Professional Documents
Culture Documents
Technical Description
Issue Date 06 2011-03-30
Copyright Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
Website: Email:
Issue 06 (2011-03-30)
Product Version
The following table lists the product version related to this document. Product Name DBS3900 GSM (hereinafter referred to as DBS3900) Product Version V100R012
Intended Audience
This document is intended for: l l l Network planners Field engineers System engineers
Organization
1 Changes in the DBS3900 GSM Technical Description This section describes the changes in the DBS3900 GSM Technical Description. 2 DBS3900 Product Family This chapter describes the functional modules and auxiliary equipment in the DBS3900 product family. 3 Logical Structure of the DBS3900 This describes the internal logical units of the BBU and RRU.
Issue 06 (2011-03-30) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. iii
4 Software Structure of the BTS The BTS software consists of the platform software, signaling protocol software, OM software, and data center. The latter three are application software, and the platform software provides support for the application software. 5 DBS3900 Monitoring Schemes The monitoring system of the DBS3900 monitors the power supply, fans, and environment. 6 Clock Synchronization Modes of the DBS3900 The DBS3900 supports four types of reference clocks: IP clock, line clock, free-run clock, and external clock. 7 Surge Protection Specifications of Ports on the DBS3900 This describes the surge protection specifications of the external ports on the BBU3900 and RRU. 8 CPRI Cable Connections of the RRUs The RRUs support star, chain, and ring topologies. 9 RRU3004 Configuration RRU3004 is a double-transceiver remote radio unit and supports two carriers. Different configurations must be chosen in different topologies. 10 RRU3008 Configuration RRU3008 is a multi-carrier remote radio unit and supports eight carriers. Different configurations must be chosen in different topologies. 11 Typical Scenarios of the DBS3900 (with the DC RRU) This describes the typical installation scenarios of the DBS3900 configured with the BBU3900 and DC RRU. 12 Typical Scenarios of the DBS3900 (with the AC RRU) This describes the typical scenarios of the DBS3900 configured with the BBU3900 and AC RRU.
Conventions
Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. Indicates a hazard with a medium or low level of risk, which if not avoided, could result in minor or moderate injury.
iv
Issue 06 (2011-03-30)
Symbol
Description Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Indicates a tip that may help you solve a problem or save time. Provides additional information to emphasize or supplement important points of the main text.
General Conventions The general conventions that may be found in this document are defined as follows. Convention Times New Roman Boldface Italic Courier New Description Normal paragraphs are in Times New Roman. Names of files, directories, folders, and users are in boldface. For example, log in as user root. Book titles are in italics. Examples of information displayed on the screen are in Courier New.
Command Conventions The command conventions that may be found in this document are defined as follows. Convention Boldface Italic [] { x | y | ... } [ x | y | ... ] { x | y | ... }* Description The keywords of a command line are in boldface. Command arguments are in italics. Items (keywords or arguments) in brackets [ ] are optional. Optional items are grouped in braces and separated by vertical bars. One item is selected. Optional items are grouped in brackets and separated by vertical bars. One item is selected or no item is selected. Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected. Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected.
[ x | y | ... ]*
Issue 06 (2011-03-30)
GUI Conventions The GUI conventions that may be found in this document are defined as follows. Convention Boldface > Description Buttons, menus, parameters, tabs, window, and dialog titles are in boldface. For example, click OK. Multi-level menus are in boldface and separated by the ">" signs. For example, choose File > Create > Folder.
Keyboard Operations The keyboard operations that may be found in this document are defined as follows. Format Key Key 1+Key 2 Key 1, Key 2 Description Press the key. For example, press Enter and press Tab. Press the keys concurrently. For example, pressing Ctrl+Alt +A means the three keys should be pressed concurrently. Press the keys in turn. For example, pressing Alt, A means the two keys should be pressed in turn.
Mouse Operations The mouse operations that may be found in this document are defined as follows. Action Click Double-click Drag Description Select and release the primary mouse button without moving the pointer. Press the primary mouse button twice continuously and quickly without moving the pointer. Press and hold the primary mouse button and move the pointer to a certain position.
vi
Issue 06 (2011-03-30)
Contents
Contents
About This Document...................................................................................................................iii 1 Changes in the DBS3900 GSM Technical Description.......................................................1-1 2 DBS3900 Product Family..........................................................................................................2-1 3 Logical Structure of the DBS3900............................................................................................3-1
3.1 Logical Structure of the BBU..........................................................................................................................3-2 3.2 Logical Structure of the RRU..........................................................................................................................3-3
4 Software Structure of the BTS.................................................................................................4-1 5 DBS3900 Monitoring Schemes................................................................................................5-1 6 Clock Synchronization Modes of the DBS3900...................................................................6-1 7 Surge Protection Specifications of Ports on the DBS3900..................................................7-1 8 CPRI Cable Connections of the RRUs...................................................................................8-1 9 RRU3004 Configuration............................................................................................................9-1 10 RRU3008 Configuration........................................................................................................10-1 11 Typical Scenarios of the DBS3900 (with the DC RRU)..................................................11-1
11.1 BBU3900 Outdoors and RRU3004 Outdoors.............................................................................................11-2 11.1.1 Scenario 1: -48 V DC Power Input....................................................................................................11-2 11.1.2 Scenario 2: 220 V AC Power Input....................................................................................................11-3 11.2 BBU3900 Indoors and RRU3004 Indoors..................................................................................................11-8 11.2.1 Scenario 1: -48 V DC Power Input....................................................................................................11-9 11.2.2 Scenario 2: 220 V AC Power Input..................................................................................................11-13 11.3 BBU3900 Indoors and RRU3004 Outdoors..............................................................................................11-19 11.3.1 Scenario 1: -48 V DC Power Input..................................................................................................11-19 11.3.2 Scenario 2: 220 V AC Power Input..................................................................................................11-20 11.4 BBU3900 Outdoors and RRU3008 Outdoors...........................................................................................11-21 11.4.1 Scenario 1: -48 V DC Power Input..................................................................................................11-21 11.4.2 Scenario 2: 220 V AC Power Input..................................................................................................11-23 11.5 BBU3900 Indoors and RRU3008 Indoors................................................................................................11-28 11.5.1 Scenario 1: -48 V DC Power Input..................................................................................................11-29 11.5.2 Scenario 2: 220 V AC Power Input..................................................................................................11-29 Issue 06 (2011-03-30) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. vii
Contents
11.6 BBU3900 Indoors and RRU3008 Outdoors..............................................................................................11-30 11.6.1 Scenario 1: -48 V DC Power Input..................................................................................................11-31 11.6.2 Scenario 2: 220 V AC Power Input..................................................................................................11-31
viii
Issue 06 (2011-03-30)
Figures
Figures
