Professional Documents
Culture Documents
SC
SC M
H LR N AUC
V LR
SM E
SM E
97
Version 1 Revision 0
MSC is a functional entity that performs control and switching to the mobile stations within the area that it serves, and an automatic connecting device for the subscriber traffic between the CDMA network and other public networks or other MSCs. MSC is the kernel of the CDMA cellular mobile communication system, and it is different from a wired switch in that an MSC must consider the allocation of the wireless resources and the mobility of subscribers, and at least it must implement the follows processing activities: BRBRAITT Jabalpur, Issued in March-2007 98
When a non-CDMA subscriber calls a CDMA subscriber, the call will first be routed to an MSC, which will inquires the corresponding HLR and further route the call to the called partys MSC. This kind of MSC is called Gateway MSC (GMSC). It is up to the network operator to select which MSCs as GMSCs.
1.4.2.4 Visitor location register (VLR)
VLR is responsible for the storage and updating of the subscriber data of mobile stations that roamed to the service area of this VLR. The VLR is generally configured together with the MSC. When the mobile station enters a new location area, the MSC will notice the VLR, which will initiate registration processing to the HLR to update the subscriber location information. The VLR also stores necessary information for the establishment of calls in the database for the MSC to search. One VLR can cover one or more MSC areas. Specifically, the following information is included: Service profile information (PROFILE) Mobile (MIN/IMSI) Shared secret data (SSD) identification number/international mobile subscriber identity
Electronic serial number (ESN) Mobile station authentication data (AUTHEN) Mobile station authorization data (AUTHOR) Mobile station temporary local directory number (TLDN) Mobile station location area information (LAI)
1.4.2.5 Home location register (HLR)
The HLR provides subscriber information storage and management functions for the mobile network, including mobile subscriber subscription and cancellation and service authorization and cancellation. At the same time, it helps in the implementation of subscribers call and service operations. A CDMA system can contain one or more HLRs BRBRAITT Jabalpur, Issued in March-2007 99
Version 1 Revision 0 based on the number of subscribers, equipment capacity and network organization mode, with multi-HLR mode realized in the form of virtual HLRs. The subscriber information stored in the HLR includes the following two types of information: 1. Subscription information Some location information that enables the realization of call routing and accounting, such as VLR address, MSC address and local mobile station identity. 2. Subscriber-related information stored in the HLR Mainly including: Service profile information (PROFILE) Mobile (MIN/IMSI) Shared secret data (SSD) identification number/international mobile subscriber identity
Electronic serial number (ESN) Mobile directory number (MDN) IMSI/MIN and MDN are often used as key for access to the mobile subscriber database. The HLR also contains the following mobile subscriber information: Telecom services Data services IN services Short message service data Service restriction (such as roaming restriction) Supplementary service parameters
1.4.2.6 Authentication center (AUC)
Authentication center is a function entity for the management of authentication information related to the mobile station. It implement mobile subscriber authentication, stores the mobile subscriber authentication parameters, and is able to generate and transmit the corresponding authentication parameters based on the request from MSC/VLR. The authentication parameters in the AUC can be stored in the encrypted
100
Version 1 Revision 0 form. The authentication center is generally configured together with the HLR. The authentication parameter stored in the AUC include: 1. Authentication key (A_KEY); 2. Share secret data (SSD); 3. Mobile identification number/international mobile subscriber identity (MIN/IMSI); 4. Authentication algorithm (AAV);
5. Accounting (COUNT). 1.4.2.7 Short message center (MC or SC)
As an independent entity in the CDMA cellular mobile communication system, the short message center works in coordination with other entities such as MSC, HLR etc. to implement the reception, storing and transfer of the short messages from CDMA cellular mobile communication system subscribers, and store subscriber-related short message data.
1.4.2.8 Short message entity (SME)
The OMC provides the network operator with network operation and maintenance services, manages the subscriber information and implements network planning, to enhance the overall working efficiency and service quality of the system. Based on the main maintenance functions, there two type of operation and maintenance centers: OMCS and OMC-R. An OMC-S is mainly used for the maintenance work at the mobile switching subsystem (MSS) side; an OMC-R is mainly used for the maintenance work at the base station subsystem (BSS) side. Of course, for an operation and maintenance system, these two parts are not strictly distinguished from each other. In fact, from the approach of the whole system, the entire CDMA mobile communication system (including MSC/VLR, HLR/AUC, SC, BSC, BTS etc.) should be controlled by a highly efficient operation and maintenance system.
