Professional Documents
Culture Documents
Revised 4/12/04
Click on page number or choose graphic menu button >> To Graphic Menu
Base Vanity Desk Wall Wall Wall
34-1/2" 32" 28-1/4" 30-1/2" 28" 24-3/16"
Bore pattern Bore pattern Bore pattern Tall wall cabinet patterns
TANDEMBOX TANDEMBOX
Back to front page
Back to menu To print this page, press ESC and choose print from the file menu.
56.5
19 (3/4")
Center row of
holes req'd. for
TANDEMBOX
775 (30 1/2")
46.5
Standard 24" base cabinet Shallow 12" base cabinet 30-1/2" wall cabinet
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 Base bore pattern for all Blum runners 3/25/03 MLY 02 1:8 BUS0126 1
Back to menu To print this page, press ESC and choose print from the file menu.
System hole locations for hinge mounting plate Press CTRL-L to return to full screen mode.
Front page
- Measured from bottom of cabinet side
Centerline dimension of
cross rails if material
< Reveal dimensions Cross rail positions other than 3/4" is used
Front dimensions
< 10 (3/8")
62.5
718.5
159
159
159
686.5
19 (3/4")
161.5
289.5
775 (30 1/2")
161.5
640
765
(30-1/8")
606.5
606.5
606.5
616
445
326.5
317
283.5
293
78.5
46.5
62.5
102 (4")
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 Base cabinet types 3/25/04 MLY 02 1:8 BUS0126 2
Back to menu To print this page, press ESC and choose print from the file menu.
Reveal dimensions
157
(6-3/16")
285
3 (1/8")
(11-1/4")
775 (30 1/2")
765
(30-1/8") 157
3 (1/8") (6-3/16")
605
(23-13/16") 3 (1/8")
317
285
(12-1/2")
(11-1/4")
102 (4")
Cabinet (A) 1 door (B) 1 drawer, 1 door (C) 3 drawers (D) 4 drawers
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 Base cabinet door & drawer front heights 2/21/03 MLY 01 1:8 BUS0126 3
Back to menu To print this page, press ESC and choose print from the file menu.
System hole location for cabinet profile. Press CTRL-L to return to full screen mode.
Front page
- Measured from bottom of cabinet side.
- To use 330 full extension versions, use next lowest hole
62.5 38 64
38 64
38 64
(6-3/16") (6-3/16") (6-3/16")
64
38 64
Optional galleries (6-3/16")
285
(11-1/4")
64
< 3 (1/8")
C - 430.5
D - 398.5 320M
38 64
157
320M
38 64
(6-3/16")
605
< 3 (1/8")
480
(23-13/16")
< 3 (1/8")
317
64
64
Optional galleries (12-1/2") Optional galleries
285
(11-1/4")
64
64
C, D -110.5
78.5 320M 320M
38 64
38 64
46.5
62.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 METABOX base pattern - all 320M 3/25/04 MLY 02 1:8 BUS0126 4
Back to menu To print this page, press ESC and choose print from the file menu.
System hole location for cabinet profile. Press CTRL-L to return to full screen mode.
Front page
- Measured from bottom of cabinet side.
- To use 330 full extension versions, use next lowest hole
62.5 38 64
38 64
38 64
(6-3/16") (6-3/16") (6-3/16")
64
38 64
(6-3/16")
C - 494.5 285
(11-1/4")
64
320H < 3 (1/8")
D - 398.5 157
102
320M
38 64
(6-3/16")
605
< 3 (1/8")
480
(23-13/16")
< 3 (1/8")
64
64
C, D -174.5 (12-1/2") 285
(11-1/4")
64
64
320H 320H
78.5
102
102
46.5
62.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 METABOX base pattern - 320M & 320H 3/25/04 MLY 02 1:8 BUS0126 5
Back to menu
System hole location for cabinet profile Runner mounting holes
Front page Upper
- Measured from bottom of cabinet side
Lower
Drawer box height Use lower holes on
Box to front dimension < Reveal dimensions bottom drawers only Tilt top drawer slightly to
Front heights install & remove when
using SOLO runners
102
102
102
(4")
(4")
(4")
(6-3/16") (6-3/16") (6-3/16")
B, C, D - 654.5 24 24 24
62.5
558.5
157
526.5
102
(4")
(6-3/16")
D - 494.5 285 24
(11-1/4")
< 3 (1/8")
203
(8")
24 157
102
(4")
C - 366.5 (6-3/16")
D - 334.5 24
< 3 (1/8")
480
203
203
(8")
(8")
C, D - 46.5 78.5
46.5 36 36
62.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 TANDEM / SOLO pattern 3/25/04 MLY 02 1:8 BUS0126 6
Back to menu To print this page, press ESC and choose print from the file menu.