Figure 2-1 DBS3900 product family....................................................................................................................2-1 Figure 3-1 Logical structure of the BBU3900......................................................................................................3-2 Figure 3-2 Logical structure of the RRU3004......................................................................................................3-4 Figure 3-3 Logical structure of the RRU3008......................................................................................................3-4 Figure 4-1 Software structure of the BTS............................................................................................................4-1 Figure 5-1 Monitoring ports on the BBU.............................................................................................................5-1 Figure 5-2 Components of the DBS3900 monitoring system..............................................................................5-2 Figure 8-1 Typical topologies of the RRUs......................................................................................................... 8-1 Figure 9-1 RF111_1A.......................................................................................................................................... 9-2 Figure 9-2 RF211_1A.......................................................................................................................................... 9-3 Figure 9-3 RF212_1A.......................................................................................................................................... 9-4 Figure 9-4 RF222_1A.......................................................................................................................................... 9-4 Figure 9-5 RF112_2B...........................................................................................................................................9-5 Figure 10-1 RF111_1A......................................................................................................................................10-3 Figure 10-2 RF112_2B.......................................................................................................................................10-4 Figure 10-3 RF211_1A......................................................................................................................................10-4 Figure 10-4 RF212_1A......................................................................................................................................10-5 Figure 10-5 RF222_1A......................................................................................................................................10-6 Figure 11-1 Installation scenario of BBU+RRU+TMC.....................................................................................11-2 Figure 11-2 Installation scenario of OMB+BBU+DCDU03B+RRU................................................................11-3 Figure 11-3 Installation scenario 1 of BBU+RRU+APM30+BBC....................................................................11-4 Figure 11-4 Installation scenario 2 of BBU+RRU+APM30+BBC....................................................................11-6 Figure 11-5 Installation scenario of BBU+RRU+APM30.................................................................................11-7 Figure 11-6 Installation scenario of OMB+BBU+4815+RRU..........................................................................11-8 Figure 11-7 Indoor centralized installation scenarios of the BBU and RRUs (S2)............................................11-9 Figure 11-8 Indoor centralized installation scenarios of the BBU and RRUs (S4)..........................................11-10 Figure 11-9 Indoor separate installation scenarios of the BBU and RRUs (S2+S2).......................................11-11 Figure 11-10 Indoor separate installation scenarios of the BBU and RRUs (S4+S4).....................................11-12 Figure 11-11 Indoor centralized installation scenarios of the BBU and RRUs (S2)........................................11-14 Figure 11-12 Indoor centralized installation scenarios of the BBU and RRUs (S4)........................................11-15 Figure 11-13 Indoor separate installation scenarios of the BBU and RRUs (S2+S2).....................................11-16 Figure 11-14 Indoor separate installation scenarios of the BBU and RRUs (S4+S2).....................................11-18 Figure 11-15 Installation scenario of BBU+RRU+DCDU-03B......................................................................11-20 Issue 06 (2011-03-30) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. ix
Figures
DBS3900 GSM Technical Description Figure 11-16 Installation scenario of BBU+RRU+PS4890+DCDU-03B........................................................11-20 Figure 11-17 Installation scenario of BBU+RRU+TMC.................................................................................11-21 Figure 11-18 Installation scenario of OMB+BBU+DCDU03B+RRU............................................................11-22
Figure 11-19 Installation scenario 1 of BBU+RRU+APM30+BBC................................................................11-24 Figure 11-20 Installation scenario 2 of BBU+RRU+APM30+BBC................................................................11-25 Figure 11-21 Installation scenario of BBU+RRU+APM30.............................................................................11-27 Figure 11-22 Installation scenario of OMB+BBU+4815+RRU......................................................................11-28 Figure 11-23 Indoor centralized installation scenario of the BBU and RRU...................................................11-29 Figure 11-24 Indoor centralized installation scenario of the BBU and RRU...................................................11-30 Figure 11-25 Installation scenario of BBU+RRU+DCDU-03B......................................................................11-31 Figure 11-26 Installation scenario of BBU+RRU+PS4890+DCDU-03B........................................................11-32 Figure 12-1 Installation scenario of the BBU3900 and RRU (1).......................................................................12-2 Figure 12-2 Installation scenario of the BBU3900 and RRU (2).......................................................................12-3 Figure 12-3 Installation scenario of the BBU3900 and RRU (3).......................................................................12-4 Figure 12-4 Installation scenario of the BBU3900 and RRU (1).......................................................................12-5 Figure 12-5 Installation scenario of the BBU3900 and RRU (2).......................................................................12-6 Figure 12-6 Installation scenario of the BBU3900 and RRU (3).......................................................................12-7
Issue 06 (2011-03-30)
Tables
Tables
Table 2-1 Functional modules of the DBS3900...................................................................................................2-2 Table 2-2 Auxiliary equipment of the DBS3900..................................................................................................2-2 Table 5-1 Functions of the monitoring system.....................................................................................................5-2 Table 7-1 Surge protection specifications of the external ports on the BBU3900...............................................7-1 Table 7-2 Surge protection specifications of the external ports on the RRU3004 and RRU3008 V1.................7-2 Table 7-3 Surge protection specifications of the external ports on the RRU3008 V2.........................................7-2 Table 8-1 Three typical topologies.......................................................................................................................8-1 Table 8-2 CPRI port specifications...................................................................................................................... 8-2 Table 9-1 Major ports on RRU3004.....................................................................................................................9-1 Table 9-2 Basic configurations.............................................................................................................................9-2 Table 9-3 Typical configurations......................................................................................................................... 9-5 Table 10-1 Major ports on RRU3008 V1...........................................................................................................10-1 Table 10-2 Ports on RRU3008 V2.....................................................................................................................10-2 Table 10-3 Basic configurations.........................................................................................................................10-2 Table 10-4 Typical configurations.....................................................................................................................10-6
Issue 06 (2011-03-30)
xi
06 (2011-03-30)
This is the fifth commercial release of V100R012. Compared with issue 05 (2011-01-20), this issue includes the following new topic: l l 9 RRU3004 Configuration 10 RRU3008 Configuration
Compared with issue 05 (2011-01-20), this issue does not incorporate any changes. Compared with issue 05 (2011-01-20), this issue does not exclude any topics.
05 (2011-01-20)
This is the fourth commercial release of V100R012. Compared with issue 04 (2010-11-30), this issue includes the following new topic: l 8 CPRI Cable Connections of the RRUs
Compared with issue 04 (2010-11-30), this issue does not incorporate any changes. Compared with issue 04 (2010-11-30), this issue does not exclude any topics.