101
Version 1 Revision 0
In fact, it is the interface between MSC and BSC. Adopting 2Mb/s PCM digital link, the standard protocols for this interface include IS-634, IOS2.4, IOS4.0 etc. A-interface is mainly used to transmit the following information: 1. BSS management information, 2. Call processing, and 3. Mobility management information.
1.4.3.2 Interface between MSC and VLR (B-interface)
This interface is an internal interface, without standard definition. Its functions are as follows: VLR is the location and management database for subscribers that have roamed into related MSC area. When the MSC needs the subscriber data of the particular subscriber who entered the MSC area, the MSC is to inquire the VLR. In the case of mobile station location updating, the MSC will request theVLR to store the related information. When the user activates the supplementary services or modifies data, the MSC will request the HLR (through VLR) to store the related data. This interface has no standard definition, and generally used as an internal interface.
1.4.3.3 Interface between MSC and HLR (C-interface)
Interface between the MSC and the HLR. The system adopts the IS-41E protocol. This interface is based on 2Mb/s digital interface or 64Kb/s interface, with its interface electrical performance conforming to GF002-9002.1 The General Technical Specifications for Telephone Switching Equipment of the Ministry of Posts and Telecommunications Volume 1 Digital SPC Switching Equipment General Technical Specifications Chapter 7 and GB7611-87 Pulse Coding Modulation Communication System Network Digital Interface Parameters; As for the signaling specifications, for detailed description of MAP, refer to Technical Requirements for 800MHz CDMA Digital Cellular Mobile Communication Network BRBRAITT Jabalpur, Issued in March-2007 102
Version 1 Revision 0 Mobile Application Part (MAP); for detailed description of SCCP, refer to GF010-95 Technical Requirements for National No.7 Signaling Mode Technical Specifications Signaling Connection Control Part (SCCP); for detailed description of MTP, refer to GF001-9001 China Telephone Network No.7 Signaling Mode Technical Specifications. C-interface adopts 24-bit No.7 signaling mode.
1.4.3.4 Interface between VLR and HLR (D-interface)
The system adopts the IS-41E protocol. This interface is based on 2Mb/s digital interface or 64Kb/s interface , with its interface electrical performance conforming to GF002-9002.1 The General Technical Specifications for Telephone Switching Equipment of the Ministry of Posts and Telecommunications Volume 1 Digital SPC Switching Equipment General Technical Specifications Chapter 7 and GB7611-87 Pulse Coding Modulation Communication System Network Digital Interface Parameters; As for the signaling specifications, for detailed description of MAP, refer to Technical Requirements for 800MHz CDMA Digital Cellular Mobile Communication Network Mobile Application Part (MAP); for detailed description of SCCP, refer to GF010-95 Technical Requirements for National No.7 Signaling Mode Technical Specifications Signaling Connection Control Part (SCCP); for detailed description of MTP, refer to GF001-9001 China Telephone Network No.7 Signaling Mode Technical Specifications. D-interface uses 24-bit No.7 signaling mode. This interface is used for switching of subscriber location information, authorization information and service data. The major service function of a mobile station is: it must have the capability of initiating and receiving calls within the service area. In order to support this capability, the HLR has to perform data switching. The VLR notifies the HLR about the subscriber location information, and provides the subscriber roaming number. The HLR sends the subscriber service data required by the VLR. The switching data usually occurs when a subscriber requests for a special service, or when a subscriber or network operator modifies the subscriber data.
