 1/2" 10"18" 25" 11" 13"26" 34"
Steep Slope
Specifically designed for the metal roof industry, for applications with a 35 to 65 degree angle, while accepting and responding to the most commonly encountered pipe penetrations. The built in 40 pitch allow the Extreme Angle Master Flash to handle any extreme roof pitch, sleeve flexibility accommodates vibration and pipe movement caused by expansion and contraction. Easy on site customization handles all normal installations, too. Fast, one piece construction allows for easy on-site installation in usually 5 minutes. Made of EPDM or Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light. The soft aluminum base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location. Steep Slopes flexible design meets virtually all roofing needs. Sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction. Steep Slope was used to create a new engineering standard for profiled roofing by the International Association of Plumbing and mechanical Officials (for the uniform Plumbing Code) and remains the only product listed. These products are also listed for use with Type B vents. The addition of fire retarding agents milled directly into the rubber compound created a self extinguishing feature which enables it to be used with Type B vents. Listed with IAPMO certification No. 3121.
pipe Range 1/4" - 5 3/4" compound Black EPDM Red Silicone paRt # MFEA101BA MFEAS102RA flashing details A Top opening diameter B Cut to suit pipe size C Base diameter Closed 1/4" - 5 3/4" (6 - 146mm) 11" (279mm)
STEEP SLoPE
STEEP SLoPE
Multiport is specifically designed for Solar and Electrical Applications 5 Port Design - One Design, Multiple Functions Accommodates: One 0" - 1-15/16" - (0 - 49mm) Pipe Two 3/8" (0.9525mm) pipe / cable Two 3/4" (20mm) pipe / cable
pipe 0"-1 5/16" compound Black EPDM Red Silicone paRt # MFMP MFMPS
4-1/2 (114mm) Base Up to 4 cables or wires per flashing Extra ports accommodate copper pipe/electrical cabling Easy install for solar applications
flashing details A Top opening diameter B Overall height C Base diameter 0" - 1 5/16" (0 - 49mm) 2 1/2" (63.5mm) 4 1/2" (114mm)
SoLar / MULTIPorT
titebond Roof sealant is specifically formulated to outperform all other sealant technologies, including silicones, tri-polymers, and polyurethanes. this superior polymer formula provides a waterproof seal against water, wind, dust and dirt. It offers exceptional adhesion to Kynar coated metal surfaces, plastics and glass. the product is ideal for use on a wide variety of metal roof, trim, architectural metal siding, aluminum, galvanized steel, galvanized gutters, flashing and downspouts. It also provides unbeatable adhesion to wood, brass and other common building substrates.
Quikdrill metal-to-metal fasteners and QuikGrip metal-to-wood fasteners are the bedrock of the marco Weather-tite system. Quikdrill and QuikGrip offers you the right fastener for all pre-engineered metal building applications any job, any size, any conditions, any environment. both fastener families feature fasteners with a higher crown to allow a better, tighter socket fit, and cupped head and HWH for improved pullover strength. mechanical plating is standard with most fasteners, with stainless steel and zinc also available. No matter what your application or environment, theres a coating thats right for you. Whether its the matchtech painted coating or tripleGuard corrosion protection, marco has your fasteners covered from start to finish.
A trimmable joint and end lap sealing tape for metal roofing and wall jobs. Mastix is a high quality adhesive on a roll...the roll wont telescope from heat before installation, and Mastix really holds hot metals. Its made with a superior adhesive thats non-staining and permanently flexible. Use it to provide an excellent seal around windows, doors, roof vents, stacks, access doors, and other penetration points... wherever you need to seal metal to metal.