04 (2010-11-30)
This is the third commercial release of V100R012. Compared with issue 03 (2010-09-27), this issue does not include any new topics. Compared with issue 03 (2010-09-27), this issue incorporates the following change:
Issue 06 (2011-03-30)
1-1
Compared with issue 03 (2010-09-27), this issue does not exclude any topics.
03 (2010-09-27)
This is the second commercial release of V100R012. Compared with issue 02 (2010-05-30), this issue does not include any new topics. Compared with issue 02 (2010-05-30), this issue incorporates the following changes: Topic About This Document 3.2 Logical Structure of the RRU Change Description The version V300R012 is changed to V100R012. Function description of control modules is added.
Compared with issue 02 (2010-05-30), this issue does not exclude any topics.
02 (2010-05-30)
This is the first commercial release of V100R012. Compared with issue 01 (2010-04-10), this issue does not include any new topics. Compared with issue 01 (2010-04-10), this issue does not incorporate any changes. Compared with issue 01 (2010-04-10), this issue does not exclude any topics.
01 (2010-04-10)
This is the draft release of V100R012. Compared with issue 05 (2010-03-15) of the V300R009, this issue does not include any new topics. Compared with issue 05 (2010-03-15) of the V300R009, this issue does not incorporate any changes. Compared with issue 05 (2010-03-15) of the V300R009, this issue does not exclude any topics.
1-2
Issue 06 (2011-03-30)
2
Functional Modules of the DBS3900
This chapter describes the functional modules and auxiliary equipment in the DBS3900 product family.
The functional modules of the DBS3900 are the BBU3900 and the RRU. The RRU is categorized into two types: DC RRU and AC RRU. The DC RRU supports DC power inputs and the AC RRU supports AC power inputs. Both the DC RRU and AC RRU have the RRU3004 and RRU3008 models. Figure 2-1 shows the DBS3900 product family. Figure 2-1 DBS3900 product family
Issue 06 (2011-03-30)
2-1
Table 2-1 describes the functions of the functional modules. Table 2-1 Functional modules of the DBS3900 Functional Module BBU3900 Description The BBU3900 is a baseband control unit. It provides ports for connections to the BSC and to the RRU, performs centralized management of the entire DBS3900 in terms of Operation and Maintenance (OM) and signaling processing, and provides the system clock. The RRU3004 is an outdoor remote radio unit. It processes RF and baseband signals. Each RRU module supports two carriers at the maximum. The RRU3008 is an outdoor remote radio unit. It processes RF and baseband signals. Each RRU module supports more than two carriers.
RRU3004 RRU3008
2-2
Issue 06 (2011-03-30)
Description The DCDU-03B is a DC power distribution box. It provides multiple DC power outputs. The PS4890 is an indoor power cabinet. It provides DC power and installation space for customer equipment. When installed with battery groups, the PS4890 can also provide power backup. The EMUA is an environment monitoring device. Its functions are as follows: l Monitoring environment l Monitoring entry into the associated equipment l Monitoring power distribution For detailed functions of the EMUA, see the EMUA User Guide.
EMUA
When the AC RRU is installed outdoors, the AC power surge protection box AC power is required to provide surge protection for the AC RRU. surge protection box OMB The Outdoor Mini Box (OMB) is an outdoor BBU subrack, which provides DC power and installation space for the customer equipment.
Issue 06 (2011-03-30)
2-3
Issue 06 (2011-03-30)
3-1
RRU
l l l
Controls the BTS interface unit to enable the communication between the BBU and the BSC. Controls the high-speed interface unit in the BBU to enable the communication between the BBU and the RRU. Performs the clock-related functions, that is, provides timing signals, manages BTS clocks, and supports external synchronization clock input.
Clock Unit
The clock unit performs the following functions: l l Provides the high-accuracy clock source for the BTS and provides the system clock based on this clock source. Checks the phase-locking status, provides software phase-locking, adjusts DA values, and generates frame numbers.
Monitoring Unit
The monitoring unit collects the information of Boolean alarms and reports the alarm information to the central processing unit.
Issue 06 (2011-03-30)
3-3
PA
Duplexer
LOAD
PA
ADC
LNA
ADC
LNA
RXD_IN RXM_OUT
Figure 3-3 shows the logical structure of the RRU3008. Figure 3-3 Logical structure of the RRU3008
RXM_OUT: RRU RX main output for cascaded RRU RXM_IN: RRU RX diversity input for cascaded RRU modules modules
l l l
Receives downlink data from the upper-level equipment, such as the BBU. Transmits uplink data to the upper-level equipment, such as the BBU. Transfers data between cascaded RRU modules through the CPRI electrical ports.
The downlink TX channels perform the following functions: l l l l Disassembles the packaged signals (timing signals, control signals, and data signals) from the BBU and sends them to associated units. Performs coding, modulation, shaping, and filtering of downlink signals. Performs digital-to-analog (D/A) conversion through the DAC and performs IQ modulation. Up-converts RF signals to the TX band.
The processing unit for baseband performs the following functions: l l receives demodulated and decodes signals. codes, modulates, shapes, and filters downlink signals.
The control module performs the following functions: l l l l Initializes and loads the RRU. Collects alarm information and reports the board status. Receives configuration commands from the BBU and performs configuration management of other modules. Operates and maintains the RRU.
PA
The PA performs the following functions: l l Combines or divides the signals of the two carriers. Amplifies the low-power RF signals sent from the signal processing unit.
Dual Duplexer
The dual duplexer performs the following functions:
Issue 06 (2011-03-30) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 3-5
l l
Multiplexes RX signals and TX signals so that they can share an antenna channel. Filters the RX signals and TX signals.
LNA
The LNA amplifies the signals received from the antennas.
RX
The RX down-converts the LAN signals into IF signals. After the RX amplifies the IF signals, it sends the signals to the ADC.
3-6
Issue 06 (2011-03-30)
4
Signaling protocol software
The BTS software consists of the platform software, signaling protocol software, OM software, and data center. The latter three are application software, and the platform software provides support for the application software. Figure 4-1 shows the software structure of the BTS. Figure 4-1 Software structure of the BTS
OM software
Data center
Platform software
Platform Software
The platform software provides support for the signaling protocol software, OM software, and data center. The functions of the platform software are as follows: l l l l l l
Issue 06 (2011-03-30)
Timing management Task management Memory management Module management Managing the loading and running of the application software Providing the message forwarding mechanism between modules
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 4-1
OM Software
The OM software works together with the maintenance terminals such as the LMT to maintain the BTS. The functions of the OM software are as follows: l l l l l l l l l l Equipment management Data configuration Performance management Commissioning management Alarm management Software management Tracing management Security management Backup management Log management
Data Center
The data center stores the configuration data of all the modules.
4-2
Issue 06 (2011-03-30)
5
Monitoring Ports on the BBU
The monitoring system of the DBS3900 monitors the power supply, fans, and environment.