System hole location for cabinet profile
- Measured from bottom of cabinet side Press CTRL-L to return to full screen mode.
Front page - For 430 series use next highest hole
102
102
102
(4")
(4")
(4")
32 (6-3/16") 32 (6-3/16") 32 (6-3/16")
B, C, D - 654.5
< 3 (1/8") < 3 (1/8") < 3 (1/8")
62.5
558.5
157
102
(4")
526.5 (6-3/16")
285 32
D - 494.5
(11-1/4")
203
(8")
< 3 (1/8")
32 157
102
(4")
C - 366.5 (6-3/16")
D - 334.5 32
< 3 (1/8")
480
203
203
(8")
(8")
C, D - 46.5 78.5
46.5 32 32
62.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 STANDARD runners base pattern 3/25/04 MLY 02 1:8 BUS0126 7
Back to menu To print this page, press ESC and choose print from the file menu.
System hole location for cabinet profile
- Measured from bottom of cabinet side Press CTRL-L to return to full screen mode.
Front page
61 32
61 32
61 32
(6-3/16") (6-3/16") (6-3/16")
B, C, D - 654.5
< 3 (1/8") < 3 (1/8") < 3 (1/8")
62.5
558.5
157
526.5 358M
61 32
Optional galleries (6-3/16")
64
D - 494.5 285
(11-1/4")
< 3 (1/8")
61 32 64
358M + Gal. 157
C - 366.5 358M
61 32
(6-3/16")
D - 334.5 605 < 3 (1/8")
480
(23-13/16")
< 3 (1/8")
64
64
Out of (12-1/2") 285
system hole (11-1/4")
73 32 64
73 32 64
see Pg. 9
78.5 358M + Gal. 358M + Gal.
C, D - 58.5 46.5
62.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 TANDEMBOX base pattern 3/25/04 MLY 04 1:8 BUS0126 8
Back to menu Back to base Back to vanity Back to desk
The lower holes on 358M TANDEMBOX runners are
not accessable. Mounting holes must be manually
drilled only for the bottom drawer at 58.5mm. Front page
For accuracy make the drilling template shown.
224 37
39.5
39.5
58.5
19 (3/4")
eq.
102 (4")
eq.
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Julius Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 Template for TANDEMBOX bottom drawers 3/25/03 MLY 00 1:5 BUS0126 9
Back to menu To print this page, press ESC and choose print from the file menu.
224 37 192 37
56.5
19 (3/4")
Center row
of holes
req'd. for
Ø 5 typ. Ø 5 typ.
32 c. to c. typ.
19 (3/4")
102 (4")
46.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 Vanity bore pattern for all Blum runners 3/12/04 MLY 00 1:8 BUS0126 10
Back to menu To print this page, press ESC and choose print from the file menu.
< 10 (3/8")
62.5
654.5
159
159
159
622.5
19 (3/4")
161.5
257.5
711 (28")
701
576
(27-5/8")
161.5
542.5
542.5
542.5
552
381
294.5
285
219.5
229
78.5
46.5
62.5
102 (4")
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 Vanity cabinet types 3/25/04 MLY 01 1:8 BUS0126 11
Back to menu To print this page, press ESC and choose print from the file menu.
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 MLY BUS0126
Back to menu To print this page, press ESC and choose print from the file menu.
62.5 38 64
38 64
38 64
(6-3/16") (6-3/16") (6-3/16")
64
Optional galleries 157
462.5 320M
38 64
253 (6-3/16")
64
(9-15/16")
C - 398.5
< 3 (1/8")
320M
38 64
D - 334.5 541 157
(21-5/16") 320M
38 64
< 3 (1/8") (6-3/16")
416
< 3 (1/8")
64
Optional galleries
Optional gallery
64
64
285 221
C, D -110.5 (11-1/4")
78.5 (8-11/16")
320M 320M
38 64
38 64
62.5
46.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 METABOX vanity pattern - all 320M 4/12/04 MLY 02 1:8 BUS0126 13
Back to menu To print this page, press ESC and choose print from the file menu.
