Professional Documents
Culture Documents
1
III B.Tech II Semester Supplimentary Examinations, Aug/Sep 2008
HIGH SPEED AERODYNAMICS
(Aeronautical Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆
1. (a) What is the relationship between internal energy and enthalpy? Carbon diox-
ide expands isentropically through a nozzle from a pressure of 3.0 bar to 1.0
bar. If the initial temperature is 463 K, determine
(b) The final temperature,
(c) The enthalpy drop and
(d) The change in the internal energy. [4x4=16]
1+ γ−1 M12
2. (a) Prove the relation M22 = 2
γM12 − γ−1
for a Normal shock and
2
3. (a) Develop the Prandtl relation in supersonic flows for oblique shocks and
(b) Show that the normal shock may be considered as the limiting case for a strong
oblique shock in which the shock angle is 900 and
(c) That the deflection angle of the streamline is zero. [6+6+4]
6. Air at velocity of 210 m/s decelerates through a diffuser to a velocity of 60 m/s The
temperature and pressure at the inlet are 278 K and 80 kPa with the exit pressure
of 90 kPa. Assuming 1-D steady flow, calculate
1 of 2
Code No: RR322105 Set No. 1
7. Making use of the velocity potential equation for compressible isentropic flows, de-
velop
" ∧
2 # ∧ " ∧ 2 # ∧ ∧
∧ ∧
∂ φ ∂ 2φ ∂ φ ∂ 2φ ∂2 φ
a2 − V∞ + ∂x ∂x2
+ a2 − ∂y ∂y 2
−2 V∞ + ∂x ∂∂yφ ∂x∂y
∂ φ
= 0, where
∧
φ is the perturbation potential due to the placing of a thin airfoil in the flow field.
Application of B.C.may be clearly stated. [16]
8. Define critical Mach number and plot lift and drag coefficient v/s Mach number
for a conventional airfoil. Now describe a supercritical airfoil due to Whitcomb
and plot the aerodynamic characteristics for this airfoil section on the same plot.
Illustrate further with Cp plot. [16]
⋆⋆⋆⋆⋆
2 of 2
Code No: RR322105 Set No. 2
III B.Tech II Semester Supplimentary Examinations, Aug/Sep 2008
HIGH SPEED AERODYNAMICS
(Aeronautical Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆
2. (a) Define strong shock and weak shock wave in a compressible flow .
(b) Illustrate with sketches and plots.
(c) Hence develop the famous Prandtl relation for normal shock waves.
(d) Provide detailed comments on this relation. [3+3+7+3]
5. Consider the equation of continuity under isentropic flow conditions and define the
non-dimensional mass
s flow parameter .Obtain the relationship for the same as given
√
2/γ (γ+1)/γ
pγ p
m T0
below Ap0 = R γ−1 p0 2
− pp0 . [16]
1 of 2
Code No: RR322105 Set No. 2
6. A supersonic nozzle expands air from p0 = 25 bar and T0 = 1050 K to an exit
pressure of 4.35 bar; the exit area of the nozzle is 100cm2 .
Determine :
The throat area; pressure and temperature at throat; temperature at exit; exit
velocity and mas flow rate. [16]
⋆⋆⋆⋆⋆
2 of 2
Code No: RR322105 Set No. 3
III B.Tech II Semester Supplimentary Examinations, Aug/Sep 2008
HIGH SPEED AERODYNAMICS
(Aeronautical Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆
1. (a) Define the stagnation state, stagnation pressure, stagnation enthalpy, stagna-
tion temperature and stagnation velocity of sound.
(b) Obtain from the fundamentals the equation of adiabatic steady flow ellipse.
(c) Hence define and obtain various regimes of flow in the compressible fluid dy-
namics. [5+6+5]
1+ γ−1 M12
2. (a) Prove the relation M22 = 2
γM12 − γ−1
for a Normal shock and
2
3. (a) Consider a 2-step compression corner such that the two oblique shocks so
generated intersect. Explain the phenomenon with a detailed sketch and its
description.