Figure 5-1 shows the monitoring ports on the BBU. Figure 5-1 Monitoring ports on the BBU
l l
The BBU can provide a maximum of 2 RS485 buses and 16 Boolean signal inputs. The modules connected to RS485 bus 0 cannot change to be connected to RS485 bus 1, and the other way round.
Issue 06 (2011-03-30)
5-1
Boolean0~15
Door sensor of the DCDU-03 of the APMI of the transmission cabinet transmission cabinet transmission cabinet User interface
5-2
Issue 06 (2011-03-30)
6
IP Clock
The DBS3900 supports four types of reference clocks: IP clock, line clock, free-run clock, and external clock.
The IP clock acts as the clock source of the DBS3900 when the BTS uses the IP over FE transmission mode. The IP clock requires the configuration of the IP clock server in the network. The IP clock server carries the reference clock information in the UDP data packet, and then transmits the clock packets to the BTS. After receiving these clock packets, the BTS uses the clock signals interpreted from the packets.
Line Clock
The BBU3900 directly extracts the clock from the E1/T1 interface. Then, the BBU exports the precise 2 MHz and 8 kHz clocks after frequency dividing, phase locking, and phase adjusting. The 2 MHz and 8 kHz clocks are used for frame synchronization and bit synchronization in the BTS. The line clock consists of the trace BSC clock and trace transmission clock. The BTS extracts the clock signals from the BSC through the E1/T1 interface and uses them as the reference clock source. When the transmission mode of the BTS is upgraded from E1/T1 mode to IP mode, if there is no IP clock, the BTS extracts the clock signals from the transmission network through the E1/T1 interface and use them as the reference clock source.
Free-Run Clock
In the absence of external clocks, the internal free-run clock ensures that the BTS keeps working properly for at least ninety days.
External Clock
If the BBU3900 is configured with the USCU, the USCU can receive the external clock signals for the GTMU. The USCU supports clock signals including the GPS clock signal, RGPS clock signal, and BITS clock signal.
Issue 06 (2011-03-30)
6-1
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 s. l All the discharge current items, unless otherwise specified as maximum discharge current, refer to nominal discharge current.
Table 7-1 lists the surge protection specifications of the external ports on the BBU3900. Table 7-1 Surge protection specifications of the external ports on the BBU3900 Port Power supply port E1 port Surge Protection Mode Differential mode Common mode Differential mode (UELP not configured) Common mode (UELP not configured) Differential mode (UELP configured) Common mode (UELP configured) GPS signal input port Differential mode (GPS surge protector configured) Common mode (GPS surge protector configured) Dry contact alarm port, RS485 port
Issue 06 (2011-03-30)
7-1
Port
Surge Protection Mode Common mode (surge protector not configured) Differential mode (surge protector configured) Common mode (surge protector configured)
Table 7-3 lists the surge protection specifications of the external ports on the RRU3008 V2. Table 7-3 Surge protection specifications of the external ports on the RRU3008 V2 Port -48 V DC power port Surge Protection Mode Differential mode Common mode AC power port Differential mode Surge Current 10 kA 20 kA 40 kA
7-2
Issue 06 (2011-03-30)
Port
Surge Current 40 kA 8 kA 40 kA 3 kA 5 kA 3 kA 5 kA
RF port
Issue 06 (2011-03-30)
7-3
The RRUs support star, chain, and ring topologies. Figure 8-1 shows the typical topologies of the RRUs. Figure 8-1 Typical topologies of the RRUs
Table 8-1 describes three typical topologies. Table 8-1 Three typical topologies Topology Star Advantage l Installation and maintenance are easy. l Transmission reliability is high. When an RRU or optical cable is faulty, only one sector is affected. Disadvantage Compared with other topologies, this topology requires large number of optical cables.
Issue 06 (2011-03-30)
8-1
Disadvantage l The number of cascading levels and cascading distances are restricted. l Faults in an upper-level RRU may affect lower-level RRUs.
Based on the distance between a BBU and an RRU, CPRI networking supports short-distance remote and long-distance remote networking. l l For the short-distance remote networking, the longest distance between an RRU and the BBU on a CPRI chain does not exceed 100 m. For the long-distance remote networking, the longest distance between an RRU and the BBU on a CPRI chain ranges from 100 m to 40,000 m.
Different CPRI optical cables are used in the two types of networking. For details, see chapter CPRI Optical Cable in the BBU3900 Hardware Description. Table 8-2 provides the specifications of CPRI ports on the GTMU and RRU. Table 8-2 CPRI port specifications Boar d or Mod ule GTM U GTM Ub RRU 3004 RRU 3008 Number of CPRI Ports CPRI Data Rate Topology Number of Supporte d TRXs/ Carriers 36 TRXs 36 TRXs Cascadin g Levels Maximu m Distance from the BBU -
6 6
1.25 Gbit/s 1.25 Gbit/s or 2.5 Gbit/ s 1.25 Gbit/s 1.25 Gbit/s
Star, chain, or ring Star, chain, or ring Star, chain, or ring Star, chain, or ring
2 2
2 carriers 6 carriers
6 levels 6 levels
40 km 40 km
8-2
Issue 06 (2011-03-30)
9 RRU3004 Configuration
9
Port
Table 9-1 Major ports on RRU3004 Type Port for transceiving RF signals
RRU3004 Configuration
RRU3004 is a double-transceiver remote radio unit and supports two carriers. Different configurations must be chosen in different topologies.
Description The two ports, each of which is used to transmit and receive RF signals, connect to the antenna system through antenna channel 1 and antenna channel 2 respectively. The port is a westbound optical/ electrical port and it is used to connect to the BBU or an upper-level RRU. The port is an eastbound optical/ electrical port and it is used to connect to a lower-level RRU. The port is used to transmit and receive the diversity signals received through an antenna channel.
CPRI port
TX RX CPRI_W
TX RX CPRI_E
RX_IN/OUT
Basic Configurations
Table 9-2 lists the basic configurations of an RRU3004 serving only one sector. The format of the description of the basic configuration is RF[F][TX][RX]_[C][TYPE]. Where, l l
Issue 06 (2011-03-30)
F indicates the number of antenna channels for an RF module. TX indicates the number of transmit channels for an RF module.
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 9-1
9 RRU3004 Configuration
l l l
RX indicates the number of receive channels for an RF module. C indicates the number of CPRI links connecting RF modules with the GTMU board. TYPE indicates the CPRI network topologies applied to connect RF modules with the BBU. If the value of TYPE is A, the star topology is applied. If the value of TYPE is B, the chain topology is applied.