M-CLIPS
FLEx-o-vEnT LP2
Flexible Foam Ridge Vent as universal ridge vent Low Profile Vented Closure as ridge vent
x-SEaL
Expandable Foam tape
angLEkUT
rooF booTS
Pipe Flashing
TITEbonD SEaLanT
Durable & flexible
MaSTIx
Butyl tape
rE2
CLoSUrE FoaM
QUIkDrILL
Metal to metal fastener
SILL-rITE
Multi-use sill plate sealer provides a long-lasting seal
WEaThEr-TITE DoorS
Rolled Edge, Reliable Seal (5 models)
For nearly twenty years, Marco Industries has been delivering award-winning products to the metal building industry that offer easy installation, remarkable building ventilation, lower utility costs, extreme durability, and outstanding warranties...products that are economically and ecologically smart. Choose Marco for Everything you need to Make your Structure weather-tite.
RoofBoots represent yet another Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the building industry.
MADE IN USA
Marco Industries Corporate: 9410 E. 54th Street | Tulsa, oK 74145 | 1.800.800.8590 | fax: 1.918.622.4536 041 Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | fax: 1.306.775.0072
Marcos multi-use sill plate sealer provides a long-lasting seal for almost any construction project
Sill-Rite sill plate sealer is made from lightweight polyethylene foam. By filling the gap between the sill plate and the foundation, air infiltration is considerably reduced to provide cost savings for your heating and air conditioning. Worried about sill plate rot? Marcos got you covered. Sill-Rites durable, moisture resistant characteristics help prevent water and insect infiltration. Unroll Sill-Rite flush to the top of the foundation wall and staple to bottom of sill plate or tilt-up-wall section. Fit Sill-Rite over anchor bolts. Position sill plate flush with the foundation and secure with anchors. Its that easy.
Step 1
Unroll flush to top of foundation wall and staple to bottom of the sill plate or tilt-upwall section.
Step 2
Fit Sill-Rite over anchor bolts.
Step 3
Position sill plate flush with the foundation and secure with anchors.
Material thickness
1/4" 1/4"
rib height
1/16" 1/16"
rib spacing
1-1/16" 27/32"
Material Density
22kg/m 3 10% 22kg/m 10%
3
Material color
Beige Beige
Material type
Polyethylene Polyethylene
roll DiaMeter
17" 17"
Pr o D U Ct te Sti N G Density coMpression recoVery coMpression DeFlection tensile strength Water absorption r-ValUe teMperatUre liMit sealant Use Many other uses.
ValUe
2.0 lb/ft 3 avg. >90%, min. 21 psi 55 psi, min. <4% max 3.0 -40 to 160F Cold and hot applied
astM
D1622 D5249 D5249 D1623 D3575 n/a n/a C1330 Type 2, Type C
5-1/2" x 50'
5-1/2" 1/4" 1-1/16"
1/16"
3-1/2" x 50'
3-1/2"
Use as an expansion joint in masonry and concrete construction projects Flexible gasket for building section or panels Sealing cracks and crevices under siding Window and door frame opening sealer Protective wrap for pipes
1/4"
1/16"
27/32"
Sill-Rite represents yet another Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the building industry.
Marco Industries Corporate: 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536
MPC0411
Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
SySteM approaching
MarcoS Weathertite SySteM Will prepare you for any SySteM.
faStenerS
flex-o-vent
anglekut
Custom Beveled Inside/Outside Closure Expandable Foam Tape
x-Seal
lp2
anglekut
Custom Beveled Inside/Outside Closure
roof bootS
Pipe Flashing
MaStix
Butyl Tape
Weathertite Sealant/adheSive
Stays put...during installation and after
re2
W e a t h e r. P r o o f. For twenty years, Marco Industries has been delivering award-winning products to the building industry. Products that offer easy installation, remarkable building ventilation, lower utility costs, extreme durability, and outstanding warranties. Products that are economically and ecologically smart. Products that constitute the basis of the Marco Weather-Tite System. But a system of even the very best products isnt complete or effective without a proven record of getting those products into the hands of customers fast. So the Weather-Tite System includes a commitment by Marco of rapid response to your order. Marco is the only industry leader who promises and consistently delivers customer service at that level. Choose one Marco product, place your order and discover that it truly provides the industry standard in performance and reliability, time after time, through all kinds of weather, and it will be the proof you need to come back for all the other Marco products in the entire Marco Weather-Tite System.
the forecaSt alWa yS lookS good With the Marco Weather-tite SySteM
flex-o-vent cloSure foaM
Flexible Foam Ridge Vent as universal ridge vent Helps prevent rain/snow infiltration which can block ventilation. Extremely durable polyester is flame-, clog-, tear-resistant and economical. Double bead of M63 adhesive makes it easy to install. Its economical and comes with a 40-year limited warranty.