(b) Consider the flow over a 220 half-angle wedge. If M1 = 2.5, p1 = 1 atm and
T1 = 300K, calculate the wave angle and p2 , T2 , and M2 . [8+8]
4. Consider a diamond wedge airfoil of half wedge angle of 20 . The airfoil is aligned
at an angle of 80 to the chord line in a free stream Mach number =2.5. Calculate
the lift and wave drag coefficients for the airfoil with C =2m. Make use of shock-
expansion technique. [16]
5. Consider the equation of continuity under isentropic flow conditions and define the
non-dimensional mass flow
s parameter. Obtain the relationship for the same as
(γ+1)/γ
√ q 2/γ
p
m T0
given below Ap0 R
γ
2
= γ−1 p0 − pp0 [16]
6. Air at 403K and 1 atm enters a C-D nozzle at a velocity of 150 m/s and expands
isentropically to an exit pressure of 76kPa. If the inlet area of the nozzle is 5X10−3
m2 , find
1 of 2
Code No: RR322105 Set No. 3
7. Consider a 2-D, irrotational isentropic flow over an arb. Shaped object, given as
below:
h 2 2
1
i
∂φ 2 ∂ 2 φ 1 ∂φ ∂ φ 2 ∂φ
∂φ ∂ 2 φ
1 − a2 ∂x ∂x2
+ 1 − a2 ∂y ∂y 2
− a2 ∂x ∂y ∂x∂y
= 0, where φ = φ(x, y)
∧
.Now φ = V∞ x + φ , introduces perturbation potential. Obtain the perturbation
velocity equation. Present your work. [16]
8. Describe the effect of profile / shape of the object (streamlined or blunt) on the
local flow over it when placed in a fluid stream. Hence consider the corresponding
change in local Mach number over the profile by taking a circular cylinder and an
airfoil. Now present your work through sketches and plots. [16]
⋆⋆⋆⋆⋆
2 of 2
Code No: RR322105 Set No. 4
III B.Tech II Semester Supplimentary Examinations, Aug/Sep 2008
HIGH SPEED AERODYNAMICS
(Aeronautical Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆
1. (a) Define the terms enthalpy, stagnation temperature and stagnation pressure.
Air at a temperature of 293 K and a pressure of 1 atm (101,325 kPa ) flows
isentropically at a velocity of 300 m/s. Assuming air to behave as a perfect
gas of constant specific heats
(b) Calculate the enthalpy, stagnation temperature and stagnation pressure.
(c) Explain the significance of stagnation properties. [4+8+4]
2. The state of a gas (γ = 1.3, R = 0.469 kJ/kg K ) upstream of a normal shock wave
is given by the following data: M∞ =2.6, p∞ = 2 bar, T∞ =285 K.
(a) Calculate the Mach number, pressure, temperature and velocity of the gas
down stream of the shock.
(b) Verify your calculations from the gas tables. [12+4]
3. Show with sketches and plots that a normal shock wave can be transformed in to
an oblique shock wave if a constant tangential velocity component is superimposed
on the velocities pertaining to a normal shock. Make use of a polar diagram in this
respect. [16]
4. Air at M1 = 2.3 and at a pressure of 70 kPa flows along a wall which bends away
at an angle of 120 from the direction of flow. Determine the Mach number and
pressure after the bend. If in another case the flow experiences a compression over
the concave wall which actually bends through the same angle, determine the Mach
number and pressure with the same free stream conditions. Sketch the flow fields
in both the cases. [16]
5. Consider the equation of continuity under isentropic flow conditions and define the
non-dimensional mass flow parameter. Obtain the relationship for the same in
√ q
m T0 R M
terms of Mach number as given below Ap0 γ
= (γ+1)/2(γ−1) . [16]
(1+ γ−1
2
M 2)
6. Air flows isentropically through a nozzle of throat area 6cm2 and exit area 24cm2 .
If p0 = 630kPa and T0 = 2100 C, compute the mass flow, exit pressure and exit
mach number for
1 of 2
Code No: RR322105 Set No. 4
7. Develop the velocitypotential equation
h i 2 2 ∂φ
∂φ 2 ∂ 2 φ ∂2φ
1
1 − a2 ∂x ∂x2
+ 1 − a2 ∂φ
1
∂y
∂ φ
∂y 2
− a22 ∂φ
∂x ∂y ∂x∂y
= 0 , where φ = φ(x,y)
. Specify the application of boundary conditions for a 2-D object. [16]
8. Define the term critical Mach number. Hence present the variation of lift and drag
coefficients over a selected aerodynamic shape with Mach number. Is the critical
Mach number unique in the consideration of such flows? Make use of illustrated
sketches and plots. [16]
⋆⋆⋆⋆⋆
2 of 2