Table 9-2 Basic configurations Basic Configuration RF111_1A RF211_1A RF212_1A RF222_1A RF112_2B Number of Modules 1 1 1 1 2 Sending Receiving Mode Single feeder [1TX 1RX] Double feeder [1TX 1RX] Double feeder [1TX 2RX] Double feeder [2TX 2RX] Single feeder [1TX 2RX] Hardware Configuration Figure 9-1 Figure 9-2 Figure 9-3 Figure 9-4 Figure 9-5
RF111_1A
An RRU3004 connects to the antenna system through ANT_TX/RXA. Antenna channel 1 transmits and receives signals. The star topology is applied to connect the BBU with the RRU3004. Figure 9-1 RF111_1A
9-2
Issue 06 (2011-03-30)
9 RRU3004 Configuration
RF211_1A
An RRU3004 connects to the antenna system through ANT_TX/RXA and ANT_TX/RXB. Antenna channel 1 transmits signals while antenna channel 2 receives signals. The star topology is applied to connect the BBU with the RRU3004. Figure 9-2 RF211_1A
RF212_1A
An RRU3004 connects to the antenna system through ANT_TX/RXA and ANT_TX/RXB. Antenna channel 1 transmits and receives signals while antenna channel 2 receives signals only. The star topology is applied to connect the BBU with the RRU3004.
Issue 06 (2011-03-30)
9-3
9 RRU3004 Configuration
RF222_1A
An RRU3004 connects to the antenna system through ANT_TX/RXA and ANT_TX/RXB. Both antenna channel 1 and antenna channel 2 transmit and receive signals. The star topology is applied to connect the BBU with the RRU3004. Figure 9-4 RF222_1A
9-4
Issue 06 (2011-03-30)
9 RRU3004 Configuration
RF112_2B
Two RRU3004 connect to the antenna system through ANT_TX/RXA. Antenna channel 1 transmits and receives signals. RX_IN/OUT on the two RRU3004 interconnect to transfer diversity signals. The chain topology is applied to connect the BBU with one RRU3004. Figure 9-5 RF112_2B
Typical Configurations
Table 9-3 describes the typical configurations of RRU3004 in different scenarios. Table 9-3 Typical configurations Scenari o S1 Number of Modules 1 Send Mode Transmit diversity Independent transmit Typical Configuration RF222_1A l RF111_1A l RF212_1A l RF222_1A S2 1 Independent transmit or combination l RF111_1A l RF212_1A l RF222_1A
Issue 06 (2011-03-30) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 9-5
9 RRU3004 Configuration
Scenari o
Number of Modules 2
S3 S4
2 2
9-6
Issue 06 (2011-03-30)
10 RRU3008 Configuration
10
Port
Type Port for transceiving RF signals
RRU3008 Configuration
RRU3008 is a multi-carrier remote radio unit and supports eight carriers. Different configurations must be chosen in different topologies.
Table 10-1 describes major ports on RRU3008 V1. Table 10-1 Major ports on RRU3008 V1 Silkscreen ANT_TX/RXA and ANT_TX/RXB Description The two ports, each of which is used to transmit and receive RF signals, connect to the antenna system through antenna channel 1 and antenna channel 2 respectively. The port is a westbound optical/ electrical port and it is used to connect to the BBU or an upper-level RRU. The port is an eastbound optical/ electrical port and it is used to connect to a lower-level RRU. The port is used to transmit and receive the diversity signals received through an antenna channel.
CPRI port
TX RX CPRI_W
TX RX CPRI_E
RX_IN/OUT
Issue 06 (2011-03-30)
10-1
10 RRU3008 Configuration
Table 10-2 Ports on RRU3008 V2 Type Port for transceiving RF signals Silkscreen ANT_TX/RXA and ANT_TX/RXB Description The two ports, each of which is used to transmit and receive RF signals, connect to the antenna system through antenna channel 1 and antenna channel 2 respectively. The port is used to connect to the BBU or an upper-level RRU. The port is used to connect to a lowerlevel RRU. The port is used to transmit and receive the diversity signals received through an antenna channel.
CPRI port
RX TX CPRI0 TX RX CPRI1
RX_IN/OUT
Basic Configurations
Table 10-3 lists the basic configurations of an RRU3008 serving only one sector. The format of the description of the basic configuration is RF[F][TX][RX]_[C][TYPE]. Where, l l l l l F indicates the number of antenna channels for an RF module. TX indicates the number of transmit channels for an RF module. RX indicates the number of receive channels for an RF module. C indicates the number of CPRI links connecting RF modules with the GTMU board. TYPE indicates the CPRI network topologies applied to connect RF modules with the BBU. If the value of TYPE is A, the star topology is applied. If the value of TYPE is B, the chain topology is applied.
NOTE
The configurations of RRU3008 V1 are the same as those of RRU3008 V2. This section takes the configurations of RRU3008 V2 as examples.
Table 10-3 Basic configurations Basic Configuration RF111_1A RF112_2B RF211_1A Number of Modules 1 2 1 Sending Receiving Mode Single feeder [1TX 1RX] Single feeder [1TX 2RX] Double feeder [1TX 1RX] Hardware Configuration Figure 10-1 Figure 10-2 Figure 10-3
10-2
Issue 06 (2011-03-30)
10 RRU3008 Configuration
Number of Modules 1 1
Sending Receiving Mode Double feeder [1TX 2RX] Double feeder [2TX 2RX]
RF111_1A
An RRU3008 connects to the antenna system through ANT_TX/RXA. Antenna channel 1 transmits and receives signals. The star topology is applied to connect the BBU with the RRU3008. Figure 10-1 RF111_1A
RF112_2B
Two RRU3008 connect to the antenna system through ANT_TX/RXA. Each antenna channel 1 transmits and receives signals. RX_IN/OUT on the two RRU3008 interconnect to transfer diversity signals. The chain topology is applied to connect the BBU with one RRU3008.
Issue 06 (2011-03-30)
10-3
10 RRU3008 Configuration
RF211_1A
An RRU3008 connects to the antenna system through ANT_TX/RXA and ANT_TX/RXB. Antenna channel 1 transmits signals while antenna channel 2 receives signals. The star topology is applied to connect the BBU with the RRU3008. Figure 10-3 RF211_1A
10-4
Issue 06 (2011-03-30)
10 RRU3008 Configuration
RF212_1A
An RRU3008 connects to the antenna system through ANT_TX/RXA and ANT_TX/RXB. Antenna channel 1 transmits and receives signals while antenna channel 2 receives signals only. The star topology is applied to connect the BBU with the RRU3008. Figure 10-4 RF212_1A
RF222_1A
An RRU3008 connects to the antenna system through ANT_TX/RXA and ANT_TX/RXB. Each antenna channel transmits and receives signals. The star topology is applied to connect the BBU with the RRU3008.