Inside/Outside Closures with adhesive Choose profiles for every application, 5 different foams, and thickness variety. Provides better UV resistance. A full " adhesive bead means non-blowaway installation, even in subfreezing temperatures or wet surfaces.
lp2
Low Profile Vented Closure as ridge vent Made from re-cycled polyester, LP2 is non-woven, nonwicking. Special contours provide custom, low-profile fit for any pitch and most major roof profiles to help keep out dust, moisture, insects, and yet allow ventilation to reduce utility costs.
MaStix
anglekut
Butyl Tape This trimmable, non-staining, and permanently flexible joint and end lap sealing tape is for sealing around windows, doors, roof vents stacks, access doors, and other penetration points. The high-quality adhesive prevents telescoping from heat during installation and keeps the tape in place on hot metal roof and wall panels.
Custom Beveled Inside/Outside Closure Easy-to-order for a precisely matched profile/angle to every hip and valley on metal roof panel. Easy to install for a superior seal, plus it wont bleed, dry out, or dissolve when subjected to weather and UV rays.
roof bootS
Pipe Flashing Choose round base, square base, retro-fit, silicone... and several colors. All Roof Boot sizes (to fit 1/4" to 9" pipe) provide a flexible, durable, secure fit.
x-Seal
Weathertite Sealant/adheSive
Stays put...during installation and after Features low VOC, excellent flexibility, a fast cure... paintable and mold/mildew resistant. And is extremely easy to install.
Non-Warping, Non-Corroding Reroof Retrofit Spacer No more warped wood firring! Eliminate tear-off with the easy-to-install RE2 which wont rot, corrode, or crease metal.
re2
Expandable Foam Tape X-Seal expands from " to 1-1/4", flexes, and compresses to fit any troublesome gap, providing an economical and UV-stable way to keep out bugs and vermin and to maintain a seal in heat or cold. Wont dry out or extrude like caulk or butyl tapes.
faStenerS
Weather-tite doorS
Rolled Edge, Reliable Seal (5 models) Special rolled edge, dual contact weather-strip designed into the frame creates a uniquely strong seal. All models (except the extremely economical aluminum mill frame) come with all steel frame and skin. Several add-on options available.
These products and more represent Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the building industry.
Marco Industries Corporate: 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536
MPC0910
Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072
For any shaped gap in the construction of metal buildings, doors and windows, concrete, wood, and more
Fasteners
FlEX-o-VEnT anglekut
X-SEal
lp2
anglekut
roof boots
Mastix
Weathertite Sealant/adheSive
Clips
Closure Foam
Hips
Doors
Previous to Expansion
Expanded
Physical Characteristics
Description/Base/Color:.............................. Precompressed,.self-expanding.pur-foam.impregnated.with.a.high.quality.modified.acrylic,. . flame.retardant.emulsion...The.base.foam.is.black;.other.colors.available. Density:........................................................ 10.lbs./cu..Ft...150.kg/m3 Flammability:............................................... UL.94.HF1,.Self-Extinguishing,.DIN.4102,.B1.compression.at.50%,.B2.compressed Temperature.Stability.Range:....................... -40F.to.212F Manufacturers.Lab:..................................... (-40C.to.120C) . Weather.Resistancy:..................................... Excellent Compression.Set:........................................ Maximum.2% Tensile.Strength:.......................................... 21.8.psi Thermal.Conductivity:.................................. 12,106.BTU.(hr.).(ft2).(*F/ft)
X-Seal represents yet another Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the building industry.
Marco Industries Corporate: 9410 E. 54th Street | Tulsa, OK 74145 | 1.800.800.8590 | Fax: 1.918.622.4536
MPC0311
Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | Fax: 1.306.775.0072