1.4.3.5 Interface between MSC and MSC (E-interface)
103
Version 1 Revision 0 The system adopts the IS-41E protocol. This interface is based on 2Mb/s digital interface or 64Kb/s interface, with its interface electrical performance conforming to GF002-9002.1 The General Technical Specifications for Telephone Switching Equipment of the Ministry of Posts and Telecommunications Volume 1 Digital SPC Switching Equipment General Technical Specifications Chapter 7 and GB7611-87 Pulse Coding Modulation Communication System Network Digital Interface Parameters; as for the signaling specifications, for detailed description of MAP, refer to Technical Requirements for 800MHz CDMA Digital Cellular Mobile Communication Network Mobile Application Part (MAP); for detailed description of SCCP, refer to GF010-95 Technical Requirements for National No.7 Signaling Mode Technical Specifications Signaling Connection Control Part (SCCP); for detailed description of MTP, refer to GF001-9001 China Telephone Network No.7 Signaling Mode Technical Specifications.; the ISUP part is still to be defined. E-interface adopts the 24bit No.7 signaling mode. Its functions are as follows: When a mobile station roams from one MSC to another, the MSC will perform handoff in order to keep the subscribers conversation uninterrupted. In this case data switching must be implemented between the MSCs.
1.4.3.6 Interface between MSC and EIR (F-interface)
This interface has no standard definition. Its functions are as follows: When the mobile station is in communication, and the MSC authenticates the mobile station, it has to inquire the EIR, so as to determine whether the mobile station is legal, and thus deciding whether to provide services to this mobile station.
1.4.3.7 Interface between HLR and AUC (H-interface)
Currently an internal interface is used. Its functions are as follows: When the HLR receives an authentication request from an MS, the HLR gets data from the AUC. When the AUC initiates the authentication instruction to the MS, the AUC transfers the authentication information to the subscriber via the HLR.
1.4.3.8 Interface between MC and SME and MC (M-interface)
104
Version 1 Revision 0 Currently the SMPP phase III standard is used. The interfaces function is as follows: When the short message center performs information interaction with the short message entity and another short message center, this protocol must be abided by.
1.4.3.9 Interface between HLR and MC (N-interface)
The interface standard is ANSI-41E. Its function is as follows: When the short message center sends a short message to a subscriber, if the called subscribers address information is not available, it has to inquire the HLR for the subscribers route before it can send the short message to the subscriber.
1.4.3.10 Interface between MC and MSC (Q-interface)
The interface standard is ANSI-41E. Its function is as follows: During the submission and reception of a short message, short message transfer needs to be conducted between the short message center and mobile switching center. At the same time, when the subscribers short message capability changes, the mobile switching center needs to notify the short message center in time.
1.4.3.11 Interface between MSC and OMC
This interface conforms to the network requirements of TMN, and provides standard Q3 interface to the upper-level TMN.
1.4.3.12 Interfaces with PSTN/ISDN (Ai/Di Interfaces)
The CDMA digital cellular mobile network inter-works with PSTN/ISDN through the mobile switching center (MSC) and provides voice, data and certain supplementary services for subscribers. Its interfaces are 2048kb/s-based digital interfaces. TUP and ISUP of the SS7 signaling are adopted with priority as the interface signaling specifications. Where conditions are not available, China No.1 signaling can be used.
1.4.3.13 Interfaces with Other PLMN Networks
The CDMA digital mobile network is normally connected with different types of PLMN networks (such as GSM) through other public networks (such as PSTN and
105
Version 1 Revision 0 ISDN), or directly connected with other types of PLMN networks. The adopted protocol can be TUP or ISUP, or China No.1 signaling.
1.4.3.14 Interfaces with PSPDN
The high-layer interface protocol is the IS-658 protocol, and the bottom layer adopts the X.25 or TCP/IP protocol. This interface is based on 2Mb/s digital interface or 64Kb/s interface , with its interface electrical performance conforming to GF002-9002.1 The General Technical Specifications for Telephone Switching Equipment of the Ministry of Posts and Telecommunications Volume 1 Digital SPC Switching Equipment General Technical Specifications Chapter 7 and GB7611-87 Pulse Coding Modulation Communication System Network Digital Interface Parameters; for the details of signaling specifications, refer to The Technical Requirements for Interface between CDMA Digital Cellular Mobile Communication Network MSC and PSTN network.
Version 1 Revision 0 mobile communication system MSS system links with other entities in the network through the standard MAP signaling. Every independent entity of the CDMA mobile communication system MSS can be connected with devices of other manufacturers as an individual product.