62.5 38 64
38 64
38 64
(6-3/16") (6-3/16") (6-3/16")
38 64
253 (6-3/16")
64
320H (9-15/16")
C - 398.5
< 3 (1/8")
102
D - 334.5 541 157
(21-5/16") 320M
38 64
< 3 (1/8") (6-3/16")
416
< 3 (1/8")
C, D -174.5
64
64
320H 285 320H 221
(11-1/4") (8-11/16")
78.5
102
102
62.5
46.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 METABOX vanity pattern - 320M and H 4/12/04 MLY 02 1:8 BUS0126 14
Back to menu To print this page, press ESC and choose print from the file menu.
Front page
Runner mounting holes
System hole location for cabinet profile.
Upper
- Measured from bottom of cabinet side.
Lower
102
102
102
(4")
(4")
(4")
(6-3/16") (6-3/16") (6-3/16")
B, C, D - 590.5 24 24 24
102
(4")
462.5 (6-3/16")
D - 430.5 253 24
203
(8")
(9-15/16")
< 3 (1/8")
C - 334.5 541 24
157
102
(4")
(21-5/16") (6-3/16")
< 3 (1/8")
416
D - 270.5 24
< 3 (1/8")
203
(8")
285
152
(6")
221
(11-1/4") (8-11/16")
78.5
36 36
62.5
C, D - 46.5 46.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 TANDEM / SOLO vanity pattern 4/12/04 MLY 02 1:8 BUS0126 15
Back to menu To print this page, press ESC and choose print from the file menu.
102
102
102
(4")
(4")
(4")
32 (6-3/16") 32 (6-3/16") 32 (6-3/16")
B, C, D - 590.5
< 3 (1/8") < 3 (1/8") < 3 (1/8")
494.5 62.5
157
102
(4")
462.5 (6-3/16")
253 32
D - 430.5
203
(8")
(9-15/16")
< 3 (1/8")
C - 334.5 541 32
157
102
(4")
(21-5/16") (6-3/16")
< 3 (1/8") 32
416
D - 270.5
< 3 (1/8")
203
(8")
285
152
(6")
221
(11-1/4") (8-11/16")
78.5
32 32
62.5
C, D - 46.5 46.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 Standard runners vanity pattern 4/12/04 MLY 02 1:8 BUS0126 16
Back to menu To print this page, press ESC and choose print from the file menu.
61 32
61 32
61 32
(6-3/16") (6-3/16") (6-3/16")
B, C, D - 622.5
< 3 (1/8") < 3 (1/8") < 3 (1/8")
494.5 62.5
157
64
Optional galleries
462.5 358M
61 32
253 (6-3/16")
D - 430.5
61 32 64
(9-15/16")
< 3 (1/8")
358M + Gal.
C - 334.5 541 157
(21-5/16") 358M
61 32
< 3 (1/8") (6-3/16")
416
D - 270.5
< 3 (1/8")
64
Optional galleries
Out of
system hole Optional gallery
73 32 64
73 32 64
see Pg. 9 285 221
358M + Gal. (11-1/4") 358M + Gal. (8-11/16")
78.5
C, D - 58.5
62.5
46.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 TANDEMBOX vanity pattern 3/25/04 MLY 01 1:8 BUS0126 17
Back to menu To print this page, press ESC and choose print from the file menu.
610 (24")
93 517
224 37
56.5
19 (3/4")
of holes
req'd. for Ø 5 typ.
717 (28 1/4")
TANDEMBOX
32 c. to c. typ.
19 (3/4")
102 (4")
46.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 Desk bore pattern for all Blum runners 3/26/04 MLY 00 1:8 BUS0126 18
Back to menu To print this page, press ESC and choose print from the file menu.
< 10 (3/8")
62.5
718.5
147.5
147.5
686.5
275.5
128
160
615 (24 3/16")
605
480
19 (3/4")
477
(23-13/16")
477
160
317
339.5
339.5
349
349
157
147.5
78.5
46.5
62.5
102 (4")
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 Desk cabinet types 3/25/04 MLY 00 1:8 BUS0126 19
Back to menu To print this page, press ESC and choose print from the file menu.
Reveal dimensions
125 125
(4-15/16") (4-15/16")
3 (1/8") 3 (1/8")
253
(9-15/16")
125
157
(4-15/16")
3 (1/8") 3 (1/8") (6-3/16")
615 (24 3/16")
3 (1/8")
605
(23-13/16")
157
349 349 (6-3/16")
(13-3/4") (13-3/4") 3 (1/8")
157
(6-3/16")
102 (4")
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 Desk cabinet door & drawer front heights 3/25/04 MLY 00 1:8 BUS0126 20
Back to menu To print this page, press ESC and choose print from the file menu.
