Professional Documents
Culture Documents
Warning
To prevent electric shock or other injury, please do not disassemble or
repackage this product.
To prevent a fire, electric shock, or device malfunction, please do not use this
product in a wet environment such as a bathroom.
During operation, do not expose the product in areas above 55°C (131°F) or
below 5°C(41°F).
Avoid placing the product near a source of heat or in an area with strong
magnetic fields or excessive vibration, or exposing it to sunlight (even through
windows).
Never insert any metallic subject into the device to avoid any risk of electrical
shock, fire, short-circuiting or danagerous emission.
This product is an electronic device; please avoid dropping it or subjecting it to
other severe shock.
Do not place heavy objects on the top of the product or use excessive force on
it.
Avoid squeezing the product to prevent damage of the internal HDD.
Notice
Carefully unpack the contents of the product package.
Apacer doesn’t take any responsibility for data loss or damage during operation.
For some old computers, the power supplied by the USB port is less than the
repuired 5V DC. In this instance, please connect the spare USB type A connector
of the USB Y-cable or power sharing cable to a second USB port on the PC/NB,
or use the 5V power adapter. This will provide the necessary additional power
to run the drive.
Do not disconnect the product while formatting, uploading or downloading,
otherwise it may cause a program error
When transferring files, do not turn the power off or restart this device. No
responsibility is provided for any damage to or loss of any program, data, or
other information stored on any media or any part of this device serviced
hereunder.
1
Table of contents
2
λ Chapter 1. Introduction
Congratulations on your purchase of the Apacer Share Steno 2.5” SATA Hard Drive.
Before operating the unit, please read this manual thoroughly and keep it for
future reference. This manual will help you learn to use many of the exciting
features of this device and make your experience more enjoyable.
3
λ Chapter 3. Diagram of AC203
4
Note:
1. For some old computers, the power supplied by the USB port is less than the
repuired 5V DC. In this instance, please connect the spare USB type A connector
of the USB Y-cable or power sharing cable to a second USB port on the PC/NB,
or use the 5V power adapter. This will provide the necessary additional power
to run the drive.
2. Never disconnect AC203 from a Computer during data transfer.
3. To prevent data loss, always use “Safe To Remove Hardware” in Windows OS.
5
The screen of “Computer Management”
3. Select “Disk Management” under “Storage”.
4. Please go to “Unallocated” disk and right-click the “New Partition” item. On
the first page of “New Partition Wizard”, click Next.
6. You can choose the formatted capacity and then press “Next”.
8. Choose the formatting Partition type. For Windows ME/ 2000/ XP, please
choose the FAT32 format. For Window XP Professional/ 2000 Professional/
2003, please choose the NTFS format (FAT32 is also workable). If your format
is FAT32, there is a limitation at 4 GB for any single file.However, there is
practically no limitation for the NTFS format.
Software installation
1. Please find the backup
software from inside of Hard
Disk and choose “PCClone EX
Lite” folder.
10
4. Click “Install” to next.
11
One Touch Backup
One Toch Backup function only supports the external HDD case with button design--It
won't set comprehensive steps for backup anymore, only use the button on the external
HDD case.
Note: when you click the button for backup, the icon of PCClone EX Lite must be staying
at the notification area.(For first time using, please refer to the context of "File backup"
and "Setup".)
The USB driver of Win 98SE/ME to the button trigger support has not unified, therefore,
this support in Win98SE/Me does not definite exactly.
12
5. When the backup is in
progress, PCClone EX Lite
diagram will be blinking at
the notification area. There
is a dialog box will be
displayed the progress every
single 10 percentages.
Quick Launch
14
6. When backup is in progress,
the widow shows progress
and proceed time)
7. When backup is done, click
“OK” for backup finish! (The
file backup has been
successfully through PCClone
EX Lite into USB HDD.)
File Backup
1. File Backup.
2. File Restore.
15
1. Please plug the USB HDD into
the computer, and turn on
the power.
2. Execute PCClone EX Lite.
3. Click“File backup”.
4. Select folders / drives from
the fix device.
5. Set one of USB devices for
backup.
(Please refer to “Setup”, and
then set some options for the
first time using.)
16
7. Backup is completed, please
press “OK”.
17
File Restore
1. Please plug the USB HDD.
2. Execute PCClone EX Lite.
3. Go on the PCClone EX Lite
screen.
4. Click “File Backup”.
5. Select folders/files of USB
device you would like to
restore.
18
7. When “Restore” is finished,
please press “OK”.
19
File Manager
PCClone EX Lite File Manager is the same function as Windows Explorer. Directly cut and
paste folders/files between two windows of local and USB HDD. It is convenient for users
who can review/manage/ move/access their folders/files directly without clicking the
"My computer" or "Windows Explorer".
21
Please click the icon of
“PCClone EX Lite”on the right
side of upper corner of
screen,“Help PCClone EX”dialog
will display and assist to
recognize PCClone EX Lite.
22
λ Chapter 9. Troubleshooting
If you experience a problem, please check the following chart for help.
Problem Causes
Power will not turn on Make sure that the product is properly
connected to the USB port on your computer.
Make sure that the USB port is working
properly.
The product is not Make sure that the product is properly
recognized by the computer connected to the USB port on your computer.
The product may not be receiveing enough
power from your computer. Try connecting the
USB power sharing cable or the spare large end
of the USB Y cable to a secord USB port in your
computer, or the 5V power adapter. Avoid
connecting the product through an USB Hub,
unless the USB Hub is connected to a DV power
adapter.
Make sure that the USB cable is working.
Make sure that the product has been
formatted.
Make sure that the operating system supports
the file system.
Actual memory capacity is Small discrepancies are due to different file
different from what is listed formats and algorithms used by various operating
on package systems.
The product is working Make sure that your system operates at USB 2.0
slowly speed.
23
λ Chapter 10. Service and Support
Please contact our local distributor or our customer service center, if you have
any technical problems.
HDD SPEC
Interface USB 2.0 2.5” SATA hard drive (optional)
Capacity Capacity: 320GB/500GB/640GB
Rotational Speed 5400 rpm
Cache 8MB
Device SPEC
Interface USB 2.0
Data Transfer Rate Up to 480 Mbps
LED Display Light for power on
Blinking for data access
Power Supply USB powered
Software Backup Software for Windows 2000/XP/Vista/7
only
Certification CE, FCC, BSMI
Dimensions / Weight 130 (L) x 81.2(W) x 13.4(H) mm / 84 g
Operating temperature 5°C ~ 55°C (41°F ~ 131°F)
Operating humidity 10% ~ 75%
Support O/S For USB 2.0 SATA Hard Drive
Windows ME/2000/XP/Vista; Mac OS X 10.3 and
above
Supported file system FAT32 , NTFS , HFS+
Accessories USB Y Cable, Quick Start Guide, Carry Bag
The contents of this manual are subject to change without prior notice for further
improvement.
24
The copyright on this user manual remains with
out company. No part of this user manual may be
transmitted, reproduced or changed. The product
specifications, design and this user manual’s
content are subject to change without notice.