107
Version 1 Revision 0
Version 1 Revision 0
Security protection measures are taken, such as cascade authority control.
management, clock management etc. and is able to provide accurately, reliably, practically and conveniently multiple operation and maintenance facilities, and corresponding functions can be added based on the actual network operation status and the users requirements; 5. The system provide abundant on-line help contents, with multiple help means such as table of contents, index etc.; the universal Windows interface and operation modes tally with the users daily operation habit; 6. The Client/Server architecture facilitates the user to obtain the dynamic information and history information.
109
Version 1 Revision 0
B illin g ce n te r
Q3 X .2 5 /D D N O M C -S T C P /IP
N e tw ork m a n a ge m e n t ce n te r
H L R /A U C
M S C /V L R /S S P
SS7
A Interfa ce
BSS S u b syste m
Fig. 1-6 Network structure CDMA cellular mobile communication system solution
Version 1 Revision 0 In the aspect of WIN, the system supports IS-771 and IS-826 and various related national WIN standard protocols corresponding to these standards; Providing flexible supports to different frequency bands to facilitate the network operators selection; The interface with fixed network is air interface or SS7. 2. Superior Performances The partial separated and modularized system design integrates network entities, such as MSC and VLR, HLR and AUC, and SC and VM respectively; The modularized architecture satisfies flexibly and reliably different requirements for configuration and capacity expansion; BSS adopts internally the packet transmission mode, which enhances the E1 utilization; Supporting various soft and hard handoff modes; Supporting large number of subscribers; Flexible and stable accounting and network management; High security and reliability, and perfect operation and maintenance system; All the service functions required by CDMA 2000 1X can be realized by means of addition of hardware entities and software upgrading of the system. 3. Easy Maintenance Friendly graphic operation and maintenance tools in both Chinese and English; Universal Windows interface and on-line help; Well-equipped system maintenance functions; Multiple communication modes are supported to realize remote/local maintenance, extremely reliably and conveniently. Based on the above analysis, we can come the following conclusion: The early stage investment of this system appears a little bit high, but, in the long run, considering the transition to cellular network and expansion for new services, this scheme undoubtedly the best choice. Therefore, we recommend to use this scheme to build up cellular mobile communication systems.
111
Version 1 Revision 0
Low call loss circuit groups should be provided between TMSC1s. Low call loss circuit groups should be provided between various mobile end offices and TMSCs and between TMSC2s and TMSC1s. The call loss index of low call loss circuit groups should be below 1%, and their traffic is not allowed to overflow to other routes.
1.7.1.2 Setting of high-efficiency direct circuit groups
High-efficiency direct circuit groups should be established as required between any two MSCs with high traffic. The traffic of high-efficiency circuit groups is allowed to overflow to other routes. The specific setting can be carried out according to related specifications about public networks.
112
Version 1 Revision 0
Routes are generally selected according to the principle of high-efficiency direct routes first and then low call loss routes. Calls initiated by fixed subscribers to mobile subscribers are immediately directed to a nearby mobile network, and the mobile network implements the connection; calls initiated by mobile subscriber to fixed subscriber are immediately directed a fixed network, and the fixed network performs the connection. The basic principle of reliability, fastness and ease for billing is essentially adhered to in route selection in China.
1.7.2.2 Mobile subscriber calls fixed subscribers
When a mobile subscriber calls a fixed subscriber, the call is first routed to the GMSC, and the GMSC performs called number analysis. There are two cases of analysis results: 1. The GMSC routes the call directly to the LS of the fixed subscriber, as shown in Fig. 1-7.
Fig. 1-7 Schematic Route Connection for Call from Mobile Subscriber to Local Fixed Subscriber
2. The GMSC directs the call to the trunk office, and PSTN network is used for the connection to the fixed subscriber, as shown in Fig. 1-8.
Fig. 1-8 Schematic Route Connection for Call from Mobile Subscriber to Out-of-town Fixed Subscriber
113
Version 1 Revision 0 When a fixed subscriber calls a mobile subscriber, the call is first directed to the nearby local GMSC, which implements inquiry of the called route information and connects the call to the MSC of the called party, as shown in Fig. 1-9.