38 32
38 32
B - 526.5 (4-15/16") (4-15/16")
64 253
320H (9-15/16") < 3 (1/8")
C, D - 430.5 125
157
320N
102
38 32
(4-15/16")
320M
38 64
(6-3/16")
< 3 (1/8") < 3 (1/8")
< 3 (1/8")
96.5 32
96.5 32
D -270.5 157
320M
38 64
(6-3/16")
349 349
B, C -174.5 (13-3/4") (13-3/4")
241
64
D -110.5 320H 320H
157
320M
38 64
(6-3/16")
102
102
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 METABOX desk pattern 3/25/04 MLY 00 1:8 BUS0126 21
Back to menu To print this page, press ESC and choose print from the file menu.
Front page
(3")
(3")
76
76
C, D - 526.5 24 (4-15/16") 24 (4-15/16")
253
203
(8")
(9-15/16") < 3 (1/8") < 3 (1/8")
125
(3")
157
76
24 24 (4-15/16")
102
B, C - 398.5
(4")
(6-3/16")
D - 366.5 24
< 3 (1/8") < 3 (1/8")
< 3 (1/8")
157
102
(4")
(6-3/16")
D -206.5 349 349 24
(13-3/4") (13-3/4")
(10")
(10")
254
254
< 3 (1/8")
157
102
(4")
36 36 36 (6-3/16")
B, C, D -46.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 TANDEM / SOLO desk pattern 3/25/04 MLY 00 1:8 BUS0126 22
Back to menu To print this page, press ESC and choose print from the file menu.
(3")
(3")
76
76
32 (4-15/16") 32 (4-15/16")
C, D - 526.5
253
(9-15/16") < 3 (1/8") < 3 (1/8")
152
(6")
125
(3")
76
32 32 157
102
(4")
B, C - 398.5 (4-15/16")
32 (6-3/16")
D - 366.5
< 3 (1/8") < 3 (1/8")
< 3 (1/8")
157
102
(4")
32 (6-3/16")
D -206.5 349 349
(13-3/4") (13-3/4")
(10")
(10")
254
254
< 3 (1/8")
157
102
(4")
32 32 32 (6-3/16")
B, C, D -46.5
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 Standard runner desk pattern 3/25/04 MLY 00 1:8 BUS0126 23
Back to menu To print this page, press ESC and choose print from the file menu.
46 32
46 32
C, D - 526.5 (4-15/16") (4-15/16")
128 253
(9-15/16") < 3 (1/8") < 3 (1/8")
358M + Gal. 125
61 32
358N 157
46 32
B, C - 398.5 (4-15/16") 358M
61 32
(6-3/16")
D - 366.5
< 3 (1/8") < 3 (1/8")
< 3 (1/8")
32
32
157
358M
61 32
(6-3/16")
96
96
D -206.5 349 349
(13-3/4") (13-3/4")
Out of < 3 (1/8")
73 32 64
73 32 64
system hole
see Pg. 9 358M + Gal. 358M + Gal. 157
358M
32
B, C, D - 58.5 (6-3/16")
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 TANDEMBOX desk pattern 3/25/04 MLY 00 1:8 BUS0126 24
Back to menu To print this page, press ESC and choose print from the file menu.
305 (12")
76 192 37
< 10 (3/8")
62.5
718.5
< 10 (3/8")
686.5
62.5
654.5
622.5 < 10 (3/8")
62.5
558.5
526.5
22 holes
775 (30 1/2")
711 (28")
640
765 701
17 holes
576
(30-1/8") (27-5/8")
605
480
(23-13/16")
62.5
62.5
30-1/2" wall cabinet 28" wall cabinet 24-3/16" wall
cabinet
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 Wall cabinet patterns 3/29/04 MLY 00 1:8 BUS0126 25
Back to menu To print this page, press ESC and choose print from the file menu.
< 10 (3/8")
62.5
462.5
430.5 < 10 (3/8")
62.5
366.5
334.5
519 (20 7/16")
< 10 (3/8")
14 holes
62.5
509 270.5
423 (16 5/8")
384
(20-1/16")
11 holes
238.5
288
(16-1/4") 317
8 holes
192
(12-1/2")
62.5
62.5
20-7/16" wall cabinet 16-5/8" wall cabinet 12-7/8" wall cabinet
®
Subject to technical modifications without notice
Dimension in millimeters, inch equivalents as noted
Blum, Inc Description Date Scale Drawing No. Page No.
Author Index
Stanley, NC 28164
1-800-438-6788 Wall cabinet patterns 3/29/04 MLY 00 1:8 BUS0126 26