Issue 06 (2011-03-30)
10-5
10 RRU3008 Configuration
Typical Configurations
Table 10-4 describes the typical configurations of RRU3008 in different scenarios. Table 10-4 Typical configurations Scenario S3-S8 Number of Modules 1 Send Mode Independent transmit Transmit diversity S8-S12 2 Combined transmit Independent transmit Typical Configuration RF212_1A RF222_1A RF112_2B RF222_1A + RF222_1A
10-6
Issue 06 (2011-03-30)
11
11.1 BBU3900 Outdoors and RRU3004 Outdoors This describes the scenarios that the BBU3900 and RRU3004 of the DBS3900 are installed outdoors. 11.2 BBU3900 Indoors and RRU3004 Indoors This describes the scenarios that the BBU3900 and RRU3004 of the DBS3900 are installed indoors. 11.3 BBU3900 Indoors and RRU3004 Outdoors This describes the scenarios that the BBU3900 and RRU3004 of the DBS3900 are installed indoors and outdoors respectively. 11.4 BBU3900 Outdoors and RRU3008 Outdoors This describes the scenarios that the BBU3900 and RRU3008 of the DBS3900 are installed outdoors. 11.5 BBU3900 Indoors and RRU3008 Indoors This describes the scenarios that the BBU3900 and RRU3008 of the DBS3900 are installed indoors. 11.6 BBU3900 Indoors and RRU3008 Outdoors This describes the scenarios that the BBU3900 and RRU3008 of the DBS3900 are installed indoors and outdoors respectively.
Issue 06 (2011-03-30)
11-1
Heater-1U
In this installation scenario, l l l The TMC can be installed on the floor, pole, or wall. The TMC provides a maximum of 7 U for installation purpose. The BBU can be installed in the TMC, which is equipped with the DCDU-03B to provide power for the BBU and RRU.
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue 06 (2011-03-30)
11-2
l l l l
The DCDU-03A configured in the TMC supplies power to transmission units. The heater in the TMC is optional. The RRU can be installed on a pole or tower. The requirement for the switch quantity and capacity of the external power input system is 1 x 63 A.
In this installation scenario, l l l l l The OMB can be installed on a pole, or wall. The OMB provides 2 U space for the BBU and 1 U space for the DCDU03B. The DCDU03B provides the -48 V DC power for the BBU and RRUs. The RRU can be installed on a pole or tower. The maximum configuration of the RRUs is S4/4/4. The requirement for the switch quantity and capacity of the external power input system is 6 x 20 A + 312 A. The maximum input current is 100 A.
If the required space for transmission units is greater than 4 U, configure a TMC and ensure that the distance between the APM30 and the TMC is not longer than 1 m.
APM30
AC/DC-3U
TM space-4U
Heater-1U
BAT.48V/92Ah
BBC
BAT.48V/92Ah
11-4
Issue 06 (2011-03-30)
In this installation scenario, l l l l l l The BBC is installed on the floor. By default, the APM30 is stacked on the BBC. The heater in the APM30 is optional. The APM30 provides a maximum of 4 U space for transmission units. The BBU can be installed in the APM30, which supplies -48 V DC power to the BBU and RRU. The RRU can be installed on a pole or tower. The heater in the BBC is optional. Without occupying additional internal space, the heater can be placed under the baffle plate at the bottom of each battery layer. The requirements for the switch quantity and capacity of the external power input system are as follows: 110 V AC dual-live-wire: 2 x (32 A to 50 A). The 32 A input is recommended. 220 V AC single-phase: 1 x (32 A to 50 A). The 32 A input is recommended. 220 V AC three-phase: 3 x (20 A to 30 A). The 20 A input is recommended.
Issue 06 (2011-03-30)
11-5
TM space-4U
BAT.48V/92Ah
Heater-1U
In this installation scenario, l l l l l l The APM30 and the BBCs can be installed on the floor. By default, the two BBCs are stacked. The APM30 provides a maximum of 4 U space for transmission units. The BBU can be installed in the APM30, which supplies -48 V DC power to the BBU and RRU. The RRU can be installed on a pole or tower. The heater in the BBC is optional. Without occupying additional internal space, the heater can be placed under the baffle plate at the bottom of each battery layer. The requirements for the switch quantity and capacity of the external power input system are as follows: 110 V AC dual-live-wire: 2 x (32 A to 50 A). The 32 A input is recommended. 220 V AC single-phase: 1 x (32 A to 50 A). The 32 A input is recommended. 220 V AC three-phase: 3 x (20 A to 30 A). The 20 A input is recommended.
11-6 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue 06 (2011-03-30)
RRU
APM30
AC/DC-3U
In this installation scenario, l l l The batteries providing 24 Ah backup power can be placed in the APM30. The batteries support a maximum cell configuration of S4/4/4. The APM30 provides a maximum of 2 U space for transmission units. The BBU can be installed in the APM30, which supplies -48 V DC power to the BBU and RRU.
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 11-7
Issue 06 (2011-03-30)
l l
The RRU can be installed on a pole or tower. The requirements for the switch quantity and capacity of the external power input system are as follows: 110 V AC dual-live-wire: 2 x (32 A to 50 A). The 32 A input is recommended. 220 V AC single-phase: 1 x (32 A to 50 A). The 32 A input is recommended. 220 V AC three-phase: 3 x (20 A to 30 A). The 20 A input is recommended.
In this installation scenario, l l l l l The OMB can be installed on a pole, or wall. The OMB provides 2 U space for the BBU and 1 U space for the 4815 power supply system. The 4815 is an AC/DC conversion unit. It converts the 220 V AC power into the -48 V DC power for the BBU and RRUs. The RRU can be installed on a pole or tower. The maximum configuration of RRUs is S2/2 or O4. The requirement for the switch quantity and capacity of the external power input system is 1 x 10 A (AC).
11.2.1 Scenario 1: -48 V DC Power Input When -48 V DC power and the equipment room are available on site, the BBU and RRU can be installed indoors. 11.2.2 Scenario 2: 220 V AC Power Input When 220 V AC power and the equipment room are available on site, the BBU and RRU can be installed indoors.
Issue 06 (2011-03-30)
11-9
Figure 11-8 Indoor centralized installation scenarios of the BBU and RRUs (S4)
S4
D C D U
B B U
R R U
R R U
-48V INPUT L1
JUMPER L2 L3
ANT
In this installation scenario, l l l l The BBU and DCDU-03B are installed in an RRU rack through the 2 U-high adapting pieces. The RRU rack can be installed on the wall or stand. The requirement for the switch quantity and capacity of the external power input system is 1 x 10 A. The RRUs, BBU, and DCDU-03B are equipotentially connected and then grounded through one PGND cable.
