Professional Documents
Culture Documents
D.I.Y.
Deck
How to build your own deck
Tools
Tape measure Shovel Rake Spirit level Hammer Nail punch Circular saw or hand saw Srring line
Safety
Safety glasses or goggles should be worn whenever power tools are in use and when chiselling, sanding, scraping or hammering overhead. Wear ear protectors when using noisy power tools as some tools may damage your hearing. You may need permission from your local council, and/or water & power authorities before this work is carried out. They should be contacted before you start. BUNN773 10/08
Getting started
Preparation for building your deck is crucial. Start by determining the dimensions of your deck and note where any features such as stairs, drains and gas pipes are you will need to mark their position before you dig the footings. Now rake the ground clear and undertake any weed control. Its essential to undertake land preparation by laying some Agi Pipe or other drainage to avoid any water loitering underneath. Select your timber based entirely on the nish you want and your budget.
Fitting bearers
Measure the decking, joist and bearer thickness. Against the house wall measure this thickness down from the intended oor height of the deck. Fasten a 140 x 45mm piece of timber against the wall using dyna bolts for masonry walls and coach screws for timber walls use a bolt or screw every 450mm along the bearer. When attaching to a timber wall, screw into the internal structural timbers when possible. Fix the remaining bearers to the posts using either a housing joint or framing anchors.
For further expert advice consult the qualied Team Members at your local Bunnings Warehouse.