Fig. 1-9 Schematic Route Connection for Call from Fixed Subscriber to Mobile Subscriber
When a mobile subscriber calls a mobile subscriber, the initiating MSC analyzes the called number, inquires the called subscribers route information, and implements call connection in the mobile network.
7.5
Numbering plan
MAC
H0H1H2H3
ABCD
In which, CC: country code, 91 for India MAC: mobile access code. H0H1H2H3: HLR identification number, which is assigned by the service provider; BRBRAITT Jabalpur, Issued in March-2007 114
Version 1 Revision 0 ABCD: mobile subscriber number. 2. International Mobile Subscriber Identifier (IMSI) IIMSI is the number that exclusively identifies a mobile subscriber in the CDMA digital mobile network. The structure of IMSI is shown in Fig. 1-11.
In Which, MCC: mobile country code, 404for India MNC: mobile network code, such as 00 for India MSIN: mobile subscriber identification number, which is a 11-digit decimal numeral 3. Mobile Station Identification Number (MIN) MIN implements mobile station identification as defined by the AMPS standard. The structure of MIN is shown in Fig. 1-12.
NA P
In which,
BD 0H 2H + H 1H 3 + A C
NPA: numbering plan area; H0H1H2H3: the same as H1H2H3 in DN; ABCD: subscriber number. 4. Temporary Local Directory Number (TLDN) When a mobile subscriber is called, the MSC temporarily assigns a number to the mobile subscriber to enable the network to perform route selection. The number structure is shown in Fig. 1-13.
Fig. 1-13 Structure of TLDN
Version 1 Revision 0 ESN is a number that exclusively identifies one mobile station device, and an exclusive ESN is assigned to each mobile station. It contains 32 bits. The supplier of the mobile station sets the equipment serial number. 6. System Identifier (SID) and Network Identifier (NID) In the CDMA network, a pair of identifier numbers (SID and NID) jointly identifies a mobile service local network. The system identifier (SID) contains 15 bits. The network operator assigns the SID and NID. 0 an 65535 of the NID are reserved. 0 indicates those base stations that do not belong to specific NID areas in a certain SID area, while 65535 indicates the mobile subscriber can roam in the whole SID. 7. Registration Zone Identifier (REG_ZONE) REG_ZONE is a number that exclusively identifies a location area in the SID area or NID area. Containing 12 bits, it is assigned by the network operator, as long as it is not repeated in the SID or NID range. 8. GT Number Setting In all messages, the GTI (GT Indication) of the SCCP layer is set as 4. When the mobile station roams to a new visited MSC, the visited MSC sends messages to the HLR for the first time (registration message and registration authentication message). The calling GT of this message SCCP layer should be set as the MSC number of this MSC, with the translation type (TT) set as 0; the called GT of the SCCP layer should be set as the IMSI number of the mobile station, with TT set as 0. When the mobile station is called, the originating MSC sends messages to the HLR. The calling GT of this message SCCP layer should be set as the MSC number of this originating MSC, with the translate type (TT) set as 0; the called GT of the SCCP layer should be set as the MDN number of the called mobile station, with TT set as 0. When the mobile station sends short messages, the messages can be transferred via the MC to which the calling mobile station belongs. The called GT of this message SCCP layer sent to the MC should be set as the MDN number of the mobile station, with TT set as 128. The calling GT should be set as the MSC number of the calling mobile station service MSC, with TT set as 0. BRBRAITT Jabalpur, Issued in March-2007 116
Version 1 Revision 0 When the mobile station receives short messages, the messages can be transferred via the MC to which the called mobile station belongs. The called GT of this message SCCP layer sent to the MC should be set as the MDN number of the mobile station, with TT set as 128. The MSC IN, Sender IN and Destination Address parameters in the MAP (ANSI41) messages should be set as the corresponding GT numbers. The SCCP layers in other MAP and WIN messages should all be set with corresponding GT information. 9. Base Station Identifier (BSID) As a 16-bit integer, BSID exclusively identifies a base station under an NID. It is assigned by the network operator.
117