11-10
Issue 06 (2011-03-30)
Figure 11-9 Indoor separate installation scenarios of the BBU and RRUs (S2+S2)
S2+S2
D C D U
B B U
R R U
-48V INPUT L1
JUMPER L2
ANT
L2 R R U
JUMPER
ANT
Issue 06 (2011-03-30)
11-11
Figure 11-10 Indoor separate installation scenarios of the BBU and RRUs (S4+S4)
S4+S4
D C D U
B B U
R R U
R R U
-48V INPUT L1
JUMPER
L2
L3
ANT
L2 R R U R R U
JUMPER
L3
ANT
In this installation scenario, l l l l The BBU and DCDU-03B are installed in an RRU rack through the 2 U-high adapting pieces. The RRU rack can be installed on the wall or stand. In S2+S2 configuration, the requirement for the switch quantity and capacity of the external power input system is 1 x 10 A. In S4+S4 configuration, the requirement is 1 x 20 A. Two cascaded RRUs are equipotentially connected and then grounded through one PGND cable.
11-12
Issue 06 (2011-03-30)
Issue 06 (2011-03-30)
11-13
Figure 11-11 Indoor centralized installation scenarios of the BBU and RRUs (S2)
S2
4 8 1 5
B B U
R R U
AC INPUT L1
ANT
11-14
Issue 06 (2011-03-30)
Figure 11-12 Indoor centralized installation scenarios of the BBU and RRUs (S4)
S4
4 8 1 5
B B U
R R U
R R U
AC INPUT L1
JUMPER
-48V OUTPUT
L2
ANT
In this installation scenario, l l l l l l The 4815 is an AC/DC conversion unit. It converts the 220 V AC power into the -48 V DC power for the BBU and RRUs. The BBU and 4815 are installed in an RRU rack using two transfer pieces whose heights are 2 U. The RRU rack can be installed on the wall or stand. The requirement for the switch quantity and capacity of the external power input system is 1 x 5A (AC). The RRUs, BBU, and 4815 are equipotentially connected and then grounded through one PGND cable. When the 4815 is installed in the same rack as the BBU, the 4815 reports dry contact alarms to the BBU.
Issue 06 (2011-03-30)
11-15
Figure 11-13 Indoor separate installation scenarios of the BBU and RRUs (S2+S2)
S2+S2
4 8 1 5
B B U
R R U
AC INPUT L1
ANT
4 8 1 5
R R U
AC INPUT L1 L2
JUMPER
ANT
11-16
Issue 06 (2011-03-30)
Issue 06 (2011-03-30)
11-17
Figure 11-14 Indoor separate installation scenarios of the BBU and RRUs (S4+S2)
S4+S2
4 8 1 5
B B U
R R U
R R U
AC INPUT L1
JUMPER
-48V OUTPUT
L2
L3
ANT
4 8 1 5
R R U
AC INPUT L1 L2
JUMPER
ANT
11-18
Issue 06 (2011-03-30)
In this installation scenario, l l l l l l l The 4815 is an AC/DC conversion unit. It converts the 220 V AC power into the -48 V DC power for the BBU and RRUs. The BBU and 4815 are installed in an RRU rack using two transfer pieces whose heights are 2 U. The RRU rack can be installed on the wall or stand. The requirement for the switch quantity and capacity of the external power input system is 2 x 5A. The RRU and 4815 are equipotentially connected and then grounded through one PGND cable. When the 4815 is installed in the same rack as the BBU, the 4815 reports dry contact alarms to the BBU. When the 4815 is installed in the same rack as the RRU, the RRU does not support detection and monitoring functions. Therefore, monitoring is not performed in this scenario.
Issue 06 (2011-03-30)
11-19
In this installation scenario, l l l The BBU and DCDU-03B are installed in an indoor 19-inch rack. The RRU can be installed outdoors on a pole. The requirement for the switch quantity and capacity of the external power input system is 1 x (63 A to 100 A). The 63 A input is recommended.
11-20
Issue 06 (2011-03-30)
In this installation scenario, l l l The BBU and DCDU-03B are installed in an indoor PS4890. The RRU can be installed outdoors on a pole. The requirements for the switch quantity and capacity of the external power input system are as follows: 110 V AC dual-live-wire: 2 x (32 A to 50 A). The 32 A input is recommended. 220 V AC single-phase: 1 x (32 A to 50 A). The 32 A input is recommended. 220 V AC three-phase: 3 x (20 A to 30 A). The 20 A input is recommended.
Heater-1U
Issue 06 (2011-03-30)
11-21
In this installation scenario, l l l l l l l The TMC can be installed on the floor, pole, or wall. The TMC provides a maximum of 7 U for installation purpose. The BBU can be installed in the TMC, which is equipped with the DCDU-03B to provide power for the BBU and RRU. The DCDU-03A configured in the TMC supplies power to transmission units. The heater in the TMC is optional. The RRU can be installed on a pole or tower. The requirement for the switch quantity and capacity of the external power input system is 1 x 63 A.
In this installation scenario, l l l l l The OMB can be installed on a pole, or wall. The OMB provides 2 U space for the BBU and 1 U space for the DCDU03B. The DCDU03B provides the -48 V DC power for the BBU and RRUs. The RRU can be installed on a pole or tower. The maximum configuration of the RRUs is S4/4/4. The requirement for the switch quantity and capacity of the external power input system is 6 x 20 A + 312 A. The maximum input current is 100 A.
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue 06 (2011-03-30)
11-22
If the required space for transmission units is greater than 4 U, configure a TMC and ensure that the distance between the APM30 and the TMC is not longer than 1 m.
Issue 06 (2011-03-30)
11-23
APM30
AC/DC-3U
TM space-4U
Heater-1U
BAT.48V/92Ah
BBC
BAT.48V/92Ah
The BBC is installed on the floor. By default, the APM30 is stacked on the BBC. The heater in the APM30 is optional. The APM30 provides a maximum of 4 U space for transmission units. The BBU can be installed in the APM30, which supplies -48 V DC power to the BBU and RRU. The RRU can be installed on a pole or tower.
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue 06 (2011-03-30)
l l
The heater in the BBC is optional. Without occupying additional internal space, the heater can be placed under the baffle plate at the bottom of each battery layer. The requirements for the switch quantity and capacity of the external power input system are as follows: 110 V AC dual-live-wire: 2 x (32 A to 50 A). The 32 A input is recommended. 220 V AC single-phase: 1 x (32 A to 50 A). The 32 A input is recommended. 220 V AC three-phase: 3 x (20 A to 30 A). The 20 A input is recommended.
