Professional Documents
Culture Documents
TM
Traditional
9 Anemometer 1 Blades 2 Rotor 10 Rotor 3 Pitch 11 Nacelle 4 Brake 12 High Speed 5 Slow Speed Shaft Shaft 13 Yaw Drive 6 Gear Box 14 Yaw Motor 7 Generator 15 Tower 8 Controller
Turning a wind turbine into a wind generator by eliminating the gear box.
like no other.
Turbine Mounting Options: At 185 lbs (64 kgs) and 6 feet (1.8 m) its versatile like no other.
Flat Roof (Commercial)
QuadPodTM and Ballast Mount
QuadPodTM
Roof Box
Directional Fins
The Directional fins continuously guide the turbine for maximum wind exposure. The system starts turning at 0.5 mph (0.2 m/s), automatically shuts down in high winds (+42 mph [+18.8 m/s]) and is engineered for winds up to 140 mph (62.6 m/s).
building or the other can affect the output. Correction site assessment is important to enhance the performance of your turbine regardless of your product choice. Always seek the highest elevation and lowest obstruction field as possible (33 feet (10.0 m) minimum, the higher the better). You may advise your city, town or neighbors that youre installing a new generation wind turbine, but at 185 lbs (84 kgs), 6 feet (1.8 m), 35 dB, it may be not necessary. Were here to help you. An average annual wind rating of 10 mph (4.5 m/s) is recommended as a good minimum wind speed to keep in mind, off grid locations might consider less. The Honeywell Wind Turbine is designed for all environments from hot to cold
temperatures and from coastal locations to mountaintops. Electrical connection is very similar to a backup generator connected to the building or solar power to the grid. The system is designed to be installed by a licensed electrical contractor. Our Smart Swap warranty program allows contractors to replace components easily. WindTronicsTM has created a range of tools to assist in identifying proper site selection based on wind, rates and rebates. www.windknowledge.com Easy look up of US wind rates, electrical rates, rebates and incentives. www.windestimator.com Global wind statistic, predominant wind direction and wind strength analysis.
Connect to Building/House, Utility or 12/24/48V Batteries Converts your wind like no other.
2009 UNIDO Top Ten New Technologies for Renewable Energy Utilization
Product Certification
The Honeywell Wind Turbine is ETL listed, conforming to UL 1741 and CAN/CSA C22.2 No.107.1.
Addresses:
Size (6 feet - 1.8 m) Weight (185 lbs - 84 kgs) Noise (35 dB) Blades (Shrouded) Vibration (Fixed blades, no gear box)
cutting-edge turbine technology to the individual, enabling each to harness, utilize and manage the energy at their local wind zone. The SmartBoxTM is the control system that consists of a charge controller and a non-grid-tie 1.5 kW inverter. Included within the charge controller is an automatic AC transfer switch that will automatically switch between your AC grid and power generated via the turbine.
offers
True Sine Wave Inverter The Honeywell Wind Turbine is designed Battery Power to be installed where the power is being Management System consumed and can produce 1500 kWh/yr Wind Direction & plus or minus depending on location and Speed Measurement wind speed. The Blade Tip Power SystemTM Control System is a class in itself. The Honeywell Wind Turbine is the technology of choice for cities and towns.
Relevant Applications
Application Residential Commercial Condo Real Estate Light Industrial Agricultural - Wind Farms - ER 12/24/48 DC Charging Remote - Developing Markets Wireless Tower Hospitality Hospital Education Each System Includes: Wind Turbine WT6500 Junction Box SmartBoxTM Controller Anemometer Inverter Capability: Connection To: Batteries / Box: (not included) 1500 W Sub-Panel 24 VDC Anemometer 1000 W Battery System 12 VDC/250 W 24 VDC/500 W 48 VDC/1000 W Available Mounting Options Flat Roof - adjustable 6' QuadPodTM (ballast base avail) Pitched Roof - adjustable 6' QuadPodTM (ballast base avail) Pole Mount (coupler avail) Product Offering Non Grid Tie Wind Turbine WT6500 DC Charge Controller Wind Turbine WT6500 DC Charger Controller Grid Tie Inverter/Controller Anemometer 3.0 kW (up-to-3 turbines) Grid 48 VDC Direct DC Grid Tie
Description
Part Number Wind Turbine SmartBoxTM 1.5 kW Inverter/Controller Non Grid Tie 110V SmartBox
TM
Product Dimensions
GTIN/ UPC Unit WT-6500 SB6500-110NGT SB6500-220NGT OB-GTFX3048 OB6500-120GT MQP6500 MQP6500-B WPDL6500 824309200035 824309100014 824309200028 824309200066 185 lbs 62 lbs 62 lbs 56 lbs 7 lbs 160 lbs 90 lbs 0.5 lbs Weight Shipping 374 lbs 80 lbs 80 lbs 67 lbs 9 lbs 170 lbs 110 lbs 1 lb Dimensions (H x W x L) Unit 72 x 24 x 72" 14 x 25 x 25" 14 x 25 x 25" 13 x 8.25 x 16.25" 12 X 10 X 6" 72 x 10 x 10" (Adjustable) 44 x 39 x 5.5" 5 X 7 X 2" Shipping 91 x 26 x 84" 19 x 28 x 28" 19 x 28 x 28" 21.75 x 13 x 22" 16 X 14 X 8" 74 x 12 x 12" 46 x 40 x 6" 6 X 8 X 3"
Turbine Package
Dimension: 91 x 26 x 84
Power Curve
2500 2250 2000 2000 1750
Power Output
Rated Power
POWER (W)
Gross weight: 374 lbs Net weight for turbine JBox and deflectors: 240 lbs Shrink wrapped
2,500 Watts at 40 mph Peak Rating (steady state wind) 2752 kWh/yr in Class 4 Winds (Steady State)
WindTronicsTM 380 W. Western Suite 301 Muskegon, MI 49440 toll free 877.946.3898 local fax 231.332.1200 231.726.5029
m/s 0 mph 0
2.3 5
4.7 10
7.0 15
9.3 20
11.7 25
14.0 30
16.3 35
18.7 40
21.0 45
WIND SPEED
The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representation or warranties with respect to this product. WIND-11-2010 November 2010 Printed in Canada 2010 WindTronicsTM Inc.
www.windtronics.com
info@windtronics.com