TM space-4U
BAT.48V/92Ah
Heater-1U
l l l l l l
The APM30 and the BBCs can be installed on the floor. By default, the two BBCs are stacked. The APM30 provides a maximum of 4 U space for transmission units. The BBU can be installed in the APM30, which supplies -48 V DC power to the BBU and RRU. The RRU can be installed on a pole or tower. The heater in the BBC is optional. Without occupying additional internal space, the heater can be placed under the baffle plate at the bottom of each battery layer. The requirements for the switch quantity and capacity of the external power input system are as follows: 110 V AC dual-live-wire: 2 x (32 A to 50 A). The 32 A input is recommended. 220 V AC single-phase: 1 x (32 A to 50 A). The 32 A input is recommended. 220 V AC three-phase: 3 x (20 A to 30 A). The 20 A input is recommended.
11-26
Issue 06 (2011-03-30)
RRU
APM30
AC/DC-3U
In this installation scenario, l l l l l The batteries providing 24 Ah backup power can be placed in the APM30. The batteries support a maximum cell configuration of S4/4/4. The APM30 provides a maximum of 2 U space for transmission units. The BBU can be installed in the APM30, which supplies -48 V DC power to the BBU and RRU. The RRU can be installed on a pole or tower. The requirements for the switch quantity and capacity of the external power input system are as follows: 110 V AC dual-live-wire: 2 x (32 A to 50 A). The 32 A input is recommended. 220 V AC single-phase: 1 x (32 A to 50 A). The 32 A input is recommended. 220 V AC three-phase: 3 x (20 A to 30 A). The 20 A input is recommended.
Issue 06 (2011-03-30) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 11-27
In this installation scenario, l l l l l The OMB can be installed on a pole, or wall. The OMB provides 2 U space for the BBU and 1 U space for the 4815 power supply system. The 4815 is an AC/DC conversion unit. It converts the 220 V AC power into the -48 V DC power for the BBU and RRUs. The RRU can be installed on a pole or tower. The maximum configuration of RRUs is S2/2 or O4. The requirement for the switch quantity and capacity of the external power input system is 1 x 10 A (AC).
S1~S8
B B U
R R U
JUMPER
ANT
In this installation scenario, l l l The BBU is installed in an RRU rack using a transfer piece whose height is 2 u. The RRU rack can be installed on the wall or stand. The RRU can be installed on the wall or stand. For the BBU, the requirement for the switch quantity and capacity of the external power input system is 1 x (5 A to 10 A). For the RRU, the requirement is 1 x (10 A to 20 A).
Issue 06 (2011-03-30)
11-29
Figure 11-24 Indoor centralized installation scenario of the BBU and RRU
S1~S8
4 8 1 5
B B U
R R U
AC INPUT L1
ANT
In this installation scenario, l l l l The 4815 is an AC/DC conversion unit. It converts the 220 V AC power into the -48 V DC power for the BBU and RRUs. The BBU and 4815 are installed in an RRU rack using two transfer pieces whose heights are 2 U. The RRU rack can be installed on the wall or stand. The RRU can be installed on the wall or stand. The requirement for the switch quantity and capacity of the external power input system is 1 x 10 A (AC).
11-30
Issue 06 (2011-03-30)
In this installation scenario, l l l The BBU and DCDU-03B are installed in an indoor 19-inch rack. The RRU can be installed outdoors on a pole. The requirement for the switch quantity and capacity of the external power input system is 1 x (63 A to 100 A). The 63 A input is recommended.
Issue 06 (2011-03-30)
11-31
In this installation scenario, l l l The BBU and DCDU-03B are installed in an indoor PS4890. The RRU can be installed outdoors on a pole. The requirements for the switch quantity and capacity of the external power input system are as follows: 110 V AC dual-live-wire: 2 x (32 A to 50 A). The 32 A input is recommended. 220 V AC single-phase: 1 x (32 A to 50 A). The 32 A input is recommended. 220 V AC three-phase: 3 x (20 A to 30 A). The 20 A input is recommended.
11-32
Issue 06 (2011-03-30)
12
Issue 06 (2011-03-30)
12-1
19-inch rack
RRU BBU3900-2U
AC DC
(indoor)
In this scenario, l l l l
12-2
The DC power is supplied to the BBU3900 directly by the site. The BBU3900 can be installed in a 19-inch rack or in the spare space of the customer equipment. The RRU is directly supplied with AC power. The RRU can be installed on the wall.
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue 06 (2011-03-30)
19-inch rack
RRU
4815 BBU3900-2U
AC AC
(indoor)
In this scenario, l l l l The 4815 serves as an AC/DC conversion unit. It converts AC power into DC power for the BBU3900. The BBU3900 and 4815 can be installed in the spare space of the customer equipment or in a 19-inch rack. The RRU is directly supplied with AC power. The RRU can be installed on the wall.
If a site does not supply DC power and the BBU3900 has requirements for power backup, the installation scenarios of the BBU3900 and RRU are shown in Figure 12-3.
Issue 06 (2011-03-30)
12-3
RRU
AC AC (indoor)
Battery
In this scenario, l l l l l The PS4890 is used to convert AC power into DC power. It supplies power and provides installation space for the BBU3900. If configured with the 50 Ah batteries, the PS4890 can provide power backup for a minimum of 24 hours for the BBU3900. The BBU3900 is installed in the PS4890. The RRU is directly supplied with AC power. The RRU can be installed on the wall.
19-inch rack
RRU BBU3900-2U
DC
AC
(indoor)
(outdoor)
In this scenario, l l l l The DC power is directly supplied to the BBU3900 by the site. The BBU3900 can be installed in a 19-inch rack or in the spare space of the customer equipment. The RRU is directly supplied with AC power. The RRU can be installed on the pole or wall.
Issue 06 (2011-03-30)
12-5
19-inch rack
4815 BBU3900-2U
RRU
AC
AC
(indoor)
(outdoor)
In this scenario, l l l l The 4815 serves as an AC/DC conversion unit. It converts AC power into DC power for the BBU3900. The BBU3900 and 4815 can be installed in the spare space of the customer equipment or in a 19-inch rack. The RRU is directly supplied with AC power. The RRU can be installed on the pole or wall.
If a site does not supply DC power and the BBU3900 has requirements for power backup, the installation scenarios of the BBU3900 and RRU are shown in Figure 12-6.
12-6
Issue 06 (2011-03-30)
RRU
AC Battery AC
(indoor)
(outdoor)
In this scenario, l l l l l The PS4890 is used to convert AC power into DC power. It supplies power and provides installation space for the BBU3900. If configured with the 50 Ah batteries, the PS4890 can provide power backup for a minimum of 24 hours for the BBU3900. The BBU3900 is installed in the PS4890. The RRU is directly supplied with AC power. The RRU can be installed on the pole or wall.
Issue 06 (2011-03-30)
12-7